Most current Global System for Mobile Communications （GSM） frequency planning methods evaluate the interference and assign frequencies based on measurement reports. Assigning the same or adjacent frequencies to cell...Most current Global System for Mobile Communications （GSM） frequency planning methods evaluate the interference and assign frequencies based on measurement reports. Assigning the same or adjacent frequencies to cells close to each other will introduce co-channel and adjacent channel interference which will reduce network performance. Traditionally, man power is used to check and allocate new frequencies which is time consuming and the accuracy is not satisfactory. This paper presents an intelligent analysis method for optimization of co-channel and adjacent channel interference by exploiting cell configuration information. The method defines an interference evaluation model by analyzing various factors such as the base station layer, the azimuth ward relationship, and the cell neighborhood relationships. The interference for each frequency is evaluated and the problem frequencies are optimized. This method is verified by a large number of actual datasets from an in-service GSM network. The results show this method has better intelligence, accuracy, timeliness, and visualization than traditional methods.展开更多
A digital predistorted class-F power amplifier （PA） using Cree GaN HEMT CGH40010 operating at 2. 12 GHz is presented to obtain high efficiency and excellent linearity for wideband code-division multiple access （ WC...A digital predistorted class-F power amplifier （PA） using Cree GaN HEMT CGH40010 operating at 2. 12 GHz is presented to obtain high efficiency and excellent linearity for wideband code-division multiple access （ WCDMA ） applications. Measurement results with the continuous wave （CW） signals indicate that the designed class-F PA achieves a peak power-added efficiency （PAE） of 75. 2% with an output power of 39.4 dBm. The adjacent channel power ratio （ACPR） of the designed PA after digital predistortion （DPD） decreases from -28. 3 and -27. 5 dBc to -51.9 and -54. 0 dBc, respectively, for a 4-carrier 20 MHz WCDMA signal with 7. 1 dB peak to average power ratio （PAPR）. The drain efficiency （DE） of the PA is 37. 8% at an average output power of 33. 3 dBm. The designed power amplifier can be aoolied in the WCDMA system.展开更多
The performance analysis and simulation of spectrally efficient modulation schemes , MPSK and MQAM, for Ka-band fixed satellite communication system are provided. The effects of bandwidth limitation, nonlinearityity d...The performance analysis and simulation of spectrally efficient modulation schemes , MPSK and MQAM, for Ka-band fixed satellite communication system are provided. The effects of bandwidth limitation, nonlinearityity distortion and adjacent channel interference (ACI) in Ka-band satellite channel corrupted by additive white Gaussian noise (AWGN) are taken into account. The analytical expressions of the HER of coherent MPSK and MQAM signal are obtained and shown to be in good agreement with the simulation results.展开更多
A 2-GHz radio frequency transceiver is presented and implemented for third generation mobile communications using wide-band code division multiple access （WCDMA） scheme. Performance measuring systems are introduced ...A 2-GHz radio frequency transceiver is presented and implemented for third generation mobile communications using wide-band code division multiple access （WCDMA） scheme. Performance measuring systems are introduced for transmitter channel and receiver sensitivity, respectively. The transceiver achieves maximum output power of 22 dBm, dynamic range of 85 dB, adjacent channel power rejection ratio （ACPR） of -41dB@5MHz, and receiver sensitivity of-119.6 dBm for 128-kb/s data at 3.84-Mcps spreading rate. The measured results indicate the conformity to the required commercial 2.0-GHz WCDMA specification and 3GPP requirements.展开更多
This paper presents the circuit design and measured performance of a multi-band tuner for mobile TV applications. The tuner RFIC is composed of a wideband front-end, an analog baseband, a full integrated fractional- N...This paper presents the circuit design and measured performance of a multi-band tuner for mobile TV applications. The tuner RFIC is composed of a wideband front-end, an analog baseband, a full integrated fractional- N synthesizer and an Iac digital interface. To meet the stringent adjacent channel rejection （ACR） requirements of mobile TV standards while keeping low power consumption and low cost, direct conversion architecture with a local AGC scheme is adopted in this design. Eighth-order elliptic active-RC filters with large stop band attenuation and a sharp transition band are chosen as the channel select filter to further improve the ACR preference. The chip is fabricated in a 0.35-#m SiGe BiCMOS technology and occupies a silicon area of 5.5 mm2. It draws 50 mA current from a 3.0 V power supply. In CMMB application, it achieves a sensitivity of-97 dBm with 1/2 coding QPSK signal input and over 40 dB ACR.展开更多
基金Supported by the National Key Projects of Science and Technology of China (No. 2010ZX03005-003)
文摘Most current Global System for Mobile Communications （GSM） frequency planning methods evaluate the interference and assign frequencies based on measurement reports. Assigning the same or adjacent frequencies to cells close to each other will introduce co-channel and adjacent channel interference which will reduce network performance. Traditionally, man power is used to check and allocate new frequencies which is time consuming and the accuracy is not satisfactory. This paper presents an intelligent analysis method for optimization of co-channel and adjacent channel interference by exploiting cell configuration information. The method defines an interference evaluation model by analyzing various factors such as the base station layer, the azimuth ward relationship, and the cell neighborhood relationships. The interference for each frequency is evaluated and the problem frequencies are optimized. This method is verified by a large number of actual datasets from an in-service GSM network. The results show this method has better intelligence, accuracy, timeliness, and visualization than traditional methods.
基金The National Natural Science Foundation of China(No.60702163)the National Science and Technology Major Project(No.2010ZX03007-002-01,2011ZX03004-003)
文摘A digital predistorted class-F power amplifier （PA） using Cree GaN HEMT CGH40010 operating at 2. 12 GHz is presented to obtain high efficiency and excellent linearity for wideband code-division multiple access （ WCDMA ） applications. Measurement results with the continuous wave （CW） signals indicate that the designed class-F PA achieves a peak power-added efficiency （PAE） of 75. 2% with an output power of 39.4 dBm. The adjacent channel power ratio （ACPR） of the designed PA after digital predistortion （DPD） decreases from -28. 3 and -27. 5 dBc to -51.9 and -54. 0 dBc, respectively, for a 4-carrier 20 MHz WCDMA signal with 7. 1 dB peak to average power ratio （PAPR）. The drain efficiency （DE） of the PA is 37. 8% at an average output power of 33. 3 dBm. The designed power amplifier can be aoolied in the WCDMA system.
文摘The performance analysis and simulation of spectrally efficient modulation schemes , MPSK and MQAM, for Ka-band fixed satellite communication system are provided. The effects of bandwidth limitation, nonlinearityity distortion and adjacent channel interference (ACI) in Ka-band satellite channel corrupted by additive white Gaussian noise (AWGN) are taken into account. The analytical expressions of the HER of coherent MPSK and MQAM signal are obtained and shown to be in good agreement with the simulation results.
文摘A 2-GHz radio frequency transceiver is presented and implemented for third generation mobile communications using wide-band code division multiple access （WCDMA） scheme. Performance measuring systems are introduced for transmitter channel and receiver sensitivity, respectively. The transceiver achieves maximum output power of 22 dBm, dynamic range of 85 dB, adjacent channel power rejection ratio （ACPR） of -41dB@5MHz, and receiver sensitivity of-119.6 dBm for 128-kb/s data at 3.84-Mcps spreading rate. The measured results indicate the conformity to the required commercial 2.0-GHz WCDMA specification and 3GPP requirements.
文摘This paper presents the circuit design and measured performance of a multi-band tuner for mobile TV applications. The tuner RFIC is composed of a wideband front-end, an analog baseband, a full integrated fractional- N synthesizer and an Iac digital interface. To meet the stringent adjacent channel rejection （ACR） requirements of mobile TV standards while keeping low power consumption and low cost, direct conversion architecture with a local AGC scheme is adopted in this design. Eighth-order elliptic active-RC filters with large stop band attenuation and a sharp transition band are chosen as the channel select filter to further improve the ACR preference. The chip is fabricated in a 0.35-#m SiGe BiCMOS technology and occupies a silicon area of 5.5 mm2. It draws 50 mA current from a 3.0 V power supply. In CMMB application, it achieves a sensitivity of-97 dBm with 1/2 coding QPSK signal input and over 40 dB ACR.
