Fuzzy Risk Assessment Method for Airborne Network Security Based on AHP-TOPSIS

With the exponential increase in information security risks,ensuring the safety of aircraft heavily relies on the accurate performance of risk assessment.However,experts possess a limited understanding of fundamental security elements,such as assets,threats,and vulnerabilities,due to the confidentiality of airborne networks,resulting in cognitive uncertainty.Therefore,the Pythagorean fuzzy Analytic Hierarchy Process(AHP)Technique for Order Preference by Similarity to an Ideal Solution(TOPSIS)is proposed to address the expert cognitive uncertainty during information security risk assessment for airborne networks.First,Pythagorean fuzzy AHP is employed to construct an index system and quantify the pairwise comparison matrix for determining the index weights,which is used to solve the expert cognitive uncertainty in the process of evaluating the index system weight of airborne networks.Second,Pythagorean fuzzy the TOPSIS to an Ideal Solution is utilized to assess the risk prioritization of airborne networks using the Pythagorean fuzzy weighted distance measure,which is used to address the cognitive uncertainty in the evaluation process of various indicators in airborne network threat scenarios.Finally,a comparative analysis was conducted.The proposed method demonstrated the highest Kendall coordination coefficient of 0.952.This finding indicates superior consistency and confirms the efficacy of the method in addressing expert cognition during information security risk assessment for airborne networks.

METHOD FOR ALONG-TRACK DUAL-ANTENNA AIRBORNE RADAR'S GMTI WHEN THE ATENNA ERROR CHANGES PULSE TO PULSE

This paper presents a joint method of Doppler Beam Sharpen (DBS) imaging and Signal Subspace Processing (SSP) to achieve Ground Moving Target Indication(GMTI) for along- track dual-antenna airborne radar. When the error of the two antennas (also refers to channels) changes pulse to pulse, the method SSP is used to precisely calibrate the two antennas’ DBS images, then to detect the ground moving targets in the difference image of the two calibrated images. The method DBS-SSP is proved to offer performance improvement on the actually measured data and simulated data.

PC-based artif icial neural network inversion for airborne time-domain electromagnetic data

Traditionally, airborne time-domain electromagnetic （ATEM） data are inverted to derive the earth model by iteration. However, the data are often highly correlated among channels and consequently cause ill-posed and over-determined problems in the inversion. The correlation complicates the mapping relation between the ATEM data and the earth parameters and thus increases the inversion complexity. To obviate this, we adopt principal component analysis to transform ATEM data into orthogonal principal components （PCs） to reduce the correlations and the data dimensionality and simultaneously suppress the unrelated noise. In this paper, we use an artificial neural network （ANN） to approach the PCs mapping relation with the earth model parameters, avoiding the calculation of Jacobian derivatives. The PC-based ANN algorithm is applied to synthetic data for layered models compared with data-based ANN for airborne time-domain electromagnetic inversion. The results demonstrate the PC-based ANN advantages of simpler network structure, less training steps, and better inversion results over data-based ANN, especially for contaminated data. Furthermore, the PC-based ANN algorithm effectiveness is examined by the inversion of the pseudo 2D model and comparison with data-based ANN and Zhody＇s methods. The results indicate that PC-based ANN inversion can achieve a better agreement with the true model and also proved that PC-based ANN is feasible to invert large ATEM datasets.

Calculation and Analysis of Near Field of Airborne Short Wave Antenna

Aim To calculate and analyze the near field distribution of ariborne short wave antenna. Methods B-spline method was used to get the mathermatital model of a Boeing 707320Baircraft and simulate its short wave antenna . FDTD (finite-difference time-domain) method are ed tO complete the calculation and analysis. Results The near field distributions on aircraft's surface were obtained, the curve and gray figures of the normalized near field value were shown. Conclusion These modeling and calculating methods can provide data foraircraft's EMC analysis and design.

Three-dimensional arbitrarily anisotropic modeling for time-domain airborne electromagnetic surveys

Electrically anisotropic strata are abundant in nature, so their study can help our data interpretation and our understanding of the processes of geodynamics. However, current data processing generally assumes isotropic conditions when surveying anisotropic structures, which may cause discrepancies between reality and electromagnetic data interpretation. Moreover, the anisotropic interpretation of the time-domain airborne electromagnetic （TDAEM） method is still confined to one dimensional （1D） cases, and the corresponding three-dimensional （3D） numerical simulations are still in development. In this study, we expanded the 3D TDAEM modeling of arbitrarily anisotropic media. First, through coordinate rotation of isotropic conductivity, we obtained the conductivity tensor of an arbitrary anisotropic rock. Next, we incorporated this into Maxwell＇s equations, using a regular hexahedral grid of vector finite elements to subdivide the solution area. A direct solver software package provided the solution for the sparse linear equations that resulted. Analytical solutions were used to verify the accuracy and feasibility of the algorithm. The proven model was then applied to analyze the effects of arbitrary anisotropy in 3D TDAEM via the distribution of responses and amplitude changes, which revealed that different anisotropy situations strongly affected the responses of TDAEM.

2.5D forward modeling and inversion of frequency-domain airborne electromagnetic data

Frequency-domain airborne electromagnetics is a proven geophysical exploration method.Presently,the interpretation is mainly based on resistivity-depth imaging and onedimensional layered inversion;nevertheless,it is difficult to obtain satisfactory results for two- or three-dimensional complex earth structures using 1D methods.3D forward modeling and inversion can be used but are hampered by computational limitations because of the large number of data.Thus,we developed a 2.5D frequency-domain airborne electromagnetic forward modeling and inversion algorithm.To eliminate the source singularities in the numerical simulations,we split the fields into primary and secondary fields.The primary fields are calculated using homogeneous or layered models with analytical solutions,and the secondary（scattered） fields are solved by the finite-element method.The linear system of equations is solved by using the large-scale sparse matrix parallel direct solver,which greatly improves the computational efficiency.The inversion algorithm was based on damping leastsquares and singular value decomposition and combined the pseudo forward modeling and reciprocity principle to compute the Jacobian matrix.Synthetic and field data were used to test the effectiveness of the proposed method.

Influence of environmental conditions on airborne infection risk in ward

In order to study the influence of parameters on airborne transmitted diseases in a hospital ward,a pollutant decay equation and a Wells-Riley model are adopted to study the relationship between the airborne infection risk and the parameters such as the ventilation rate,the number of susceptible persons and the volume of the ward.The results show that the airborne infection risk can be reduced by increasing the ventilation rate.For two wards with the same air change per hour（ACH）but different volumes,the ventilation rate in a large room is higher than that in a small one.The number of the infected persons in the ward increases with the increase in the susceptible persons when the ACH is a constant.Therefore,the ventilation rate in the ward is not only estimated by the ACH but also related to the volume of the ward and the number of the susceptible persons.

Development of analytical methods for polycyclic aromatic hydrocarbons (PAHs) in airborne particulates: A review

In the present work, the different sample collection, pretreatment and analytical methods for polycyclic aromatic hydrocarbons （PAHs） in airborne particulates is systematacially reviewed, and the applications of these pretreatment and analytical methods for PAHs are compared in detail. Some comments on the future expectation are also presented.

Effect and Prospect of Basic Geological Survey Based on Airborne Gravimetry in China

The airborne gravimetry was an important leap and innovation in the world＇s history of geophysical exploration. China＇s first test of the airborne gravity geological survey in the onshoreoffshore transitional area of the western and southern part of the Bohai Sea was successful and effective in geology. Based on the airborne gravity data, and combining previous ground gravity, seismic and drilling data etc., we carried out the geological interpretation by forward and inverse methods. The result shows that the airborne Bouguer gravity anomaly was clear, the fracture interpretation was reliable, and the inversion depth of the main geological interfaces was relatively accurate. This airborne gravity geological survey not only filled the exploring gaps in the onshore- offshore transitional area, and realized the geological and tectonic junction between the sea and the land, but also discovered four local gravity anomalies, 11 fractures and three sags or subsags, and so on. The good geological effect of airborne gravimetry not restricted by terrain condition shows that it can be served as a new geophysical method in the exploration of complex terrain physiognomy area such as mountain, jungle, desert, marsh, onshore-offshore transitional area and so on, and has an extensive application prospect in China in the future.

Introduction to the airborne marine surveillance platform and its application to water quality monitoring in China

China Marine Surveillance Force was equipped with modern aerial equipments for marine lawexecute with the advantage of functioning agilely at a large scale of surveillance coverage, providing powerful all-round safeguard, which is of benefit to the harmonious and sustainable development of coastal economy. Onboard the planes, three kinds of remote sensing sensors have been installed, including a marine airborne multi-spectrum scanner （MAMS）, an optical-electronic platform, and an airborne hyper-spectral system AISA＋. The specifications of remote sensing platforms were introduced briefly first, then examples of water quality monitoring by airborne remote sensing were presented, including the monitoring in coastal suspended material, oil-spill and abnormal warm water, etc.

Characteristic Verification and Parameter Optimization of Airbags Cushion System for Airborne Vehicle

Abstract： The major methods to investigate the airbags cushion system are experimental method, thermodynamic method and finite element method （FEM）. Airbags cushion systems are very complicated and very difficult to be investigated thoroughly by such methods For experimental method, it is nearly impossible to completely analyze and optimize the cushion characteristics of airbags of airborne vehicle because of charge issue, safety concern and time constraint. Thermodynamic method fails to take the non-linear effects of large airbag deformation and varied contact conditions into consideration. For finite element method, the FE model is usually complicated and the calculation takes tens of hours of CPU time. As a result, the optimization of the design based on a nonlinear model is very difficult by traditional iterative approach method. In this paper, a model based on FEM and control volume method is proposed to simulate landing cushion process of airborne vehicle with airbags cushion system in order to analyze and optimize the parameters in airbags cushion system. At first, the performance of airbags cushion system model is verified experimentally. In airdrop test, accelerometers are fixed in 4 test points distributed over engine mount, top, bottom and side armor plate of hull to obtain acceleration curves with time. The simulation results are obtained under the same conditions of the airdrop test and the simulation results agree very well with the experimental results, which indicate the established model is valid for further optimization. To optimize the parameters of airbags, equivalent response model based on Latin Hypercube DOE and radial basis function is employed instead of the complex finite element model. Then the optimal results based on equivalent response model are obtained using simulated annealing algorithm. After optimization, the maximal acceleration of airborne vehicle landing reduces 19.83%, while the energy absorption by airbags increases 7.85%. The performance of the airbags cushion system thus is largely improved through optimization, which indicates the proposed method has the capability of solving the parameter optimization problem of airbags cushion system for airborne vehicle.

Analysis of forest structural complexity using airborne LiDAR data and aerial photography in a mixed conifer–broadleaf forest in northern Japan

Determining forest structural complexity,i.e.,a measure of the number of different attributes of a forest and the relative abundance of each attribute,is important for forest management and conservation.In this study,we examined the structural complexity of mixed conifer–broadleaf forests by integrating multiple forest structural attributes derived from airborne Li DAR data and aerial photography.We sampled 76 plots from an unmanaged mixed conifer–broadleaf forest reserve in northern Japan.Plot-level metrics were computed for all plots using both field and remote sensing data to assess their ability to capture the vertical and horizontal variations of forest structure.A multivariate set of forest structural attributes that included three Li DAR metrics(95 th percentile canopy height,canopy density and surface area ratio) and one image metric(proportion of broadleaf cover),was used to classify forest structure into structural complexity classes.Our results revealed significant correlation between field and remote sensing metrics,indicating that these two sets of measurements captured similar patterns of structure in mixed conifer–broadleaf forests.Further,cluster analysis identified six forest structural complexity classes includingtwo low-complexity classes and four high-complexity classes that were distributed in different elevation ranges.In this study,we could reliably analyze the structural complexity of mixed conifer–broadleaf forests using a simple and easy to calculate set of forest structural attributes derived from airborne Li DAR data and high-resolution aerial photography.This study provides a good example of the use of airborne Li DAR data sets for wider purposes in forest ecology as well as in forest management.

Comprehensive characterization of indoor airborne bacterial profile

This is the first detailed characterization of the airborne bacterial profiles in indoor environments. Two restaurants were selected for this study. Fifteen genera of bacteria were isolated from each restaurant and identified by three different bacterial identification systems including MIDI, Biolog and Riboprinter. The dominant bacteria of both restaurants were Gram-positive bacteria in which Micrococcus and Bacillus species were the most abundant. Most bacteria identified were representative species of skin and respiratory tract of human, and soil. Although the bacterial levels in these two restaurants were below the limit of the Hong Kong Indoor Air Quality Objective （HKIAQO） Level 1 standard （i.e., 〈 500 cfu/m^3）, the majority of these bacteria were opportunistic pathogens. These results suggested that the identity of airborne bacteria should also be included in the IAQ to ensure there is a safety guideline for the public.

Space-time clutter model for airborne bistatic radar with non-Gaussian statistics

To validate the potential space-time adaptive processing （STAP） algorithms for airborne bistatic radar clutter suppression under nonstationary and non-Gaussian clutter environments, a statistically non-Gaussian, space-time clutter model in varying bistatic geometrical scenarios is presented. The inclusive effects of the model contain the range dependency of bistatic clutter spectrum and clutter power variation in range-angle cells. To capture them, a new approach to coordinate system conversion is initiated into formulating bistatic geometrical model, and the bistatic non-Gaussian amplitude clutter representation method based on a compound model is introduced. The veracity of the geometrical model is validated by using the bistatic configuration parameters of multi-channel airborne radar measurement （MCARM） experiment. And simulation results manifest that the proposed model can accurately shape the space-time clutter spectrum tied up with specific airborne bistatic radar scenario and can characterize the heterogeneity of clutter amplitude distribution in practical clutter environments.

Study of Residual Basin and Tectonolayering Based on Airborne Gravity and Magnetic Data

This paper takes the South Yellow Sea as an example to show a new method for comprehensive geological-geophysical research such as residual basin and tectonolayering using airborne gravity and magnetic data in China. Based on airborne gravity and magnetic data, by measuring and analyzing stratigraphic density and susceptibility, the depths to the pre-Sinian magnetic basement top, the pre-Jurassic top and the Cenozoic bottom, are obtained by forward and inverse methods constrained by seismic and drilling data; and furthermore, the residual thicknesses of the Sinian-Triassic, the Jurassic-Cretaceous and the Cenozoic are calculated. Based on airborne gravity and magnetic anomalies, the faults in the pre-Sinian magnetic basement, the Jurassic-Cretaceous and the Cenozoic are respectively interpreted by the qualitative and quantitative methods. On the basis of the above study, and combining regional important tectonic events, four tectonolayers are divided in the vertical succession in South Yellow Sea, namely the pre-Sinian magnetic basement, the Sinian-Triassic, the Jurassic-Cretaceous and the Cenozoic. The result shows that there are thick Cenozoic and Jurassic-Cretaceous strata and thin residual Sinian-Triassic strata in the Suzhong-Huangnan depression area, but there are thin or only sporadic Mesozoic-Cenozoic terrestrial strata and thick Sinian-Triassic marine strata reserved in Subei-Huangzhong uplift area and Sunan-Wunansha uplift area. The four tectonolayers are very different in structures as well as distributions in plane.

Study on Size Distributions of Airborne Particles by Aircraft Observation in Spring over Eastern Coastal Areas of China

The authors studied the size distributions of particles at an altitude of 2000 m by aircraft observation over eastern costal areas of China from Zhuhai, Guangdong to Dalian, Liaoning (0.47-30 μm, 57 channels, including number concentration distribution, surface area concentration distribution and mass concentration distribution). In these cities, the average daily concentrations of PM10 are very high. They are among the most heavily polluted cities in China. The main pollution sources are anthropogenic activities such as wood, coal and oil burning. The observed size distributions show a broad spectrum and unique multi-peak characteristics, indicating no significant impacts of individual sources from urban areas. These results are far different from the distribution type at ground level. It may reflect the comprehensive effect of the regional pollution characteristics. Monitoring results over big cities could to some extent reflect their pollution characteristics.

Airborne laser scanning of natural forests in New Zealand reveals the influences of wind on forest carbon

Background： Forests are a key component of the global carbon cycle, and research is needed into the effects of human-driven and natural processes on their carbon pools. Airborne laser scanning （ALS） produces detailed 3D maps of forest canopy structure from which aboveground carbon density can be estimated. Working with a ALS dataset collected over the 8049-km2 Wellington Region of New Zealand we create maps of indigenous forest carbon and evaluate the influence of wind by examining how carbon storage varies with aspect. Storms flowing from the west are a common cause of disturbance in this region, and we hypothesised that west-facing forests exposed to these winds would be shorter than those in sheltered east-facing sites. Methods： The aboveground carbon density of 31 forest inventory plots located within the ALS survey region were used to develop estimation models relating carbon density to ALS information. Power-law models using rasters of top-of-the-canopy height were compared with models using tree-level information extracted from the ALS dataset. A forest carbon map with spatial resolution of 25 m was generated from ALS maps of forest height and the estimation models. The map was used to evaluate the influences of wind on forests. Results： Power-law models were slightly less accurate than tree-centric models （RMSE 35% vs 32%） but were selected for map generation for computational efficiency. The carbon map comprised 4.5 million natural forest pixels within which canopy height had been measured by ALS, providing an unprecedented dataset with which to examine drivers of carbon density. Forests facing in the direction of westerly storms stored less carbon, as hypothesised. They had much greater above-ground carbon density for a given height than any of 14 tropical forests previously analysed by the same approach, and had exceptionally high basal areas for their height. We speculate that strong winds have kept forests short without impeding basal area growth. Conclusion： Simple estimation models based on top-of-the canopy height are almost as accurate as state-of-the-art tree-centric approaches, which require more computing power. High-resolution carbon maps produced by ALS provide powerful datasets for evaluating the environmental drivers of forest structure, such as wind.

Mapping tree canopies in urban environments using airborne laser scanning (ALS):a Vancouver case study

Background: The distribution of forest vegetation within urban environments is critically important as it influences urban environmental conditions and the energy exchange through the absorption of solar radiation and modulation of evapotranspiration. It also plays an important role filtering urban water systems and reducing storm water runoff.Methods: We investigate the capacity of ALS data to individually detect, map and characterize large(taller than15 m) trees within the City of Vancouver. Large trees are critical for the function and character of Vancouver’s urban forest. We used an object-based approach for individual tree detection and segmentation to determine tree locations(position of the stem), to delineate the shape of the crowns and to categorize the latter either as coniferous or deciduous.Results: Results indicate a detection rate of 76.6% for trees > 15 m with a positioning error of 2.11 m(stem location). Extracted tree heights possessed a RMSE of 2.60 m and a bias of-1.87 m, whereas crown diameter was derived with a RMSE of 3.85 m and a bias of-2.06 m. Missed trees are principally a result of undetected treetops occurring in dense, overlapping canopies with more accurate detection and delineation of trees in open areas.Conclusion: By identifying key structural trees across Vancouver’s urban forests, we can better understand their role in providing ecosystem goods and services for city residents.

Daily variations of airborne pollen in Beijing Olympic Park during August of three consecutive years and their relationships with meteorological factors

A three-year aeropalynological study was carried out in the month of August for each of the three years 2005, 2006 and 2007 in the Beijing Olympic Park. A total of 19550 pollen grains were counted （15057 grains in 2005, 2717 in 2006 and 1776 in 2007） for the following taxa： Gramineae, Chenopodiaceae, Humulus L., Artemisia L., Ambrosia L. and Pinus L. The analysis indicated that in the three consecutive years of 2005-007, airborne pollen types and daily number of pollen in August in the Beijing Olympic Park were closely related to environmental change and vegetation composition. The daily variations of airborne pollen displayed similar patterns in August in each of the three years, which were affected positively by periods of daily sunshine, negatively by daily relative humidity and daily precipitation. Continuously high daily temperatures and stable daily wind speeds seemed to have little effect on the fluctuation of airborne pollen.

Building Damage Extraction from Post-earthquake Airborne LiDAR Data

Building collapse is a significant cause of earthquake-related casualties; therefore, the rapid assessment of buildings damage is important for emergency management and rescue. Airborne light detection and ranging （LiDAR） can acquire point cloud data in combination with height values, which in turn provides detailed information on building damage. However, the most previous approaches have used optical images and LiDAR data, or pre- and post-earthquake LiDAR data, to derive building damage information. This study applied surface normal algorithms to extract the degree of building damage. In this method, the angle between the surface normal and zenith （0） is used to identify damaged parts of a building, while the ratio of the standard deviation to the mean absolute deviation （σ/δ） of θ is used to obtain the degree of building damage. Quantitative analysis of 85 individual buildings with different roof types （i.e., flat top or pitched roofs） was conducted, and the results confirm that post-earthquake single LiDAR data are not affected by roof shape. Furthermore, the results confirm that θ is correlated to building damage, and that σ/δ represents an effective index to identify the degree of building damage.