Oxidation Resistance of Form-stable Hightemperature Phase Change Thermal Energy Storage Materials Doped by Impregnated Graphite

We adopted the solution impregnation route with aluminum dihydrogen phosphate solution as liquid medium for effective surface modification on graphite substrate.The mass ratio of graphite to Al(H_(2)PO_(4))_(3) changed from 0.5:1 to 4:1,and the impregnation time changed from 1 to 7 h.The typical composite phase change thermal storage materials doped with the as-treated graphite were fabricated using form-stable technique.To investigate the oxidation and anti-oxidation behavior of the impregnated graphite at high temperatures,the samples were put into a muffle furnace for a cyclic heat test.Based on SEM,EDS,DSC techniques,analyses on the impregnated technique suggested an optimized processing conditions of a 3 h impregnation time with the ratio of graphite:Al(H_(2)PO_(4))_(3) as 1:3 for graphite impregnation treatment.Further investigations on high-temperature phase change heat storage materials doped by the treated graphite suggested excellent oxidation resistance and thermal cycling performance.

Phase-engineering modulation of Mn-based oxide cathode for constructing super-stable sodium storage

The Mn-based oxide cathode with enriched crystal phase structure and component diversity can provide the excellent chemistry structure for Na-ion batteries.Nevertheless,the broad application prospect is obstructed by the sluggish Na^(+)kinetics and the phase transitions upon cycling.Herein,we establish the thermodynamically stable phase diagram of various Mn-based oxide composites precisely controlled by sodium content tailoring strategy coupling with co-doping and solid-state reaction.The chemical environment of the P2/P'3 and P2/P3 biphasic composites indicate that the charge compensation mechanism stems from the cooperative contribution of anions and cations.Benefiting from the no phase transition to scavenge the structure strain,P2/P'3 electrode can deliver long cycling stability(capacity retention of 73.8%after 1000 cycles at 10 C)and outstanding rate properties(the discharge capacity of 84.08 mA h g^(-1)at 20 C)than P2/P3 electrode.Furthermore,the DFT calculation demonstrates that the introducing novel P'3 phase can significantly regulate the Na^(+)reaction dynamics and modify the local electron configuration of Mn.The effective phase engineering can provide a reference for designing other high-performance electrode materials for Na-ion batteries.

Recent advances in graphene-based phase change composites for thermal energy storage and management

Energy storage and conservation are receiving increased attention due to rising global energy demands.Therefore,the development of energy storage materials is crucial.Thermal energy storage(TES)systems based on phase change materials(PCMs)have increased in prominence over the past two decades,not only because of their outstanding heat storage capacities but also their superior thermal energy regulation capability.However,issues such as leakage and low thermal conductivity limit their applicability in a variety of settings.Carbon-based materials such as graphene and its derivatives can be utilized to surmount these obstacles.This study examines the recent advancements in graphene-based phase change composites(PCCs),where graphene-based nanostructures such as graphene,graphene oxide(GO),functionalized graphene/GO,and graphene aerogel(GA)are incorporated into PCMs to substantially enhance their shape stability and thermal conductivity that could be translated to better storage capacity,durability,and temperature response,thus boosting their attractiveness for TES systems.In addition,the applications of these graphene-based PCCs in various TES disciplines,such as energy conservation in buildings,solar utilization,and battery thermal management,are discussed and summarized.

Self‑Assembly of Binderless MXene Aerogel for Multiple‑Scenario and Responsive Phase Change Composites with Ultrahigh Thermal Energy Storage Density and Exceptional Electromagnetic Interference Shielding

The severe dependence of traditional phase change materials(PCMs)on the temperature-response and lattice deficiencies in versatility cannot satisfy demand for using such materials in complex application scenarios.Here,we introduced metal ions to induce the self-assembly of MXene nanosheets and achieve their ordered arrangement by combining suction filtration and rapid freezing.Subsequently,a series of MXene/K^(+)/paraffin wax(PW)phase change composites(PCCs)were obtained via vacuum impregnation in molten PW.The prepared MXene-based PCCs showed versatile applications from macroscale technologies,successfully transforming solar,electric,and magnetic energy into thermal energy stored as latent heat in the PCCs.Moreover,due to the absence of binder in the MXene-based aerogel,MK3@PW exhibits a prime solar-thermal conversion efficiency(98.4%).Notably,MK3@PW can further convert the collected heat energy into electric energy through thermoelectric equipment and realize favorable solar-thermal-electric conversion(producing 206 mV of voltage with light radiation intensity of 200 mw cm^(−2)).An excellent Joule heat performance(reaching 105℃with an input voltage of 2.5 V)and responsive magnetic-thermal conversion behavior(a charging time of 11.8 s can achieve a thermal insulation effect of 285 s)for contactless thermotherapy were also demonstrated by the MK3@PW.Specifically,as a result of the ordered arrangement of MXene nanosheet self-assembly induced by potassium ions,MK3@PW PCC exhibits a higher electromagnetic shielding efficiency value(57.7 dB)than pure MXene aerogel/PW PCC(29.8 dB)with the same MXene mass.This work presents an opportunity for the multi-scene response and practical application of PCMs that satisfy demand of next-generation multifunctional PCCs.

Robust adaptive leaderless consensus of unknown non-minimum phase linear multi-agent systems subject to disturbances and/or unmodeled dynamics

This article investigates the problem of robust adaptive leaderless consensus for heterogeneous uncertain nonminimumphase linear multi-agent systems over directed communication graphs. Each agent is assumed tobe of unknown nominal dynamics and also subject to external disturbances and/or unmodeled dynamics. Anovel distributed robust adaptive control strategy is proposed. It is shown that the robust adaptive leaderlessconsensus problem is solved with the proposed control strategy under some sufficient conditions. Two examplesare provided to demonstrate the efficacy of the proposed control strategy.

Heat transfer enhanced inorganic phase change material compositing carbon nanotubes for battery thermal management and thermal runaway propagation mitigation

Developing technologies that can be applied simultaneously in battery thermal management(BTM)and thermal runaway(TR)mitigation is significant to improving the safety of lithium-ion battery systems.Inorganic phase change material(PCM)with nonflammability has the potential to achieve this dual function.This study proposed an encapsulated inorganic phase change material(EPCM)with a heat transfer enhancement for battery systems,where Na_(2)HPO_(4)·12H_(2)O was used as the core PCM encapsulated by silica and the additive of carbon nanotube(CNT)was applied to enhance the thermal conductivity.The microstructure and thermal properties of the EPCM/CNT were analyzed by a series of characterization tests.Two different incorporating methods of CNT were compared and the proper CNT adding amount was also studied.After preparation,the battery thermal management performance and TR propagation mitigation effects of EPCM/CNT were further investigated on the battery modules.The experimental results of thermal management tests showed that EPCM/CNT not only slowed down the temperature rising of the module but also improved the temperature uniformity during normal operation.The peak battery temperature decreased from 76℃to 61.2℃at 2 C discharge rate and the temperature difference was controlled below 3℃.Moreover,the results of TR propagation tests demonstrated that nonflammable EPCM/CNT with good heat absorption could work as a TR barrier,which exhibited effective mitigation on TR and TR propagation.The trigger time of three cells was successfully delayed by 129,474 and 551 s,respectively and the propagation intervals were greatly extended as well.

Analysis of χ Phase Precipitation in Aged 2205 Duplex Stainless Steel

Analysis ofZ phase precipitation in 2205 duplex stainless steel aged at 700 and 750 ~C has been investigated systematically. The experimental results showed that X phase forms prior to the precipitation of δ phase and disappears once tr phase starts to precipitate. This phenomenon indicates that a phase nucleated and consumed the Z phase. The δ phase nucleated mairdy at ferrite/austenite interface and grew inwards into the ferrite phase. The morphology of a phase reveals a coral-like structure at the temperature of 700 ℃ for 120 min followed by quenching in water. The decomposition of ferrite occurs via the following eutectoid reaction： F---＊o＇＋y2. The selected area diffraction pattern of zone axes is[3 1 3-][3 1 3], indicating a characteristic orientation relationship between X phase and δ-ferrite.

Phase Transformation and Thermal Stability of Aged Ti-Ni-Hf High Temperature Shape Memory Alloys

The use of Ni-rich TiNiHf alloys as high temperature shape memory alloys （SMAs） through aging has been presented. For Ni-rich Ti80-xNixHf20 alloys, their phase transformation temperatures are averagely increased more than 100 K by aging at 823 K for 2 h. Especially for the alloys with Ni-content of 50.4 at. pct and 50.6 at. pct, their martensitic transformation start temperatures （Ms） are more than 473 K after aging. TEM observation confirmed that some fine particles precipitate from the matrix during aging. The aged Ni-rich TiNiHf SMAs show the better thermal stability of phase transformation temperatures than the solutiontreated TiNiHf alloys. The fine particles precipitated during aging should be responsible for the increase of phase transformation temperatures and its high stability.

Characteristics of different aged plantations of Ormosia hosiei with regards to soil microbial biomass and enzymatic activities

Stand age is an important indicator of tree growth and life cycle,and has implications for ecological and biological processes.This study examined changes in soil microbial biomass(SMB)as well as enzyme activities of different aged plantations and revealed their relationship to soil properties.SMB,microbial biomass carbon(MBC),microbial biomass nitrogen(MBN),microbial biomass phos-phorous(MBP)and enzyme activities(β-1,4-glucosidase(β-G),β-1,4-xylosidase(β-X),cellobiohydrolase(CBH),leucine aminopeptidase(LAP),β-1,4-n-acetylglucosamine(NAG)and acid phosphatase(ACP))were measured in Oro-mosia hosiei plantations of different ages.The soil qual-ity index(SQI)model assessed soil quality.SMB contents significantly decreased in young(7-year-old)and mature plantations(45-year-old)compared to middle-aged(20-year-old)plantations.Activity of soilβ-G,β-X,CBH and NAG in the 20-year-old plantations was markedly higher than in the other plantations except forβ-G,CBH and NAG in the 45-year-old plantations.Soil organic carbon(SOC),total potassium(TK),total porosity,dissolved organic carbon,nitrate nitrogen(NO_(3)--N)and non-capillary porosity were key factors affecting SMB,while soil bulk density,pH,SOC,NO_(3)--N,TK and forest litter(FL)were the main factors affecting soil enzyme activities.SQI decreased in the order:middle-aged>mature>young.The efficiency of soil organic matter conversion,the effect of nitrogen min-eralization and fixation by microorganisms,and the better efficiency of phosphorus utilization in mid-age plantations,which improves soil physical properties,better facilitates tree growth,and further improves the buffering of the soil against acidity and alkalinity.FL quality was the only soil biological factor affecting soil enzyme activity.Our findings demonstrate that different aged plantations affect soil micro-bial biomass,enzyme activity,and soil quality.

Characteristics of the HIV/AIDS Epidemic among People Aged≥50 Years in China during 2018–2021

Objective This study aimed to determine the current epidemiological status of PLWHA aged≥50 years in China from 2018 to 2021.It also aimed to recommend targeted interventions for the prevention and treatment of HIV/AIDS in elderly patients.Methods Data on newly reported cases of PLWHA,aged≥50 years in China from 2018 to 2021,were collected using the CRIMS.Trend tests and spatial analyses were also conducted.Results Between 2018 and 2021,237,724 HIV/AIDS cases were reported among patients aged≥50 years in China.The main transmission route was heterosexual transmission(91.24%).Commercial heterosexual transmission(CHC)was the primary mode of transmission among males,while non-marital non-CHC([NMNCHC];60.59%)was the prevalent route in women.The proportion of patients with CHC decreased over time(Z=67.716,P<0.01),while that of patients with NMNCHC increased(Z=153.05,P<0.01).The sex ratio varied among the different modes of infection,and it peaked at 17.65 for CHC.The spatial analysis indicated spatial clustering,and the high-high clustering areas were mainly distributed in the southwestern and central-southern provinces.Conclusion In China,PLWHA,aged≥50 years,were predominantly infected through heterosexual transmission.The primary modes of infection were CHC and NMNCHC.There were variations in the sex ratio among different age groups,infected through various sexual behaviors.HIV/AIDS cases exhibited spatial clustering.Based on these results,the expansion of HIV testing,treatment,and integrated behavioral interventions in high-risk populations is recommended to enhance disease detection in key regions.

Evaluation of Compatibilizers for Improving Compatibility between Waste Vegetable Oil and Aged Asphalt

Modifying agents 2,2-Bis(4-glycidyloxyphenyl)propane(2BPE)and dibutyl phthalate(DBP)were selected to enhance the compatibility.By using molecular simulation software(Materials Studio,MS),nine systems were constructed,including molecular models of aged asphalt and WVO monomers with 2BPE and/or DBP.The solubility parameters,Flory-Huggins parameters,and interaction energies of these systems were calculated to determine the impact of 2BPE and DBP on the compatibility of WVO and aged asphalt.Results showed that the addition of 2BPE and DBP reduced the difference in the solubility parameters between WVO and aged asphalt,thus improving the compatibility between WVO and aged asphalt.Additionally,using a combination of 2BPE and DBP in both aged asphalt and rejuvenator was found to be more effective than using either 2BPE or DBP alone.Finally,it was determined that evaluating the compatibility of WVO and aged asphalt using Van der Waals potential and non-bonding energy as evaluation indicators was more accurate than using electrostatic potential energy.

Phase-field modeling for anisotropic ductile damage of magnesium alloys at finite deformations

The damage anisotropy of an extruded ZK60 Mg alloy is characterized using tensile tests and scanning electronic microscopy.The accumulation of anisotropic deformations leads to the great differences of the dimple evolution and strains at fracture along different loading directions.To introduce the anisotropic deformation information into the damage constitutive relationship,a thermodynamically consistent phase-field model of ductile damage fully coupled with elastoplastic finite deformations is developed in this study.Using the user-defined constitutive relationship and displacement-temperature coupling element,the finite element simulations are conducted.The results show that:(1)ZK60 Mg alloys presents clear R-value difference in 0°,45°,and 90°tests of intact specimens.The 45°test possesses the greatest R-value(1.50)and the greatest strain at fracture,however,the R-value for 0°is less than 1,indicating the thinning is preferential.(2)The higher ultimate stress leads to a larger average dimension of the dimples,whereas the higher density correlates with a larger elongation ratio at the fracture.The disappearance of the stress-bearing area indicates that the phase-field assumption on stress degradation is completely compatible with the dimple analysis on fractography.(3)The simulation results of the stress-strain relationships and damage paths correlate well with the experimental ductile damage of magnesium alloys at 200◦C.Slight errors are basically attributed to the modeling parameters and finite element iteration algorithm.The proposed model presents fine applicability and reliability for the predictions of plastic deformations,ductile damage,and fracture of anisotropic Mg alloys.

Laboratory Evaluation of Performance Recovery of Aged SBS-modified Asphalt Using Regenerants with Different Base Oil Components

In this study,the regenerative effects of different regenerants on aged SBS-modified asphalt from different perspectives were investigated,including their conventional properties,viscoelastic behavior,creep-related properties,and micromorphology.Base oils composed of different proportions of aromatic and saturated hydrocarbons as well as the styrene-butadiene-styrene(SBS)restorer were used to prepare the regenerants.The results showed that the components of the base oil of the regenerant played a crucial role in determining the characteristics and performance of the recycled SBSmodified asphalt.Regenerants containing a high proportion of aromatics dissolved the hard segment in the SBS restorer,thereby delaying the effect of a reduction in the regenerants on the performance of the aged asphalts at a high temperature.Regenerants containing a high proportion of saturates dissolved the soft segment in the SBS restorer to enhance the lowtemperature performance of the recycled asphalts.In addition,the stress sensitivity of the recycled asphalts increased with the fraction of aromatics in the regenerant.As the aromatic content of the base oil components of the regenerants increased and their saturate content decreased,the state of dispersion of the SBS phase in the recycled SBS-modified asphalts improved.The optimal content of aromatics in the base oil of the regenerants should be set in the range of 33%to 47%to ensure the adequate performance of the recycled asphalts and a high efficiency of the SBS restorer.

Multifunctional phase change film with high recyclability, adjustable thermal responsiveness, and intrinsic self-healing ability for thermal energy storage

Phase change materials(PCMs) present promising potential for guaranteeing safety in thermal management systems.However,most reported PCMs have a single application in energy storage for thermal management systems,which does not meet the growing demand for multi-functional materials.In this paper,the flexible material and hydrogen-bonding function are innovatively combined to design and prepare a novel multi-functional flexible phase change film(PPL).The 0.2PPL-2 film exhibits solid-solid phase change behavior with energy storage density of 131.8 J/g at the transition temperature of42.1℃,thermal cycling stability(500 cycles),wide-temperature range flexibility(0-60℃) and selfhealing property.Notably,the PPL film can be recycled up to 98.5% by intrinsic remodeling.Moreover,the PPL film can be tailored to the desired colors and configurations and can be cleverly assembled on several thermal management systems at ambient temperature through its flexibility combined with shape-memory properties.More interestingly,the transmittance of PPL will be altered when the ambient temperature changes(60℃),conveying a clear thermal signal.Finally,the thermal energy storage performance of the PPL film is successfully tested by human thermotherapy and electronic device temperature control experiments.The proposed functional integration strategy provides innovative ideas to design PCMs for multifunctionality,and makes significant contributions in green chemistry,highefficiency thermal management,and energy sustainability.

Modification of BCC phase and the enhanced reversible hydrogen storage properties of Ti-V-Fe-Mn alloys with varied V/Fe ratios

Ti-V-based alloys are proved of huge potential in storing hydrogen,but the incomplete reversible hydrogen storage capacity caused by overstability of V hydride has limited the large-scale application.In this study,Ti_(32)V_(40+x)Fe_(23-x)Mn_(5)(x=0,4,8,12,at.%)alloys were designed,and the effects of V/Fe ratio on phase constitution and hydrogen storage properties were investigated.The main phase of the alloys is body-centered cubic(BCC)phase,and the lattice constants of the BCC phase decrease with the decrease of V/Fe ratio.Moreover,C14 Laves phase exists in alloys with a Fe content of 19at.%to 23at.%.For hydrogenation,the C14 Laves phase can accelerate the hydrogen absorption rate,but the hydrogen absorption capacity is reduced.With the decrease of V/Fe ratio,the hydride gradually destabilizes.Owing to its large lattice constant and high hydrogen absorption phase content,the Ti_(32)V_(52)Fe_(11)Mn_(5)alloy shows the most enhanced hydrogen storage properties with hydrogenation and dehydrogenation capacities of 3.588wt.%at 298 K and 1.688wt.%at 343 K,respectively.The hydrogen absorption capacity of this alloy can be reserved to 3.574wt.%after 20 cycles of hydrogen absorption and desorption.

Preparation of coconut oil/aluminum nitride/expanded graphite composite phase change materials with high thermal conductivity and stable shape for thermal energy storage

Phase change energy storage is one of the solutions to effectively deal with the problemof intermittency and spatial and temporal mismatch between supply and demand of new energy sources(solar,wind,etc.).However,phase change materials(PCMs)suffer fromlowthermal conductivity,which greatly affects energy storage and release efficiency.In this study,a novel shape-stable phase change material(SSPCM)was prepared by mixing coconut oil(CO)as a PCM with aluminum nitride(AlN)thermally conductive reinforcing particles and vacuum impregnated into expanded graphite(EG).The results showed that the thermal conductivity of the prepared SSPCM reached 2.985W·m^(-1)·K^(-1),which was 1765%higher than that of pure CO.The latent heat of SSPCM was 83.67 J·g^(-1),which was 99%of the theoretical value.Furthermore,SSPCM showed excellent thermal stability and thermal cycle reliability.The proposed SSPCMs have the advantages of being renewable and simple preparation methods,which have great potential for application.

Scattered Co-anchored MoS_(2)synergistically boosting photothermal capture and storage of phase change materials

Pristine phase change materials(PCMs)suffer from inherent deficiencies of poor solar absorption and photothermal conversion.Herein,we proposed a strategy of co-incorporation of zero-dimensional(OD)metal nanoparticles and two-dimensional(2D)photothermal materials in PCMs for efficient capture and conversion of solar energy into thermal energy.Highly scattered Co-anchored MoS_(2)nanoflower cluster serving as photon and phonon triggers was prepared by in-situ hydrothermal growth of ZIF67 polyhedron on 2D MoS_(2)and subsequent high-temperature carbonization.After encapsulating thermal storage unit(paraffin wax),the obtained composite PCMs integrated high-performance photothermal conversion and thermal energy storage capability.Benefiting from the synergistic enhancement of OD Co nanoparticles with localized surface plasmon resonance effect,carbon layer with the conjugation effect and 2D MoS_(2)with strong solar absorption,composite PCMs exhibited a high photothermal conversion efficiency of 95.19%,Additionally,the resulting composite PCMs also demonstrated long-term thermal sto rage stability and durable structu ral stability after 300 thermal cycles.The proposed collabo rative co-incorporation strategy provides some innovative references for developing next-generation photothermal PCMs in solar energy utilization.

Insights into Ru Crystal Phase Regulated by Reducing Agent for the Catalytic Activity of Ammonia Synthesis

Ru nanoparticles with fcc and hcp crystal phases were obtained by chemical reduction method using different precursors and reducing agents,and their catalytic properties in ammonia synthesis were compared.The catalytic reaction rate(666.4μmol·h^(−1)·g^(−1))of fcc Ru catalyst is higher than that of hcp Ru(378.9μmol·h^(−1)·g^(−1))at the reaction temperature(400℃)and pressure(1 MPa).The results indicate that the exposed crystal faces have a certain impact on the catalytic activity.The dissociation ability to N_(2) of fcc Ru exposed(111)and(200)is better than that of hcp Ru exposed(100).When the ruthenium catalyst was loaded on rod-like CeO_(2) support,the ammonia synthesis activity was further improved.The ammonia synthesis activity of fcc Ru/CeO_(2) is 1.4 times higher than that of hcp Ru/CeO_(2) under the test conditions.

Microbiomics and metabolomics insights into the microbial regulation on the formation of flavor components in the traditional fermentation process of Chinese Hongqu aged vinegar

This study aimed to investigate microbial succession and metabolic dynamics during the traditional fermentation of Hongqu aged vinegar,and explore the core functional microbes closely related to the formation of flavor components.Microbiome analysis demonstrated that Lactobacillus,Acetobacter,Bacillus,Enterobacter,Lactococcus,Leuconostoc and Weissella were the predominant bacterial genera,while Aspergillus piperis,Aspergillus oryzae,Monascus purpureus,Candida athensensis,C.xylopsoci,Penicillium ochrosalmoneum and Simplicillium aogashimaense were the predominant fungal species.Correlation analysis revealed that Acetobacter was positively correlated with the production of tetramethylpyrazine,acetoin and acetic acid,Lactococcus showed positive correlation with the production of 2-nonanone,2-heptanone,ethyl caprylate,ethyl caprate,1-hexanol,1-octanol and 1-octen-3-ol,C.xylopsoci and C.rugosa were positively associated with the production of diethyl malonate,2,3-butanediyl diacetate,acetoin,benzaldehyde and tetramethylpyrazine.Correspondingly,non-volatile metabolites were also detected through ultra-performance liquid chromatography-quadrupole time-of-flight mass spectrometry.A variety of amino acids and functional dipeptides were identified during the traditional brewing of Hongqu aged vinegar.Correlation analysis revealed that Lactobacillus was significantly associated with DL-lactate,indolelactic acid,D-(+)-3-phenyllactic acid,pimelic acid,pregabalin and 3-aminobutanoic acid.This study is useful for understanding flavor formation mechanism and developing effective strategies for the suitable strains selection to improve the flavor quality of Hongqu aged vinegar.

Fluorinated semi-interpenetrating polymer networks for enhancing the mechanical performance and storage stability of polymer-bonded explosives by controlling curing and phase separation rates

Herein, the effect of fluoropolymer binders on the properties of polymer-bonded explosives(PBXs) was comprehensively investigated. To this end, fluorinated semi-interpenetrating polymer networks(semiIPNs) were prepared using different catalyst amounts(denoted as F23-CLF-30-D). The involved curing and phase separation processes were monitored using Fourier-transform infrared spectroscopy, differential scanning calorimetry, a haze meter and a rheometer. Curing rate constant and activation energy were calculated using a theoretical model and numerical method, respectively. Results revealed that owing to its co-continuous micro-phase separation structure, the F23-CLF-30-D3 semi-IPN exhibited considerably higher tensile strength and elongation at break than pure fluororubber F2314 and the F23-CLF-30-D0 semi-IPN because the phase separation and curing rates matched in the initial stage of curing.An arc Brazilian test revealed that F23-CLF-30-D-based composites used as mock materials for PBXs exhibited excellent mechanical performance and storage stability. Thus, the matched curing and phase separation rates play a crucial role during the fabrication of high-performance semi-IPNs;these factors can be feasibly controlled using an appropriate catalyst amount.