Optimal design of heat exchanger header for coal gasification in supercritical water through CFD simulations

Heat exchangers play an important role in supercritical water coal gasification systems for heating feed and cooling products. However, serious deposition and plugging problems always exist in heat exchangers. CFD modeling was used to simulate the transport characteristics of solid particles in supercdtical water through the shell and tube of heat exchangers to alleviate the problems. In this paper, we discuss seven types of exchangers CA, B, C D, E, F and G）, which vary in inlet nozzle configuration, header height, inlet pipe diameter and tube pass distribution. In the modeling, the possibility of deposition in the header was evaluated by accumulated mass of particles; we used the velocity contour of supercritical water （SCW） to evaluate the uniformity of the velocity dis- tribution among the tube passes. Simulation results indicated that the optimum heat exchanger had structure F, which had a rectangular configuration of tube pass distractions, a bottom inlet, a 200-mm header height and a 10-ram inlet pipe diameter.

Potential reduction in water consumption of greenhouse evaporative coolers in arid areas via earth-tube heat exchangers

This study aimed to explore the potential of developing a novel cooling system combining a greenhouse and an earth-tube heat exchanger(ETHE).In this system,greenhouse air is circulated through the underneath soil mass to use the deep-soil cooling effect.This was achieved through the following steps.First,soil temperature profile inside and outside the cultivated greenhouse was monitored for almost one year to study the possibility of using deep-soil coldness for cooling the greenhouse air.Second,a prototype ETHE was built to practically investigate the potential reduction in air temperature as the air flows inside the deep earth pipes.Third,a prototype greenhouse was erected to study the ETHE concept.Results from the first experiment revealed that soil temperature at a soil depth of 2.5 m inside the greenhouse offers good conditions to bury the ETHE.The soil temperature at this soil depth was below the maximum temperature(32℃)that most greenhouse crops can withstand.Results from the prototype ETHE showed a slight reduction in air temperature as it passed through the pipes.From the prototype of the integrated greenhouse and ETHE system,reduction in air temperature was observed as the air passed through the ETHE pipes.At night,the air was heated up across the ETHE pipes,indicating that the ETHE was working as a heater.We concluded from this study that greenhouses in arid climates can be cooled using the ETHE concept which would save a large amount of water that would otherwise be consumed in the evaporative coolers.Further investigations are highly encouraged.

Modelling plant canopy effects on water-heat exchange in the freezingthawing processes of active layer on the Qinghai-Tibet Plateau

The effect of vegetation on the water-heat exchange in the freezing-thawing processes of active layer is one of the key issues in the study of land surface processes and in predicting the response of alpine ecosystems to climate change in permafrost regions. In this study, we used the simultaneous heat and water model to investigate the effects of plant canopy on surface and subsurface hydrothermal dynamics in the Fenghuoshan area of the QinghaiTibet Plateau by changing the leaf area index(LAI) and keeping other variables constant. Results showed that the sensible heat, latent heat and net radiation are increased with an increase in the LAI. However, the ground heat flux decreased with an increasing LAI. The annual total evapotranspiration and vegetation transpiration ranged from-16% to 9% and-100% to 15%, respectively, in response to extremes of doubled and zero LAI, respectively. There was a negative feedback between vegetation and the volumetric unfrozen water content at 0.2 m through changing evapotranspiration. The simulation results of soil temperature and moisture suggest that better vegetation conditions are conducive to maintaining the thermal stability of the underlying permafrost, and the advanced initial thawing time and increasing thawing rate of soil ice with the increase in the LAI may have a great influence on the timing and magnitude of supra-permafrost groundwater. This study quantifies the impact of vegetation change on surface and subsurface hydrothermal processes and provides a basic understanding for evaluating the impact of vegetation degradation on the water-heat exchange in permafrost regions under climate change.

Improved Efficiency of Heat Exchange Using KELEA Activated Water

An environmental force termed KELEA (kinetic energy limiting electrostatic attraction) is postulated to reduce the strength of intermolecular (hydrogen) bonding of water molecules, resulting in increased kinetic activity of the water. While regular water does not directly absorb KELEA from the environment, various dipolar compounds with separated electrical charges can seemingly act as a primary antenna for KELEA, with secondary transfer of energy into nearby water. Moreover, once sufficiently activated, the separated electrical charges in activated water can apparently function as a receiver for KELEA, leading to further activation of the water and also to the activation of added water. Prior publications have addressed the agricultural and potential clinical benefits of using KELEA activated water. This article is intended as the first in a series of papers describing useful industrial applications of KELEA activated water. The focus of the present paper is on the improved efficiency of industrial water heating and cooling systems by using KELEA activated water provided by pelleted, ground and heated volcanic rock as supplied by Kiko Technology.

On the heat budget and water mass exchange in the Andaman Sea

The characteristics of the T/S structures,water mass exchange and deep circulation in the Andaman Sea are investigated based on the simulation from a high-resolution general circulation model(MITgcm).The results show that,below 1000 m,the water mass is saltier,warmer and more homogeneous in the Andaman Sea than that in the Bay of Bengal,attributing to the strong vertical mixing at the depth of^1800 m.The water mass exchange between the Andaman Sea and the Bay of Bengal goes through three major channels,which manifests itself as follows:the northern channel(Preparis Channel)is the main passage of water mass transport from the Bay of Bengal to the Andaman Sea,whereas the Middle Channel(the south of Andaman Islands and the north of Nicobar Islands)has an opposite transport;the southern channel(Great Channel)features with a four-layer water exchange which results in the least net transport among the three channels;all the transports through the three channels have an intra-annual variation with a period of half a year.At 1000-m depth,the entire Andaman Sea is occupied by a cyclonic circulation in January and July while by an anticyclonic one in April and October.The semiannual cycle found in both the deep circulation and water mass exchange is likely associated with the downwelling eastward-propagating Kelvin waves induced by the semiannual westerly component in the equatorial Indian Ocean during intermonsoon seasons.

A comparative study of the land-atmosphere energy and water exchanges over the Tibetan Plateau and the Yangtze River Region

正确认识不同区域能量和水分循环特征是研究局地地气相互作用及准确预测区域天气,气候变化的关键.为了研究属于干旱/半干旱气候的青藏高原(TP)和湿润/半湿润气候的长江流域(YRR)之间地表能量和水分交换的异同,本文对比分析了两个区域8个不同地表类型(包括高山荒漠,高山草地,(平原)城市和(平原)草地等)观测站点的地表辐射和能量通量数据.结果显示:(1)TP由于高原大气层稀薄且空气洁净,年平均入射短波辐射为251.3W m^(-2),是YRR的1.7倍.加之高原地表反照率高导致反射辐射(59.6 W m^(-2))是YRR的2.87倍.入射及出射的长波辐射为231.5和338.0 W m^(-2),分别为YRR的0.64和0.83.而两个区域的净辐射差异不大;(2)草地站更多的潜热释放使得地表总加热效率高于城市和高山荒漠,TP和YRR的草地站的年平均潜热分别为35.0和38.8 W m^(-2),而植被稀疏且土壤干燥的高山荒漠地区感热最大,年平均感热为42.1 W m^(-2);其次是城市下垫面,其年平均感热为37.7 W m^(-2).研究结果揭示了不同气候背景下典型下垫面地气相互作用特征,为地气相互作用过程深入分析奠定了基础.

Surface treatment to improve corrosion resistance of Al plate heat exchangers

The correlations between thermal and physical properties were studied through thermal conductivity measurements, hardness tests, salt spray tests (AASS) among the surface treatment samples named K20, K40 with thickness of 20, 40 μm respectively and raw sample named K00. In thermal conductivity measurements, there are little differences among the samples as K00, K20 and K40, they exhibit 153.39, 150.69 and 149.76 W/(m·K), respectively. According to hardness tests, K00, K20 and K40 exhibit 87.9, 259.7 and 344.8 in Vickers values. In the result of salt spray tests to examine the effects on corrosion resistance, K00, K20 and K40 exhibit the grade of 3?5, 2.0?9.8 and 10, respectively. The mutual relation of the above results was analyzed. It is found that the surface treatments do not affect the thermal conductivity of aluminum and result in the improvement of physical properties. As a result of the technology, the surface improvement of aluminum alloy specimen is achieved without thermal degradation. It validates the ability of the aluminum plate heat exchangers with surface treatment to enhance the corrosion resistance. Present work is performed as the first fundamental threshold in the process of aluminum plate heat exchangers development to check out its possibility, therefore the next step-experimental and numerical study of practical aluminum plate heat exchangers will be made.

Net water vapour exchange over a mixed needle and broad-leaved forest in Changbai Mountain during autumn

Water vapour and CO2 fluxes were measured by the eddy-covariance technique above a mixed needle and broad-leaved forest with affiliated meteorological measurements in Changbai Mountain as part of China's FLUX projects since late August in 2002. Net water vapour exchange and environmental control over the forest were examined from September 1 to October 31 in 2002. To quantify the seasonal dynamics, the transition period was separated into leafed, leaf falling and leafless stages according to the development of leaf area. The results showed that (a) seasonal variation of water vapour exchange was mainly controlled by net radiation (Rn) which could account for 78.5%, 63.4% and 56.6% for leafed, leaf falling and leafless stages, respectively, while other environmental factors' effects varied evidently; (b) magnitude of water vapour flux decreased remarkably during autumn and daily mean of water vapour exchange was 24.2 mg m-2 s-1 (100%), 14.8 mg m-2 s-1 (61.2%) and 10.3 mg m-2 s-1 (42.6%) for leafed, leaf falling and leafless stage, respectively; and (c) the budget of water vapour exchange during autumn was estimated to be 87.1 kg H2O m-2, with a mean of 1427.2 g H2O d-1' varying markedly from 3104.0 to 227.5 g H2O m-2d-1.

Development of Heat Transfer Coefficient and Friction Factor Correlations for Serrated Fins in Water Medium using CFD

Abstract： The most popularly used fin types in compact heat exchangers are the serrated fins, wavy fins, louvered fins and plain fins. Amongst these fin types the serrated fins assume lot of importance due to its enhanced thermo-hydraulic performance. Thermo-hydraulic design of CHEs （Compact heat exchangers） is strongly dependent upon the predicted/measured dimensionless performance （Colburnj factor and Fanning friction vs. Reynolds number） of heat transfer surfaces. This paper describes the numerical analysis to study the heat transfer coefficient and friction factor of Serrated fins in water medium. CFD （Computational fluid dynamics） methodology has been used to develop the single phase water heat transfer coefficient and friction factor correlations for serrated fins using ANSYS Fluent 14.5. The results are compared with previous air-cooled models and experimental results of water. The water cooled CFD analysis results shows that the Prandtl number has a large effect on the Nusselt number of the serrated fin geometry. Finally, the generalized correlations are developed for serrated fins taking all geometrical parameters into account. This numerical estimation can reduce the number of tests/experiments to a minimum for similar applications.

Experimental Study on Convective Heat Transfer in Tube-Side of Water Jacket-Tube Heat Exchanger by Electrohydrodynamics Effect

The electrohydrodynamics （EHD） enhancement of convection heat transfer of water in a jacket tube heat exchanger was studied through an experimental method in this paper. In the experiment,a DC high voltage electrode was set in the central tube-side of the heat exchanger,and the high voltage electrode in the tube-side was adjustable in the range of 0-40 kV. Five differ-ent combinations of heat transfer enhancement experiments were conducted under the different voltage and rate of flow. The results indicate that the maximal enhancement coefficient θ is 1.224 when the flow rate of tube-side inlet is 0.1 m3/h. It is proved that,for the work medium of water,the convective heat transfer can be enhanced by applying high electric field. The performance of EHD-enhanced is sensitive to the variation of flow rate,and in the same flow rate,there exist an optimized voltage in the EHD-enhanced process ra-ther than the monotonic positive-correlation relationship.

The causes and impacts for heat stress in spring maize during grain filling in the North China Plain--A review

High-temperature stress （HTS） at the grain-filling stage in spring maize （Zea mays L.） is the main obstacle to increasing productivity in the North China Plain （NCP）. To solve this problem, the physiological mechanisms of HTS, and its causes and impacts, must be understood. The HTS threshold of the duration and rate in grain filling, photosynthetic characteristics （e.g., the thermal stability of thylakoid membrane, chlorophyll and electron transfer, photosynthetic carbon assimilation）, water status （e.g., leaf water potential, turgor and leaf relative water content） and signal transduction in maize are reviewed. The HTS threshold for spring maize is highly desirable to be appraised to prevent damages by unfavorable temperatures during grain filling in this region. HTS has negative impacts on maize photosynthesis by damaging the stability of the thylakoid membrane structure and degrading chlorophyll, which reduces light energy absorption, transfer and photosynthetic carbon assimilation. In addition, photosynthesis can be deleteriously affected due to inhibited root growth under HTS in which plants decrease their water-absorbing capacity, leaf water potential, turgor, leaf relative water content, and stomatal conductance. Inhibited photosynthesis decrease the supply of photosynthates to the grain, leading to falling of kernel weight and even grain yield. However, maize does not respond passively to HTS. The plant transduces the abscisic acid （ABA） signal to express heat shock proteins （HSPs）, which are molecular chaperones that participate in protein refolding and degradation caused by HTS. HSPs stabilize target protein configurations and indirectly improve thylakoid membrane structure stability, light energy absorption and passing, electron transport, and fixed carbon assimilation, leading to improved photosynthesis. ABA also induces stomatal closure to maintain a good water status for photosynthesis. Based on understanding of such mechanisms, strategies for alleviating HTS at the grain-filling stage in spring maize are summarized. Eight strategies have the potential to improve the ability of spring maize to avoid or tolerate HTS in this study, e.g., adjusting sowing date to avoid HTS, breeding heat-tolerance varieties, and tillage methods, optimizing irrigation, heat acclimation, regulating chemicals, nutritional management, and planting geometric design to tolerate HTS. Based on the single technology breakthrough, a com- prehensive integrated technical system is needed to improve heat tolerance and increase the spring maize yield in the NCP.

Energy Efficient Air Conditioning System Using Geothermal Cooling-Solar Heating in Gujarat, India

It is well known that one unit of electrical energy saved is equal to more than two units produced. One way of economizing the power is utilization of energy efficient systems at all locations. In the present study, the air conditioning system is analysed and an innovative way is suggested. We use natural low temperature of shallow sub surface (1 - 3 m) of the earth—geothermal cooling system. It is known that majority of the households and the apartment complexes in India have two tanks for water storage. One is the underground water sump and the other is the overhead water tank. In our study, we use these two water storage systems for space cooling during summer and also for heating during winter. The main aim of our paper is air-conditioning of the space in an economic way to save electricity. It is based on a simple idea of transferring the low temperature from underground water sump to the room in the house using water as a mode of transport. Since India is a tropical country located at low latitude, most of the year, the air temperature is high and demands space cooling. However, for a couple of months during severe winter months (Dec.-Jan.) at Ahmedabad, heating of the space is required. For heating the space, we suggest to use the well-known solar water heater. Effective use of heat exchanger is shown through computation, modelling schemes and lab experiment. We recommend geothermal cooling for 10 months in a year and solar hot water system during 2 months of winter. It is observed that the ambient air temperature of 35°C - 40°C in the room can be brought down to 26°C without much consumption of electricity. In a similar manner, the room temperature at night (13°C) during winter in Ahmedabad can be increased to 27°C through circulation of water from solar water heater in the heat exchanger.

Comparison and Performance Analysis of Heat Storage Equipment in Solar Heating System

Solar heating system is widely used recently. Heat storage equipment is the guarantee for steady performance of solar heating system. A design of latent heat storage exchanger with submerged coil was introduced with the structure, working principle, and the main advantages. This heat exchanger was integrated into solar heating system as the heat storage equipment. Advantage comparison of the designed heat exchanger in solar heating system with hot water tank was carried out. The analysis results show that the latent heat storage exchanger is superior to hot water tank obviously. The heat exchanger performance parameters and variations of these parameters are got： （1） with the increase of phase change material （PCM） volume ratio, heat storage equipment volume ratio decreases; （2） heat storage efficiency has the same varying tendency with outdoor and air temperature; while the bigger PCM volume ratio is, the weaker the effect of outdoor air temperature on heat storage efficiency is; （3） heat storage capacity and heat storage efficiency increase together; when PCM volume ratio is big, heat storage efficiency is high and the system can begin operating effcienfly and quickly; （4） with the increase of heat storage capacity, life cyde operation cost （LCOC） of system increases gradually in high speed; but with the increase of PCM volume ratio, the difference between the two systems LCOCs becomes smaller and smaller; （5） the reasonable range of PCM volume ratio is 0.5 - 0.7. Temperature characteristic analysis shows that, with the filled PCM, heat storage medium temperature presents several segments at different time, under conditions of different heat storage capacity and different PCM state.

Study of Corrosion on Film Properties of High Strength Cu-Sn-Zr Alloys in Tap Water

Corrosion has been reported to occur in the copper tubes of heat ex-changers in multiple-circulation hot water supply systems. We have been investigating the applicability of high-strength Cu-0.65 mass% Sn-0.014 mass% Zr-0.020 mass% P alloy to counteract this corrosion. Immersion tests, electrochemical measurements, and field tests were performed. Excellent corrosion resistance of the alloy was established under conditions with flowing water due to the formation of composite films containing tin. The alloy is expected to be better than copper as a corrosion-resistant material for heat exchanger tubes.

不同进水方式对大型水体储热效率的影响

目的针对大型水体跨季节储热时间不匹配问题,分析不同进水方式对储热效率的影响,减少储热过程中的热量损失。方法利用CFD数值模拟软件建立水体储热的分析模型,研究水体储热过程中的热交换规律,以及单双进水口、水平间距、动态进水、流速等因素对水体储热效果的影响。结果进水总流量越小,内部水体温度分层越好;在相同的储热时间内,双进水口方式效率最佳,水体内部平均温度至少比单一进水和动态进水高出16.83%,储热效率分别提高了9.89%和16.14%;相比单一进水口,双进水口方式火用损失降低了21.97%;进水管之间距离越小,水体储热效率越高。结论进水方式对水体储热效率影响至关重要,进水管道越靠近中轴线,采用小流量、双开口的进水形式储热效率越好。

水-冰相变凝固换热与热泵耦合供热系统实验研究

针对河北山区农村水源不足、地源钻井成本高、太阳能不稳定、造价高、没有合适的热泵低温热源等问题,研发了水-冰相变换热器;利用水的相变潜热作为热泵的低温热源,设计了水-冰相变凝固换热与热泵耦合供热系统,搭建了实验平台,经测试平台运行稳定可靠。通过对实验数据进行分析计算,得到系统性能系数在2.87~3.42之间。研究结果可为解决河北山区农村供暖问题提供参考。

换热站并联水泵分布式优化控制

针对现有换热站并联水泵优化算法在集中式架构下控制适应性不足的问题,本文提出了一种改进的分布式并联水泵优化算法.首先,建立了并联水泵的分布式控制系统,并对该优化问题的数学模型进行描述,在目标函数中引入自适应非线性因子;然后,设计了改进的分布式果蝇优化算法,在该算法中每台水泵的控制器仅通过与邻居控制器交互信息即可完成并联水泵的优化;并且,在嗅觉搜索阶段,使用正弦余弦策略替代赋予个体距离与方向的随机策略;最后,以两个实际换热站中不同并联水泵系统为例对算法进行仿真验证,并基于仿真结果进行性能分析.结果表明,相较于传统算法,改进的分布式果蝇优化算法能得到更优的控制策略,有着收敛速度快、稳定性好和鲁棒性强的特点;并且该算法适用于不同系统的并联水泵优化问题,具有可扩展性.在实际工程验证中相较于集中式算法,该算法在总功率和计算时间上分别平均降低了5.47%和29.90%,因此,能够满足实际换热站中对并联水泵热负荷优化分配的需求.

还原磁化焙烧竖炉冷却系统研究

某氧化铁矿石属于难选铁矿石,磁化焙烧工艺是处理此类铁矿石最有效的方法之一。竖炉磁化焙烧工艺加工成本相对较高,其中竖炉冷却系统是竖炉加工成本的重要组成部分,通过对竖炉冷却系统冷却水速、水箱梁水垢、水箱梁冷却水量等方面的研究,探索高效、节能的竖炉冷却系统.

具有泡沫金属流场的燃料电池研究进展

泡沫金属是一种具有高孔隙率、高电导率、良好传热性和重量较轻等优点的新型多功能材料,在质子交换膜燃料电池(PEMFC)中嵌入泡沫金属作为流场的应用受到越来越多的关注。重点综述PEMFC流场的研究进展,探讨泡沫金属结构参数、流场设计和环境因素等对功率密度、气体分布、压降和水热管理等性能的影响。进一步讨论泡沫金属流场在PEMFC应用中所面临的腐蚀和水淹问题,以及具备耐腐蚀涂层泡沫金属的研究进展,为PEMFC泡沫金属流场的发展和优化提供有益的启示,以期推进泡沫金属在PEMFC中的应用。

装配式柔性墙体日光温室联合储热系统蓄放热特性

增设多蓄热介质联合主动蓄放热系统是解决装配式柔性墙体日光温室“重保温、轻蓄热”问题的有效方法,但当前对于“土壤-空气-水”多介质联合储热系统蓄放热特性和加温效果尚不明确,针对此问题,该研究以配备“空气源地中热交换-水源后墙循环换热”联合储热系统的装配式柔性墙体日光温室为研究对象,采用现场跟踪测试和能量转移测算,对联合储热系统各自和组合的蓄放热特性进行研究。结果表明,配有联合储热系统的装配式柔性墙体日光温室室内夜间最低空气温度维持在10℃以上,室内外最大温差达26.5℃。0~50 cm的土壤层是该温室主要蓄热介质,晴天土壤层蓄热量最高占总蓄热量的63.5%。地中热交换系统最高占土壤蓄热量的54.4%。水循环系统蓄热量可达424.04 MJ,最高占总蓄热量的45.1%,通过循环蓄热可将储水池内8 m3水的温度提高到35℃。连阴天时,通过引入蓄放热比指标,对联合储热系统的运行效果进行定量评价,发现水循环系统具有蓄放热速度快的特点,蓄放热比绝对值最高可达1.62,是当天土壤蓄放热的1.8倍。但从总量上看,土壤仍是连阴天主要放热来源,在北京地区联合蓄放热系统能够维持3个连阴天的热量需求。水循环系统平均性能系数(coefficient of performance,COP)为9.16,地中热交换系统平均COP为6.82,联合蓄放热系统综合COP为8.85,对比热泵,其节能率达60.26%。研究结果为联合储热系统蓄放热机理研究提供了理论依据。