Since flight accidents due to aircraft icing occur from time to time,this paper proposes an array of impact rod-type plasma synthetic jet de-icing methods for aircraft icing problems.The impact rod-type plasma synthet...Since flight accidents due to aircraft icing occur from time to time,this paper proposes an array of impact rod-type plasma synthetic jet de-icing methods for aircraft icing problems.The impact rod-type plasma synthetic jet actuator(PSJA)is based on the traditional PSJA with an additional impact rod structure for better de-icing in the flight environment.In this work,we first optimize the ice-breaking performance of a single-impact rod-type PSJA,and then conduct an array of impact rod-type plasma synthetic jet ice-breaking experiments to investigate the relationship between crack expansion and discharge energy,ice thickness and group spacing.The results show that the impact force and impulse of a single-impact rod-type PSJA are proportional to the discharge energy,and there exists a threshold energy Qmin for a single actuator to break the ice,which is proportional to the ice thickness.Only when the discharge energy reaches above Qmin can the ice layer produce cracks,and at the same time,the maximum radial crack length produced during the ice-breaking process is proportional to the discharge energy.When the ice is broken by an array of impact rod PSJAs,the discharge energy and group spacing together determine whether the crack can be extended to the middle region of the actuator.When the group spacing is certain,increasing the energy can increase the intersection of cracks in the middle region,and the ice-fragmentation degree is increased and the ice-breaking effect is better.At the same time,the energy estimation method of ice breaking by an array of impact rod-type PSJAs is proposed according to the law when a single actuator is breaking ice.展开更多
This paper investigates the homogeneity of United States aircraft reconnaissance data and the impact of these data on the homogeneity of the tropical cyclone(TC)best track data for the seasons 1949-1987 generated by t...This paper investigates the homogeneity of United States aircraft reconnaissance data and the impact of these data on the homogeneity of the tropical cyclone(TC)best track data for the seasons 1949-1987 generated by the China Meteorological Administration(CMA).The evaluation of the reconnaissance data shows that the minimum central sea level pressure(MCP)data are relatively homogeneous,whereas the maximum sustained wind(MSW)data show both overestimations and spurious abrupt changes.Statistical comparisons suggest that both the reconnaissance MCP and MSW were well incorporated into the CMA TC best track dataset.Although no spurious abrupt changes were evident in the reconnaissance-related best track MCP data,two spurious changepoints were identified in the remainder of the best-track MCP data.Furthermore,the influence of the reconnaissance MSWs seems to extend to the best track MSWs unrelated to reconnaissance,which might reflect the optimistic confidence in making higher estimates due to the overestimated extreme wind“observations”.In addition,the overestimation of either the reconnaissance MSWs or the best track MSWs was greater during the early decades compared to later decades,which reflects the important influence of reconnaissance data on the CMA TC best track dataset.The wind-pressure relationship(WPR)used in the CMA TC best track dataset is also evaluated and is found to overestimate the MSW,which may lead to inhomogeneity within the dataset between the aircraft reconnaissance era and the satellite era.展开更多
We have previously evaluated asbestos exposure associated with various maintenance procedures on light aircraft. The purpose of this study was to evaluate asbestos exposure during engine maintenance on light aircraft....We have previously evaluated asbestos exposure associated with various maintenance procedures on light aircraft. The purpose of this study was to evaluate asbestos exposure during engine maintenance on light aircraft. This test was designed to evaluate the potential for asbestos exposure to mechanics and others who remove asbestos-containing engine gaskets from reciprocating style aircraft engines. Utilized in this test was an air cooled, horizontally opposed, aviation gasoline burning engine, assembled during 1986 and operated intermittently up into 2015, having accumulated 1680 hours run time. Nearly 75% of the asbestos-containing gaskets installed during 1986 were still in place at the time of testing. Chrysotile asbestos contents of such gaskets ranged from 55% to 60% by area, for those of sheet style and 5% by area, for the spiral wound metal/asbestos style. Despite the levels of effort required to effect gasket removals, the professional aircraft mechanic was not exposed to airborne asbestos fibers at the lower limits of sampling and analytical detection achieved;all of which were substantially less than the current Occupational Safety and Health Administration Permissible Exposure Limits for asbestos. The results of this testing indicate an absence of gasket related asbestos exposure risk to mechanics who work with light aircraft engines, including those having asbestos-containing gaskets. These results are consistent with the findings of Mlyarek and Van Orden who studied the asbestos exposure risk occasioned during overhaul of larger radial style reciprocating aircraft engines [1].展开更多
For the quad tilt rotor aircraft, a computational fluid dynamics method based on multiple reference frames (MRF) was used to analyze the influence of aerodynamic layout parameters on the aerodynamic characteristics of...For the quad tilt rotor aircraft, a computational fluid dynamics method based on multiple reference frames (MRF) was used to analyze the influence of aerodynamic layout parameters on the aerodynamic characteristics of the quad tilt rotor aircraft. Firstly, a numerical simulation method for the interference flow field of the quad tilt rotor aircraft is established. Based on this method, the aerodynamic characteristics of isolated rotors, rotor combinations at different lateral positions on the wing, and rotor rotation directions under different inflow velocities were calculated and analyzed, in order to grasp their aerodynamic interference laws and provide reference for the design and control theory research of such aircraft.展开更多
The architecture and working principle of coordinated search and rescue system of unmanned/manned aircraft,which is composed of manned/unmanned aircraft and manned aircraft,were first introduced,and they can cooperate...The architecture and working principle of coordinated search and rescue system of unmanned/manned aircraft,which is composed of manned/unmanned aircraft and manned aircraft,were first introduced,and they can cooperate with each other to complete a search and rescue task.Secondly,a threat assessment method based on meteorological data was proposed,and potential meteorological threats,such as storms and rainfall,can be predicted by collecting and analyzing meteorological data.Finally,an experiment was carried out to evaluate the performance of the proposed method in different scenarios.The experimental results show that the coordinated search and rescue system of unmanned/manned aircraft can be used to effectively assess meteorological threats and provide accurate search and rescue guidance.展开更多
Pavement snow and icing are worldwide problems, but effective countermeasures are just beginning to be developed in China. The two most common snow and ice removal methods are mechanical clearance and chemical melting...Pavement snow and icing are worldwide problems, but effective countermeasures are just beginning to be developed in China. The two most common snow and ice removal methods are mechanical clearance and chemical melting, and the advantages and disadvantages of each approach are discussed here, including environmental and structural damage caused by corrosive snow melting agents. New developments in chemical melting agents and mechanical equipment are discussed, and an overview of alternative thermal melting systems is presented, including the use of geothermy and non-geothermal heating systems utilizing solar energy, electricity, conductive pavement materials, and infrared/microwave applications. Strategic recommendations are made for continued enhancement of public safety in snow and ice conditions.展开更多
De-icing technology has become an increasingly important subject in numerous applications in recent years.However,the direct numerical modeling and simulation the physical process of thermomechanical deicing is limite...De-icing technology has become an increasingly important subject in numerous applications in recent years.However,the direct numerical modeling and simulation the physical process of thermomechanical deicing is limited.This work is focusing on developing a numerical model and tool to direct simulate the de-icing process in the framework of the coupled thermo-mechanical peridynamics theory.Here,we adopted the fully coupled thermo-mechanical bond-based peridynamics(TM-BB-PD)method for modeling and simulation of de-icing.Within the framework of TM-BB-PD,the ice constitutive model is established by considering the influence of the temperature difference between two material points,and a modified failure criteria is proposed,which takes into account temperature effect to predict the damage of quasi-brittle ice material.Moreover,thermal boundary condition is used to simulate the thermal load in the de-icing process.By comparing with the experimental results and the previous reported finite element modeling,our numerical model shows good agreement with the previous predictions.Based on the numerical results,we find that the developed method can not only predict crack initiation and propagation in the ice,but also predict the temperature distribution and heat conduction during the de-icing process.Furthermore,the influence of the temperature for the ice crack growth pattern is discussed accordingly.In conclusion,the coupled thermal-mechanical peridynamics formulation with modified failure criterion is capable of providing a modeling tool for engineering applications of de-icing technology.展开更多
In order to prevent severe pollution by de-icing salt on greenery along urban roads, a half lethal dose (LD_50)for a plant population was confirmed through stress simulation of chloride de-icing salt on Euonymus jap...In order to prevent severe pollution by de-icing salt on greenery along urban roads, a half lethal dose (LD_50)for a plant population was confirmed through stress simulation of chloride de-icing salt on Euonymus japonicus, with an ianalysis of physiological changes, statistics on mortality rate on plant populations and mathematic modeling during a 30- day subacute toxicity test. The results indicate that a significant positive correlation in the early stages and a significant negative correlation in the later stages were observed between the amount of chlorophyll a and b in plants and a cumulative dose of de-icing salt. The amounts of free proline in plants and the dose of de-icing salt were positively correlated Over the entire period. No significant correlation in the initial stage, but a significant negative correlation in later stages was observed between the soluble protein and the dose of de-icing salt. LDs0 of this chloride agent on E. japonicus is 5 kg.(L·m2)-1 over 30 days.展开更多
The weapon transportation support scheduling problem on aircraft carrier deck is the key to restricting the sortie rate and combat capability of carrier-based aircraft.This paper studies the problem and presents a nov...The weapon transportation support scheduling problem on aircraft carrier deck is the key to restricting the sortie rate and combat capability of carrier-based aircraft.This paper studies the problem and presents a novel solution architecture.Taking the interference of the carrier-based aircraft deck layout on the weapon transportation route and precedence constraint into consideration,a mixed integer formulation is established to minimize the total objective,which is constituted of makespan,load variance and accumulative transfer time of support unit.Solution approach is developed for the model.Firstly,based on modeling the carrier aircraft parked on deck as convex obstacles,the path library of weapon transportation is constructed through visibility graph and Warshall-Floyd methods.We then propose a bi-population immune algorithm in which a population-based forward/backward scheduling technique,local search schemes and a chaotic catastrophe operator are embedded.Besides,the randomkey solution representation and serial scheduling generation scheme are adopted to conveniently obtain a better solution.The Taguchi method is additionally employed to determine key parameters of the algorithm.Finally,on a set of generated realistic instances,we demonstrate that the proposed algorithm outperforms all compared algorithms designed for similar optimization problems and can significantly improve the efficiency,and that the established model and the bi-population immune algorithm can effectively respond to the weapon support requirements of carrier-based aircraft under different sortie missions.展开更多
The large dual-channel wide-bodied aircraft has a long range and a high cruise Mach number.Therefore,its aerodynamic design requires a high level ofwind tunnel test refinement.Based on the requirements of aerodynamic ...The large dual-channel wide-bodied aircraft has a long range and a high cruise Mach number.Therefore,its aerodynamic design requires a high level ofwind tunnel test refinement.Based on the requirements of aerodynamic design for the future wide-bodied aircraft and the characteristics of high-speed wind tunnel tests,the error theory is introduced to analyze the factors affecting the accuracy of the test data.This study carries out a series of research on the improvement of refined aerodynamic test technology in an FL-26 wind tunnel,including design and optimization of the support system of wide-bodied aircraft,model attitude angle measurement,Mach number control accuracy,measurement and control system stability,test data correction and perfection,high-precision force balance and standard model development.In addition,the effect of the standard specification of the refined aerodynamic test is investigated to improve the data quality.The research findings have been applied in the standard model test and subsequent models of wide-bodied aircraft.The results show that whenMach numbers are less than 0.9,the control accuracy of Mach numbers in the FL-26 wind tunnel is smaller than 0.001 and the measurement error of attack angle is smaller than 0.01°.Therefore,it has the ability to correct the data influenced by factors,such as support/wall interference,model deformation,floating resistance and airflow deflection angle.The repeatability accuracy of the standard model’s comparison test shows that the lift coefficient is less than or equal to 0.0012,the drag coefficient is less than or equal to 0.00004,pitching moment coefficient is less than or equal to 0.0004.The bending resolution of the model’s deformation measurement is less than 0.2 mm,and the tensional deformation is smaller than 0.04°.The revised aerodynamic data and model deformation measurement results have good agreement with that of the ETW wind tunnel.The results demonstrate that the improved technology presented in this paper can significantly enhance the refined aerodynamic test of wide-bodied aircraft.展开更多
To effectively predict the mechanical dispatch reliability(MDR),the artificial neural networks method combined with aircraft operation health status parameters is proposed,which introduces the real civil aircraft oper...To effectively predict the mechanical dispatch reliability(MDR),the artificial neural networks method combined with aircraft operation health status parameters is proposed,which introduces the real civil aircraft operation data for verification,to improve the modeling precision and computing efficiency.Grey relational analysis can identify the degree of correlation between aircraft system health status(such as the unscheduled maintenance event,unit report event,and services number)and dispatch release and screen out themost closely related systems to determine the set of input parameters required for the prediction model.The artificial neural network using radial basis function(RBF)as a kernel function,has the best applicability in the prediction of multidimensional,small sample problems.Health status parameters of related systems are used as the input to predict the changing trend ofMDR,under the artificial neural network modeling framework.The case study collects real operation data for a certain civil aircraft over the past five years to validate the performance of the model which meets the requirements of the application.The results show that the prediction quadratic error Ep of the model reaches 6.9×10−8.That is to say,in the existing operating environment,the prediction of the number of delay&cancel events per month can be less than once.The accuracy of RBF ANN,BP ANN and GA-BP ANN are compared further,and the results show that RBF ANN has better adaptability to such multidimensional small sample problems.The efforts of this paper provide a highly efficientmethod for theMDR prediction through aircraft system health state parameters,which is a promising model to enhance the prediction and controllability of the dispatch release,providing support for the construction of the civil aircraft operation system.展开更多
In this paper,we investigate the peaking issue of extended state observers and the anti-disturbance control problem of tethered aircraft systems subject to the unstable flight of the main aircraft,airflow disturbances...In this paper,we investigate the peaking issue of extended state observers and the anti-disturbance control problem of tethered aircraft systems subject to the unstable flight of the main aircraft,airflow disturbances and deferred output constraints.Independent of exact initial values,a modified extended state observer is constructed from a shifting function such that not only the peaking issue inherently in the observer is circumvented completely but also the accurate estimation of the lumped disturbance is guaranteed.Meanwhile,to deal with deferred output constraints,an improved output constrained controller is employed by integrating the shifting function into the barrier Lyapunov function.Then,by combining the modified observer and the improved controller,an anti-disturbance control scheme is presented,which ensures that the outputs with any bounded initial conditions satisfy the constraints after a pre-specified finite time,and the tethered aircraft tracks the desired trajectory accurately.Finally,both a theoretical proof and simulation results verify the effectiveness of the proposed control scheme.展开更多
In order to enhance the transient performance of aircraft high voltage DC(HVDC)generation system with wound rotor synchronous machine(WRSM)under a wide speed range,the nonlinear PI multi-loop control strategy is propo...In order to enhance the transient performance of aircraft high voltage DC(HVDC)generation system with wound rotor synchronous machine(WRSM)under a wide speed range,the nonlinear PI multi-loop control strategy is proposed in this paper.Traditional voltage control method is hard to achieve the dynamic performance requirements of the HVDC generation system under a wide speed range,so the nonlinear PI parameter adjustment,load current feedback and speed feedback are added to the voltage and excitation current double loop control.The transfer function of the HVDC generation system is derived,and the relationship between speed,load current and PI parameters is obtained.The PI parameters corresponding to the load at certain speed are used to shorten the adjusting time when the load suddenly changes.The dynamic responses in transient processes are analyzed by experiment.The results illustrate that the WRSM HVDC generator system with this method has better dynamic performance.展开更多
This paper presents a self-structured organizing single-input control system based on differentiable cerebellar model articulation controller (CMAC) for an n-link robot manipulator to achieve the high-precision positi...This paper presents a self-structured organizing single-input control system based on differentiable cerebellar model articulation controller (CMAC) for an n-link robot manipulator to achieve the high-precision position tracking. In the proposed scheme, the single-input CMAC controller is solely used to control the plant, so the input space dimension of CMAC can be simplified and no conventional controller is needed. The structure of single-input CMAC will also be self-organized;that is, the layers of single-input CMAC will grow or prune systematically and their receptive functions can be automatically adjusted. The online tuning laws of single-input CMAC parameters are derived in gradient-descent learning method and the discrete-type Lyapunov function is applied to determine the learning rates of the proposed control system so that the stability of the system can be guaranteed. The simulation results of three-link De-icing robot manipulator are provided to verify the effectiveness of the proposed control methodology.展开更多
This paper proposes an adaptive neural control(ANC)method for the coupled nonlinear model of a novel type of embedded surface morphing aircraft which has a tiltable V-tail.A nonlinear model with sixdegrees-of-freedom ...This paper proposes an adaptive neural control(ANC)method for the coupled nonlinear model of a novel type of embedded surface morphing aircraft which has a tiltable V-tail.A nonlinear model with sixdegrees-of-freedom is established.The first-order sliding mode differentiator(FSMD)is applied to the control scheme to avoid the problem of“differential explosion”.Radial basis function neural networks are introduced to estimate the uncertainty and external disturbance of the model,and an ANC controller is proposed based on this design idea.The stability of the proposed ANC controller is proved using Lyapunov theory,and the tracking error of the closed-loop system is semi-globally uniformly bounded.The effectiveness and robustness of the proposed method are verified by numerical simulations and hardware-in-the-loop(HIL)simulations.展开更多
This article presents a methodology to determine the risk of aircrafts lateral runway excursion during landing via mathematical risk modeling. In addition, the methodology is demonstrated by means of detailed calculat...This article presents a methodology to determine the risk of aircrafts lateral runway excursion during landing via mathematical risk modeling. In addition, the methodology is demonstrated by means of detailed calculation of the lateral runway excursion risk value during the landing of the aircraft Airbus A310-200, in view of the maximum landing weight and the appropriate range of landing velocities according to the International Civil Aviation Organization specification. Obviously, the calculation demonstrates that the developed math solutions and equations presented herein are powerful tools to evaluate the risk of lateral runway excursion of the majority of aircrafts and for any airport. The method is also applicable to assess the residual level of risk at any specific airport and its deviation compared to the recommended safety level. Consequently, the presented mathematical solutions to determine the risk rate of lateral runway excursion during landing offers airports’ operational and safety management departments a viable tool so that appropriate measurements could be adopted. Finally, it is a methodology not only to assess the risk but also to determine the appropriate runway width.展开更多
The battlefield situation changes rapidly because underwater targets'are concealment and the sea environment is uncertain.So,a great number of situation information greatly increase,which need to be dealt with in ...The battlefield situation changes rapidly because underwater targets'are concealment and the sea environment is uncertain.So,a great number of situation information greatly increase,which need to be dealt with in the course of scouting underwater targets.Situation assessment in sea battlefield with a lot of uncertain information is studied,and a new situation assessment method of scouting underwater targets with fixed-wing patrol aircraft is proposed based on the cloud Bayesian network,which overcomes the deficiency of the single cloud model in reasoning ability and the defect of Bayesian network in knowledge representation.Moreover,in the method,the cloud model knowledge deal with the input data of Bayesian network reasoning,and the advantages in knowledge representation of cloud theory and reasoning of Bayesian network are applied;also,the fuzziness and stochasticity of cloud theory in knowledge expression,the reasoning ability of Bayesian network,are combined.Then,the situation assessment model of scouting underwater targets with fixed-wing patrol aircraft is established.Hence,the directed acyclic graph of Bayesian network structure is constructed and the assessment index is determined.Next,the cloud model is used to deal with Bayesian network,and the discrete Bayesian network is obtained.Moreover,after CPT of each node and the transformation between certainty degree and probability are accomplished;the final situation level is obtained through a probability synthesis formula.Therefore,the target type and the operational intention of the other side are deduced to form the battlefield situation.Finally,simulations are carried out,and the rationality and validity of the proposed method are testified by simulation results.By this method,the battlefield situation can be gained.And this method has a wider application range,especially for large sample data processing,and it has better practicability.展开更多
Aircraft designers strive to achieve optimal weight-reliability tradeoffs while designing an aircraft. Since aircraft wing skins account for more than fifty percent of their structural weight, aircraft wings must be d...Aircraft designers strive to achieve optimal weight-reliability tradeoffs while designing an aircraft. Since aircraft wing skins account for more than fifty percent of their structural weight, aircraft wings must be designed with utmost care and attention in terms of material types and thickness configurations. In particular, the selection of thickness at each location of the aircraft wing skin is the most consequential task for aircraft designers. To accomplish this, we present discrete mathematical programming models to obtain optimal thicknesses either to minimize weight or to maximize reliability. We present theoretical results for the decomposition of these discrete mathematical programming models to reduce computer memory requirements and facilitate the use of dynamic programming for design purposes. In particular, a decomposed version of the weight minimization problem is solved for an aircraft wing with thirty locations (or panels) and fourteen thickness choices for each location to yield an optimal minimum weight design.展开更多
In this project,the miniaturization of the aircraft was realized under the premise of strong maneuverability,high concealability,and driving a certain load,and the flight mode and structural characteristics of birds w...In this project,the miniaturization of the aircraft was realized under the premise of strong maneuverability,high concealability,and driving a certain load,and the flight mode and structural characteristics of birds were imitated.A small bionic flapping wing aircraft was built.The flapping of the wing was realized by the crank slider mechanism,and the sizes of each part were calculated according to the bionics formula.The wingspan was 360.37 mm,the body width was 22 mm,the body length was 300 mm,the wing area was 0.05 m^(2),the flapping amplitude was 71°.ADAMS software was used to simulate the dynamics of the designed aircraft,and the variation of flapping amplitude and angular velocity during the movement of the aircraft was obtained,which verified the feasibility of the mechanism.The prototype aircraft was made for flight test,and the designed bionic flapping wing aircraft achieved the expected effect.It provides a theoretical basis and data support for the design and manufacture of small flapping wing aircraft.展开更多
基金financially supported by National Natural Science Foundation of China(No.12002384)National Key Laboratory Foundation of China(No.614220220200107)+1 种基金National Science and Technology Major Project of China(No.J2019-II-0014-0035)Academician Workstation F0undation of the Green Aerotechnics Research Institute of Chongqing Jiaotong University(No.GATRI2020C06003)。
文摘Since flight accidents due to aircraft icing occur from time to time,this paper proposes an array of impact rod-type plasma synthetic jet de-icing methods for aircraft icing problems.The impact rod-type plasma synthetic jet actuator(PSJA)is based on the traditional PSJA with an additional impact rod structure for better de-icing in the flight environment.In this work,we first optimize the ice-breaking performance of a single-impact rod-type PSJA,and then conduct an array of impact rod-type plasma synthetic jet ice-breaking experiments to investigate the relationship between crack expansion and discharge energy,ice thickness and group spacing.The results show that the impact force and impulse of a single-impact rod-type PSJA are proportional to the discharge energy,and there exists a threshold energy Qmin for a single actuator to break the ice,which is proportional to the ice thickness.Only when the discharge energy reaches above Qmin can the ice layer produce cracks,and at the same time,the maximum radial crack length produced during the ice-breaking process is proportional to the discharge energy.When the ice is broken by an array of impact rod PSJAs,the discharge energy and group spacing together determine whether the crack can be extended to the middle region of the actuator.When the group spacing is certain,increasing the energy can increase the intersection of cracks in the middle region,and the ice-fragmentation degree is increased and the ice-breaking effect is better.At the same time,the energy estimation method of ice breaking by an array of impact rod-type PSJAs is proposed according to the law when a single actuator is breaking ice.
文摘This paper investigates the homogeneity of United States aircraft reconnaissance data and the impact of these data on the homogeneity of the tropical cyclone(TC)best track data for the seasons 1949-1987 generated by the China Meteorological Administration(CMA).The evaluation of the reconnaissance data shows that the minimum central sea level pressure(MCP)data are relatively homogeneous,whereas the maximum sustained wind(MSW)data show both overestimations and spurious abrupt changes.Statistical comparisons suggest that both the reconnaissance MCP and MSW were well incorporated into the CMA TC best track dataset.Although no spurious abrupt changes were evident in the reconnaissance-related best track MCP data,two spurious changepoints were identified in the remainder of the best-track MCP data.Furthermore,the influence of the reconnaissance MSWs seems to extend to the best track MSWs unrelated to reconnaissance,which might reflect the optimistic confidence in making higher estimates due to the overestimated extreme wind“observations”.In addition,the overestimation of either the reconnaissance MSWs or the best track MSWs was greater during the early decades compared to later decades,which reflects the important influence of reconnaissance data on the CMA TC best track dataset.The wind-pressure relationship(WPR)used in the CMA TC best track dataset is also evaluated and is found to overestimate the MSW,which may lead to inhomogeneity within the dataset between the aircraft reconnaissance era and the satellite era.
文摘We have previously evaluated asbestos exposure associated with various maintenance procedures on light aircraft. The purpose of this study was to evaluate asbestos exposure during engine maintenance on light aircraft. This test was designed to evaluate the potential for asbestos exposure to mechanics and others who remove asbestos-containing engine gaskets from reciprocating style aircraft engines. Utilized in this test was an air cooled, horizontally opposed, aviation gasoline burning engine, assembled during 1986 and operated intermittently up into 2015, having accumulated 1680 hours run time. Nearly 75% of the asbestos-containing gaskets installed during 1986 were still in place at the time of testing. Chrysotile asbestos contents of such gaskets ranged from 55% to 60% by area, for those of sheet style and 5% by area, for the spiral wound metal/asbestos style. Despite the levels of effort required to effect gasket removals, the professional aircraft mechanic was not exposed to airborne asbestos fibers at the lower limits of sampling and analytical detection achieved;all of which were substantially less than the current Occupational Safety and Health Administration Permissible Exposure Limits for asbestos. The results of this testing indicate an absence of gasket related asbestos exposure risk to mechanics who work with light aircraft engines, including those having asbestos-containing gaskets. These results are consistent with the findings of Mlyarek and Van Orden who studied the asbestos exposure risk occasioned during overhaul of larger radial style reciprocating aircraft engines [1].
文摘For the quad tilt rotor aircraft, a computational fluid dynamics method based on multiple reference frames (MRF) was used to analyze the influence of aerodynamic layout parameters on the aerodynamic characteristics of the quad tilt rotor aircraft. Firstly, a numerical simulation method for the interference flow field of the quad tilt rotor aircraft is established. Based on this method, the aerodynamic characteristics of isolated rotors, rotor combinations at different lateral positions on the wing, and rotor rotation directions under different inflow velocities were calculated and analyzed, in order to grasp their aerodynamic interference laws and provide reference for the design and control theory research of such aircraft.
基金the Study on the Impact of the Construction and Development of Southwest Plateau Airport on the Ecological Environment(CZKY2023032).
文摘The architecture and working principle of coordinated search and rescue system of unmanned/manned aircraft,which is composed of manned/unmanned aircraft and manned aircraft,were first introduced,and they can cooperate with each other to complete a search and rescue task.Secondly,a threat assessment method based on meteorological data was proposed,and potential meteorological threats,such as storms and rainfall,can be predicted by collecting and analyzing meteorological data.Finally,an experiment was carried out to evaluate the performance of the proposed method in different scenarios.The experimental results show that the coordinated search and rescue system of unmanned/manned aircraft can be used to effectively assess meteorological threats and provide accurate search and rescue guidance.
基金supported by the National Natural Science Fund of China(No.41121061)the National Key Basic Research and Development Program(No.2012CB026102)the Fund of the "Hundred People Plan" of CAS(to WenBing Yu)
文摘Pavement snow and icing are worldwide problems, but effective countermeasures are just beginning to be developed in China. The two most common snow and ice removal methods are mechanical clearance and chemical melting, and the advantages and disadvantages of each approach are discussed here, including environmental and structural damage caused by corrosive snow melting agents. New developments in chemical melting agents and mechanical equipment are discussed, and an overview of alternative thermal melting systems is presented, including the use of geothermy and non-geothermal heating systems utilizing solar energy, electricity, conductive pavement materials, and infrared/microwave applications. Strategic recommendations are made for continued enhancement of public safety in snow and ice conditions.
基金the University of California at Berkeley.Ms.Y.Song gratefully acknowledges the financial support from the Chinese Scholar Council(CSC Grant No.201706680094).
文摘De-icing technology has become an increasingly important subject in numerous applications in recent years.However,the direct numerical modeling and simulation the physical process of thermomechanical deicing is limited.This work is focusing on developing a numerical model and tool to direct simulate the de-icing process in the framework of the coupled thermo-mechanical peridynamics theory.Here,we adopted the fully coupled thermo-mechanical bond-based peridynamics(TM-BB-PD)method for modeling and simulation of de-icing.Within the framework of TM-BB-PD,the ice constitutive model is established by considering the influence of the temperature difference between two material points,and a modified failure criteria is proposed,which takes into account temperature effect to predict the damage of quasi-brittle ice material.Moreover,thermal boundary condition is used to simulate the thermal load in the de-icing process.By comparing with the experimental results and the previous reported finite element modeling,our numerical model shows good agreement with the previous predictions.Based on the numerical results,we find that the developed method can not only predict crack initiation and propagation in the ice,but also predict the temperature distribution and heat conduction during the de-icing process.Furthermore,the influence of the temperature for the ice crack growth pattern is discussed accordingly.In conclusion,the coupled thermal-mechanical peridynamics formulation with modified failure criterion is capable of providing a modeling tool for engineering applications of de-icing technology.
基金financially supported by the Science Innovation Project of Beijing Forestry University (No. 101305)the 985 Innovation Platform, China
文摘In order to prevent severe pollution by de-icing salt on greenery along urban roads, a half lethal dose (LD_50)for a plant population was confirmed through stress simulation of chloride de-icing salt on Euonymus japonicus, with an ianalysis of physiological changes, statistics on mortality rate on plant populations and mathematic modeling during a 30- day subacute toxicity test. The results indicate that a significant positive correlation in the early stages and a significant negative correlation in the later stages were observed between the amount of chlorophyll a and b in plants and a cumulative dose of de-icing salt. The amounts of free proline in plants and the dose of de-icing salt were positively correlated Over the entire period. No significant correlation in the initial stage, but a significant negative correlation in later stages was observed between the soluble protein and the dose of de-icing salt. LDs0 of this chloride agent on E. japonicus is 5 kg.(L·m2)-1 over 30 days.
基金the financial support of the National Natural Science Foundation of China(No.52102453)。
文摘The weapon transportation support scheduling problem on aircraft carrier deck is the key to restricting the sortie rate and combat capability of carrier-based aircraft.This paper studies the problem and presents a novel solution architecture.Taking the interference of the carrier-based aircraft deck layout on the weapon transportation route and precedence constraint into consideration,a mixed integer formulation is established to minimize the total objective,which is constituted of makespan,load variance and accumulative transfer time of support unit.Solution approach is developed for the model.Firstly,based on modeling the carrier aircraft parked on deck as convex obstacles,the path library of weapon transportation is constructed through visibility graph and Warshall-Floyd methods.We then propose a bi-population immune algorithm in which a population-based forward/backward scheduling technique,local search schemes and a chaotic catastrophe operator are embedded.Besides,the randomkey solution representation and serial scheduling generation scheme are adopted to conveniently obtain a better solution.The Taguchi method is additionally employed to determine key parameters of the algorithm.Finally,on a set of generated realistic instances,we demonstrate that the proposed algorithm outperforms all compared algorithms designed for similar optimization problems and can significantly improve the efficiency,and that the established model and the bi-population immune algorithm can effectively respond to the weapon support requirements of carrier-based aircraft under different sortie missions.
文摘The large dual-channel wide-bodied aircraft has a long range and a high cruise Mach number.Therefore,its aerodynamic design requires a high level ofwind tunnel test refinement.Based on the requirements of aerodynamic design for the future wide-bodied aircraft and the characteristics of high-speed wind tunnel tests,the error theory is introduced to analyze the factors affecting the accuracy of the test data.This study carries out a series of research on the improvement of refined aerodynamic test technology in an FL-26 wind tunnel,including design and optimization of the support system of wide-bodied aircraft,model attitude angle measurement,Mach number control accuracy,measurement and control system stability,test data correction and perfection,high-precision force balance and standard model development.In addition,the effect of the standard specification of the refined aerodynamic test is investigated to improve the data quality.The research findings have been applied in the standard model test and subsequent models of wide-bodied aircraft.The results show that whenMach numbers are less than 0.9,the control accuracy of Mach numbers in the FL-26 wind tunnel is smaller than 0.001 and the measurement error of attack angle is smaller than 0.01°.Therefore,it has the ability to correct the data influenced by factors,such as support/wall interference,model deformation,floating resistance and airflow deflection angle.The repeatability accuracy of the standard model’s comparison test shows that the lift coefficient is less than or equal to 0.0012,the drag coefficient is less than or equal to 0.00004,pitching moment coefficient is less than or equal to 0.0004.The bending resolution of the model’s deformation measurement is less than 0.2 mm,and the tensional deformation is smaller than 0.04°.The revised aerodynamic data and model deformation measurement results have good agreement with that of the ETW wind tunnel.The results demonstrate that the improved technology presented in this paper can significantly enhance the refined aerodynamic test of wide-bodied aircraft.
基金supported by research fund for Civil Aircraft of Ministry of Industry and Information Technology(MJ-2020-Y-14)project funded by China Postdoctoral Science Foundation(Grant No.2021M700854).
文摘To effectively predict the mechanical dispatch reliability(MDR),the artificial neural networks method combined with aircraft operation health status parameters is proposed,which introduces the real civil aircraft operation data for verification,to improve the modeling precision and computing efficiency.Grey relational analysis can identify the degree of correlation between aircraft system health status(such as the unscheduled maintenance event,unit report event,and services number)and dispatch release and screen out themost closely related systems to determine the set of input parameters required for the prediction model.The artificial neural network using radial basis function(RBF)as a kernel function,has the best applicability in the prediction of multidimensional,small sample problems.Health status parameters of related systems are used as the input to predict the changing trend ofMDR,under the artificial neural network modeling framework.The case study collects real operation data for a certain civil aircraft over the past five years to validate the performance of the model which meets the requirements of the application.The results show that the prediction quadratic error Ep of the model reaches 6.9×10−8.That is to say,in the existing operating environment,the prediction of the number of delay&cancel events per month can be less than once.The accuracy of RBF ANN,BP ANN and GA-BP ANN are compared further,and the results show that RBF ANN has better adaptability to such multidimensional small sample problems.The efforts of this paper provide a highly efficientmethod for theMDR prediction through aircraft system health state parameters,which is a promising model to enhance the prediction and controllability of the dispatch release,providing support for the construction of the civil aircraft operation system.
基金supported by the National Natural Science Foundation of China(61725303,91848205)。
文摘In this paper,we investigate the peaking issue of extended state observers and the anti-disturbance control problem of tethered aircraft systems subject to the unstable flight of the main aircraft,airflow disturbances and deferred output constraints.Independent of exact initial values,a modified extended state observer is constructed from a shifting function such that not only the peaking issue inherently in the observer is circumvented completely but also the accurate estimation of the lumped disturbance is guaranteed.Meanwhile,to deal with deferred output constraints,an improved output constrained controller is employed by integrating the shifting function into the barrier Lyapunov function.Then,by combining the modified observer and the improved controller,an anti-disturbance control scheme is presented,which ensures that the outputs with any bounded initial conditions satisfy the constraints after a pre-specified finite time,and the tethered aircraft tracks the desired trajectory accurately.Finally,both a theoretical proof and simulation results verify the effectiveness of the proposed control scheme.
基金supported by funded by"Ye Qisun"Joint Foundation Project supported by the State Key Program of National Natural Science Foundation of China under Award U2141223.
文摘In order to enhance the transient performance of aircraft high voltage DC(HVDC)generation system with wound rotor synchronous machine(WRSM)under a wide speed range,the nonlinear PI multi-loop control strategy is proposed in this paper.Traditional voltage control method is hard to achieve the dynamic performance requirements of the HVDC generation system under a wide speed range,so the nonlinear PI parameter adjustment,load current feedback and speed feedback are added to the voltage and excitation current double loop control.The transfer function of the HVDC generation system is derived,and the relationship between speed,load current and PI parameters is obtained.The PI parameters corresponding to the load at certain speed are used to shorten the adjusting time when the load suddenly changes.The dynamic responses in transient processes are analyzed by experiment.The results illustrate that the WRSM HVDC generator system with this method has better dynamic performance.
文摘This paper presents a self-structured organizing single-input control system based on differentiable cerebellar model articulation controller (CMAC) for an n-link robot manipulator to achieve the high-precision position tracking. In the proposed scheme, the single-input CMAC controller is solely used to control the plant, so the input space dimension of CMAC can be simplified and no conventional controller is needed. The structure of single-input CMAC will also be self-organized;that is, the layers of single-input CMAC will grow or prune systematically and their receptive functions can be automatically adjusted. The online tuning laws of single-input CMAC parameters are derived in gradient-descent learning method and the discrete-type Lyapunov function is applied to determine the learning rates of the proposed control system so that the stability of the system can be guaranteed. The simulation results of three-link De-icing robot manipulator are provided to verify the effectiveness of the proposed control methodology.
基金funded by the National Natural Science Foundation of China(No.61573286)the Natural Science Foundation of Shaanxi Province(2019JM-163,2020JQ-218)+1 种基金the Fundamental Research Funds for the Central Universities(3102019ZDHKY07)supported by Shaanxi Province Key Laboratory of Flight Control and Simulation Technology。
文摘This paper proposes an adaptive neural control(ANC)method for the coupled nonlinear model of a novel type of embedded surface morphing aircraft which has a tiltable V-tail.A nonlinear model with sixdegrees-of-freedom is established.The first-order sliding mode differentiator(FSMD)is applied to the control scheme to avoid the problem of“differential explosion”.Radial basis function neural networks are introduced to estimate the uncertainty and external disturbance of the model,and an ANC controller is proposed based on this design idea.The stability of the proposed ANC controller is proved using Lyapunov theory,and the tracking error of the closed-loop system is semi-globally uniformly bounded.The effectiveness and robustness of the proposed method are verified by numerical simulations and hardware-in-the-loop(HIL)simulations.
文摘This article presents a methodology to determine the risk of aircrafts lateral runway excursion during landing via mathematical risk modeling. In addition, the methodology is demonstrated by means of detailed calculation of the lateral runway excursion risk value during the landing of the aircraft Airbus A310-200, in view of the maximum landing weight and the appropriate range of landing velocities according to the International Civil Aviation Organization specification. Obviously, the calculation demonstrates that the developed math solutions and equations presented herein are powerful tools to evaluate the risk of lateral runway excursion of the majority of aircrafts and for any airport. The method is also applicable to assess the residual level of risk at any specific airport and its deviation compared to the recommended safety level. Consequently, the presented mathematical solutions to determine the risk rate of lateral runway excursion during landing offers airports’ operational and safety management departments a viable tool so that appropriate measurements could be adopted. Finally, it is a methodology not only to assess the risk but also to determine the appropriate runway width.
基金Natural Science Foundation of Shangdong,Grant/Award Number:ZR2019MF065.
文摘The battlefield situation changes rapidly because underwater targets'are concealment and the sea environment is uncertain.So,a great number of situation information greatly increase,which need to be dealt with in the course of scouting underwater targets.Situation assessment in sea battlefield with a lot of uncertain information is studied,and a new situation assessment method of scouting underwater targets with fixed-wing patrol aircraft is proposed based on the cloud Bayesian network,which overcomes the deficiency of the single cloud model in reasoning ability and the defect of Bayesian network in knowledge representation.Moreover,in the method,the cloud model knowledge deal with the input data of Bayesian network reasoning,and the advantages in knowledge representation of cloud theory and reasoning of Bayesian network are applied;also,the fuzziness and stochasticity of cloud theory in knowledge expression,the reasoning ability of Bayesian network,are combined.Then,the situation assessment model of scouting underwater targets with fixed-wing patrol aircraft is established.Hence,the directed acyclic graph of Bayesian network structure is constructed and the assessment index is determined.Next,the cloud model is used to deal with Bayesian network,and the discrete Bayesian network is obtained.Moreover,after CPT of each node and the transformation between certainty degree and probability are accomplished;the final situation level is obtained through a probability synthesis formula.Therefore,the target type and the operational intention of the other side are deduced to form the battlefield situation.Finally,simulations are carried out,and the rationality and validity of the proposed method are testified by simulation results.By this method,the battlefield situation can be gained.And this method has a wider application range,especially for large sample data processing,and it has better practicability.
文摘Aircraft designers strive to achieve optimal weight-reliability tradeoffs while designing an aircraft. Since aircraft wing skins account for more than fifty percent of their structural weight, aircraft wings must be designed with utmost care and attention in terms of material types and thickness configurations. In particular, the selection of thickness at each location of the aircraft wing skin is the most consequential task for aircraft designers. To accomplish this, we present discrete mathematical programming models to obtain optimal thicknesses either to minimize weight or to maximize reliability. We present theoretical results for the decomposition of these discrete mathematical programming models to reduce computer memory requirements and facilitate the use of dynamic programming for design purposes. In particular, a decomposed version of the weight minimization problem is solved for an aircraft wing with thirty locations (or panels) and fourteen thickness choices for each location to yield an optimal minimum weight design.
文摘In this project,the miniaturization of the aircraft was realized under the premise of strong maneuverability,high concealability,and driving a certain load,and the flight mode and structural characteristics of birds were imitated.A small bionic flapping wing aircraft was built.The flapping of the wing was realized by the crank slider mechanism,and the sizes of each part were calculated according to the bionics formula.The wingspan was 360.37 mm,the body width was 22 mm,the body length was 300 mm,the wing area was 0.05 m^(2),the flapping amplitude was 71°.ADAMS software was used to simulate the dynamics of the designed aircraft,and the variation of flapping amplitude and angular velocity during the movement of the aircraft was obtained,which verified the feasibility of the mechanism.The prototype aircraft was made for flight test,and the designed bionic flapping wing aircraft achieved the expected effect.It provides a theoretical basis and data support for the design and manufacture of small flapping wing aircraft.