UV-Based Advanced Oxidation Processes for Antibiotic Resistance Control: Efficiency, Influencing Factors, and Energy Consumption

Antibiotic resistant bacteria(ARB)with antibiotic resistance genes(ARGs)can reduce or eliminate the effectiveness of antibiotics and thus threaten human health.The United Nations Environment Programme considers antibiotic resistance the first of six emerging issues of concern.Advanced oxidation processes(AOPs)that combine ultraviolet(UV)irradiation and chemical oxidation(primarily chlorine,hydrogen peroxide,and persulfate)have attracted increasing interest as advanced water and wastewater treatment technologies.These integrated technologies have been reported to significantly elevate the efficiencies of ARB inactivation and ARG degradation compared with direct UV irradiation or chemical oxidation alone due to the generation of multiple reactive species.In this study,the performance and underlying mechanisms of UV/chlorine,UV/hydrogen peroxide,and UV/persulfate processes for controlling ARB and ARGs were reviewed based on recent studies.Factors affecting the process-specific efficiency in controlling ARB and ARGs were discussed,including biotic factors,oxidant dose,UV fluence,pH,and water matrix properties.In addition,the cost-effectiveness of the UV-based AOPs was evaluated using the concept of electrical energy per order.The UV/chlorine process exhibited a higher efficiency with lower energy consumption than other UV-based AOPs in the wastewater matrix,indicating its potential for ARB inactivation and ARG degradation in wastewater treatment.Further studies are required to address the trade-off between toxic byproduct formation and the energy efficiency of the UV/chlorine process in real wastewater to facilitate its optimization and application in the control of ARB and ARGs.

Mass Transfer-Promoted Fe^(2+)/Fe^(3+)Circulation Steered by 3D Flow-Through Co-Catalyst System Toward Sustainable Advanced Oxidation Processes

Realizing fast and continuous generation of reactive oxygen species(ROSs)via iron-based advanced oxidation processes(AOPs)is significant in the environmental and biological fields.However,current AOPs assisted by co-catalysts still suffer from the poor mass/electron transfer and non-durable promotion effect,giving rise to the sluggish Fe^(2+)/Fe^(3+)cycle and low dynamic concentration of Fe^(2+)for ROS production.Herein,we present a three-dimensional(3D)macroscale co-catalyst functionalized with molybdenum disulfide(MoS_(2))to achieve ultra-efficient Fe^(2+)regeneration(equilibrium Fe^(2+)ratio of 82.4%)and remarkable stability(more than 20 cycles)via a circulating flow-through process.Unlike the conventional batch-type reactor,experiments and computational fluid dynamics simulations demonstrate that the optimal utilization of the 3D active area under the flow-through mode,initiated by the convectionenhanced mass/charge transfer for Fe^(2+)reduction and then strengthened by MoS_(2)-induced flow rotation for sufficient reactant mixing,is crucial for oxidant activation and subsequent ROS generation.Strikingly,the flow-through co-catalytic system with superwetting capabilities can even tackle the intricate oily wastewater stabilized by different surfactants without the loss of pollutant degradation efficiency.Our findings highlight an innovative co-catalyst system design to expand the applicability of AOPs based technology,especially in large-scale complex wastewater treatment.

Application of advanced oxidation processes for removing salicylic acid from synthetic wastewaters

In this study,advanced oxidation processes(AOPs) such as anodic oxidation(AO),UV/H_2O_2 and Fenton processes(FP) were investigated for the degradation of salicylic acid(SA) in lab-scale experiments.Boron-doped diamond(BDD) film electrodes using Ta as substrates were employed for AO of SA.In the case of FP and UV/H_2O_2,most favorable experimental conditions were determined for each process and these were used for comparing with AO process.The study showed that the FP was the most effective process under aci...

Chemical oxygen demand reduction in coffee wastewater through chemical flocculation and advanced oxidation processes

The removal of the natural organic matter present in coffee processing wastewater through chemical coagulation-flocculation and advanced oxidation processes （AOP） had been studied. The effectiveness of the removal of natural organic matter using commercial flocculants and UV/H202, UV/O3 and UV/H2O2/O3 processes was determined under acidic conditions. For each of these processes, different operational conditions were explored to optimize the treatment efficiency of the coffee wastewater. Coffee wastewater is characterized by a high chemical oxygen demand （COD） and low total suspended solids. The outcomes of coffee wastewater treatment using coagulation-flocculation and photodegradation processes were assessed in terms of reduction of COD, color, and turbidity. It was found that a reduction in COD of 67% could be realized when the coffee wastewater was treated by chemical coagulation-flocculation with lime and coagulant T-1. When coffee wastewater was treated by coagulation-flocculation in combination with UV/H2O2, a COD reduction of 86% was achieved, although only after prolonged UV irradiation. Of the three advanced oxidation processes considered, UV/H2O2, UV/O3 and UV/H2O2/O3, we found that the treatment with UV/H2O2/O3 was the most effective, with an efficiency of color, turbidity and further COD removal of 87%, when applied to the flocculated coffee wastewater.

Effects of Advanced Oxidation Processes on the Decomposition Properties of Organic Compounds with Different Molecular Structures in Water

Studies to decompose persistent organic pollutants in wastewater from chemical factories by using Advanced Oxidation Processes (AOPs) have recently been performed. Oxidation reactions involving ozone and •OH radicals and cleavage caused by UV are the main decomposition reactions that occur in AOPs using ozone and UV. The mechanisms through which organic compounds are decomposed in AOPs are complicated and difficult to understand because various decomposition reactions occur simultaneously. The Total Organic Carbon (TOC) removal efficiencies achieved in several different AOPs were evaluated in this study. The TOC removal efficiencies were different for organic compounds with different chemical structures. The TOC was more effectively removed when aromatic compounds were treated using the O3-UV-TiO2 process than when using the other AOPs, and the TOC was removed more effectively by the O3-UV process than by the UV-TiO2 process. However, the TOC was removed more effectively when open-chain compounds were treated using the UV-TiO2 process than using the O3-UV process, and the UV-TiO2 and O3-UV-TiO2 processes resulted in similar TOC removal efficiencies. Therefore, it is necessary to use the O3-UV-TiO2 process to decompose aromatic compounds as quickly as possible. On the other hand, the UV-TiO2 process degraded the open-chain compounds most effectively, and the O3-UV-TiO2 process did not need to decompose open-chain compounds. Moreover, the TOC of aromatic compounds was removed more slowly than that of open-chain compounds. The TOC removal efficiency increased with decreasing the number of carbon atoms in the molecule. The TOC removal efficiencies increased in order of the organic compounds containing methyl groups, aldehyde groups and carboxyl groups. The removal of the TOC when organic compounds were treated using the O3-UV-TiO2 process followed pseudo-zero-order kinetics.

Review of advanced oxidation processes for treating hospital sewage to achieve decontamination and disinfection

Hospital sewage contains various harmful pharmaceutical contaminants(e.g.,antibiotics,anti-inflammatory agents,and painkillers)and pathogens(e.g.,bacteria,viruses,and parasites),whose direct discharge into the environment will induce diseases and pose a powerful threat to human health and safety,and environmental ecology.In recent years,advanced oxidation processes(AOPs),particularly photocatalysis,electrocatalysis,and ozone catalysis have been developed as widespread and effective techniques for hospital sewage treatments.However,there is a lack of systematic comparison and review of the prior studies on hospital sewage treatment using AOPs systems.This review elaborates on the mechanisms,removal efficiencies,and advantages/disadvantages of these AOPs systems for hospital wastewater decontamination and disinfection.Meanwhile,some novel and potential technologies such as photo-electrocatalysis,electro-peroxone,Fenton/Fenton-like,and piezoelectric catalysis are also included and summarized.Moreover,we further summarize and compare the capacity of these AOPs to treat the actual hospital wastewater under the impact of the water matrix and pH,and estimate the economic cost of these technologies for practical application.Finally,the future development directions of AOPs for hospital wastewater decontamination and disinfection have been prospected.Overall,this study provides a comparison and overview of these AOP systems in an attempt to raise extensive concerns about hospital wastewater decontamination and disinfection technologies and guide researchers to discover the future directions of technologies optimization,which would be a crucial step forward in the field of hospital sewage treatment.

Recent advances on decomplexation mechanisms of heavy metal complexes in persulfate-based advanced oxidation processes

In some industrial wastewater,heavy metals combine with organic complexing agents to form heavy metal complexes(HMCs).These HMCs can be difficult to decompose and remove through conventional techniques due to their higher stability than free heavy metal ions.In recent years,persulfate based advanced oxidation processes(PS-based AOPs)have been recognized as a viable technique for HMCs degradation.Nevertheless,a comprehensive and in-depth understanding of the relevant HMCs decomplexation mechanisms in PS-based AOPs is still lacking.This review delineates the current progress of HMCs decomplexation in PS-based AOPs.We discuss the distinctions between the two widely used oxidant types in PS-based AOPs techniques.Moreover,we summarize and highlight the decomplexation mechanisms based on electron and energy transfer,and degradation pathways of HMCs.We also emphasize the effects of environmental water constituents,namely p H,inorganic ions,and natural organic matter(NOM),on HMCs decomplexation.Ultimately,we identify the existing challenges and perspectives that will steer the direction of advancing PS-based AOPs to remove HMCs.

Manganese oxide and derivative-modified materials in advanced oxidation processes:A review of modification enhancement and activation mechanisms

Manganese oxides(MNO_(x)),as low-toxicity and high-abundance catalysts,have been demonstrated to hold great promise for application in advanced oxidation processes(AOPs).However,further application of this material is restricted due to its unsatisfactory oxidant activation efficiency.Fortunately,recently remarkable research on deep activation mechanisms and modification of MNO_(x)have been undertaken to improve its reactivity.Herein,modification enhancement mechanisms of MNO_(x)to efficiently degrade various organic contaminants were discussed and highlighted,including metal doping,coupling with other metal oxides,composite with carbonaceous material,and compounding with other support.The activation mechanisms of different MNO_(x)and derivative-modified material(such as doped MNO_(x),metal oxide-MNO_(x)hybrids,and MNO_(x)-carbonaceous material hybrids)were summarized in great details,which was specifically categorized into both radical and non-radical pathways.The effects of pH,inorganic ions,and natural organic matter on degradation reactions are also discussed.Finally,future research directions and perspectives are presented to provide a clear interpretation on the MNO_(x)initiated AOPs.

Recent advances in H_(2)O_(2)-based advanced oxidation processes for removal of antibiotics from wastewater

As important emerging contaminants, antibiotics have caused potential hazards to the ecological environment and human health due to their extensive production and consumption. Among various techniques for removing antibiotics from wastewater, H_(2)O_(2)-based advanced oxidation processes(AOPs) have received increasing attention due to their fast reaction rate and strong oxidation capability. Hence this review critically discusses:(i) Recent research progress of AOPs with the addition of H_(2)O_(2) for antibiotics removal through different methods of H_(2)O_(2) activation;(ii) recent advances in AOPs that can in-situ generate and activate H_(2)O_(2) for antibiotics removal;(iii) H_(2)O_(2)-based AOPs as a combination with other techniques for the degradation and mineralization of antibiotics in wastewater. Future perspectives about H_(2)O_(2)-based AOPs are also presented to grasp the future research trend in the area.

Comparison of UV-based advanced oxidation processes for the removal of different fractions of NOM from drinking water

This study examined the effectiveness for degradation of hydrophobic (HPO),transphilic(TPI) and hydrophilic (HPI) fractions of natural organic matter (NOM) during UV/H_(2)O_(2),UV/TiO_(2)and UV/K2S2O8(UV/PS) advanced oxidation processes (AOPs).The changing characteristics of NOM were evaluated by dissolved organic carbon (DOC),the specific UV absorbance (SUVA),trihalomethanes formation potential (THMFP),organic halogen adsorbable on activated carbon formation potential (AOXFP) and parallel factor analysis of excitation–emission matrices (PARAFAC-EEMs).In the three UV-based AOPs,HPI fraction with low molecular weight and aromaticity was more likely to degradate than HPO and TPI,and the removal efficiency of SUVA for HPO was much higher than TPI and HPI fraction.In terms of the specific THMFP of HPO,TPI and HPI,a reduction was achieved in the UV/H_(2)O_(2)process,and the higest removal rate even reached to 83%.UV/TiO_(2)and UV/PS processes can only decrease the specific THMFP of HPI.The specific AOXFP of HPO,TPI and HPI fractions were all able to be degraded by the three UV-based AOPs,and HPO content is more susceptible to decompose than TPI and HPI content.UV/H_(2)O_(2)was found to be the most effective treatment for the removal of THMFP and AOXFP under given conditions.C1 (microbial or marine derived humic-like substances),C_(2) (terrestrially derived humic-like substances)and C_(3) (tryptophan-like proteins) fluorescent components of HPO fraction were fairly labile across the UV-based AOPs treatment.C_(3) of each fraction of NOM was the most resistant to degrade upon the UV-based AOPs.Results from this study may provide the prediction about the consequence of UV-based AOPs for the degradation of different fractions of NOM with varied characteristics.

Studies on reaction mechanisms and distinct chemiluminescence from cyanoimino neonicotinoids triggered by peroxymonosulfate in advanced oxidation processes

In this study, we proposed a novel method to investigate the advanced oxidation process of neonicotinoids(NNIs) from the perspective of concomitant chemiluminescence(CL) reaction. It was found that in the presence of cobalt ions with cyanoimino NNIs, acetamiprid(ACE) and thiacloprid(THI), could promote peroxymonosulfate and Ru(bpy)_(3)^(2+) to produce strong CL, but no CL occurred with nitro-involved NNIs as alternatives. Experimental dada from UV absorption spectra and chemiluminescence spectra suggested that new cyclic compounds might be formed during the reaction. Based on the results of free radical scavenging experiment and mass spectra, a new degradation and reaction mechanism of cyanoiminocontaining NNIs was proposed. ACE or THI were first attacked by SO_(4)^(·-) to form benzyl radicals, which in turn reacted with the carbon atoms of cyano group through electrophilic addition reaction in the formation of intramolecular ring. Then a redox reaction between Ru(bpy)_(3)^(3+) and imino group immediately took place with CL emission(610 nm). The new mechanistic knowledge would be meaningful for other contaminants for their interactions with PMS.

Ce-based catalysts used in advanced oxidation processes for organic wastewater treatment: A review

Refractory organic pollutants in water threaten human health and environmental safety,and advanced oxidation processes (AOPs) are effective for the degradation of these pollutants.Catalysts play vital role in AOPs,and Ce-based catalysts have exhibited excellent performance.Recently,the development and application of Ce-based catalysts in various AOPs have been reported.Our study conducts the first review in this rapid growing field.This paper clarifies the variety and properties of Ce-based catalysts.Their applications in different AOP systems (catalytic ozonation,photodegradation,Fenton-like reactions,sulfate radicalbased AOPs,and catalytic sonochemistry) are discussed.Different Ce-based catalysts suit different reaction systems and produce different active radicals.Finally,future research directions of Ce-based catalysts in AOP systems are suggested.

Decontamination of heavy metal complexes by advanced oxidation processes:A review

Heavy metal complexes with high mobility are widely distributed in wastewater from modern industries,which are mo re stable and refracto ry than free heavy metal ions.Their re movals from wastewater draw increasing attentions and various technologies have been developed,among which advanced oxidation processes(AOPs)are more effectively and promising.Progresses on five representative types of AOPs,including Fenton(like)oxidation,electrochemical oxidation,photocatalytic oxidation,ozonation and discharge plasma oxidation for heavy metal complexe s degradation are summarized in this review.Their rationales,advantages,applications,challenges and prospects are introduced independently.Combinations among these AOPs,such as electrochemical Fenton oxidation and photoelectrocatalytic oxidation,are also comprehensively highlighted.Future efforts should be made to reduce acid requirement and scale up for practical applications of AOPs for heavy metal complex degradation efficiently and cost-effectively.

Recent advances in persulfate-based advanced oxidation processes for organic wastewater treatment

In recent years,with the emergence of new pollutants,the effective treatment of wastewater has become very important.Persulfate-based advanced oxidation processes have been successfully applied to the treatment of wastewater,such as wastewater containing antibiotics,pharmaceuticals and personal care products,dyes,endocrine-disrupting chemicals,chlorinated organic pollutants,and phenolics,for the degradation of refractory organic contaminants.This paper summarizes the production of sulfate radicals,which can be generated by the activation of persulfate via conventional and emerging approaches.The existing problems of persulfate-based advanced oxidation processes were analyzed in detail,including residual sulfates,coexisting factors(coexisting inorganic anions and natural organic matter),and energy consumption.This paper proposes corresponding possible solutions to the problems mentioned above,and this paper could provide a reference for the application of persulfate-based advanced oxidation processes in actual wastewater treatment.

Degradation of 4-nitrophenol by electrocatalysis and advanced oxidation processes using Co3O4@C anode coupled with simultaneous CO2 reduction via SnO2/CC cathode

Herein,we prepa red novel three-dimensional(3D)gear-s haped Co3O4@C(Co3O4 modified by amorphous carbon)and sheet-like SnO2/CC(SnO2 grow on the carbon cloth)as anode and cathode to achieve efficient removal of 4-nitrophenol(4-NP)in the presence of peroxymonosulfate(PMS)and simultaneous electrocatalytic reduction of CO2,respectively.In this process,4-NP was mineralized into CO2 by the Co3O4@C,and the generated CO2 was reduced into HCOOH by the sheet-like SnO2/CC cathode.Compared with the pure Co0.5(Co3O4 was prepared using 0.5 g urea)with PMS(30 mg,0.5 g/L),the degradation efficiency of 4-NP(60 mL,10 mg/L)increased from 74.5%-85.1%in 60 min using the Co0.5 modified by amorphous carbon(Co0.5@C).Furthermore,when the voltage of 1.0 V was added in the anodic system of Co0.5@C with PMS(30 mg,0.5 g/L),the degradation efficiency of 4-NP increased from 85.1%-99.1%when Pt was used as cathode.In the experiments of 4-NP degradation coupled with simultaneous electrocatalytic CO2 reduction,the degradation efficiency of 4-NP was 99.0%in the anodic system of Co0.5@C with addition of PMS(30 mg,0.5 g/L),while the Faraday efficiency(FE)of HCOOH was 24.1%at voltage of-1.3 V using the SnO2/CC as cathode.The results showed that the anode of Co3O4 modified by amorphous carbon can markedly improve the degradation efficiency of 4-NP,while the cathode of SnO2/CC can greatly improve the FE and selectivity of CO2 reduction to HCOOH and the stability of cathode.Finally,the promotion mechanism was proposed to explain the degradation of organic pollutants and reduction of CO2 into HCOOH in the process of electrocatalysis coupled with advanced oxidation processes(AOPs)and simultaneous CO2 reduction.

Critical review of perovskites-based advanced oxidation processes for wastewater treatment: Operational parameters, reaction mechanisms,and prospects

In the field of advanced oxidation processes(AOPs) of wastewater, many materials can be used as heterogeneous catalysts. The role of these catalysts is to activate oxidants and generate reactive oxygen species(ROS) to decompose refractory pollutants. Perovskite oxide, an emerging catalyst in the field of AOPs, has been extensively studied in wastewater treatment. Nevertheless, the application of perovskite in AOP systems still faces some problems, such as leaching of metal ions, a small surface area, a low number of active sites, etc. Herein, this critical review comparatively examines the activation mechanisms of peroxymonosulfate, hydrogen peroxide, and peroxydisulfate. Furthermore, the formation pathways of oxidizing species based on recent advances in experimental and theoretical studies were evaluated. In addition, the impacts of water parameters and constituents such as initial p H, oxidant concentration, catalyst dosage,natural organic matter, halide, phosphate, and carbonate were discussed. Finally, a critical discussion and prospects of mechanism exploration and possible materials development are proposed to confront the existing challenges in the application of perovskite oxides in AOPs.

Identification and ecotoxicity assessment of intermediates generated during the degradation of clofibric acid by advanced oxidation processes

The aim of this study was to identify the intermediates in clofibric acid degradation under various advanced oxidation processes, namely ultraviolet （UV）, UV/H2O2, vacuum ultraviolet （VUV）, VUV/H2O2, and solar/TiO2 processes, as well as to assess the toxicity of these intermediates. Eleven intermediates have been detected by gas chromatography-mass spectrometer, most of which were reported for the first time to our best knowledge. Combining the evolution of the dissolved organic carbon, CF and specific ultraviolet absorption at 254 nm, it could be deduced that cleavage of aromatic ring followed by dechlorination was the mechanism in solar/ TiO2 process, while dechlorination happened first and accumulation of aromatic intermediates occurred in the other processes. Different transformation pathways were proposed for UV-, VUV-assisted and solar/TiO2 processes, respectively. The acute toxicity was evaluated by means of Photobacterium phosphoreurn T3 spp. bioassay. It was believed that aromatic intermediates increased the toxicity and the ring-opening pathway in solar/TiO2 process could relieve the toxicity.

Effect of the chloride ion on advanced oxidation processes catalyzed by Fe-based metallic glass for wastewater treatment

Fe-based metallic glasses (Fe–MGs) are potential candidate catalysts for advanced oxidation processes(AOPs) for recalcitrant organic pollutant degradation. However, industrial wastewater and natural contaminated sites usually contain abundant inorganic ions, like the chloride ion (Cl−), which significantly affectAOPs, but their influence on MG-activated AOPs still remains unclear. Through the study of three commonly used oxidants, hydrogen peroxide (H_(2)O_(2)), peroxydisulfate (PDS), and peroxymonosulfate (PMS), theeffect of Cl− on the FeSiB-catalyzed process of degradation of the typical azo dye Orange Ⅱ was investigated. Evidence indicates that the addition of Cl− resulted in the monotonous inhibition of the degradation process when the H_(2)O_(2)/FeSiB and PDS/FeSiB systems were employed, but promoted effect wasdetected with the PMS/FeSiB system, which is different from the previously observed dual effect of Cl−.It is closely relative with FeSiB induced unique variety of degradation pathways, including radicals, nonradicals (^(1)O_(2)), and direct reduction degradation. Moreover, the presence of Cl− significantly affected thesystems’ absorbable organic halogen content and the amount of Fe leached into the solution. The resultsof this work will provide essential references for Fe-based MG used as AOP catalysts in field applicationsand the development of advanced MGs with excellent adaptability to complex environments.

Stable and efficient metal-biochar supported catalyst:degradation of model pollutants through sulfate radical-based advanced oxidation processes

This study focuses on the synthesis of metal-based biochar catalysts and their catalytic activation of peroxymonosulfate(PMS,HSO5−)for the degradation of three different wastewater model pollutants employing advanced oxidation processes(AOP).Iron,copper,and two different cobalt-based catalysts were prepared and evaluated.The catalysts were supported on a biochar obtained from the pyrolysis of woody pruning wastes.They were characterized by C,H,and N elemental analysis,X-Ray diffraction(XRD),Fourier-transform infrared spectroscopy(FTIR),and scanning electron microscope(SEM).The metal content in each catalyst was determined by means of atomic absorption spectroscopy(AAS).The degradation reac-tions of benzoic acid(BA),catechol(C),and cinnamic acid(CA)were carried out in a lab scale batch glass reactor and were followed by UV-Visible spectroscopy(UV-Vis).A colorimetric technique was employed to verify the presence of oxidant during the reaction progress.The catalyst/oxidant optimal ratio was determined for the cobalt catalysts.The mineralization degree of the pollutants after the degradations was verified by means of total organic carbon(TOC)content in the residual liquids.After 4 h of reaction,the maximum mineralization was reached when C was treated with a cobalt-based catalyst(>80%),and its stability was evaluated through successive cycles of use.

O_(3) based advanced oxidation for ibuprofen degradation

The degradation of the anti-inflammatory ibuprofen(IBP)was evaluated by several advanced oxidation processes.IBP was treated by single ozonation and oxidation with hydrogen peroxide(H_(2)O_(2)),as well as a combination of these treatments.In order to improve the efficiency,the presence of catalysts such as original carbon nanotubes,labelled as CNT,and iron oxide supported on carbon nanotubes,named as Fe/CNT sample,was considered.The evolution of IBP degradation,mineralization and toxicity of the solutions was assessed.The formation of intermediates was also monitored.In the non-catalytic processes,IBP was faster removed by single ozonation,whereas no significant total organic carbon(TOC)removal was achieved.Oxidation with H_(2)O_(2) did not present satisfactory results.When ozone and H_(2)O_(2) were combined,a higher mineralization was attained(70%after 180 min of reaction).On the other hand,in the catalytic processes,this combined process allowed the fastest IBP degradation.In terms of mineralization degree,the presence of Fe/CNT increases the removal rate in the first hour of reaction,achieving a TOC removal of 85%.Four compounds were detected as by-products.All treated solutions presented lower toxicity than the initial solution,suggesting that the released intermediates during applied processes are less toxic.