The formation of ice on the leading edge of aircraft engines is a serious issue,as it can have catastrophic consequences.The Swirl Anti-Icing(SAI)system,driven by ejection,circulates hot fluid within a 360°annula...The formation of ice on the leading edge of aircraft engines is a serious issue,as it can have catastrophic consequences.The Swirl Anti-Icing(SAI)system,driven by ejection,circulates hot fluid within a 360°annular chamber to heat the engine inlet lip surface and prevent icing.This study employs a validated Computational Fluid Dynamics(CFD)approach to study the impact of key geometric parameters of this system on flow and heat transfer characteristics within the anti-icing chamber.Additionally,the entropy generation rate and exergy efficiency are analyzed to assess the energy utilization in the system.The research findings indicate that,within the considered flow range,reducing the nozzle specific areaφfrom 0.03061 to 0.01083 can enhance the ejection coefficient by over 60.7%.This enhancement increases the air circulating rate,thereby intensifying convective heat transfer within the SAI chamber.However,the reduction inφalso leads to a significant increase in the required bleed air pressure and a higher entropy generation rate,indicating lower exergy efficiency.The nozzle angleθnotably affects the distribution of hot and cold spots on the lip surface of the SAI chamber.Increasingθfrom 0°to 20°reduces the maximum temperature difference on the anti-icing chamber surface by 60 K.展开更多
Pavement snow and icing are worldwide problems, but effective countermeasures are just beginning to be developed in China. The two most common snow and ice removal methods are mechanical clearance and chemical melting...Pavement snow and icing are worldwide problems, but effective countermeasures are just beginning to be developed in China. The two most common snow and ice removal methods are mechanical clearance and chemical melting, and the advantages and disadvantages of each approach are discussed here, including environmental and structural damage caused by corrosive snow melting agents. New developments in chemical melting agents and mechanical equipment are discussed, and an overview of alternative thermal melting systems is presented, including the use of geothermy and non-geothermal heating systems utilizing solar energy, electricity, conductive pavement materials, and infrared/microwave applications. Strategic recommendations are made for continued enhancement of public safety in snow and ice conditions.展开更多
An anti-icing surface has been designed and prepared with an aluminum panel by creating an artificial lotus leaf which is highly hydrophobic. The hydrophobicity of a solid surface can be generated by decreasing its su...An anti-icing surface has been designed and prepared with an aluminum panel by creating an artificial lotus leaf which is highly hydrophobic. The hydrophobicity of a solid surface can be generated by decreasing its surface tension and increasing the roughness of the surface. On a highly hydrophobic surface, water has a high contact angle and it can easily rolls off, carrying surface dirt and debris with it. Super-cooled water or freezing rain can also run off this highly hydrophobic surface instead of forming ice on the surface, due to the reduction of the liquid-solid adhesion. This property can also help a surface to get rid of the ice after the water becomes frozen. In this study, a Cassie-Baxter rough surface was modeled, and an aluminum panel was physically and chemically modified based on the modeled structure. Good agreement was found between predicted values and experimental results for the contact and roll-off angles of water. Most importantly, by creating this highly hydrophobic aluminum rough surface, the anti-icing and de-icing properties of the modified surface were drastically improved compared to the control aluminum surface, and the cost will be reduced.展开更多
This paper introduces an effective anti-icing strategy that uses passive anti-icing property and active de-icing functions concurrently.These dual capabilities can alleviate the icing problem more effectively than eit...This paper introduces an effective anti-icing strategy that uses passive anti-icing property and active de-icing functions concurrently.These dual capabilities can alleviate the icing problem more effectively than either a passive or active function alone.The developed material is a slippery liquid-repellent elastic conductor(SLEC);it is an organogel that is composed of multi-walled carbon nanotubes,oil,and polydimethylsiloxane.The SLEC maintains passive water-droplet sliding ability even on wet surfaces that frequently occur in cold conditions(e.g.,during condensation and defrosting),suppresses ice nucleation,and shows ice adhesion strength as low as^20 kPa.The SLEC releases heat when it is subject to electrical or photonic stimulation,and can therefore it can prevent ice formation and melt ice that has already formed on a surface.This material has sustainable liquid repellence by syneresis and replenishment;this ability ensures long-lasting anti-icing property,and results in exceptional durability.This durability is stable against mechanical damage.The superior dual anti-icing capabilities together with the sustainable and stable liquid repellence should generate synergistic effects,and yield a powerful anti-icing tool that can broaden the range of icing applications.展开更多
The impact of unstable supercooled water droplets suspended in the cloud on the solid will cause its surface to freeze,and the flight safety of the aircraft will be seriously affected when flying in this environment.A...The impact of unstable supercooled water droplets suspended in the cloud on the solid will cause its surface to freeze,and the flight safety of the aircraft will be seriously affected when flying in this environment.Aircraft icing protection system is an important device to reduce icing accidents and improve aircraft safety performance,which is of great significance to ensure flight safety.Based on the energy source,this paper proposes a general strategy for constructing an aircraft icing protection system,including Active Anti-icing and De-icing(AAD)system,Passive Antiicing and De-icing(PAD)system and Composite Anti-icing and De-icing(CAD)system.The principle,scope of application,advantages and disadvantages of aircraft anti-icing and de-icing technologies such as electric pulse de-icing,low-frequency piezoelectric de-icing,and hydrophobic material anti-icing are explored in detail,and the corresponding improvement measures are proposed.The future development of aircraft anti-icing and de-icing technology is prospected,and some new ideas are provided for the improvement of aircraft anti-icing and de-icing technology.展开更多
基金Shenyang Key Laboratory of Aircraft Icing and Ice Protection,Grant Number XFX20220303Education Department of Hunan Province,China,Grant Number 23A0504National Natural Science Foundation of China,Grant Number 52275108.
文摘The formation of ice on the leading edge of aircraft engines is a serious issue,as it can have catastrophic consequences.The Swirl Anti-Icing(SAI)system,driven by ejection,circulates hot fluid within a 360°annular chamber to heat the engine inlet lip surface and prevent icing.This study employs a validated Computational Fluid Dynamics(CFD)approach to study the impact of key geometric parameters of this system on flow and heat transfer characteristics within the anti-icing chamber.Additionally,the entropy generation rate and exergy efficiency are analyzed to assess the energy utilization in the system.The research findings indicate that,within the considered flow range,reducing the nozzle specific areaφfrom 0.03061 to 0.01083 can enhance the ejection coefficient by over 60.7%.This enhancement increases the air circulating rate,thereby intensifying convective heat transfer within the SAI chamber.However,the reduction inφalso leads to a significant increase in the required bleed air pressure and a higher entropy generation rate,indicating lower exergy efficiency.The nozzle angleθnotably affects the distribution of hot and cold spots on the lip surface of the SAI chamber.Increasingθfrom 0°to 20°reduces the maximum temperature difference on the anti-icing chamber surface by 60 K.
基金supported by the National Natural Science Fund of China(No.41121061)the National Key Basic Research and Development Program(No.2012CB026102)the Fund of the "Hundred People Plan" of CAS(to WenBing Yu)
文摘Pavement snow and icing are worldwide problems, but effective countermeasures are just beginning to be developed in China. The two most common snow and ice removal methods are mechanical clearance and chemical melting, and the advantages and disadvantages of each approach are discussed here, including environmental and structural damage caused by corrosive snow melting agents. New developments in chemical melting agents and mechanical equipment are discussed, and an overview of alternative thermal melting systems is presented, including the use of geothermy and non-geothermal heating systems utilizing solar energy, electricity, conductive pavement materials, and infrared/microwave applications. Strategic recommendations are made for continued enhancement of public safety in snow and ice conditions.
文摘An anti-icing surface has been designed and prepared with an aluminum panel by creating an artificial lotus leaf which is highly hydrophobic. The hydrophobicity of a solid surface can be generated by decreasing its surface tension and increasing the roughness of the surface. On a highly hydrophobic surface, water has a high contact angle and it can easily rolls off, carrying surface dirt and debris with it. Super-cooled water or freezing rain can also run off this highly hydrophobic surface instead of forming ice on the surface, due to the reduction of the liquid-solid adhesion. This property can also help a surface to get rid of the ice after the water becomes frozen. In this study, a Cassie-Baxter rough surface was modeled, and an aluminum panel was physically and chemically modified based on the modeled structure. Good agreement was found between predicted values and experimental results for the contact and roll-off angles of water. Most importantly, by creating this highly hydrophobic aluminum rough surface, the anti-icing and de-icing properties of the modified surface were drastically improved compared to the control aluminum surface, and the cost will be reduced.
文摘This paper introduces an effective anti-icing strategy that uses passive anti-icing property and active de-icing functions concurrently.These dual capabilities can alleviate the icing problem more effectively than either a passive or active function alone.The developed material is a slippery liquid-repellent elastic conductor(SLEC);it is an organogel that is composed of multi-walled carbon nanotubes,oil,and polydimethylsiloxane.The SLEC maintains passive water-droplet sliding ability even on wet surfaces that frequently occur in cold conditions(e.g.,during condensation and defrosting),suppresses ice nucleation,and shows ice adhesion strength as low as^20 kPa.The SLEC releases heat when it is subject to electrical or photonic stimulation,and can therefore it can prevent ice formation and melt ice that has already formed on a surface.This material has sustainable liquid repellence by syneresis and replenishment;this ability ensures long-lasting anti-icing property,and results in exceptional durability.This durability is stable against mechanical damage.The superior dual anti-icing capabilities together with the sustainable and stable liquid repellence should generate synergistic effects,and yield a powerful anti-icing tool that can broaden the range of icing applications.
基金the Open Fund of Key Laboratory of Power Research of China and the National Natural Science Foundation of China(No.2018YFC0809500)the Sichuan Science and Technology Plan Project,China(No.23NSFSC1923)+2 种基金the Laboratory of Icing and Anti/De-icing of CARDC,China(No.IADL20220406)the Key R&D Special Projects in Henan Province,China(No.221111321000)the Basic Scientific Research Business Expenses of Central Universities,China(No.J2023-033)。
文摘The impact of unstable supercooled water droplets suspended in the cloud on the solid will cause its surface to freeze,and the flight safety of the aircraft will be seriously affected when flying in this environment.Aircraft icing protection system is an important device to reduce icing accidents and improve aircraft safety performance,which is of great significance to ensure flight safety.Based on the energy source,this paper proposes a general strategy for constructing an aircraft icing protection system,including Active Anti-icing and De-icing(AAD)system,Passive Antiicing and De-icing(PAD)system and Composite Anti-icing and De-icing(CAD)system.The principle,scope of application,advantages and disadvantages of aircraft anti-icing and de-icing technologies such as electric pulse de-icing,low-frequency piezoelectric de-icing,and hydrophobic material anti-icing are explored in detail,and the corresponding improvement measures are proposed.The future development of aircraft anti-icing and de-icing technology is prospected,and some new ideas are provided for the improvement of aircraft anti-icing and de-icing technology.