Adaptive admittance tracking control for interactive robot with prescribed performance

An adaptive control approach is presented in this paper for tracking desired trajectories in interactive manipulators. The controller design incorporates prescribed performance functions (PPFs) to improve dynamic performance. Notably, the performance of the output error is confined in an envelope characterized by exponential convergence, leading to convergence to zero. This feature ensures a prompt response from admittance control and establishes a reliable safety framework for interactions. Simulation results provide practical insights,demonstrating the viability of the control scheme proposed in this paper.

Sound propagation in inhomogeneous waveguides with sound-speed profiles using the multimodal admittance method

The multimodal admittance method and its improvement are presented to deal with various aspects in underwater acoustics,mostly for the sound propagation in inhomogeneous waveguides with sound-speed profiles,arbitrary-shaped liquid-like scatterers,and range-dependent environments.In all cases,the propagation problem governed by the Helmholtz equation is transformed into initial value problems of two coupled first-order evolution equations with respect to the modal components of field quantities(sound pressure and its derivative),by projecting the Helmholtz equation on a constructed orthogonal and complete local basis.The admittance matrix,which is the modal representation of Direchlet-to-Neumann operator,is introduced to compute the first-order evolution equations with no numerical instability caused by evanescent modes.The fourth-order Magnus scheme is used for the numerical integration of differential equations in the numerical implementation.The numerical experiments of sound field in underwater inhomogeneous waveguides generated by point sources are performed.Besides,the numerical results computed by simulation software COMSOL Multiphysics are given to validate the correction of the multimodal admittance method.It is shown that the multimodal admittance method is an efficient and stable numerical method to solve the wave propagation problem in inhomogeneous underwater waveguides with sound-speed profiles,liquid-like scatterers,and range-dependent environments.The extension of the method to more complicated waveguides such as horizontally stratified waveguides is available.

Three-dimensional admittance analysis of lithospheric elastic thickness over the Louisville Ridge

Using bathymetry and altimetric gravity anomalies, a 1°×9 1° lithospheric effective elastic thickness（Te） model over the Louisville Ridge and its adjacent regions is calculated using the moving window admittance technique. For comparison, three bathymetry models are used： general bathymetric charts of the oceans, SIO V15.1,and BAT_VGG. The results show that BAT_VGG is more suitable for calculating T e than the other two models. T e along the Louisville Ridge was re-evaluated. The southeast of the ridge has a medium Te of 10–20 km, while Te increases dramatically seaward of the Tonga-Kermadec trench as a result of the collision of the Pacific and IndoAustralian plates.

Determination of interface states and their time constant for Au/SnO_2 /n-Si (MOS) capacitors using admittance measurements

The frequency dependence of admittance measurements （capacitance–voltage （C–V ） and conductance–voltage （G/ω–V ）） of Au/SnO2 /n-Si （MOS） capacitors was investigated by taking into account the effects of the interface states （N ss ） and series resistance （Rs ） at room temperature. Admittance measurements were carried out in frequency and bias voltage ranges of 1 kHz–1 MHz and （ 5V）–（＋9V）, respectively. The values of N ss and R s were determined by using a conductance method and estimating from the admittance measurements of the MOS capacitors. At low frequencies, the interface states can follow the AC signal and yield excess capacitance and conductance. In addition, the parallel conductance （G p /ω） versus log（f） curves at various voltages include a peak due to the presence of interface states. It is observed that the N ss and their time constant （τ） range from 1.23 ×10 12 eV-1 ·cm-2 to 1.47 ×10 12 eV-1 ·cm-2 and from 7.29 ×10-5 s to 1.81 ×10-5s, respectively.

Input Admittance and Current Distribution of Infinitely Long Circular Cylindrical Antenna Driven at Center

In this paper, by change of integration path in complex spectrum domain and by defining input admittance as the ratio of complex radiated power to amplitude of square of voltage across the gap, new expressions of admittance (valid for all frequencies ) of infinitely long cylindrical antenna with and without conducting ground are obtained. Meanwhile corresponding formulas of current distribution are derived in detail. Some numerical computations are also given.

Electric admittance analysis of quartz crystal resonator in thickness-shear mode induced by array of surface viscoelastic micro-beams

The electric admittance of a compound system composed of a thickness-shear mode （TSM） quartz crystal resonator （QCR） and an array of surface viscoelastic micro-beams （MBs） is studied. The governing equations of the MBs are derived from the Timoshenko-beam theory in consideration of shear deformation. The electrical admittance is described directly in terms of the physical properties of the surface epoxy resin （SU-8） MBs from an electrically forced vibration analysis. It is found that both the inertia effect and the constraint effect of the MBs produce competitive influence on the resonant frequency and admittance of the compound QCR system. By further comparing the numerical results calculated from the Timoshenko-beam model with those from the Euler-beam model, the shear deformation is found to lead to some deviation of an admittance spectrum. The deviations are revealed to be evident around the admittance peak（s） and reach the maximum when a natural frequency of the MBs is identical to the fundamental frequency of the QCR. Besides, a higher order vibration mode of the MBs corresponds to a larger deviation at the resonance.

Game Analysis of Rational FRS on Market Admittance

The dynamic signaling game-model is employed to study countermeasures of Q, U and C for supply-demand on financial market. As the game result, the mixed equilibrium of Q and U exists naturally without FRS. It is concluded that FRS on market admittance is objective demand of financial market, also the rational management behavior of government FRSI. And in addition to the empirical criteria, the FRS agreements between FRSI and financial-institutions should be considered as one of advanced FRS techniques. These must cover:① the regulation conformed status investigation with sufficient frequency,② corresponding punitive measures with sufficient strength. Thus the information can be delivered FRSI have ensured only qualified and regulation-conformed financial-institutions could be allowed to enter. That could safeguard the steadiness of the financial market.

Using an Off-the-Shelf Lock-In Detector for Admittance Spectroscopy in the Study of Plants

We report on the development of an electrical characterization admittance spectroscopy equipment and method based on an off-the-shelf lock-in detector that is cheap and yet highly sensitive. It is concluded that a contacted constant-pressure electrode configuration is preferable. It was further determined that the temperature does not have great impact in the measured values, but relative humidity of air can be important, especially in the constant-gap electrode configuration. In-situ measurements are difficult since the coupling of the plant with the environment is of high importance. Another aspect is the cables;they are important in that they have to be terminated by their characteristic impedance (50 Ω?in our case) to avoid reflections that introduce artificial attenuation and phase shifts in the signal. We introduce a fingerprint plot type to be able to distinguish between various plants and other specimens, and can actually detect the aqueous state of a plant.

VDTA Based Electronically Tunable Voltage-Mode and Trans-Admittance Biquad Filter

In this paper, a biquad filter configuration based on two voltage differencing transconductance amplifiers (VDTAs) as newly active elements and only two capacitors as passive elements is proposed which can realize voltage-mode low pass (LP), band pass (BP), high pass (HP), band reject (BR) and all pass (AP) filtering responses using three voltage inputs. Simultaneously, the same configuration can also be used to obtain LP, BP and HP filtering responses in transadmittance-mode. The proposed biquad is capable of providing electronic control of quality factor independent of pole frequency through single transconductance parameter (biasing current). It also offers the advantage of low active and passive sensitivity. To support the theoretical analysis, the PSPICE simulation of the proposed circuit is done using 0.18 μm CMOS technology from TSMC.

Computing of Mutual Admittance between Two Circumferential Slots on Cylindrical Waveguide

This paper studies radiation from circumferential slots on cylindrical waveguide by Poynting’s vector method. It can help us to find mutual admittance between two circumferential slots in an antenna array. The main advantage of Poynting’s vector method is its accurate convergence to compute mutual admittance between two circumferential slots. The importance of this matter will be more salient while we want to compare it with other mutual admittances and also use it to optimize an antenna array.

Least Squares Hermitian Problem of Matrix Equation (<i>AXB</i>, <i>CXD</i>) = (<i>E</i>, <i>F</i>) Associated with Indeterminate Admittance Matrices

For A&#8712;Cm&#935;n, if the sum of the elements in each row and the sum of the elements in each column are both equal to 0, then A is called an indeterminate admittance matrix. If A is an indeterminate admittance matrix and a Hermitian matrix, then A is called a Hermitian indeterminate admittance matrix. In this paper, we provide two methods to study the least squares Hermitian indeterminate admittance problem of complex matrix equation (AXB,CXD)=(E,F), and give the explicit expressions of least squares Hermitian indeterminate admittance solution with the least norm in each method. We mainly adopt the Moore-Penrose generalized inverse and Kronecker product in Method I and a matrix-vector product in Method II, respectively.

Measurement and Analysis of Mechanical Admittance of Gun-Shoulder System

Lots of factors have influence on the firing accuracy of automatic weapon. During firing,the movement state of gun-shoulder system can be varied due to the impulsion of powder gases and the impact of moving parts,resulting in a gunpoint being deviated from initial value to decrease the firing accuracy of weapon. The development of intelligent controlling gun carriage for weapon system is necessary for reflect its automatic firing accuracy objectively. An electronic measuring system for measuring the receiving force and movement of gun-shoulder system under initiative state is built based on the characteristics of standing non-rest automatic weapon. The constitutes of measuring system and the correction method of shoulder receiving force are described,and the mechanical admittance function of gun-shoulder system is obtained using electronically measured data,the modal identification of admittance functions of gun-shoulder system is made by adopting the orthogonal component method,and the key difference between the passive state and initiative state of standing non-rest automatic weapon is discussed.

基于模糊控制的上肢康复机器人变导纳控制

传统固定参数的导纳模型无法对上肢康复机器人的柔顺性实时调节,而现有变参数导纳模型需要结合实际康复需求进行改善。为此,以自主研发的串并混联的末端牵引式上肢康复机器人为研究对象,结合模糊控制与导纳控制,提出了一种面向实际康复需求的新型变导纳控制策略,制定了4条有利于康复效率与安全的模糊规则。该策略利用交互力误差及其变化率作为模糊控制输入,实时改变导纳模型的参数,实现柔顺性自主调节。仿真和实验结果验证了所提出的变导纳模型控制策略可行性和所制定的4条模糊规则的有效性。在患者可适应训练强度的场景中,相较于固定导纳模型,变导纳模型追踪给定路径时产生的冗余路径最多可降低56.13%,提高了康复训练效率;当康复运动超出患者可承受范围时,变导纳模型可提前0.5 s改变追踪路径,提高了康复的安全性。

弱电网下并网变流器相位裕度的分频段补偿方法

在弱电网条件下,针对并网变流器各控制环节与电网阻抗之间交互作用,容易引发系统振荡而造成失稳问题,文中提出一种分频段相位补偿控制策略。首先,建立dq坐标下的并网变流器输出导纳矩阵模型,针对在低频段由锁相环引起的变流器输出导纳的负阻尼特性,不改变锁相环动态特性而通过分析锁相环对控制系统的影响路径,加入含积分元素的补偿矩阵抵消锁相环的负阻尼影响,同时简化导纳模型;进而,引入仅含常数元素的补偿矩阵实现超前校正,对电流环带宽外的负阻尼进行相位补偿,使导纳矩阵元素在全频段为正实部,为并网控制系统提供正阻尼,从而增强并网变流器的稳定性。最后,通过仿真和实验在不同短路比条件下对文中提出的补偿方案进行验证,证明所提方案的有效性。

基于轨迹修正的曲面抛光机器人终端滑模导纳控制

针对传统抛光机器人力控制算法在位置内环控制上稳定性差的问题,同时为减小力/位控制算法相互切换导致的抛光轨迹误差,提出一种基于轨迹修正的终端滑模导纳控制方法。在抛光过程中,将力传感器反馈的参数与期望力的差值作用于导纳模型产生位置修正量,设计了终端滑模控制模型作为位置内环控制环节,并通过实时反馈位置修正量进行轨迹跟踪。通过实际轨迹信息修正规划轨迹来减小抛光力误差,达到高精度抛光的效果。仿真实验表明,终端滑模导纳控制效果良好,在对轨迹进行修正后抛光力误差相对于修正前有明显改善。利用该模型抛光后表明,轮廓算数平均偏差达到0.035μm,抛光质量得到明显提高。

融合灭弧信息的有源串联接地配电网故障检测方法

为了优化有源全补偿消弧设备和挖掘灭弧状态信息包含的故障特征,该文提出基于串联分压的配电网消弧原理及融合灭弧状态信息的接地故障检测方法。提出采用单个H桥变流器与消弧线圈串联的有源降压消弧全补偿方法和灵活接入保护电容的有源消弧装置保护方案,在消弧原理与控制、设备承压与安全、功率输出与过压防护等方面表现出良好性能。提出融合有源降压消弧全补偿“伪正常”状态信息的接地故障检测方法,利用系统正常-故障-灭弧3种状态信息构造故障检测判据,在免受过渡电阻和分布参数不对称影响的基础上优化故障检测方式和提高故障检测效率,无需线路间信息的横向比较即可实现系统全域零序导纳测量、故障馈线独立判别和故障程度跟踪识别。仿真实验证实了方法的有效性,为优化配电网有源消弧和接地故障检测提供创新方案。

不对称工况模块化多电平换流器稳定性分析的矩阵降维

模块化多电平换流器(MMC)在对称工况下的建模与稳定性分析已经得到了广泛关注。实际工程中的MMC会处于不对称运行工况,如桥臂电感不对称、交流侧电压不对称等,不对称工况下的导纳建模与稳定性分析需要进一步展开研究。目前,考虑系统多频耦合的导纳模型与定量的导纳降维方法是不对称工况稳定性分析的难点。因此,文中主要建立了适用于不对称工况的MMC导纳模型,并对适用于MMC不对称工况下小扰动稳定性分析的矩阵降维方法展开研究。该降维方法基于导纳矩阵的向量范数,适用于“黑箱”系统及各种不对称工况,可定量评估各阶导纳矩阵的降维误差量。以中国鲁西背靠背异步联网工程广西侧为例,通过PSCAD/EMTDC电磁暂态仿真验证了所建模型的准确性及所提降维方法在多种不对称工况下的适用性。

海上风电场经柔直送出系统的虚拟导纳中频振荡抑制策略

随着柔性直流输电技术在远海风电的广泛应用,海上换流站接入远海风电场时出现了中频振荡现象,严重危害系统安全稳定运行。为此,提出了一种基于虚拟导纳的中频振荡抑制策略。首先,采用模块化状态空间法建立了海上风电场经柔直送出系统的小信号模型。然后,采用参与因子分析方法揭示了影响中频振荡的关键因素,并分析了各关键因素对中频振荡的影响特性。在此基础上,提出在柔直控制系统中添加虚拟导纳的阻尼控制策略,并基于阻尼控制器对中频、LCL振荡的差异影响划分了控制器参数的稳定域。最后,在Matlab/Simulink中搭建时域仿真模型。结果表明,所提策略在系统不同运行工况下均可有效抑制中频振荡,提高了系统稳定性。

神经网络阻尼比模型及工业机器人导纳控制

在工业机器人打磨过程中,环境刚度随未知环境的变化,将对力控制精度产生不利的影响,针对环境刚度变化的问题,该文提出一种基于神经网络阻尼比模型的自适应导纳控制方法。在导纳控制设计中,根据力误差与系统阻尼比之间的机理关系,设计激励函数,构造神经网络阻尼比模型;通过该模型使阻尼比在线调整,适应末端环境的刚度变化,实现力到位置自适应转换的导纳控制。与常规导纳控制进行仿真比较,结果表明所提出的力控制策略力误差更小,响应速度更快,能适应变刚度的未知打磨环境。

工业机器人变导纳自适应主动容错控制方法研究

针对受外界干扰、执行器故障及环境交互影响的工业机器人系统,提出一种位置控制为自抗扰的工业机器人变导纳自适应主动容错控制方法。首先,设计自抗扰控制器,在实现位置跟踪的同时消除外部干扰对执行器的影响。其次,为获得实际作业中除外部干扰的关节内部精确故障信息,在位置控制基础上引入自适应主动容错机制,对机器人的控制过程中出现的故障进行检测和补偿。最后,利用变导纳控制器,通过在线调整导纳参数实现对机器人的末端柔顺性能的优化,以提高机器人系统的稳定性。经过仿真验证所提方法能够有效提高工业机器人的容错能力和柔顺性,在机器人控制过程中具有良好的鲁棒性和可靠性,为工业机器人的智能化和自动化提供了新思路和方法。