Passive jamming is believed to have very good potential in countermeasure community.In this paper,a passive angular blinking jamming method based on electronically controlled corner reflectors is proposed.The amplitud...Passive jamming is believed to have very good potential in countermeasure community.In this paper,a passive angular blinking jamming method based on electronically controlled corner reflectors is proposed.The amplitude of the incident wave can be modulated by switching the corner reflector between the penetration state and the reflection state,and the ensemble of multiple corner reflectors with towing rope can result in complex angle decoying effects.Dependency of the decoying effect on corner reflectors’radar cross section and positions are analyzed and simulated.Results show that the angle measured by a monopulse radar can be significantly interfered by this method while the automatic tracking is employed.展开更多
In order to improve the underwater acoustic target strength of comer reflectors,according to the principle of acoustic impedance mismatch of the boundary layer,the method of using air cavity to increase the underwater...In order to improve the underwater acoustic target strength of comer reflectors,according to the principle of acoustic impedance mismatch of the boundary layer,the method of using air cavity to increase the underwater acoustic target strength of corner reflectors is proposed.The acoustic reflection coefficients of underwater air layer and single layer metal sheet are calculated and compared.The results show that the reflection coefficient of single layer metal sheet is greatly affected by frequency and incidence angle,and the reflection coefficient of air layer in water is large and little affected by frequency and incidence angle.On this basis,a new kind of airfilled cavity corner reflector is designed.The acoustic scattering characteristics of underwater airfilled cavity comer reflector are calculated cumulatively,and the results are compared with the monolayer metal sheet corner reflector.The simulation results show that the acoustic reflection effect of the airfilled cavity corner reflector is better.In order to verify the correctness of the method,the test was carried out in the silencing tank.The experimental results show that the simulation results are in good agreement with the experimental results,and the airfilled cavity can improve on acoustic reflection performance of the underwater corner reflector.展开更多
角反射器形成的强假目标干扰给反舰导弹雷达导引头目标识别带来了严峻的挑战。为提高反舰导弹雷达导引头抗冲淡式角反射器干扰能力,提出一种基于极化与高分辨距离像(high resolution range profile,HRRP)多特征融合的角反射器鉴别方法...角反射器形成的强假目标干扰给反舰导弹雷达导引头目标识别带来了严峻的挑战。为提高反舰导弹雷达导引头抗冲淡式角反射器干扰能力,提出一种基于极化与高分辨距离像(high resolution range profile,HRRP)多特征融合的角反射器鉴别方法。结合3种场景下的实验数据,首先从海杂波中提取雷达导引头目标回波信号;其次,分析了角反和舰船回波的峰值个数、径向尺寸等5个距离像特征,以及极化相关系数均值等3个极化特征。实验数据处理结果表明,舰船与单个角反特征差异明显,与阵列角反特征差异减小;然后利用支持向量机(support vector machine,SVM)方法,基于实验数据设计5组测试,分别检验了单特征和多特征融合的鉴别性能。测试结果表明,单特征鉴别方法性能不稳定,而所提出的三特征融合鉴别方法更具稳健性,在5组测试中鉴别准确率均达到92.86%以上。展开更多
In this study,Differential Interferometric Synthetic Aperture Radar Interferometry(DInSAR)of artificial Corner Reflectors(CRs)were validated in the area of fast and nonlinear deformation gradient caused by active coal...In this study,Differential Interferometric Synthetic Aperture Radar Interferometry(DInSAR)of artificial Corner Reflectors(CRs)were validated in the area of fast and nonlinear deformation gradient caused by active coal longwall exploitation.Three Sentinel-1 datasets were processed using conventional DInSAR,Persistent Scatterer Interferometry(PSI),and Small BAseline Subset methods implemented in ENVI SARscape™.For evaluation,leveling and Global Navigation Satellite System(GNSS)measurements were used.Considering the challenge of snow cover,the removal of all winter images was not a successful strategy due to the long temporal baseline and strong movement,which cause phase unwrapping problems and underestimate the real deformation.The results indicate that only conventional DInSAR and SBAS with low network redundancy allow us to capture maximal deformation gradient and the root mean square error calculated between the CRs and the ground truth is on the level of 2–3 cm for the vertical and easting deformation component,respectively.For the small deformation gradient represented by the permanent GNSS station(4 cm/year),all SBAS techniques appeared to be more accurate than DInSAR,which corresponds to higher redundancy and better removal of the atmospheric signal.In contrast,DInSAR results allowed to capture information about two subsidence basins,which was not possible with SBAS and PSI approaches.展开更多
The high resolution Terra SAR-X dataset was employed with DIn SAR and persistent scatterer interferometry（PSI） technique for subsidence monitoring in a mountainous area. For DInS AR technique, the generally used SRT...The high resolution Terra SAR-X dataset was employed with DIn SAR and persistent scatterer interferometry（PSI） technique for subsidence monitoring in a mountainous area. For DInS AR technique, the generally used SRTM and relief-DEM, which was derived from aerial topographic map, were used to evaluate the influence of external DEM. The results show that SRTM could not fully compensate the complex topography of the research area. The corner reflectors installed during the acquisition of SAR dataset were used to estimate the accuracy of geocoding. The terrain corrected geocoding results based on relief-DEM were much better than using SRTM, with the root mean square error（RMSE） being 6.35 m in X direction and 11.65 m in Y direction（both in UTM projection）, around one pixel of the multilooked intensity image to be geocoded. For PSI technique, the results from time-series analysis of multi-baseline differential interferograms were integrated to restrict only persistent scatterer candidates near the boundary of subsiding area for regression analysis. The results demonstrate that PSI can refine the boundary of subsidence, which could then be used to derive some angular parameters to help people to learn the law of subsidence caused by repeated excavation in this area.展开更多
基金supported by the Equipment Pre-research Project(GK202002A020068)。
文摘Passive jamming is believed to have very good potential in countermeasure community.In this paper,a passive angular blinking jamming method based on electronically controlled corner reflectors is proposed.The amplitude of the incident wave can be modulated by switching the corner reflector between the penetration state and the reflection state,and the ensemble of multiple corner reflectors with towing rope can result in complex angle decoying effects.Dependency of the decoying effect on corner reflectors’radar cross section and positions are analyzed and simulated.Results show that the angle measured by a monopulse radar can be significantly interfered by this method while the automatic tracking is employed.
文摘In order to improve the underwater acoustic target strength of comer reflectors,according to the principle of acoustic impedance mismatch of the boundary layer,the method of using air cavity to increase the underwater acoustic target strength of corner reflectors is proposed.The acoustic reflection coefficients of underwater air layer and single layer metal sheet are calculated and compared.The results show that the reflection coefficient of single layer metal sheet is greatly affected by frequency and incidence angle,and the reflection coefficient of air layer in water is large and little affected by frequency and incidence angle.On this basis,a new kind of airfilled cavity corner reflector is designed.The acoustic scattering characteristics of underwater airfilled cavity comer reflector are calculated cumulatively,and the results are compared with the monolayer metal sheet corner reflector.The simulation results show that the acoustic reflection effect of the airfilled cavity corner reflector is better.In order to verify the correctness of the method,the test was carried out in the silencing tank.The experimental results show that the simulation results are in good agreement with the experimental results,and the airfilled cavity can improve on acoustic reflection performance of the underwater corner reflector.
基金The research infrastructure that has been used for computation purposes was created within the project EPOS-PL(POIR.04.02.00-14-A003/16)EPOS-PL+(POIR.04.02.00-00-C005/19-00)European Plate Observing System,funded by the Operational Programme Smart Growth 2014-2020,Priority IV:Increasing the research potential,Action 4.2:Development of modern research infrastructure of the science sector and co-financed by the European Regional Development Fund.
文摘In this study,Differential Interferometric Synthetic Aperture Radar Interferometry(DInSAR)of artificial Corner Reflectors(CRs)were validated in the area of fast and nonlinear deformation gradient caused by active coal longwall exploitation.Three Sentinel-1 datasets were processed using conventional DInSAR,Persistent Scatterer Interferometry(PSI),and Small BAseline Subset methods implemented in ENVI SARscape™.For evaluation,leveling and Global Navigation Satellite System(GNSS)measurements were used.Considering the challenge of snow cover,the removal of all winter images was not a successful strategy due to the long temporal baseline and strong movement,which cause phase unwrapping problems and underestimate the real deformation.The results indicate that only conventional DInSAR and SBAS with low network redundancy allow us to capture maximal deformation gradient and the root mean square error calculated between the CRs and the ground truth is on the level of 2–3 cm for the vertical and easting deformation component,respectively.For the small deformation gradient represented by the permanent GNSS station(4 cm/year),all SBAS techniques appeared to be more accurate than DInSAR,which corresponds to higher redundancy and better removal of the atmospheric signal.In contrast,DInSAR results allowed to capture information about two subsidence basins,which was not possible with SBAS and PSI approaches.
基金Project(51174191)supported by the National Natural Science Foundation of ChinaProject(2013CB227904)supported by the National Basic Research Program of ChinaProject(2012QNB09)supported by Fundamental Research Funds for the Central Universities,China
文摘The high resolution Terra SAR-X dataset was employed with DIn SAR and persistent scatterer interferometry（PSI） technique for subsidence monitoring in a mountainous area. For DInS AR technique, the generally used SRTM and relief-DEM, which was derived from aerial topographic map, were used to evaluate the influence of external DEM. The results show that SRTM could not fully compensate the complex topography of the research area. The corner reflectors installed during the acquisition of SAR dataset were used to estimate the accuracy of geocoding. The terrain corrected geocoding results based on relief-DEM were much better than using SRTM, with the root mean square error（RMSE） being 6.35 m in X direction and 11.65 m in Y direction（both in UTM projection）, around one pixel of the multilooked intensity image to be geocoded. For PSI technique, the results from time-series analysis of multi-baseline differential interferograms were integrated to restrict only persistent scatterer candidates near the boundary of subsiding area for regression analysis. The results demonstrate that PSI can refine the boundary of subsidence, which could then be used to derive some angular parameters to help people to learn the law of subsidence caused by repeated excavation in this area.
