Pore structure of low‑permeability coal and its deformation characteristics during the adsorption–desorption of CH4/N2

The pore structure of coal plays a key role in controlling the storage and migration of CH4/N2.The pore structure of coal is an important indicator to measure the gas extraction capability and the gas displacement efect of N2 injection.The deformation characteristic of coal during adsorption–desorption of CH4/N2 is an important factor afecting CH4 pumpability and N2 injectability.The pore structure characteristics of low-permeability coal were obtained by fuid intrusion method and photoelectric radiation technology.The multistage and connectivity of coal pores were analyzed.Subsequently,a simultaneous test experiment of CH4/N2 adsorption–desorption and coal deformation was carried out.The deformation characteristics of coal were clarifed and a coal strain model was constructed.Finally,the applicability of low-permeability coal to N2 injection for CH4 displacement technology was investigated.The results show that the micropores and transition pores of coal samples are relatively developed.The pore morphology of coal is dominated by semi-open pores.The pore structure of coal is highly complex and heterogeneous.Transition pores,mesopores and macropores of coal have good connectivity,while micropores have poor connectivity.Under constant triaxial stress,the adsorption capacity of the coal for CH4 is greater than that for N2,and the deformation capacity of the coal for CH4 adsorption is greater than that for N2 adsorption.The axial strain,circumferential strain,and volumetric strain during the entire process of CH4 and N2 adsorption/desorption in the coal can be divided into three stages.Coal adsorption–desorption deformation has the characteristics of anisotropy and gas-diference.A strain model for the adsorption–desorption of CH4/N2 from coal was established by considering the expansion stress of adsorbed gas on the coal matrix,the compression stress of free gas on the coal matrix,and the expansion stress of free gas on micropore fractures.N2 has good injectability in low-permeability coal seams and has the dual functions of improving coal seam permeability and enhancing gas fow,which can signifcantly improve the efectiveness of low-permeability coal seam gas control and promote the efcient utilization of gas resources.

Experimental and Numerical Research on Water Transport during Adsorption and Desorption in Cement-Based Materials

The durability of cement-based materials is related to water transport and storage in their pore network under different humidity conditions.To understand the mechanism and characteristics of water adsorption and desorption processes from the microscopic scale,this study introduces different points of view for the pore space model generation and numerical simulation of water transport by considering the“ink-bottle”effect.On the basis of the pore structure parameters(i.e.,pore size distribution and porosity)of cement paste and mortar with water-binder ratios of 0.3,0.4 and 0.5 obtained via mercury intrusion porosimetry,randomly formed 3D pore space models are generated using two-phase transformation on Gaussian random fields and verified via image analysis method of mathematical morphology.Considering the Kelvin-Laplace equation and the influence of“ink-bottle”pores,two numerical calculation scenarios based on mathematical morphology are proposed and applied to the generated model to simulate the adsorption-desorption process.The simulated adsorption and desorption curves are close to those of the experiment,verifying the effectiveness of the developed model and methods.The obtained results characterize water transport in cement-based materials during the variation of relative humidity and further explain the hysteresis effect due to“ink-bottle”pores from the microscopic scale.

Study on the Effects of Polyacrylamide on Phosphorus Adsorption and Desorption Characteristics of Soil Aggregates

[Objective]The research aimed to provide scientific reference for reasonable utilization of polyacrylamide(PAM).[Method]After PAM treatment,the soil aggregates were classified through dry sieve analysis and the adsorption capacity and desorption capacity of all soil aggregates to phosphorus at different phosphorus concentrations were analyzed.[Result] The phosphorus adsorption and desorption of soil sample treated by PAM declined. The amount of phosphorus adsorption increased with the increase of phosphorus concentration and this increase was fast in low phosphorus concentration area but slow in high phosphorus concentration area.At different phosphorus concentrations,adsorption showed a へ shape changing trend.The phosphorus adsorption was related to phosphorus concentration and the 2-3 mm aggregate had the highest desorption rate while 0.1-0.25 mm aggregate and 0.45-1 mm aggregate had lowest desorption rate.[Conclusion]The PAM treatment generated significant influence on phosphorus adsorption and analytic features of aggregate in all size fractions.

Adsorption and Desorption Characteristics of Cadmium and Lead in Typical Paddy Soils of Jiangxi Province and Its Environmental Risk Assessment

[Objective] This study aimed to investigate the adsorption and desorption characteristics of cadmium and lead in typical paddy soils of Jiangxi Province. [Method] Gleyed paddy soil and waterloggogenic paddy soil were collected from Jiangxi Province and used as experimental materials to investigate single and com- petitive adsorption and desorption behaviors of cadmium and lead by batch equilib- rium method. The environmental risk of the presence of cadmium and lead in paddy soils was assessed using distribution coefficients. [Result] Under equal ratio condi- tions, the adsorption capacity of lead by two types of paddy soils was higher than that of cadmium, and the adsorption rate in waterloggogenic paddy soil was higher than that in gleyed paddy soil. The desorption capacity of cadmium by two types of paddy soils was higher than that of lead, and the desorption rate in gleyed paddy soil was higher than that in waterloggogenic paddy soil. Under competitive condi- tions, the adsorption capacity of cadmium and lead by paddy soils was significantly reduced compared with single ion system, while the desorption rate was remarkably improved. The potential environmental risk of cadmium contamination was greater than that of lead in paddy soils. Moreover, environmental risks of cadmium and lead were reduced with the increase of pH, which increased significantly under the coex- istence state. [Conclusion] In the coexistence of cadmium and lead, cadmium con- tamination should be controlled and avoided compared with lead contamination in paddy soils.

Adsorption and Desorption of Natural Zeolite on NH_4^+

The adsorption and desorption kinetic of natural zeolite on NH4＋ was stud-ied by lab analysis. The results showed that the adsorption and desorption kinetic of natural zeolite on NH4＋ coincided with the first-order kinetics, modified Freundlich equation, parabolic diffusion model, and heterogeneous diffusion model. The desorp-tion of the adsorbed NH4＋ was far rapider than the adsorption, which can be fin-ished within 60 min.

Insights into carbon dioxide sequestration into coal seams through coupled gas flow-adsorption-deformation modelling

Injecting carbon dioxide(CO_(2))into coal seams may unlock substantial carbon sequestration potential.Since the coal acts like a carbon filter,it can preferentially absorb significant amounts of CO_(2).To explore this further,desorption of the adsorbed gas due to pressure drop is investigated in this paper,to achieve an improved understanding of the long-term fate of injected CO_(2) during post-injection period.This paper presents a dual porosity model coupling gas flow,adsorption and geomechanics for studying coupled processes and effectiveness of CO_(2) sequestration in coals.A new adsorption?desorption model derived based on thermodynamics is incorporated,particularly,the desorption hysteresis is considered.The reliability of the proposed adsorption-desorption isotherm is examined via validation tests.It is indicated that occurrence of desorption hysteresis is attributed to the adsorption-induced pore deformation.After injection ceases,the injected gas continues to propagate further from the injection well,while the pressure in the vicinity of the injection well experiences a significant drop.Although the adsorbed gas near the well also decreases,this decrease is less compared to that in pressure because of desorption hysteresis.The unceasing spread of CO_(2) and drops of pressure and adsorbed gas depend on the degree of desorption hysteresis and heterogeneity of coals,which should be considered when designing CO_(2) sequestration into coal seams.

Adsorption/desorption behavior between a novel amphoteric granular lignin adsorbent and reactive red K-3B in aqueous solutions

A novel amphoteric granular lignin adsorbent(AGLA) was prepared using magnesium lignosulfonate as a raw material which was provided by a straw sulfite pulp mill in Guangdong Province, China. A reactive dye(red K-3B) was used as an adsorbate to investigate the adsorption behavior by static and mobile ways. The removal of reactive red K-3B was found to be initially pH and concentration dependent. Moreover, an increase of solution temperature ranging from 5℃ to 60℃ helped to enhance the rate of intraparticle diffusion of adsorbate and changes in the size of the pores of the adsorbent and thus to reduce the adsorption time. The total breakthrough adsorption capacity was 531 mg/g, and the saturated adsorption capacity was 560 mg/g, which prevailed over the activated carbons evidently. The reactive red K-3B adsorbed on AGLA could be recovered with a mixture of alcohol, NaCl and HCl aqueous solutions. The recovery percentage could reach 92.4%.

Effect of dissolved organic matter on adsorption and desorption of mercury by soils

Effects of dissolved organic matter (DOM) on adsorption and desorption of Hg were investigated in two kinds of soils, Xanthi-Udic Ferralosols (XUF) and Typic Purpli-Udic Cambosols (TPUC). The DOM was obtained from humus soil (DOMH), rice straw (DOMR), and pig manure (DOMP). The presence of DOM obviously reduced Hg maximum adsorption capacity with up to 40% decreases over the control, being an order of DOMH (250.00 mg/kg)< DOMR (303.03 mg/kg) < DOMP (322.58 mg/kg) < CK (control 416.67 mg/kg) for the...

Adsorption and desorption of Cu(Ⅱ) and Pb(Ⅱ) in paddy soils cultivated for various years in the subtropical China

The adsorption and desorption of Cu（Ⅱ） and Pb（Ⅱ） on upland red soil,and paddy soils which were originated from the upland soil and cultivated for 8,15,35 and 85 years,were investigated using the batch method.The study showed that the organic matter content and cation exchange capacity （CEC） of the soils are important factors controlling the adsorption and desorption of Cu（Ⅱ） and Pb（Ⅱ）.The 15-Year paddy soil had the highest adsorption capacity for Pb（Ⅱ）,followed by the 35-Year paddy soil.Both the 35-Year paddy soil and 15-Year paddy soil adsorbed more Cu（Ⅱ） than the upland soil and other paddy soils.The 15-Year paddy soils exhibited the highest desorption percentage for both Cu（Ⅱ） and Pb（Ⅱ）.These results are consistent with the trend for the CEC of the soils tested.The high soil CEC contributes not only to the adsorption of Cu（Ⅱ） and Pb（Ⅱ） but also to the electrostatic adsorption of the two heavy metals by the soils.Lower desorption percentages for Cu（Ⅱ） （36.7% to 42.2%） and Pb（Ⅱ） （50.4% to 57.9%） were observed for the 85-Year paddy soil.The highest content of organic matter in the soil was responsible for the low desorption percentages for the two metals because the formation of the complexes between the organic matter and the metals could increase the stability of the heavy metals in the soils.

Adsorption-desorption behavior of acetochlor to soils in the presence of some environmental substances

The behavior of herbicide acetochlor adsorption desorption to soil in the presence of humic acid (HA), anionic surfactant sodium dodecylbenzene sulfonate (SDBS), cationic surfactant hexadecyltrimethyl ammonium bromide (HDAB) and NH 4NO 3 as a chemical fertilizer was studied. Observed acetochlor adsorption isotherm were well described using Freundlich isotherm equation, from which the desorption isotherm equation has been deduced. The deduced equation can more directly describe acetochlor desorption process. The results showed that the enhance of acetochlor adsorption capacity by solid HA was greater than by soluble HA. The presence of NH 4NO 3 can slightly enhance acetochlor adsorption to soil by comparison with that measured in NH 4NO 3 free solution. In soil water system, surfactant acetochlor interaction is very complex, and the surfactant adsorptions as well as acetochlor adsorption need to be considered. When acetochlor soil suspensions contained lower concentration SDBS or HDAB (40 mg/L), K f for acetochlor adsorption was decreased in comparison to that measured in SDBS or HDAB free solution. When acetochlor soil suspensions contained higher concentration SDBS or HDAB (corresponding 1400 mg/L or 200 mg/L), K f for acetochlor adsorption was increased in comparison to that measured in SDBS or HDAB free solution.

Coalbed methane adsorption and desorption characteristics related to coal particle size

Effects of particle size on CH4 and CO2adsorption and desorption characteristics of coals are investigated at 308 K and pressures up to 5.0 MPa.The gas adsorption and desorption isotherms of coals with particle sizes ranging from 250 μm to 840 μm are measured via the volumetric method,and the Langmuir model is used to analyse the experimental results.Coal particle size is found to have an obvious effect on the coal pore structure.With the decrease of coal particle size in the process of grinding,the pore accessibility of the coal,including the specific surface area and pore volume,increases.Hence,coal with smaller particle size has higher specific surface area and higher pore volume.The ability of adsorption was highly related to the pore structure of coal,and coal particle size has a significant influence on coal adsorption/desorption characteristics,including adsorption capacity and desorption hysteresis for CH4 and CO2,i.e.,coal with a smaller particle size achieves higher adsorption capacity,while the sample with a larger particle size has lower adsorption capacity.Further,coal with larger particle size is also found to have relatively large desorption hysteresis.In addition,dynamic adsorption performances of the samples are carried out at 298 K and at pressures of 0.1 MPa and 0.5 MPa,respectively,and the results indicate that with the increase of particle size,the difference between CO2 and CH4adsorption capacities of the samples decreases.

Adsorption/desorption of toluene on a hypercrosslinked polymeric resin in a highly humid gas stream

In many sources of volatile organic compounds (VOCs), large amounts of water vapor come from the air and the reactors. The relative humidity (RH) of exhaust gas is normally >60% and is supersaturated. Maintaining the property of adsorbent on VOCs in a highly humid gas stream is a serious industrial problem. In this study, the adsorption/desorption behavior of toluene in a micro-mesoporous polymeric resin was investigated in a highly humid environment to explore the influence of abound water vapor on resin adsorption and regeneration. This resin could selectively adsorb toluene at an RH of 80%, and its adsorption property was unaffected by the presence of water vapor. In the case of humidity saturation, the resin displayed a high adsorption capacity at a moisture content of <30%. Therefore, the polymer resin is an excellent water-resistant adsorbent of VOCs. In the regenerative experiment, the resin maintained its original adsorption capability after four adsorption/ desorption cycles of toluene purging with nitrogen gas at 120℃. The resin exhibited excellent regeneration performance at high humidity.

Adsorption and desorption behaviors of ssDNA molecules on mica surface by surface forces apparatus

An approach for studying the adsorption and desorption behaviors of single-stranded DNA（ ssDNA） molecules on the mica surface by the surface forces apparatus（ SFA） is reported,which can be used to characterize the precise thickness,configuration and mechanical properties of ssDNA layers on the mica surface at a certain buffer solution. The formation of ss DNA layers is first studied by tuning the ssDNA concentrations, and the experimental results indicate that the ss DNA concentration of 100 ng / μL is ideal for forming a ssDNA monolayer structure on the mica surface, and the hardwall value measured to be 1.04 nm under this circumstance is regarded as the thickness of the ssDNA monolayer confined on mica. The desorption behavior of ssDNA molecules from the mica surface is further studied by observing and comparing different shapes of the force-distance curves under certain conditions. It is found that the desorption of ss DNA molecules from the mica surface occurs as the monovalent salts are added into the gap buffer. It is inferred that the competition effect between monovalent and divalent salts can induce the release of ssDNA from substrate.The results also reveal that 10 mmol / L monovalent salts（ Na~＋）is sufficient for the desorption of ssDNA from mica. This work provides an applicable method to study the binding mechanism of ss DNA molecules on inorganic substrates.

Oxygen adsorption/desorption behavior of YBaCo4O7+δ and its application to oxygen removal from nitrogen

A new medium-temperature (200-400 °C) adsorbent material for oxygen removal and air separation, YBaCo4O7+δ, was prepared by the solid-state reaction method. This new adsorbent could adsorb a large quantity of oxygen in the temperature range of 200-370 °C. Adsorbed oxygen could be released by raising temperature over 400 °C or by switching the atmosphere from oxygen to nitrogen. This oxygen adsorption and desorption process had good reproducibility. Taking advantage of this unique oxygen intake/release behavior, a nitrogen purification process was investigated. The results showed that YBaCo4O7+δ material was a promising candidate for the oxygen sorption process and could be used to produce high-purity nitrogen or to remove trace oxygen from other gases.

Adsorption onto Activated Carbon Fiber Cloth and Electrothermal Desorption of Volatile Organic Compound(VOCs):A Specific Review

A general research program, focusing on activated carbon fiber cloths （ACFC） and felt for environmental protection was performed. The objectives were multiple： （i） a better understanding of the adsorption mecha- nisms of these kinds of materials; （ii） the specification and optimization of new processes using these adsorbents; （iii） the modeling of the adsorption of organic pollutants using both the usual and original approaches; （iv） applications of ACFC in industrial processes. The general question was： how can activated carbon fiber cloths and felts be used in air treatment processes for the protection of environment. In order to provide an answer, different approaches were adopted. The materials （ACFC） were characterized in terms of macro structure and internal porosity. Specific studies were performed to get the air flow pattern through the fabrics. Head loss data were generated and modeled as a fi.mction of air velocity. The performances of ACF to remove volatile organic compounds （VOCs） were approached with the adsorption isotherms and breakthrough curves in various operating conditions. Regenera- tion by Joule effect shows a homogenous heating of adsorber modules with rolled or pleated layers. Examples of industrial developments were presented showing an interesting technology for the removal of VOCs, such as dichloromethane, benzene, isopropyl alcohol and toluene, alone or in a complex mixture.

Influences of Charcoal Amendment on Adsorption-Desorption of Isoproturon in Soils

In order to prevent pesticide leaching from soil, the effects of charcoal amendment on adsorption-desorption of isoproturon in soils were studied and the mechanisms in reducing the loss of isoproturon from soils were suggested. Adsorption-desorption of isoproturon in five different particle sizes of charcoals and three different soils were studied using batch equilibration technique. The results showed that the experimental data were well fitted by the Freundlich empirical equation. Charcoal had a great adsorption capacity for isoproturon, and the smaller the particle size of charcoal, the more the adsorption of isoproturon. The amendment with charcoal could greatly improve the adsorption of isoproturon in soils. The adsorption of isoproturon in soils increased with the rate of charcoal amended （r= 0.9568＊＊, P 〈 0.01）. Desorption of isoproturon from charcoals and soils showed significant hystersis which was shown by the higher adsorption slope （1/nsds） compared to the desorption slope （1/ndes. The hysteresis effects of charcoal on desorption of isoproturon were closely correlated with the content of charcoal in the soils, and the hysteresis index （H） increased with the rate of charcoal amended. Observation of environmental scanning electron microscopy （ESEM） exhibitted the fine pore structure and special surface characteristics of the tested charcoal. Analysis of Fourier transform infrared spectra （FTIR） of isoproturon adsorbed on charcoal suggested probable bonding interactions between isoproturon and charcoal. This research suggests that charcoal amendment may be an effective management practice for controlling pesticide desorption and leaching in soils.

Adsorption and Desorption Behavior of Tannic Acid in Aqueous Solution on Polyaniline Adsorbent

Tannic acid is generally considered as one of polyphenolic pollutants, which may cause severe threats to the environment. In this study, polyaniline adsorbent was synthesized by chemical oxidation to remove tannic acid in aqueous solutions. The adsorption amount of tannic acid varied greatly with pH of solution and strong adsorption was at pH 5.8-6.7. Coexisting cations, such as Na＋, K＋, and Ca2＋, can enhance the adsorption of tannic acid on poly- aniline, which may be contributed to the electrostatic interaction between tannic acid and polyaniline. The adsorp- tion process could be well described by Langmuir model and the maximum adsorption capacity was 117.65 rag.g〈 at 35℃and pH 6.0. The thermodynamic parameters calculated from the adsorption isotherms indicate that the ad- sorption of tannic acid is spontaneous and endothermic process. The polyaniline saturated with tannic acid can be desorbed in alkaline solution and regenerated adsorbent can be used repeatedly with high adsorption capacity, which implies that polyaniline adsorbents have a great potential in water purification for the removal of tannic acid.

Removal of Toluene by Adsorption/Desorption Using Ultra-stable Y Zeolite

The adsorption performance of toluene on ultra-stable Y zeolite (USY) was studied via dynamic adsorption. The eff ects of bed temperature, initial concentration, and feed fl ow rate on adsorption were investigated. The Yoon-Nelson model was used to fi t the toluene breakthrough curves. The length of mass transfer zone was calculated based on breakthrough curves. The Langmuir-Freundlich model fi t the adsorption isotherms of toluene on USY, which indicated that the surface of USY was heterogeneous. The adsorption isosteric heat calculated from adsorption isotherms ranged from 54.3 to 69.8 kJ/mol, indicating physical adsorption. The combined technique of temperature swing adsorption with vacuum swing adsorption (TVSA) exhibited excellent desorption performance, which was attributed to the low desorption activation energy. Under optimized TVSA conditions, the desorption rate of toluene reached 90.6% within 10 min. The long-term cyclic utilization results indicated that the adsorption capacity of USY was stable.

Mechanism model for shale gas transport considering diffusion, adsorption/desorption and Darcy flow

To improve the understanding of the transport mechanism in shale gas reservoirs and build a theoretical basic for further researches on productivity evaluation and efficient exploitation, various gas transport mechanisms within a shale gas reservoir exploited by a horizontal well were thoroughly investigated, which took diffusion, adsorption/desorption and Darcy flow into account. The characteristics of diffusion in nano-scale pores in matrix and desorption on the matrix surface were both considered in the improved differential equations for seepage flow. By integrating the Langmuir isotherm desorption items into the new total dimensionless compression coefficient in matrix, the transport function and seepage flow could be formalized, simplified and consistent with the conventional form of diffusion equation. Furthermore, by utilizing the Laplace change and Sethfest inversion changes, the calculated results were obtained and further discussions indicated that transfer mechanisms were influenced by diffusion, adsorption/desorption. The research shows that when the matrix permeability is closed to magnitude of 10^-9D, the matrix flow only occurs near the surfacial matrix; as to the actual production, the central matrix blocks are barely involved in the production; the closer to the surface of matrix, the lower the pressure is and the more obvious the diffusion effect is; the behavior of adsorption/desorption can increase the matrix flow rate significantly and slow down the pressure of horizontal well obviously.

Thermogravimetric Study on Oxygen Adsorption/Desorption Properties of Double Perovskite Structure Oxides REBaCo_2O_(5+δ)(RE= Pr,Gd,Y)

The oxygen adsorption/desorption properties of double perovskite structure oxides PrBaCo2O5＋δ,GdBaCo2O5＋δ,and YBaCo2O5＋δ were investigated by the thermogravimetry（TG）method in the temperature range of 400~900 ℃.The calculated oxygen adsorption/desorption surface reaction rate constants ka and kd of these double perovskite structure oxides were larger than the commonly used cubic perovskite oxides,such as Ba0.95Ca0.05Co0.8Fe0.2O3-δ and Ba0.5Sr0.5Co0.8Fe0.2O3-δ,whereas,the oxygen permeation flux was comparable to that of the latter,which was attributed to the smaller difference of oxygen vacancy in oxygen and nitrogen atmosphere（Δδ/Vmol）in these double perovskite structure oxides.The large oxygen adsorption/desorption rate constants of GdBaCo2O5＋δ and PrBaCo2O5＋δ made them nice catalyst coating materials,on other membrane surfaces,to improve the oxygen permeability.