The characterization analysis of three agro-industrial wastes was performed in order to study its thermal gasification. Some analyses such as determination of Ca, K and Mg concentration and determination of three repr...The characterization analysis of three agro-industrial wastes was performed in order to study its thermal gasification. Some analyses such as determination of Ca, K and Mg concentration and determination of three representative toxic metals concentration Cd, Cr and Pb in all its oxidation states and the fundamental state, were carried out. The heavy metals concentration was also determined in the ashes obtained during the gasification process. The mobility of these elements was studied through three leaching tests. The behavior of heavy metals, sulfur and chlorine compounds, was predicted considering the presence of water vapor, syngas, Ca, Mg, K, Si, Al and other ash components. The heavy metals are not more concentrated in the gasification ash;these pollutants are released during this process. Ca, Mg and K presence in these residues would promote the pollutants retention. The ash of the studied waste can be disposed in controlled landfills or used in road construction, according to the obtained results during the leaching test DIN-DEV S4. The obtained results in the leaching test EPA 1311 TLCP classify these gasification ashes as no toxic waste.展开更多
This study was carried out to determine the chemical composition and in situ degradability of agro-industrial by-products found in Eritrea. Three categories of by-products were evaluated and were the milling industry ...This study was carried out to determine the chemical composition and in situ degradability of agro-industrial by-products found in Eritrea. Three categories of by-products were evaluated and were the milling industry (wheat bran;WB, short;WS, and middling;WM), brewery (brewers’ dry grain;BDG, hops;BDH, and yeast;BDY) and sesame cakes (sesame cake machine extracted;SCM and manually extracted;SCT). The dry matter (DM) varied between 88.46% in BDY to 92.39% in SCT. The lowest (P < 0.05) crude protein (CP) content was recorded in WM at 10.11% while the highest was from the BDY at 48.20%. The metabolisable energy (ME) value of the agro-industrial by-products ranged from 8.72 to 11.18 MJ per kg DM with the BDH recording the lowest value (P The sesame cakes (SCM and SCT) recorded higher values of 11.17 and 11.18 MJ per kg DM respectively. The SCT recorded the highest ash content at 10.93% followed by BDY at 10.16% with the least being obtained from WM at 2.48%. The ether extract and acid detergent lignin contents were generally low in all cases for all the by-products. Generally, the results indicated that there was no clear pattern in terms of nutrients content amongst the by-products. The in situ DM, organic matter (OM) and CP degradability differed amongst and within the sesame cakes, milling and brewery by-products. The wide variation in chemical composition, DM, OM, CP degradability, and ME obtained from this study offer farmers huge flexibility in formulating rations according to the productive performance of target animals.展开更多
Accumulation of recalcitrant plastics in the environment has become a world-wide problem in today’s societies. Rapid depletion of natural resources for synthetic plastics along with environmental concerns has directe...Accumulation of recalcitrant plastics in the environment has become a world-wide problem in today’s societies. Rapid depletion of natural resources for synthetic plastics along with environmental concerns has directed research towards finding alternatives to petroleum-based polymers. Poly(3-hydroxybutyric acid) P(3HB), as one of these alternatives, have attracted much attention in recent years due to their varied mechanical properties, biocompatibility and biodegradability. The aim of this study was to identify an agro-industrial waste resource economically suitable for large-scale production of P(3HB), to optimize the production using Response Surface Methodology in small-scale and subsequently, to test the production in a continuously stirred tank reactor. Among a range of agro-industrial waste, orange peel was selected as the most suitable for P(3HB) production. P(3HB) concentration of 1.24 g P(3HB)/L culture broth with 41% P(3HB)/dcw yield was obtained using orange peel as the sole carbon source in optimized medium with a modified strain of Bacillus subtilis (B. subtilis OK2).展开更多
Coir pith, a byproduct of coconut husk is difficult to decompose due to its high lignin and cellulose content. In this study, coir pith was composted with different agro industrial by products such as cow dung, vegeta...Coir pith, a byproduct of coconut husk is difficult to decompose due to its high lignin and cellulose content. In this study, coir pith was composted with different agro industrial by products such as cow dung, vegetable market waste, poultry waste and microbial consortium. The different treatment combinations used in the present study were Control, T1 (Coir pith + Cow dung + Vegetable market waste + Poultry waste + mixed microbial culture (Trichoderma viridae + Pleurotus sajar caju), T2 (Coir pith + Vegetable market waste + Poultry waste + Tank slit + Mixed microbial culture) and T3 (Coir pith + Cow dung + poultry waste + tank slit + mixed microbial culture). At the end of 12th week, in the treatment T1, C: N ratio of 21.8:1 was observed in the composted coir pith sample. Highest P content of 0.47% and K content of 1.2% and the least Cellulose and Lignin contents of 22.8% and 10.03% were recorded in the T1 treatment after a composting period of 12 weeks. Highest pH of 7.4 was observed in the treatment T3, this was followed by T1 (7.2) treatment.展开更多
Considered as a top priority of industrial devel- opment, Industry 4.0 （or Industrie 4.0 as the German ver- sion） has being highlighted as the pursuit of both academy and practice in companies. In this paper, based ...Considered as a top priority of industrial devel- opment, Industry 4.0 （or Industrie 4.0 as the German ver- sion） has being highlighted as the pursuit of both academy and practice in companies. In this paper, based on the review of state of art and also the state of practice in dif- ferent countries, shortcomings have been revealed as the lacking of applicable framework for the implementation of Industrie 4.0. Therefore, in order to shed some light on the knowledge of the details, a reference architecture is developed, where four perspectives namely manufacturing process, devices, software and engineering have been highlighted. Moreover, with a view on the importance of Cyber-Physical systems, the structure of Cyber-Physical System are established for the in-depth analysis. Further cases with the usage of Cyber-Physical System are also arranged, which attempts to provide some implications to match the theoretical findings together with the experience of companies. In general, results of this paper could be useful for the extending on the theoretical understanding of Industrie 4.0. Additionally, applied framework and proto- types based on the usage of Cyber-Physical Systems are also potential to help companies to design the layout of sensor nets, to achieve coordination and controlling of smart machines, to realize synchronous production with systematic structure, and to extend the usage of information and communication technologies to the maintenance scheduling.展开更多
The aim of this study is to examine the buyer-seller re-lationship in Hong Kong’s clothing industry.The initialpart investigated the industry’s environment.Four hy-pothesis were developed which were based on the lon...The aim of this study is to examine the buyer-seller re-lationship in Hong Kong’s clothing industry.The initialpart investigated the industry’s environment.Four hy-pothesis were developed which were based on the long-term buyer-seller relationships’features.The benefitsthat can enjoy within the stage of long-term buyer-seller relationships was the defined and suggested.展开更多
3 - dimensional body measurement technology, the basis of developing high technology in industry, accelerates digital development of aplparel industry. This paper briefly introduces the history of 3 - dimensional body...3 - dimensional body measurement technology, the basis of developing high technology in industry, accelerates digital development of aplparel industry. This paper briefly introduces the history of 3 - dimensional body measurement technology, and recounts the principle and primary structure of some types of 3 - dimensional automatic body measurement system. With this understanding, it discusses prospect of 3- dimensional CAD and virtual technology used in apparel industry.展开更多
The feasibility of utilizing soybean-processing residues such as soybean meal and hulls as substrates for chitosan production by the fungus Mucor rouxii ATCC 24905 via solid-state fermentation (SSF) was investigated. ...The feasibility of utilizing soybean-processing residues such as soybean meal and hulls as substrates for chitosan production by the fungus Mucor rouxii ATCC 24905 via solid-state fermentation (SSF) was investigated. The effects of the type of soybean-based substrate, length of cultivation period, substrate moisture content, substrate pH, incubation temperature and extraction conditions on chitosan yield were determined. The results showed that a maximum fungal chitosan yield of up to 3.44% by dry substrate weight (34.4 g/kg) could be achieved using a pure soybean meal substrate with an initial moisture content of 50% (w/w) and pH of 5 - 6 incubated for six days at 25°C. A more severe heat treatment (autoclaving vs. refluxing) resulted in higher chitosan extraction yields regardless of the strength of extraction reagents. Fourier transform infrared (FTIR) analysis of the fungal chitosan revealed its degree of deacetylation (DDA) to be between 55% and 60%.展开更多
日本东北大学（Tohoku University）研究人员开发出一种可催化甘油制备高功能性聚对苯二甲酸三亚甲基二醇酯（PPT）纤维原料1，3-丙二醇的高性能催化剂。该项目由日本新能源产业技术综合开发机构（New Energy and Industrial Technology...日本东北大学（Tohoku University）研究人员开发出一种可催化甘油制备高功能性聚对苯二甲酸三亚甲基二醇酯（PPT）纤维原料1，3-丙二醇的高性能催化剂。该项目由日本新能源产业技术综合开发机构（New Energy and Industrial Technology Development Organization，NEDO）资助，预期这种高性能催化剂能为生物柴油生产厂产生的副产物甘油提供商业出路。展开更多
The inspection and quarantine standard is one of important basics to executeinspection and quarantine by laws. In recent years, with the development of economy and trade inChina, standardization has played an importan...The inspection and quarantine standard is one of important basics to executeinspection and quarantine by laws. In recent years, with the development of economy and trade inChina, standardization has played an important role in inspection and quarantine. During 2002-2004,department of Standards of Inspection and Quarantine, Certification and Accreditation Administrationof China has organized the research of the standards of inspection and quarantine, and has builtstandard sub- systems of nine fields in inspection and quarantine.展开更多
The 16th National Congress of the Communist Party of China was held inNovember 2002. In the five years since then, great changes took place in Chinesepower industry. Power institutional reform was deepened; the constr...The 16th National Congress of the Communist Party of China was held inNovember 2002. In the five years since then, great changes took place in Chinesepower industry. Power institutional reform was deepened; the construction ofboth power sources and power grids was speeded up; the tense situation of powersupply and demand was alleviated; the safety and reliability of power productionwere improved; the management on power tariff was standardized; environmentalprotection and energy conservation achieved good results; researches on newtechnologies made new achievements; and the operation of enterprises was im-proved.展开更多
Although in 2010 textile industry still faces a series of uncertain factors, and export growth is difficult to recover in a short time, the domestic market will continue to play a significant role in the industry, str...Although in 2010 textile industry still faces a series of uncertain factors, and export growth is difficult to recover in a short time, the domestic market will continue to play a significant role in the industry, structure adjustment and industrial upgrading will be carried out further in the nation. In the condition of the gradually stable international market environment, rebound can be seen in Chinese textile industry.展开更多
文摘The characterization analysis of three agro-industrial wastes was performed in order to study its thermal gasification. Some analyses such as determination of Ca, K and Mg concentration and determination of three representative toxic metals concentration Cd, Cr and Pb in all its oxidation states and the fundamental state, were carried out. The heavy metals concentration was also determined in the ashes obtained during the gasification process. The mobility of these elements was studied through three leaching tests. The behavior of heavy metals, sulfur and chlorine compounds, was predicted considering the presence of water vapor, syngas, Ca, Mg, K, Si, Al and other ash components. The heavy metals are not more concentrated in the gasification ash;these pollutants are released during this process. Ca, Mg and K presence in these residues would promote the pollutants retention. The ash of the studied waste can be disposed in controlled landfills or used in road construction, according to the obtained results during the leaching test DIN-DEV S4. The obtained results in the leaching test EPA 1311 TLCP classify these gasification ashes as no toxic waste.
文摘This study was carried out to determine the chemical composition and in situ degradability of agro-industrial by-products found in Eritrea. Three categories of by-products were evaluated and were the milling industry (wheat bran;WB, short;WS, and middling;WM), brewery (brewers’ dry grain;BDG, hops;BDH, and yeast;BDY) and sesame cakes (sesame cake machine extracted;SCM and manually extracted;SCT). The dry matter (DM) varied between 88.46% in BDY to 92.39% in SCT. The lowest (P < 0.05) crude protein (CP) content was recorded in WM at 10.11% while the highest was from the BDY at 48.20%. The metabolisable energy (ME) value of the agro-industrial by-products ranged from 8.72 to 11.18 MJ per kg DM with the BDH recording the lowest value (P The sesame cakes (SCM and SCT) recorded higher values of 11.17 and 11.18 MJ per kg DM respectively. The SCT recorded the highest ash content at 10.93% followed by BDY at 10.16% with the least being obtained from WM at 2.48%. The ether extract and acid detergent lignin contents were generally low in all cases for all the by-products. Generally, the results indicated that there was no clear pattern in terms of nutrients content amongst the by-products. The in situ DM, organic matter (OM) and CP degradability differed amongst and within the sesame cakes, milling and brewery by-products. The wide variation in chemical composition, DM, OM, CP degradability, and ME obtained from this study offer farmers huge flexibility in formulating rations according to the productive performance of target animals.
文摘Accumulation of recalcitrant plastics in the environment has become a world-wide problem in today’s societies. Rapid depletion of natural resources for synthetic plastics along with environmental concerns has directed research towards finding alternatives to petroleum-based polymers. Poly(3-hydroxybutyric acid) P(3HB), as one of these alternatives, have attracted much attention in recent years due to their varied mechanical properties, biocompatibility and biodegradability. The aim of this study was to identify an agro-industrial waste resource economically suitable for large-scale production of P(3HB), to optimize the production using Response Surface Methodology in small-scale and subsequently, to test the production in a continuously stirred tank reactor. Among a range of agro-industrial waste, orange peel was selected as the most suitable for P(3HB) production. P(3HB) concentration of 1.24 g P(3HB)/L culture broth with 41% P(3HB)/dcw yield was obtained using orange peel as the sole carbon source in optimized medium with a modified strain of Bacillus subtilis (B. subtilis OK2).
文摘Coir pith, a byproduct of coconut husk is difficult to decompose due to its high lignin and cellulose content. In this study, coir pith was composted with different agro industrial by products such as cow dung, vegetable market waste, poultry waste and microbial consortium. The different treatment combinations used in the present study were Control, T1 (Coir pith + Cow dung + Vegetable market waste + Poultry waste + mixed microbial culture (Trichoderma viridae + Pleurotus sajar caju), T2 (Coir pith + Vegetable market waste + Poultry waste + Tank slit + Mixed microbial culture) and T3 (Coir pith + Cow dung + poultry waste + tank slit + mixed microbial culture). At the end of 12th week, in the treatment T1, C: N ratio of 21.8:1 was observed in the composted coir pith sample. Highest P content of 0.47% and K content of 1.2% and the least Cellulose and Lignin contents of 22.8% and 10.03% were recorded in the T1 treatment after a composting period of 12 weeks. Highest pH of 7.4 was observed in the treatment T3, this was followed by T1 (7.2) treatment.
文摘Considered as a top priority of industrial devel- opment, Industry 4.0 （or Industrie 4.0 as the German ver- sion） has being highlighted as the pursuit of both academy and practice in companies. In this paper, based on the review of state of art and also the state of practice in dif- ferent countries, shortcomings have been revealed as the lacking of applicable framework for the implementation of Industrie 4.0. Therefore, in order to shed some light on the knowledge of the details, a reference architecture is developed, where four perspectives namely manufacturing process, devices, software and engineering have been highlighted. Moreover, with a view on the importance of Cyber-Physical systems, the structure of Cyber-Physical System are established for the in-depth analysis. Further cases with the usage of Cyber-Physical System are also arranged, which attempts to provide some implications to match the theoretical findings together with the experience of companies. In general, results of this paper could be useful for the extending on the theoretical understanding of Industrie 4.0. Additionally, applied framework and proto- types based on the usage of Cyber-Physical Systems are also potential to help companies to design the layout of sensor nets, to achieve coordination and controlling of smart machines, to realize synchronous production with systematic structure, and to extend the usage of information and communication technologies to the maintenance scheduling.
文摘The aim of this study is to examine the buyer-seller re-lationship in Hong Kong’s clothing industry.The initialpart investigated the industry’s environment.Four hy-pothesis were developed which were based on the long-term buyer-seller relationships’features.The benefitsthat can enjoy within the stage of long-term buyer-seller relationships was the defined and suggested.
基金item of significant subject construction in Shanghai
文摘3 - dimensional body measurement technology, the basis of developing high technology in industry, accelerates digital development of aplparel industry. This paper briefly introduces the history of 3 - dimensional body measurement technology, and recounts the principle and primary structure of some types of 3 - dimensional automatic body measurement system. With this understanding, it discusses prospect of 3- dimensional CAD and virtual technology used in apparel industry.
文摘The feasibility of utilizing soybean-processing residues such as soybean meal and hulls as substrates for chitosan production by the fungus Mucor rouxii ATCC 24905 via solid-state fermentation (SSF) was investigated. The effects of the type of soybean-based substrate, length of cultivation period, substrate moisture content, substrate pH, incubation temperature and extraction conditions on chitosan yield were determined. The results showed that a maximum fungal chitosan yield of up to 3.44% by dry substrate weight (34.4 g/kg) could be achieved using a pure soybean meal substrate with an initial moisture content of 50% (w/w) and pH of 5 - 6 incubated for six days at 25°C. A more severe heat treatment (autoclaving vs. refluxing) resulted in higher chitosan extraction yields regardless of the strength of extraction reagents. Fourier transform infrared (FTIR) analysis of the fungal chitosan revealed its degree of deacetylation (DDA) to be between 55% and 60%.
文摘日本东北大学（Tohoku University）研究人员开发出一种可催化甘油制备高功能性聚对苯二甲酸三亚甲基二醇酯（PPT）纤维原料1，3-丙二醇的高性能催化剂。该项目由日本新能源产业技术综合开发机构（New Energy and Industrial Technology Development Organization，NEDO）资助，预期这种高性能催化剂能为生物柴油生产厂产生的副产物甘油提供商业出路。
文摘The inspection and quarantine standard is one of important basics to executeinspection and quarantine by laws. In recent years, with the development of economy and trade inChina, standardization has played an important role in inspection and quarantine. During 2002-2004,department of Standards of Inspection and Quarantine, Certification and Accreditation Administrationof China has organized the research of the standards of inspection and quarantine, and has builtstandard sub- systems of nine fields in inspection and quarantine.
文摘The 16th National Congress of the Communist Party of China was held inNovember 2002. In the five years since then, great changes took place in Chinesepower industry. Power institutional reform was deepened; the construction ofboth power sources and power grids was speeded up; the tense situation of powersupply and demand was alleviated; the safety and reliability of power productionwere improved; the management on power tariff was standardized; environmentalprotection and energy conservation achieved good results; researches on newtechnologies made new achievements; and the operation of enterprises was im-proved.
文摘Although in 2010 textile industry still faces a series of uncertain factors, and export growth is difficult to recover in a short time, the domestic market will continue to play a significant role in the industry, structure adjustment and industrial upgrading will be carried out further in the nation. In the condition of the gradually stable international market environment, rebound can be seen in Chinese textile industry.
