The main objective of this paper is to develop a simpleand efficient numerical model for estimation of heat and mass transfer between water spray drops and airstreamin horizontal parallel flow which enable us to accur...The main objective of this paper is to develop a simpleand efficient numerical model for estimation of heat and mass transfer between water spray drops and airstreamin horizontal parallel flow which enable us to accurateprediction of evaporative cooling performance.Thephysical process of a droplet evaporating in finite airflowhas been studied.Four basic differential equations havebeen developed with their numerical solutions providedby figures.展开更多
Air Washer are employed in large air-conditioning sys-tems for dust removal and for evaporative cooling withappropriate design which can result in energy saving.Topredict the heat and mass transfer in water spray-air-...Air Washer are employed in large air-conditioning sys-tems for dust removal and for evaporative cooling withappropriate design which can result in energy saving.Topredict the heat and mass transfer in water spray-air-flow system,a two-dimensional numerical model simu-lating the conservation of mass,momentum and energyof air and water are developed.Further,drop trajecto-ries in the case of horizontal parallel flow in air washerhave been simulated.The results of the simulations areused to investigate the effect of the initial droplet size,the spray angle and the airflow velocity on the drop ve-locity field and drop trajectories.展开更多
Numerical simulation method is applied in the study oftwo - phase flow dynamics in the eliminator of air wash-er. The carrier phase (air) is treated in Eulerian frame,the water droplets are tracked in the Lagrangian f...Numerical simulation method is applied in the study oftwo - phase flow dynamics in the eliminator of air wash-er. The carrier phase (air) is treated in Eulerian frame,the water droplets are tracked in the Lagrangian frame.A three - dimensional unsteady two - phase flow model isdeveloped. With the help of FLUENT software, air-stream velocity field and water droplets trajectories havebeen illustrated when their mixture passing through tra-ditional folded eliminator. The result of the simulationcan be used to investigate the mechanism of展开更多
The thesis has changed the heat and moisture exchange curves of Swiss Luwa air washer into double efficiency formulas which are widely used in our country with a computer, and also worked out the regression formula of...The thesis has changed the heat and moisture exchange curves of Swiss Luwa air washer into double efficiency formulas which are widely used in our country with a computer, and also worked out the regression formula of heat transfer efficiency(X). This has created favourable condition for us to use computer in our calculation of Luwa air washer.展开更多
On the bads of theory and experiment, this paper studies and analyses the factors such as water - air ratio, air velocity, spraying water pressure and initial water temperature, which affect the heat and mass transfer...On the bads of theory and experiment, this paper studies and analyses the factors such as water - air ratio, air velocity, spraying water pressure and initial water temperature, which affect the heat and mass transfer in air washer , thus can help us to reduce the power consumption and Improve the efficiency of heat and mass transfer.展开更多
The processes of heat and humidity transfer between air and water are what to be studied mainly in the paper, we put forward some main factors which influence the processes of heat and humidity transfer in the air was...The processes of heat and humidity transfer between air and water are what to be studied mainly in the paper, we put forward some main factors which influence the processes of heat and humidity transfer in the air washer. We come to the conclusion that we can change these main factors to achieve different heat and humidity transfer processes and decide processes of heat and humidity transfer of air and water with the initial temperature of spraying water in the air washer. All these results can make things convenient for the air conditioning management.展开更多
The main purpose of the present work is to make a further insight into the procedure of heat and mass transfer between water droplets sprayed and air stream in a direct evaporative air cooler used in air-conditioning ...The main purpose of the present work is to make a further insight into the procedure of heat and mass transfer between water droplets sprayed and air stream in a direct evaporative air cooler used in air-conditioning system in textile mills. The thermodynamic models of the two-phase flow in such a air treatment system have been developed for one row parallel flow spray.The fields of temperature and relative humidity in spraylchamber, as well as the trajectories of sprayed drops have been obtained by calculation. A series of experiment aiming at quantifying the system performance and its influence factors have been conducted. It indicates that the increases of air velocity and water/air ratio while the decrease of nozzle density are favorable. Finally, the comparison between numerical simulation and experimental results have been carried out. Good agreements have been found for outlet air temperaturewhile a maximum error of 10% has been observed for air relative humidity.展开更多
The present work is focused on heat and mass transfer in a direct evaporative air cooler of one row counter flow spray. Models of the two-phase flow in such a air treatment system have been developed. The fields of te...The present work is focused on heat and mass transfer in a direct evaporative air cooler of one row counter flow spray. Models of the two-phase flow in such a air treatment system have been developed. The fields of temperature and relative humidity in spray chamber, as well as the trajectories of sprayed drops have been obtained by numerical method. Experiments aiming at quantifying the system performance and its influence factors have been conducted. It indicates that the increase of air velocity and water/air ratio while the decrease of nozzle density are favorable. The performance of the system of parallel flow spray and counter flow spray have been compared by means of humidifying efficiency. Comparison between numerical simulation and experimental results demonstrate good agreement for outlet air temperature with a maximum error of 8% observed for air relative humidity.展开更多
文摘The main objective of this paper is to develop a simpleand efficient numerical model for estimation of heat and mass transfer between water spray drops and airstreamin horizontal parallel flow which enable us to accurateprediction of evaporative cooling performance.Thephysical process of a droplet evaporating in finite airflowhas been studied.Four basic differential equations havebeen developed with their numerical solutions providedby figures.
文摘Air Washer are employed in large air-conditioning sys-tems for dust removal and for evaporative cooling withappropriate design which can result in energy saving.Topredict the heat and mass transfer in water spray-air-flow system,a two-dimensional numerical model simu-lating the conservation of mass,momentum and energyof air and water are developed.Further,drop trajecto-ries in the case of horizontal parallel flow in air washerhave been simulated.The results of the simulations areused to investigate the effect of the initial droplet size,the spray angle and the airflow velocity on the drop ve-locity field and drop trajectories.
基金Supported by Development Foundation of Dong Hua Univetsity
文摘Numerical simulation method is applied in the study oftwo - phase flow dynamics in the eliminator of air wash-er. The carrier phase (air) is treated in Eulerian frame,the water droplets are tracked in the Lagrangian frame.A three - dimensional unsteady two - phase flow model isdeveloped. With the help of FLUENT software, air-stream velocity field and water droplets trajectories havebeen illustrated when their mixture passing through tra-ditional folded eliminator. The result of the simulationcan be used to investigate the mechanism of
文摘The thesis has changed the heat and moisture exchange curves of Swiss Luwa air washer into double efficiency formulas which are widely used in our country with a computer, and also worked out the regression formula of heat transfer efficiency(X). This has created favourable condition for us to use computer in our calculation of Luwa air washer.
文摘On the bads of theory and experiment, this paper studies and analyses the factors such as water - air ratio, air velocity, spraying water pressure and initial water temperature, which affect the heat and mass transfer in air washer , thus can help us to reduce the power consumption and Improve the efficiency of heat and mass transfer.
文摘The processes of heat and humidity transfer between air and water are what to be studied mainly in the paper, we put forward some main factors which influence the processes of heat and humidity transfer in the air washer. We come to the conclusion that we can change these main factors to achieve different heat and humidity transfer processes and decide processes of heat and humidity transfer of air and water with the initial temperature of spraying water in the air washer. All these results can make things convenient for the air conditioning management.
文摘The main purpose of the present work is to make a further insight into the procedure of heat and mass transfer between water droplets sprayed and air stream in a direct evaporative air cooler used in air-conditioning system in textile mills. The thermodynamic models of the two-phase flow in such a air treatment system have been developed for one row parallel flow spray.The fields of temperature and relative humidity in spraylchamber, as well as the trajectories of sprayed drops have been obtained by calculation. A series of experiment aiming at quantifying the system performance and its influence factors have been conducted. It indicates that the increases of air velocity and water/air ratio while the decrease of nozzle density are favorable. Finally, the comparison between numerical simulation and experimental results have been carried out. Good agreements have been found for outlet air temperaturewhile a maximum error of 10% has been observed for air relative humidity.
文摘The present work is focused on heat and mass transfer in a direct evaporative air cooler of one row counter flow spray. Models of the two-phase flow in such a air treatment system have been developed. The fields of temperature and relative humidity in spray chamber, as well as the trajectories of sprayed drops have been obtained by numerical method. Experiments aiming at quantifying the system performance and its influence factors have been conducted. It indicates that the increase of air velocity and water/air ratio while the decrease of nozzle density are favorable. The performance of the system of parallel flow spray and counter flow spray have been compared by means of humidifying efficiency. Comparison between numerical simulation and experimental results demonstrate good agreement for outlet air temperature with a maximum error of 8% observed for air relative humidity.
