Reducing Electrical Consumption in Stationary Long-Haul Trucks

On average, long-haul trucks in the U.S. use approximately 667 million gallons of fuel each year just for idling. This idling primarily facilitates climate control operations during driver rest periods. To mitigate this, our study explored ways to diminish the electrical consumption of climate control systems in class 8 trucks through innovative load reduction technologies. We utilized the CoolCalc software, developed by the National Renewable Energy Laboratory (NREL), which integrates heat transfer principles with extensive weather data from across the U.S. to mimic the environmental conditions trucks face year-round. The analysis of the CoolCalc simulations was performed using MATLAB. We assessed the impact of various technologies, including white paint, advanced curtains, and Thinsulate insulation on reducing electrical demand compared to standard conditions. Our findings indicate that trucks operating in the eastern U.S. could see electrical load reductions of up to 40%, while those in the western regions could achieve reductions as high as 55%. Such significant decreases in energy consumption mean that a 10 kWh battery system could sufficiently manage the HVAC needs of these trucks throughout the year without idling. Given that many long-haul trucks are equipped with battery systems of around 800 Ah (9.6 kWh), implementing these advanced technologies could substantially curtail the necessity for idling to power air conditioning systems.

Optimization of Electricity Purchase and Sales Strategies of Electricity Retailers under the Condition of Limited Clean Energy Consumption

In the process of my country’s energy transition,the clean energy of hydropower,wind power and photovoltaic power generation has ushered in great development,but due to the randomness and volatility of its output,it has caused a certain waste of clean energy power generation resources.Regarding the purchase and sale of electricity by electricity retailers under the condition of limited clean energy consumption,this paper establishes a quantitative model of clean energy restricted electricity fromthe perspective of power system supply and demand balance.Then it analyzes the source-charge dual uncertain factors in the electricity retailer purchasing and selling scenarios in the mid-to long-term electricity market and the day-ahead market.Through the multi-scenario analysis method,the uncertain clean energy consumption and the user’s power demand are combined to form the electricity retailer’s electricity purchase and sales scene,and the typical scene is obtained by using the hierarchical clustering algorithm.This paper establishes a electricity retailer’s risk decisionmodel for purchasing and selling electricity in themid-and long-term market and reduce-abandonment market,and takes the maximum profit expectation of the electricity retailer frompurchasing and selling electricity as the objective function.At the same time,in themediumand longterm electricity market and the day-ahead market,the electricity retailer’s purchase cost,electricity sales income,deviation assessment cost and electricity purchase and sale risk are considered.The molecular results show that electricity retailers can obtain considerable profits in the reduce-abandonment market by optimizing their own electricity purchase and sales strategies,on the premise of balancing profits and risks.

Energy Consumption Analysis and Optimization of Electric Submersible Pump System

Electric submersible pumps account for a considerable proportion in the development of the Bohai Oilfield. Improving the system efficiency of the electric submersible pump wells, ensuring that the units operate in the high-efficiency zone, is essential. Analysis shows that the efficiency of the electric submersible pump system depends on the wear and tear of each component of the submersible pump equipment, the setting of operational parameters, and more importantly, the production status and daily management level of the oil well. Therefore, improving the structural performance of the submersible pump product, optimizing the parameters setting of the oil well, strengthening daily management, establishing a scientific management system, and improving the production management process and system can effectively improve the production efficiency and economic benefits of the oil well, and further achieve the goal of energy saving and emission reduction. In addition, it is necessary to actively promote the concept and technology of energy saving and emission reduction, encourage oilfield enterprises to explore effective measures to reduce the energy consumption of the electric submersible pump system by strengthening the scientific management system, and achieve a green, low-carbon, and high-quality development of oilfield production to achieve the unity of economic benefits, social benefits, and environmental benefits. This article applies the above measures in the P oilfield to achieve energy optimization of submersible electric pump systems, reducing the daily power consumption of single well submersible electric pump systems by 371 kWh per day, increasing the submersible electric pump's lifespan by 200 days, generating considerable project benefits.

Mathematical Model of Electric Vehicle Power Consumption for Traveling and Air-Conditioning

In order to make maximum use of the EV （electric vehicle） battery, evaluating the remaining battery capacity and the power consumption is important. Evaluation method of the remaining battery capacity with accuracy has been proposed. Moreover, the evaluation method of the power consumption for traveling has been proposed. However, the power consumption for vehicle-mounted air-conditioner is 30%. It is necessary to calculate the power consumption for both traveling and air-conditioning. In this paper, the authors have constructed a mathematical model which calculates the EV power consumption for both traveling and air-conditioning. The calculated results of this model have been compared to actual traveling data. In addition, factors which have a impact on the EV power consumption have been studied. As a result, the EV power consumption is greately varied by slope resistance, acceleration resistance and required air-conditioning load. Moreover, it is clarified that the air-conditioner consumes approximately 25% to 50% of the total power consumption in a hot summer day. In addition, the acceleration and the air-conditioning load differ depending on each vehicle driver. Therefore, in order to evaluate the EV power consumption practically, it is necessary to reflect the characteristics of each vehicle driver.

Impact of summer office set air-conditioning temperature on energy consumption and thermal comfort

To explore the relationship between summer office set air-conditioning temperature and energy consumption related to air conditioning use to provide human thermal comfort,a comparison experiment was conducted in three similar offices at temperatures of 24,26 and 28 ℃ respectively. A thermal comfort questionnaire survey was conducted. It is demonstrated that air-conditioner energy consumption at the set temperature of 28 ℃ is 113% and 271% lower than at 26 ℃ and 24 ℃,respectively. A linear relationship exists between air-conditioner energy consumption and the indoor and outdoor temperature difference. When comfortably dressed,over 80% of research participants accept the set temperature of 28 ℃. The regression analysis leads to a neutral temperature of 26.2 ℃ and an acceptable temperature of 28.2 ℃ for over 80% of the research participants subjects,indicating that the current 26 ℃ set temperature for offices in summer,required by Chinese General Office of the State Council,can be increased to 28 ℃. Moreover,analysis of predicted mean vote(PMV) index shows that a set temperature of 27 ℃,not 26 ℃,is sufficiently comfortable for office staff wearing long-sleeve shirts,long pants and leather shoes.

Modelling the Impact and Effects of Climatic Variability on Electricity Energy Consumption in the Yendi Municipality of Ghana

One of the cherished assets of every economy is electricity since it has proven to be the major source of energy for industrialization. Developing economies like Ghana have suffered the downside of poor management of the already inadequate electrical energy at its disposal. This is as a result of limited research into factors that influences electricity energy consumption, most importantly, the effects of climatic variables on electricity energy consumption. This research work explores the causal connection between climatic variables and electricity energy consumption, and develops a Vector Auto Regression (VAR) model to determine the influence of the climatic variables in forecasting electricity energy consumption in Yendi Municipality in the northern region of Ghana. The climatic factors considered in this work are;Rainfall (Rain), maximum temperature (Tmax), Sunshine (Sun), Wind (wind) and Relative Humidity (RH). The Granger causality tests employed in this work revealed that aside from Relative Humidity, the end energy consumption is affected by the other four climatic factors under consideration. The impulse response was used to ascertain the active interaction among electricity energy consumption and the climatic variables. The impulse response of electricity energy consumption to the climatic variables indicates a maximum positive effect of Temperature and Sunshine on electricity energy consumption in March and September respectively. The VAR model was also used in forecasting future consumption of electricity energy. The results indicate excellent forecasts of electricity energy consumption for the first four months of 2019.

Does economic growth stimulate energy consumption?New evidence from national and regional levels in China

A detailed investigation of the nexus between economic growth and energy use is imperative for formulating sustainable development policies.In this study,we examine panel cointegration and causality relations among economic growth,energy use,capital stock,and labor in 30 Chinese provinces between 2000-2019.We conduct a comprehensive empirical analysis based on panel modeling and a neoclassical production function.The findings of the second-generation panel unit root and co-integration tests reveal that these variables have long term co-integration linkages.We then perform a panel cointegration estimation using the fully modified ordinary least squares technique and find that total energy consumption,electricity consumption,capital stock,and labor significantly influence economic growth at the national and regional levels in China.Moreover,the outcomes of the Dumitrescu-Hurlin causality test indicate the existence of a two-way causal nexus between economic output and total energy consumption at the national level,but only a causal link from GDP to total energy use in the eastern and central regions.Conversely,a causality from total energy use to economic output is identified in the western region.Finally,we provide policy implications for the sustainable development of both energy and the economy at the national and regional levels.

A comparative study of hybrid electric vehicle fuel consumption over diverse driving cycles

Environmental pollution and declining resources of fossil fuels in recent years,have increased demand for better fuel economy and less pollution for ground transportation.Among the alternative solutions provided by researchers in recent decades,hybrid electric vehicles consisted of an internal combustion engine and an electric motor have been considered as a promising solution in the short-term.In the present study,fuel economy characteristics of a parallel hybrid electric vehicle are investigated by using numerical simulation.The simulation methodology is based on a fast forward facing simulation model of a parallel hybrid and an internal combustion engine powertrains.The objective of this study is to present the main parameters which result in an optimum combination of hybrid powertrain components in order to obtain a better fuel economy of hybrid powertrains regarding different driven cycles and hybridization factors.Then,the fuel consumption of the parallel hybrid electric vehicles are compared considering various driven cycles and hybridization factors.The results showed that the better fuel economy of hybrid powertrains increases by decreasing average load of the test cycle and the point of the best fuel economy for a particular average load of the cycle moves towards higher hybridization factors when the average load of the test cycle is reduced.

Multi-objective comprehensive optimization of fuel consumption and emission for hybrid electric vehicles

Aiming to reduce fuel consumption and emissions of a dual-clutch hybrid electric vehicle during cold start, multiobjective optimization for fuel consumption and HC/CO emission from a TWC(three-way catalytic converter) outlet is presented in this paper. DP(dynamic programming) considering dual-state variables is proposed based on the Bellman optimality principle. Both the battery SOC(state of charge) and the temperature of TWC monolith are considered in the algorithm simultaneously. In this way the global optimal control strategy and the Pareto optimal solution of multi-objective function are derived. Simulation results show that the proposed method is able to promote the TWC light-off significantly by decreasing the engine's load and improving exhaust temperature from the outlet of the engine, in comparison with original DP considering the single battery SOC. Compared to the results achieved by rule-based control strategy, fuel economy and emission of TWC outlet for cold start are optimized comprehensively. Each indicator of Pareto solution set shows the significant improvement.

A Novel Method for the Application of the ECMS(Equivalent Consumption Minimization Strategy)to Reduce Hydrogen Consumption in Fuel Cell Hybrid Electric Vehicles

Fuel cell hybrid electric vehicles are currently being considered as ideal means to solve the energy crisis and global warming in today’s society.In this context,this paper proposes a method to solve the problem related to the dependence of the so-called optimal equivalent factor(determined in the framework of the equivalent consumption minimum strategy-ECMS)on the working conditions.The simulation results show that under typical conditions(some representative cities being considered),the proposed strategy can maintain the power balance;for different initial battery’s states of charge(SOC),after the SOC stabilizes,the fuel consumption is 5.25 L/100 km.

Sensitivity to electricity consumption in urban business and commercial area buildings according to climatic change

Recently, urban high temperature phenomenon has become a problem which results from human activities, the increase in energy consumption, and land-cover change in urban areas. As extremely hot weather caused by urban high temperature continues, demand for power is increased and results in the degradation of electricity reserves. The current trend in climate change, regardless of the summer and winter power demand, is likely to have much effect on the power demand. Thus, sensitivity to electricity consumption in urban areas due to climate change was researched. The results show that, 1） the basic unit of the sensitivity to electricity consumption in the target areas is 1.25-1.58W/（m2.℃）; 2） The maximum sensitivity is recorded at around 8：00 pm in the area crowded with commercial and business area. And in the business area, electricity consumption load is even from 9：00 am to 6：00 pm.

Electricity Consumption and Spillover Effects A Dynamic Panel Data Approach

The paper intends to analyze economic factors that influence electricity consumption in the OECD economies. A special interest in this context is given to spillover effects of trade on electricity consumption. For this purpose, a model is constructed that using a dynamic panel study approach. The model is estimated in a GMM framework in which a dynamic procedure is conducted along the balanced growth path for electricity consumption in each economy. In advance, the long run dynamic behavior of prices, GDP, and trade induced spillover variables is determined. In a further step, the short run dynamic mechanism is pursued by estimating the partial adjustment dynamic coefficient on the target level of electricity consumption. The analysis is conducted for industrial, as well as residential electricity consumption. Alternatively, the same procedure is estimated by the application of a fixed period model. The model provides a benchmark tool for electricity policy decisions and for electricity consumption projections.

An optimal energy management development for various configuration of plug-in and hybrid electric vehicle

Due to soaring fuel prices and environmental concerns, hybrid electric vehicle(HEV) technology attracts more attentions in last decade. Energy management system, configuration of HEV and traffic conditions are the main factors which affect HEV's fuel consumption, emission and performance. Therefore, optimal management of the energy components is a key element for the success of a HEV. An optimal energy management system is developed for HEV based on genetic algorithm. Then, different powertrain system component combinations effects are investigated in various driving cycles. HEV simulation results are compared for default rule-based, fuzzy and GA-fuzzy controllers by using ADVISOR. The results indicate the effectiveness of proposed optimal controller over real world driving cycles. Also, an optimal powertrain configuration to improve fuel consumption and emission efficiency is proposed for each driving condition. Finally, the effects of batteries in initial state of charge and hybridization factor are investigated on HEV performance to evaluate fuel consumption and emissions. Fuel consumption average reduction of about 14% is obtained for optimal configuration data in contrast to default configuration. Also results indicate that proposed controller has reduced emission of about 10% in various traffic conditions.

Estimate of China's energy carbon emissions peak and analysis on electric power carbon emissions

China＇s energy carbon emissions are projected to peak in 2030 with approximately 110% of its 2020 level under the following conditions： 1） China＇s gross primary energy consumption is 5 Gtce in 2020 and 6 Gtce in 2030; 2） coal＇s share of the energy consumption is 61% in 2020 and 55% in 2030; 3） non-fossil energy＇s share increases from 15% in 2020 to 20% in 2030; 4） through 2030, China＇s GDP grows at an average annual rate of 6%; 5） the annual energy consumption elasticity coefficient is 0.30 in average; and 6） the annual growth rate of energy consumption steadily reduces to within 1%. China＇s electricity generating capacity would be 1,990 GW, with 8,600 TW h of power generation output in 2020. Of that output 66% would be from coal, 5% from gas, and 29% from non-fossil energy. By 2030, electricity generating capacity would reach 3,170 GW with 11,900 TW h of power generation output. Of that output, 56% would be from coal, 6% from gas, and 37% from non-fossil energy. From 2020 to 2030, CO2 emissions from electric power would relatively fall by 0.2 Gt due to lower coal consumption, and rela- tively fall by nearly 0.3 Gt with the installation of more coal-fired cogeneration units. During 2020--2030, the portion of carbon emissions from electric power in China＇s energy consumption is projected to increase by 3.4 percentage points. Although the carbon emissions from electric power would keep increasing to 118% of the 2020 level in 2030, the electric power industry would continue to play a decisive role in achieving the goal of increase in non-fossil energy use. This study proposes countermeasures and recommendations to control carbon emissions peak, including energy system optimization, green-coal-fired electricity generation, and demand side management.

Energy Consumption Monitoring Analysis for Residential, Educational and Public Buildings

In the present article thermal and electrical energy consumptions for different types of buildings are analyzed. The latitude and longitude of the researched area are defined 59?00'N and 26?00'E. According to K?ppen climate classification the area is located in warm summer continental climate. The study consist 40 residential, 7 educational and 44 public buildings. Three years data for each building type among 2006-2011 was used. Several detailed energy balances are presented for apartment buildings. In addition the different ways of domestic hot water preparation are analyzed for apartment buildings. The school buildings average consumption values are represented in study. Also valuable information of measured electrical energy consumption balance for a new office building is presented. Finally there is included the energy consumption analysis of public buildings.

A Predictive Energy Management Strategies for Mining Dump Trucks

The plug-in hybrid vehicles(PHEV)technology can effectively address the issues of poor dynamics and higher energy consumption commonly found in traditional mining dump trucks.Meanwhile,plug-in hybrid electric trucks can achieve excellent fuel economy through efficient energy management strategies(EMS).Therefore,a series hybrid system is constructed based on a 100-ton mining dump truck in this paper.And inspired by the dynamic programming(DP)algorithm,a predictive equivalent consumption minimization strategy(P-ECMS)based on the DP optimization result is proposed.Based on the optimal control manifold and the SOC reference trajectory obtained by the DP algorithm,the P-ECMS strategy performs real-time stage parameter optimization to obtain the optimal equivalent factor(EF).Finally,applying the equivalent consumption minimization strategy(ECMS)realizes real-time control.The simulation results show that the equivalent fuel consumption of the P-ECMS strategy under the experimentally collected mining cycle conditions is 150.8 L/100 km,which is 10.9%less than that of the common CDCS strategy(169.3 L/100 km),and achieves 99.47%of the fuel saving effect of the DP strategy(150 L/100 km).

Optimal Scheduling Strategy for Energy Consumption Minimization of Hydro-Thermal Power Systems

A comparison analysis based method for computing the water consumption volume needed for electric energy production of optimal scheduling in hydro-thermal power systems is presented in this paper. The electric energy produced by hydroelectric plants and coal-fired plants is divided into 4 components: potential energy, kinetic energy, water-deep pressure energy and reservoir energy. A new and important concept, reservoir energy, is proposed, based on which is divided into a number of water bodies, for example 3 water bodies, and a reservoir is analyzed in a new way. This paper presents an optimal scheduling solution of elec-tric energy production of hydro-thermal power systems based on multi-factors analytic method, in which some important factors, such as load demand, reservoir in-flow, water consumption volume increment rate of hydroelectric plants or converted from coal-fired plants, and so on are given to model the objective function and the constraints. A study example with three simulation cases is carried out to illustrate flexibility, adapta-bility, applicability of the proposed method.

Experimental Study of Energy Consumption Variation in Recurring Driving Trips

With a growing consumer market of battery electric vehicles, customers＇ demand for technology and features is on the rise. The range and, to a certain extent, the range estimation will play a key factor in customers＇ purchase decisions. In order to guarantee a precise range estimation over the usage life of battery electric vehicles, a method is presented that combines adaptive filter algorithms with statistical approaches. The statistical approach uses recurring driving cycles over the lifetime in order to derive the aging status of the traction battery. It is implied that the variance of the energy usage of these driving cycles is within certain bounds. This fact should be proven by an experimental case study. The dataset used in this paper is open to the public.

Unit GDP Energy Consumption in 2006:Moving from Increase to Decline

On July 12, Xie Fuzhan, Commissioner of National Bureau of Statistics of China attended the press conference held by State Council Information Office, and delivered the report on China＇s national unit GDP energy consumption in 2006, presenting with major indicators of unit GDP energy consumption both at national and regional levels in the year 2006.

Influential Factors on Deicing Performance of Electrically Conductive Concrete Pavement

The deicing experiment of carbon fiber reinforced electrically conductive concrete （CFRC） slab was conducted in laboratory at first, then the deicing process of CFRC parement was analyzed by means of finite element method （FEM）. At last, based on the energy conservation law and the computing restdts of finite element method, the influential factors including the setting of electric heating layer, environmental temperature, the thickness of ice, material parameters, and deicing power on deicing performance and energy consumption were discussed.