Airborne Microorganisms Present in the Atmosphere in Valladolid, Spain

Over the past few years, research on the quality of air and microorganisms present in the atmosphere and spore composition of the environment has increased significantly, due to concerns over health risks for humans, plants, and animals. This study shows the abundance and diversity of microorganisms and the atmosphere of an urban nucleus, that is, the city of Valladolid (Spain). We considered the conditions of precipitation, humidity and wind, and the presence of some atmospheric pollutants such as nitrogen dioxide and nitrogen monoxide (NO2/NO), carbon monoxide (CO), sulfur dioxide, and particulate matter (PM10 and PM2.5). After their deposition present at five geographic points with different environmental conditions, differences were observed in the proportion of bacteria growth which was characterized by growth in several specific culture media. Most identified the Gram-negative bacteria identified in the air samples collected belong to the genera Staphylococcus and Streptococcus. Gram-positive bacteria were present at a low rate.

Removal of airborne microorganisms emitted from a wastewater treatment oxidation ditch by adsorption on activated carbon

Bioaerosol emissions from wastewater and wastewater treatment processes are a significant subgroup of atmospheric aerosols. Most previous work has focused on the evaluation of their biological risks. In this study, however, the adsorption method was applied to reduce airborne microorganisms generated from a pilot scale wastewater treatment facility with oxidation ditch. Results showed adsorption on granule activated carbon （GAC） was an efficient method for the purification of airborne microorganisms. The GAC itself had a maximum adsorption capacity of 2217 CFU/g for airborne bacteria and 225 CFU/g for fungi with a flow rate of 1.50 m^3/hr. Over 85% of airborne bacteria and fungi emitted from the oxidation ditch were adsorbed within 80 hr of continuous operation mode. Most of them had a particle size of 0.65-4.7 μm. Those airborne microorganisms with small particle size were apt to be adsorbed. The SEM/EDAX, BET and Boehm＇s titration methods were applied to analyse the physicochemical characteristics of the GAC. Relationships between GAC surface characteristics and its adsorption performance demonstrated that porous structure, large surface area, and hydrophobicity rendered GAC an effective absorber of airborne microorganisms. Two regenerate methods, ultraviolet irradiation and high pressure vapor, were compared for the regeneration of used activated carbon. High pressure vapor was an effective technique as it totally destroyed the microorganisms adhered to the activated carbon. Microscopic observation was also carried out to investigate original and used adsorbents.

Advances in airborne microorganisms detection using biosensors:A critical review

Humanity has been facing the threat of a variety of ifectious diseases.Airborne microorganisms can cause airbome infectious diseases,which spread rapidly and extensively,causing huge losscs to human society on a global scale.In recent years,the detection technology for airbome microorganisms has developed rapidly;it can be roughly divided into biochemical,immune,and molecular technologies.However,these technologies still have some shortcomings;they are time consuming and have low sensitivity and poor stability.Most of them need to be used in the ideal environment of a laboratory,which limits their applications.A biosensor is a device that converts biological signals into detectable signals.As an interdisciplinary feld,biosensors have successfully introduced a variety of technologies for bio-detection.Given their fast analysis speed,high sensitivity good portability,strong specifcity,and low cost,biosensors have been widely uised in cnvironmental monitoring,medical research,food and agricultural safety,military.medicine and other fields.In recent years,the performance of biosensors has greatly improved,becoming.a promising techmology for airborne microorganism detection.This review introduces the detection principle of biosensors from the three aspects of component identification,energy conversion principle,and signal amplification.It also summarizes its research and application in airborne microorganism detection.The new progress and future development trend of the biosensor detection of airbormne microorganisms are analyzed.

Development of a New Sampling Medium for Bioaerosols

Objective To develop a new sampling medium for detecting of bioaerosols. Methods The sampling media were tested by using Escherichia coli, Staphylococcus aureus and Serratia marcescens under static and active conditions, preliminary applications were performed using AGI-10 and high volume sampler. Results The average recovery rates were raised to 24.7%, 58.2%, 40.5%, 44.1%, 20.5%, and 15.4%, respectively in six consecutive experiments under static condition for 60 min at room temperature. Four kinds of sampling media were singled out after static experiments, which were referred to as “samplutions” PD1, PX2, TD1, and TX2, respectively. Under the active condition, the protective efficacy of PD1, PX2, TD1, and TX2 was 226% (153/47), 553% (111/17), 150% (120/48), and 268% (419/114), respectively. Conclusion The samplutions have some effects on the subsequent nucleic acid detection, which could be avoided by employing standard nucleic acid extraction procedure. The newly developed samplution can be applied to the detection of bioaerosols.

Recent progress in online detection methods of bioaerosols

The aerosol transmission of coronavirus disease in 2019,along with the spread of other respiratory diseases,caused significant loss of life and property;it impressed upon us the importance of real-time bioaerosol detection.The complexity,diversity,and large spatiotemporal variability of bioaerosols and their external/internal mixing with abiotic components pose challenges for effective online bioaerosol monitoring.Traditional methods focus on directly capturing bioaerosols before subsequent time-consuming laboratory analysis such as culture-based methods,preventing the high-resolution time-based characteristics necessary for an online approach.Through a comprehensive literature assessment,this review highlights and discusses the most commonly used real-time bioaerosol monitoring techniques and the associated commercially available monitors.Methods applied in online bioaerosol monitoring,including adenosine triphosphate bioluminescence,laser/light-induced fluorescence spectroscopy,Raman spectroscopy,and bioaerosol mass spectrometry are summarized.The working principles,characteristics,sensitivities,and efficiencies of these real-time detection methods are compared to understand their responses to known particle types and to contrast their differences.Approaches developed to analyze the substantial data sets obtained by these instruments and to overcome the limitations of current real-time bioaerosol monitoring technologies are also introduced.Finally,an outlook is proposed for future instrumentation indicating a need for highly revolutionized bioaerosol detection technologies.