Aim To calculate and analyze the near field distribution of ariborne short wave antenna. Methods B-spline method was used to get the mathermatital model of a Boeing 707320Baircraft and simulate its short wave antenna ...Aim To calculate and analyze the near field distribution of ariborne short wave antenna. Methods B-spline method was used to get the mathermatital model of a Boeing 707320Baircraft and simulate its short wave antenna . FDTD (finite-difference time-domain) method are ed tO complete the calculation and analysis. Results The near field distributions on aircraft's surface were obtained, the curve and gray figures of the normalized near field value were shown. Conclusion These modeling and calculating methods can provide data foraircraft's EMC analysis and design.展开更多
The radiation fields of the Archimedean spiral antenna are derived by approximating the spiral with a series of semicircles. The computational formulae for calculating the radiation fields of the airborne spiral anten...The radiation fields of the Archimedean spiral antenna are derived by approximating the spiral with a series of semicircles. The computational formulae for calculating the radiation fields of the airborne spiral antennas are developed by using geometrical theory of diffraction (GTD). The calculated results are in good agreement with the experimental ones.展开更多
This paper presents the design of a compact bow-tie antenna with triple band notched characteristics for UWB applications. The proposed antenna can operate from 3.1 to 10.6 GHz with VSWR -...This paper presents the design of a compact bow-tie antenna with triple band notched characteristics for UWB applications. The proposed antenna can operate from 3.1 to 10.6 GHz with VSWR - 8.4 GHz) centered at 8.1 GHz, the CSRR2 rejects the WLAN band (5.15 - 5.85 GHz) centered at 5.6 GHz, and the CSRR3 rejects the band (4.10 - 4.47 GHz) centered at 4.32 GHz. Compared with recent design, this antenna is more compact, and presents better simulation results of its characteristics. Our newly designed antenna is a potential candidate for application in UWB communication systems.展开更多
In this paper two proposed methods of input impedance calculation for Bow-Tie antenna are introduced. The proposed methods show input impedance calculation with high accuracy. Also, design curves for input impedance v...In this paper two proposed methods of input impedance calculation for Bow-Tie antenna are introduced. The proposed methods show input impedance calculation with high accuracy. Also, design curves for input impedance values were developed depending on the geometry of antenna. The proposed design curves are used to design a Bow-Tie type RFID tag antenna. The input impedance of the tag antenna is calculated using proposed methods and compared with that obtained using CST studio suite 2014 and IE3D Zeland version 12.0 software packages. The results are investigated and discussed. The tag antenna is fabricated, measured and the obtained input impedance is compared with the simulation and the proposed methods. Good agreement among measured input impedance and that simulated by CST, IE3D or proposed methods is obtained.展开更多
The studies on clutter modeling and suppression of airborne radar with a parabolic conformal array are uncommon due to the complexity of this type of antenna array configuration.The correct understanding of clutter ch...The studies on clutter modeling and suppression of airborne radar with a parabolic conformal array are uncommon due to the complexity of this type of antenna array configuration.The correct understanding of clutter characteristics for airborne radar with a parabolic conformal antenna array is the prerequisite and foundation of optimal suppression of this type of clutter.This paper establishes the model of clutter echo of airborne parabolic conformal phased array radar and analyzes the structure characteristics and the distribution features of this type of clutter.The simulation results show that this type of clutter has the following characteristics：1） The main lobe on the azimuth is seriously broadened,2） the power spectrum presents strong heterogeneity,and 3） the freedom degrees are high.Based on the existing related clutter suppression methods,we verified the correctness of the constructed clutter model.This work has an important guidance to further study on clutter suppression methods in airborne parabolic conformal array radar.展开更多
In this paper,the near-field vector components were used to combine the FEM method and the uniform-geometrical theory of diffraction(UTD)method for analyzing phased array antenna mounted on an airborne platform.First,...In this paper,the near-field vector components were used to combine the FEM method and the uniform-geometrical theory of diffraction(UTD)method for analyzing phased array antenna mounted on an airborne platform.First,HFSS,a set of software based on finite element method(FEM),was utilized to find the near-field vector components of the phased array antennas,and then these vector components were used as the source of the UTD method to get the disturbed radiation pattern.Numerical results show that the hybrid of the two methods not only extends the use of the UTD program,but also effectively solves this type of challenging problems.展开更多
文摘Aim To calculate and analyze the near field distribution of ariborne short wave antenna. Methods B-spline method was used to get the mathermatital model of a Boeing 707320Baircraft and simulate its short wave antenna . FDTD (finite-difference time-domain) method are ed tO complete the calculation and analysis. Results The near field distributions on aircraft's surface were obtained, the curve and gray figures of the normalized near field value were shown. Conclusion These modeling and calculating methods can provide data foraircraft's EMC analysis and design.
文摘The radiation fields of the Archimedean spiral antenna are derived by approximating the spiral with a series of semicircles. The computational formulae for calculating the radiation fields of the airborne spiral antennas are developed by using geometrical theory of diffraction (GTD). The calculated results are in good agreement with the experimental ones.
文摘This paper presents the design of a compact bow-tie antenna with triple band notched characteristics for UWB applications. The proposed antenna can operate from 3.1 to 10.6 GHz with VSWR - 8.4 GHz) centered at 8.1 GHz, the CSRR2 rejects the WLAN band (5.15 - 5.85 GHz) centered at 5.6 GHz, and the CSRR3 rejects the band (4.10 - 4.47 GHz) centered at 4.32 GHz. Compared with recent design, this antenna is more compact, and presents better simulation results of its characteristics. Our newly designed antenna is a potential candidate for application in UWB communication systems.
文摘In this paper two proposed methods of input impedance calculation for Bow-Tie antenna are introduced. The proposed methods show input impedance calculation with high accuracy. Also, design curves for input impedance values were developed depending on the geometry of antenna. The proposed design curves are used to design a Bow-Tie type RFID tag antenna. The input impedance of the tag antenna is calculated using proposed methods and compared with that obtained using CST studio suite 2014 and IE3D Zeland version 12.0 software packages. The results are investigated and discussed. The tag antenna is fabricated, measured and the obtained input impedance is compared with the simulation and the proposed methods. Good agreement among measured input impedance and that simulated by CST, IE3D or proposed methods is obtained.
基金supported by the Aeronautical Science Foundation of China under Grant No.20142080011
文摘The studies on clutter modeling and suppression of airborne radar with a parabolic conformal array are uncommon due to the complexity of this type of antenna array configuration.The correct understanding of clutter characteristics for airborne radar with a parabolic conformal antenna array is the prerequisite and foundation of optimal suppression of this type of clutter.This paper establishes the model of clutter echo of airborne parabolic conformal phased array radar and analyzes the structure characteristics and the distribution features of this type of clutter.The simulation results show that this type of clutter has the following characteristics：1） The main lobe on the azimuth is seriously broadened,2） the power spectrum presents strong heterogeneity,and 3） the freedom degrees are high.Based on the existing related clutter suppression methods,we verified the correctness of the constructed clutter model.This work has an important guidance to further study on clutter suppression methods in airborne parabolic conformal array radar.
文摘In this paper,the near-field vector components were used to combine the FEM method and the uniform-geometrical theory of diffraction(UTD)method for analyzing phased array antenna mounted on an airborne platform.First,HFSS,a set of software based on finite element method(FEM),was utilized to find the near-field vector components of the phased array antennas,and then these vector components were used as the source of the UTD method to get the disturbed radiation pattern.Numerical results show that the hybrid of the two methods not only extends the use of the UTD program,but also effectively solves this type of challenging problems.
