Influencing factors analysis of hard limestone reformation and strength weakening under acidic effect

Roof disaster has always been an important factor restricting coal mine safety production.Acidic effect can reform the rock mass structure to weaken the macroscopic strength characteristics,which is an effective way to control the hard limestone roof.In this study,the effects of various factors on the reaction characteristics and mechanical properties of limestone were analyzed.The results show that the acid with stronger hydrogen production capacity after ionization(pK_(a)<0)has more prominent damage to the mineral grains of limestone.When pKa increases from−8.00 to 15.70,uniaxial compressive strength and elastic modulus of limestone increase by 117.22%and 75.98%.The influence of acid concentration is manifested in the dissolution behavior of mineral crystals,the crystal defects caused by large-scale acid action will lead to the deterioration of limestone strength,and the strength after 15%concentration reformation can be reduced by 59.42%.The effect of acidification time on limestone has stages and is the most obvious in the initial metathesis reaction stage(within 60 min).The key to the strength damage of acidified limestone is the participation of hydrogen ions in the reaction system.Based on the analytic hierarchy process method,the influence weights of acid type,acid concentration and acidification time on strength are 24.30%,59.54% and 16.16%,respectively.The research results provide theoretical support for the acidification control of hard limestone roofs in coal mines.

Revisiting the mitigation of coke formation:Synergism between support&promoters'role toward robust yield in the CO_(2)reformation of methane

CO_(2)reformation of methane(CRM)and CO_(2)methanation are two interconnected processes with significant implications for greenhouse gas reduction and sustainable energy production for industrial purposes.While Nibased catalysis suffers from poor stability due to coke formation or sintering,we report a super stable remedy.The active sites of mesoporous MgO were loaded using wet impregnation.The incorporation of Ni and promoters altered the physical features of the catalysts.Sm–Ni/MgO showed the smallest crystallite size,specific surface area,and pore volume.The Sm–Ni/MgO catalyst was selected as the most suitable candidate for CRM,with 82%CH4 and H2/CO ratio of approximately 100%and also for CO_(2)methanation with the conversion of carbon dioxide(82%)and the selectivity toward methane reaches 100%at temperatures above 300ᵒC.Furthermore,the Sm–Ni/MgO catalyst was stable for 900 min of continuous reaction,without significant carbon deposition.This stability was largely due to the high oxygen mobility on the catalyst surface in the presence of Sm.Overall,we demonstrated the efficacy of using promoted Ni catalysts supported by mesoporous magnesia for the improved reformation of greenhouse gases.

Research on the Joint Reformation for Public Health Services, Medical Insurance and Medical Production Circulation from the Perspective of System Science

Objective To study the linkage points in the reform of public health services,medical insurance and medical production circulation and provide countermeasures for optimizing the reform.Methods The theory of system science was used to analyze the new emergent property of key linkage points in the main reform departments.Results and Conclusion The research found that four linkage points were not active,and all departments of the reform should strengthen their linkage in the following aspects.The departmental linkage in the decision-making mechanism should be strengthened,which requires to revise the assessment indicators of essential drugs in time,and carry out relevant policies.Besides,the linkage of various departments to supervise the use of medical insurance fund should be strengthened.Therefore,the National Health Commission(NHC)and National Medical Products Administration(NMPA)should play their supervisory roles.Lastly,the construction of adverse reaction data sharing platform should be improved.

Overview of the Reports on the Reformation of Personal Income Taxation

Presentation of the reports on the reformation of personal income taxation that have been prepared with a development plan for the Greek economy,that discuss the issue of taxation and point out its important features.The goal is the complete modernization of the tax system,so that it responds more fully to the principles of social justice,contributes to the economic development of the country and is governed by simple and modern procedures,which apply to all tax objects.The purpose of the study is to deepen the proposals for tax reform based on the peculiarities of the Greek economy,the international trends in this field and the weaknesses of the tax system.The effects of a tax reformation are analyzed and how it should take the form of the reform,which,however,requires a new legislation,which will bring about radical and deep cuts,which respond to the new conditions and the internationalization of the economy.Proposals for a set of structural measures,which are necessary for the country’s adaptation to the wider European environment and the elimination of the weaknesses that increase its distance from the other member countries.Citation of the common points of the reports on the reformation of personal income taxation and their adoption by the tax leadership.

Upcycling municipal solid waste to sustainable hydrogen via two-stage gasification-reforming

As global municipal solid waste(MSW)quantities continue to escalate,serious socio-environmental challenges arise,necessitating innovative solutions.Waste-to-hydrogen(WTH)via two-stage gasification-reforming(TSGR)presents an emergent technology for MSW upcycling,offering to ease waste management burdens and bolster the burgeoning hydrogen economy.Despite early initiatives to advance TSGR technology,a cohesive and critical analysis of cutting-edge knowledge and strategies to enhance hydrogen production remains lacking.This review aggregates literature on MSW upcycling to hydrogen via TSGR,with a focus on optimizing process control and catalytic efficiency.It underscores technological avenues to augment hydrogen output,curtail catalyst costs,and refine system performance.Particularly,the review illuminates the potential for integrating chemical and calcium looping into TSGR processes,identifying opportunities,and pinpointing challenges.The review concludes with a summary of the current state of techno-economic analysis for this technology,presenting outstanding challenges and future research directions,with the ultimate goal of transitioning WTH from theoretical to practical application.

Methanol steam reforming for hydrogen production driven by an atomically precise Cu catalyst

Plasmon-induced hot-electron transfer from metal nanostructures is being intensely pursed in current photocatalytic research,however it remains elusive whether molecular-like metal clusters with excitonic behavior can be used as light-harvesting materials in solar energy utilization such as photocatalytic methanol steam reforming.In this work,we report an atomically precise Cu_(13)cluster protected by dual ligands of thiolate and phosphine that can be viewed as the assembly of one top Cu atom and three Cu_(4)tetrahedra.The Cu_(13)H_(10)(SR)_(3)(PR’_(3))_(7)(SR=2,4-dichlorobenzenethiol,PR’_(3)=P(4-FC_(6)H_(4))_(3))cluster can give rise to highly efficient light-driven activity for methanol steam reforming toward H_(2)production.

Chemical looping reforming of the micromolecular component from biomass pyrolysis via Fe_(2)O_(3)@SBA-16

To solve the problems of low gasification efficiency and high tar content caused by solid–solid contact between biomass and oxygen carrier in traditional biomass chemical looping gasification process.The decoupling strategy was adopted to decouple the biomass gasification process,and the composite oxygen carrier was prepared by embedding Fe_(2)O_(3) in molecular sieve SBA-16 for the chemical looping reforming process of pyrolysis micromolecular model compound methane,which was expected to realize the directional reforming of pyrolysis volatiles to prepare hydrogen-rich syngas.Thermodynamic analysis of the reaction system was carried out based on the Gibbs free energy minimization method,and the reforming performance was evaluated by a fixed bed reactor,and the kinetic parameters were solved based on the gas–solid reaction model.Thermodynamic analysis verified the feasibility of the reaction and provided theoretical guidance for experimental design.The experimental results showed that the reaction performance of Fe_(2)O_(3)@SBA-16 was compared with that of pure Fe_(2)O_(3) and Fe_(2)O_(3)@SBA-15,and the syngas yield was increased by 55.3%and 20.7%respectively,and it had good cycle stability.Kinetic analysis showed that the kinetic model changed from three-dimensional diffusion to first-order reaction with the increase of temperature.The activation energy was 192.79 kJ/mol by fitting.This paper provides basic data for the directional preparation of hydrogen-rich syngas from biomass and the design of oxygen carriers for pyrolysis of all-component chemical looping reforming.

Research on the Reform of the Process-Tracking Ideological and Political Assessment System in Applied Universities:Taking the Personal Finance Course as an Example

Using the Xi’an Mingde Institute of Technology students as the teaching object and the Personal Finance course as an example,we explore the reform of the ideological and political assessment system of process-tracking courses in applied universities.The article analyzes the feasibility of applying the curriculum ideological and political assessment system in college courses and compares the traditional assessment system.It also proposes that applying curriculum ideological and political assessment to the college curriculum assessment system will help improve students’understanding of the“value guidance”in curriculum ideological and political education and enhance the teaching effect.

Optimizing the sulfur-resistance and activity of perovskite oxygen carrier for chemical looping dry reforming of methane

Perovskite oxides has been attracted much attention as high-performance oxygen carriers for chemical looping reforming of methane,but they are easily inactivated by the presence of trace H_(2)S.Here,we propose to modulate both the activity and resistance to sulfur poisoning by dual substitution of Mo and Ni ions with the Fe-sites of LaFeO_(3)perovskite.It is found that partial substitution of Ni for Fe substantially improves the activity of LaFeO_(3)perovskite,while Ni particles prefer to grow and react with H_(2)S during the long-term successive redox process,resulting in the deactivation of oxygen carriers.With the presence of Mo in LaNi_(0.05)Fe_(0.95)O_(3−σ)perovskite,H_(2)S preferentially reacts with Mo to generate MoS_(2),and then the CO_(2)oxidation can regenerate Mo via removing sulfur.In addition,Mo can inhibit the accumulation and growth of Ni,which helps to improve the redox stability of oxygen carriers.The LaNi_(0.05)Mo_(0.07)Fe_(0.88)O_(3−σ)oxygen carrier exhibits stable and excellent performance,with the CH_(4)conversion higher than 90%during the 50 redox cycles in the presence of 50 ppm H_(2)S at 800℃.This work highlights a synergistic effect in the perovskite oxides induced by dual substitution of different cations for the development of high-performance oxygen carriers with excellent sulfur tolerance.

Using Aspen HYSYS to Develop a Custom Molecule-based Reformer Model

A new continuous catalytic reforming model was configured by using a molecule-based reactor module. Themodel was based on the Sinopec Research Institute of Petroleum Processing Co., Ltd. continuous catalytic reformer fullmodel, and was reduced to a size of 157 naphtha molecules (C1−C12) that underwent 764 reactions. The new model inheritedthe advantages of the original model, and had better solving performance and flexibility owing to support by the AspenHYSYS environment. Typical commercial plant data were selected for model validation, which showed advantages in theaccuracy of detailed predictions and the range of its application. In addition, the solving time was reduced from minutes toseconds. Therefore, the simplified model proved to be feasible for industrial application.

Exploring the 2023 Reformation of Financial Systems in Higher Education Institutions and Examining the Practical Aspects of its Execution

As China’s economy has experienced rapid growth,the economic landscape for higher education institutions’financial systems has become increasingly intricate.Consequently,there has been a heightened demand for enhanced financial management in these institutions.Notably,in 2012,the country’s Ministry of Finance and Ministry of Education introduced a new financial system for higher education institutions,and in 2022,the Ministry of Finance publicly revised this system to further standardize financial practices within higher education institutions,align with financial management requirements,and foster the development of these institutions.This paper offers an extensive examination of the updated financial system for higher education institutions compared to the previous version,delving into aspects such as the financial management framework,professionalization criteria for financial directors,enhancements in managing the proceeds from technology and research achievements,and the incorporation of management accounting reports.Additionally,it provides a comprehensive analysis of the challenges faced by financial management in higher education institutions and outlines strategies for addressing these issues.

Machine learning-driven optimization of plasma-catalytic dry reforming of methane

This study investigates the dry reformation of methane(DRM)over Ni/Al_(2)O_(3)catalysts in a dielectric barrier discharge(DBD)non-thermal plasma reactor.A novel hybrid machine learning(ML)model is developed to optimize the plasma-catalytic DRM reaction with limited experimental data.To address the non-linear and complex nature of the plasma-catalytic DRM process,the hybrid ML model integrates three well-established algorithms:regression trees,support vector regression,and artificial neural networks.A genetic algorithm(GA)is then used to optimize the hyperparameters of each algorithm within the hybrid ML model.The ML model achieved excellent agreement with the experimental data,demonstrating its efficacy in accurately predicting and optimizing the DRM process.The model was subsequently used to investigate the impact of various operating parameters on the plasma-catalytic DRM performance.We found that the optimal discharge power(20 W),CO_(2)/CH_(4)molar ratio(1.5),and Ni loading(7.8 wt%)resulted in the maximum energy yield at a total flow rate of∼51 mL/min.Furthermore,we investigated the relative significance of each operating parameter on the performance of the plasma-catalytic DRM process.The results show that the total flow rate had the greatest influence on the conversion,with a significance exceeding 35%for each output,while the Ni loading had the least impact on the overall reaction performance.This hybrid model demonstrates a remarkable ability to extract valuable insights from limited datasets,enabling the development and optimization of more efficient and selective plasma-catalytic chemical processes.

Reform of Hospitality English Teaching Based on the Educational Concept of Outcome-Based Education(OBE)

The Outcome-Based Education(OBE)educational concept,proposed by renowned American educator Spady,aims to guide students in mastering learning laws and ultimately achieving expected learning outcomes.The application of OBE educational concept in Hospitality English curriculum not only can effectively enhance the learning effect but also promote the reform of the Hospitality English curriculum,thus improving students’learning enthusiasm.Therefore,taking the Hospitality English curriculum as an example,this paper points out the existing problems in the teaching of this course and suggests the reform measures based on the OBE teaching concept,hoping to provide guidelines for related educational work.

A Preliminary Study on the Rural Land System Reform in the Context of Rural Revitalization

With the deepening of reform and opening up,the rural land system has experienced the evolution from contracting to transfer to the current rural revitalization strategy,and has always been closely linked to the well-being of farmers and the vigorous development of the rural economy.The reform of this system is not only a key driving force for rural economic development,but also an important cornerstone for realizing the rural revitalization strategy.Through in-depth analysis of the connotation of rural revitalization and rural land system reform,this study discusses in detail the internal dynamic mechanism of rural land system reform driving rural revitalization,and comprehensively analyzes the current implementation of rural land system reform.On this basis,this study puts forward the strategic concept of promoting the rural land system reform in the context of rural revitalization.Studies have shown that the rural land system reform has mainly played a positive role in the following four aspects in promoting rural revitalization:providing a solid material foundation for rural revitalization,optimizing the allocation of rural resources,promoting the transformation and upgrading of rural industrial structure,and promoting rural social harmony and stability.In the context of the current rural revitalization,the rural land system reform is undoubtedly one of the core issues of China s rural development.In order to further improve this system,we need to continue to optimize and innovate the rural land transfer system,the homestead reform system,and the rural collective construction land market entry system.

Engineering oxygen vacancies on Tb-doped ceria supported Pt catalyst for hydrogen production through steam reforming of long-chain hydrocarbon fuels

Steam reforming of long-chain hydrocarbon fuels for hydrogen production has received great attention for thermal management of the hypersonic vehicle and fuel-cell application.In this work,Pt catalysts supported on CeO_(2)and Tb-doped CeO_(2)were prepared by a precipitation method.The physical structure and chemical properties of the as-prepared catalysts were characterized by powder X-ray diffraction,scanning electron microscopy,transmission electron microscopy,Raman spectroscopy,H_(2)temperature programmed reduction,and X-ray photoelectron spectroscopy.The results show that Tb-doped CeO_(2)supported Pt possesses abundant surface oxygen vacancies,good inhibition of ceria sintering,and strong metal-support interaction compared with CeO_(2)supported Pt.The catalytic performance of hydrogen production via steam reforming of long-chain hydrocarbon fuels(n-dodecane)was tested.Compared with 2Pt/CeO_(2),2Pt/Ce_(0.9)Tb_(0.1)O_(2),and 2Pt/Ce_(0.5)Tb_(0.5)O_(2),the 2Pt/Ce_(0.7)Tb_(0.3)O_(2)has higher activity and stability for hydrogen production,on which the conversion of n-dodecane was maintained at about 53.2%after 600 min reaction under 700℃at liquid space velocity of 9 ml·g^(-1)·h^(-1).2Pt/CeO_(2)rapidly deactivated,the conversion of n-dodecane was reduced to only 41.6%after 600 min.

Controllable synthesis of CuAlO_(2) via solid-phase method and its catalytic performance for methanol steam reforming to hydrogen

This study explores the controllable synthesis of CuAlO_(2) using copper hydroxide and pseudo-boehmite powders as raw materials via a simple solid-phase ball milling method,along with its catalytic performance investigation in methanol steam reforming(MSR).Various catalysts were prepared under different conditions,such as calcination temperature,calcination atmosphere,and heating rate.Characterization techniques including BET,XRD,XPS,SEM and H2-TPR were employed to analyze the samples.The results revealed significant effects of calcination temperature on the phase compositions,specific surface area,reduction performance,and surface properties of the CA-T catalysts.Based on the findings,a synthesis route of CuAlO_(2) via the solid-phase method was proposed,highlighting the importance of high calcination temperature,nitrogen atmosphere,and low heating rate for CuAlO_(2) formation.Catalytic evaluation data demonstrated that CuAlO_(2) could catalyze MSR without pre-reduction,with the catalytic performance of CA-T catalysts being notably influenced by calcination temperature.Among the prepared catalysts,the CA-1100 catalyst exhibited the highest catalytic activity and stability.The findings of this study might be useful for the further study of the catalytic material for sustained release catalysis,including the synthesis of catalytic materials and the regulation of sustained release catalytic performance.

Steam reforming of acetic acid over Ni/biochar of low metal-loading:Involvement of biochar in tailoring reaction intermediates renders superior catalytic performance

Biochar is a reactive carrier as it may be partially gasified with steam in steam reforming,which could influence the formation of reaction intermediates and modify catalytic behaviors.Herein,the Ni/biochar as well as two comparative catalysts,Ni/Al_(2)O_(3) and Ni/SiO_(2),with low nickel loading(2%(mass))was conducted to probe involvement of the varied carriers in the steam reforming.The results indicated that the Ni/biochar performed excellent catalytic activity than Ni/SiO_(2) and Ni/Al_(2)O_(3),as the biochar carrier facilitated quick conversion of the -OH from dissociation of steam to gasify the oxygen-rich carbonaceous intermediates like C=O and C-O-C,resulting in low coverage while high exposure of nickel species for maintaining the superior catalytic performance.In converse,strong adsorption of aliphatic intermediates over Ni/Al_(2)O_(3) and Ni/SiO_(2) induced serious coking with polymeric coke as the main type(21.5%and 32.1%,respectively),which was significantly higher than that over Ni/biochar(3.9%).The coke over Ni/biochar was mainly aromatic or catalytic type with nanotube morphology and high crystallinity.The high resistivity of Ni/biochar towards coking was due to the balance between formation of coke and gasification of coke and partially biochar with steam,which created developed mesopores in spent Ni/biochar while the coke blocked pores in Ni/Al_(2)O_(3) and Ni/SiO_(2) catalysts.

Ethanol steam reforming over Ni/ZSM-5 nanosheet for hydrogen production

Compared to reforming reactions using hydrocarbons,ethanol steam reforming(ESR)is a sustainable alternative for hydrogen(H_(2))production since ethanol can be produced sustainably using biomass.This work explores the catalyst design strategies for preparing the Ni supported on ZSM-5 zeolite catalysts to promote ESR.Specifically,two-dimensional ZSM-5 nanosheet and conventional ZSM-5 crystal were used as the catalyst carriers and two synthesis strategies,i.e.,in situ encapsulation and wet impregnation method,were employed to prepare the catalysts.Based on the comparative characterization of the catalysts and comparative catalytic assessments,it was found that the combination of the in situ encapsulation synthesis and the ZSM-5 nanosheet carrier was the effective strategy to develop catalysts for promoting H_(2) production via ESR due to the improved mass transfer(through the 2-D structure of ZSM-5 nanosheet)and formation of confined small Ni nanoparticles(resulted via the in situ encapsulation synthesis).In addition,the resulting ZSM-5 nanosheet supported Ni catalyst also showed high Ni dispersion and high accessibility to Ni sites by the reactants,being able to improve the activity and stability of catalysts and suppress metal sintering and coking during ESR at high reaction temperatures.Thus,the Ni supported on ZSM-5 nanosheet catalyst prepared by encapsulation showed the stable performance with~88% ethanol conversion and~65% H_(2) yield achieved during a 48-h longevity test at 550-C.

Regulating crystal phase of TiO_(2) to enhance catalytic activity of Ni/TiO_(2) for solar-driven dry reforming of methane

Ni/TiO_(2) catalyst is widely employed for photo-driven DRM reaction while the influence of crystal structure of TiO_(2) remains unclear.In this work,the rutile/anatase ratio in supports was successfully controlled by varying the calcination temperature of anatase-TiO_(2).Structural characterizations revealed that a distinct TiO_(x) coating on the Ni nanoparticles(NPs)was evident for Ni/TiO_(2)-700 catalyst due to strong metal-support interaction.It is observed that the TiOx overlayer gradually disappeared as the ratio of rutile/anatase increased,thereby enhancing the exposure of Ni active sites.The exposed Ni sites enhanced visible light absorption and boosted the dissociation capability of CH4,which led to the much elevated catalytic activity for Ni/TiO_(2)-950 in which rutile dominated.Therefore,the catalytic activity of solar-driven DRM reaction was significantly influenced by the rutile/anatase ratio.Ni/TiO_(2)-950,characterized by a predominant rutile phase,exhibited the highest DRM reactivity,with remarkable H_(2) and CO production rates reaching as high as 87.4 and 220.2 mmol/(g·h),respectively.These rates were approximately 257 and 130 times higher,respectively,compared to those obtained on Ni/TiO_(2)-700 with anatase.This study suggests that the optimization of crystal structure of TiO_(2) support can effectively enhance the performance of photothermal DRM reaction.

Exploring the Ideological and Political Education Reformation of Architecture Professional Courses in Higher Education Institutions

"Ideological and political education"is an essential implementation for moral cultivation,which promotes the basic principles of"three comprehensive education".Its teaching effectiveness is related to the overall improvement of the quality of talent cultivation;hence it widely attracts the attention of the academic community.In order to combine professional architectural courses with ideological and political education,and at the same time to realize the innovative teaching concept of collaborative education,teachers in higher education institutions continue to explore and practice their ways,constantly innovate and optimize their knowledge and education systems.