The Influence of Airflow Transport Pathways on Precipitation during the Rainy Season in the Liupan Mountains of Northwest China

This study investigates the influence of airflow transport pathways on seasonal rainfall in the mountainous region of the Liupan Mountains(LM) during the rainy seasons from 2020 to 2022, utilizing observational data from seven ground gradient stations located on the eastern slopes, western slopes, and mountaintops combined with backward trajectory cluster analysis. The results indicate 1) that the LM's rainy season, characterized by overcast and rainy days, is mainly influenced by cold and moist airflows(CMAs) from the westerly direction and warm and moist airflows(WMAs) from a slightly southern direction. The precipitation amounts under four airflow transport paths are ranked from largest to smallest as follows: WMAs, CMAs, warm dry airflows(WDAs), and cold dry airflows(CDAs). 2) WMAs contribute significantly more to the intensity of regional precipitation than the other three types of airflows. During localized precipitation events,warm airflows have higher precipitation intensities at night than cold airflows, while the opposite is true during the afternoon. 3) During regional precipitation events, water vapor content is the primary influencing factor. Precipitation characteristics under humid airflows are mainly affected by high water vapor content, whereas during dry airflow precipitation, dynamic and thermodynamic factors have a more pronounced impact. 4) During localized precipitation events, the influence of dynamic and thermodynamic factors is more complex than during regional precipitation, with the precipitation characteristics of the four airflows closely related to their water vapor content, air temperature and humidity attributes, and orographic lifting. 5) Compared to regional precipitation, the influence of topography is more prominent in localized precipitation processes.

Study on the influence of side-blown airflow velocities on plasma and combustion wave generated from fused silica induced by combined pulse laser

This study examines the impact of variations in side-blowing airflow velocity on plasma generation,combustion wave propagation mechanisms,and surface damage in fused silica induced by a combined millisecond-nanosecond pulsed laser.The airflow rate and pulse delay are the main experimental variables.The evolution of plasma motion was recorded using ultrafast time-resolved optical shadowing.The experimental results demonstrate that the expansion velocities of the plasma and combustion wave are influenced differently by the sideblowing airflow at different airflow rates(0.2 Ma,0.4 Ma,and 0.6 Ma).As the flow rate of the sideblow air stream increases,the initial expansion velocities of the plasma and combustion wave gradually decrease,and the side-blow air stream increasingly suppresses the plasma.It is important to note that the target vapor is always formed and ionized into plasma during the combined pulse laser action.Therefore,the side-blown airflow alone cannot completely clear the plasma.Depending on the delay conditions,the pressure of the side-blowing airflow,the influence of inverse Bremsstrahlung radiation absorption and target surface absorption mechanisms can lead to a phenomenon known as the double combustion waves when using a nanosecond pulse laser.Both simulation and experimental results are consistent,indicating the potential for further exploration of fused silica targets in the laser field.

Distribution properties of airflow in the full envelope type maize stalk chopping chamber

Chopped and spread maize stalks improve soil structure and fertility. However, because of the absence of research on airflow distribution in the chopping chamber, improvement of the spreading uniformity of chopped stalks has been limited. Therefore, in this study, computational fluid dynamics (CFD) technology was applied to analyze the influence of structural and operational parameters of the chopping and spreading machine on the velocity, pressure, and turbulent kinetic energy distribution of airflow in the chopping chamber. The experimental factors considered were the relative position angle (RPA) between the collecting-chopping shaft and the sliding-supporting shaft, working velocity (WV) of the chopping chamber, and rotational velocity of the collecting-chopping blade (RVCCB). The results revealed that RPA and RVCCB had a significant influence on the maximum negative pressure in the inlet (MNPI), the proportion of negative pressure area at inlet (PNPAI), and the maximum pressure drop at inlet and outlet (MPDIO). Additionally, RVCCB had a strong influence on the maximum velocity, average velocity, and velocity variation coefficient of airflow at the outlet. Moreover, maximum turbulence (MT) and maximum turbulent kinetic energy dissipation rate (MTKEDR) showed a positive relationship with RVCCB. To determine the values of RPA, RVCCB, and WV, a multivariate parameters optimization regression model was constructed, which yielded the optimal values of 15°, 1800 r/min, and 0.50 m/s, respectively. Subsequently, a hyperbolic spiral-type guiding shell with an arc length of 90° was designed to enhance the uniform distribution of airflow in the chopping chamber. Finally, a validation experiment of airflow distribution was conducted. The results showed that the velocity difference between the simulation and the validation experiment was less than 15%, indicating the accuracy of CFD simulation, and the spreading uniformities of the chopped stalks were better than national standards. These findings can serve as technical and theoretical support for the design and optimization of chopping and spreading machines.

Dynamic behavior of outburst two-phase flow in a coal mine T-shaped roadway:The formation of impact airflow and its disaster-causing effect

The study of the dynamic disaster mechanism of coal and gas outburst two-phase flow is crucial for improving disaster reduction and rescue ability of coal mine outburst accidents.An outburst test in a T-shaped roadway was conducted using a self-developed large-scale outburst dynamic disaster test system.We investigated the release characteristics of main energy sources in coal seam,and obtained the dynamic characteristics of outburst two-phase flow in a roadway.Additionally,we established a formation model for outburst impact flow and a model for its flow in a bifurcated structure.The results indicate that the outburst process exhibits pulse characteristics,and the rapid destruction process of coal seam and the blocking state of gas flow are the main causes of the pulse phenomenon.The outburst energy is released in stages,and the elastic potential energy is released in the vertical direction before the horizontal direction.In a straight roadway,the impact force oscillates along the roadway.With an increase in the solid–gas ratio,the two-phase flow impact force gradually increases,and the disaster range extends from the middle of the roadway to the coal seam.In the area near the coal seam,the disaster caused by the two-phase flow impact is characterized by intermittent recovery.In a bifurcated roadway,the effect of impact airflow on impact dynamic disaster is much higher than that of two-phase flow,and the impact force tends to weaken with increasing solid-gas ratio.The impact force is asymmetrically distributed;it is higher on the left of the bifurcated roadway.With an increase in the solid-gas ratio,the static pressure rapidly decreases,and the bifurcated structure accelerates the attenuation of static pressure.Moreover,secondary acceleration is observed when the shock wave moves along the T-shaped roadway,indicating that the bifurcated structure increases the shock wave velocity.

The stability indexes of branched airflow of ventilation network in coal mine

The stability of branched airflow of ventilation network is guarantee of safety in production of coal mine. Two indexes which stand for the stability of branches of ventilation network in coal mine were put forward in this paper, that are airflow intensity and sta- bility index of branched airflow, The airflow stability of working place was divided into different grade according to the stability index. The conclusion has great significance for safety in production of coal mine.

Thermal analysis for brake disks of SiC/6061 Al alloy co-continuous composite for CRH3 during emergency braking considering airflow cooling

The mass of high-speed trains can be reduced using the brake disk prepared with SiC network ceramic frame reinforced 6061 aluminum alloy composite （SiCn/Al）. The thermal and stress analyses of SiCn/Al brake disk during emergency braking at a speed of 300 km/h considering airflow cooling were investigated using finite element （FE） and computational fluid dynamics （CFD） methods. All three modes of heat transfer （conduction, convection and radiation） were analyzed along with the design features of the brake assembly and their interfaces. The results suggested that the higher convection coefficients achieved with airflow cooling will not only reduce the maximum temperature in the braking but also reduce the thermal gradients, since heat will be removed faster from hotter parts of the disk. Airflow cooling should be effective to reduce the risk of hot spot formation and disc thermal distortion. The highest temperature after emergency braking was 461 °C and 359 °C without and with considering airflow cooling, respectively. The equivalent stress could reach 269 MPa and 164 MPa without and with considering airflow cooling, respectively. However, the maximum surface stress may exceed the material yield strength during an emergency braking, which may cause a plastic damage accumulation in a brake disk without cooling. The simulation results are consistent with the experimental results well.

Airflow adjustment and minimization of the air power of ventilation network

It is often required to know which roadway （adjustment roadway） resistances and how much values of the resis- tances should be changed to make the airflow rates in roadways （target roadways） to certain required values in the practice of mine ventilation. In this case, the airflow rates of the target roadways and the resistances of the roadways other than the ad- justment roadways are the given conditions and the resistances of the adjustment roadways are the solutions to be found. No straightforward method to solve the problem has been found up to now. Therefore, trial and error method using the ventilation network analysis program is utilized to solve the problem so far. The method takes long calculation time and the best answer is not necessarily obtained. The authors newly defined ＂airflow element＂ as an element of the ventilation network analysis. The resistances that satisfy the airflow requirements can be calculated straight forwardly by putting the function of the airflow element into the ventilation network analysis. The air power required for the ventilation can be minimized while meeting the airflow requirements by the advanced application of the method. The authors made the computer program fulfill the method. The program was applied to actual ventilation network and it was found that the method is very practical and the time required for the analysis is short.

The characteristics of sea fog with different airflow over the Huanghai Sea in boreal spring

Using the observations from ICOADS datasets and contemporaneous NCEP/NCAR reanalysis datasets during 1960-2002,the study classifies the airflows in favor of sea fog over the Huanghai （Yellow） Sea in boreal spring （April-May） with the method of trajectory analysis,and analyzes the changes of proportions of warm and cold sea fogs along different paths of airflow.According to the heat balance equation,we investigate the relationships between the marine meteorological conditions and the proportion of warm and cold sea fog along different airflow paths.The major results are summarized as follows.（1） Sea fogs over the Huanghai Sea in spring are not only warm fog but also cold fog.The proportion of warm fog only accounts for 44% in April,while increases as high as 57% in May.（2） Four primary airflow paths leading to spring sea fog are identified.They are originated from the northwest,east,southeast and southwest of the Huanghai Sea,respectively.The occurrence ratios of the warm sea fog along the east and southeast airflow paths are high of 55% and 70%,while these along the southwest and northwest airflow paths are merely 17.9% and 50%.（3） The key physical processes governing the warm/cold sea fog are heat advection transport,longwave radiation cooling at fog top,solar shortwave warming and latent heat flux between airsea interfaces.（4） The characteristics of sea fog along the four airflow paths relate closely to the conditions of water vapor advection,and the vertical distribution of relative humidity.

Numerical simulation of airflow distribution in mine tunnels

Based on 3D modelling of typical tunnels in mines, the airflow distribution in a three-center arch-section tunnel is investigated and the influence of air velocity and cross section on airflow distribution in tunnels is studied. The average velocity points were analyzed quantitatively. The results show that the airflow pattern is similar for the three-center arch section under different ventilation velocities and cross sectional areas. The shape of the tunnel cross section and wall are the critical factors influencing the airflow pattern. The average velocity points are mainly close to the tunnel wall. Characteristic equations are developed to describe the average velocity distribution, and provide a theoretical basis for accurately measuring the average velocity in mine tunnels.

Influence of gas ventilation pressure on the stability of airways airflow

Coal mine ventilation is an extremely complicated system that can be affected by many factors. Gas ventilation pressure is one of important factors that can disturb the stabilization of airflow in airways.The formation and characteristics of gas ventilation pressure were further elaborated, and numerical simulations were conducted to verify the role of gas ventilation pressure in the stability of airway airflow.Then a case study of airflow stagnation accident that occurred in the Tangshan Coal Mine was performed.The results show that under the condition of upward ventilation, the direction of gas ventilation pressure in the branch is the same to that of the main fan, airflow of the branches beside the branch may be reversed. The greater the gas ventilation pressure is, the more obvious the reversion is. Moreover, reversion sequence of paralleled branches is related to the airflow velocity and length of the branch. Under the condition of downward ventilation, the airflow in the branch filled with gas may be reversed. Methane in downward ventilation is hard to discharge; therefore, accumulation in downward ventilation is more harmful than that in upward ventilation.

Airflow characteristics by air curtain jets in full-scale room

A new air distribution pattern,air curtain jet ventilation was presented.The ventilation or airflow patterns and the air velocity produced by air curtain jet were investigated in detail.To identify the airflow characteristics of this novel air curtain jet ventilation system,a full-scale room was used to measure the jet velocity with a slot-ventilated supply device,with regards to the airflow fields along the vertical wall as well as on the horizontal floor zones.The airflow fields under three supply air velocities,1.0,1.5 and 2.0 m/s,were carried out in the full-scale room.The experimental results show the velocity profiles of air distribution,the airflow fields along the attached vertical wall and the air lake zones on the floor,respectively.The current experimental research is helpful for heating,ventilation and air conditioning(HVAC) engineers to design better air distribution in rooms.

Effects of Airflows on Dielectric Barrier Discharge in Air at Atmospheric Pressure

Effect of airflow on the dielectric barrier discharge in ambient air at atmospheric pressure is presented. The influence of airflow on the spatial distribution and intensity of a discharge were investigated experimentally. A critical frequency of 1 kHz was found. With the frequency above 1 kHz, when a fast airflow was introduced into the discharge gap, the discharge patterns varied from filaments to curved stripes and the curvature degree rose with an increase in the airflow speed. At the same time, the discharge intensity decreased. However with the discharge frequency below 1 kHz, the discharge intensity would get greater with an increase in the airflow speed.

Volume Diffuse Dielectric Barrier Discharge Plasma Produced by Nanosecond High Voltage Pulse in Airflow

Volume diffuse dielectric barrier discharge （DBD） plasma is produced in subsonic airflow by nanosecond high-voltage pulse power supply with a plate-to-plate discharge cell at 6 mm air gap length. The discharge images, optical emission spectra （OES）, the applied voltage and current waveforms of the discharge at the changed airflow rates are obtained. When airflow rate is increased, the transition of the discharge mode and the variations of discharge intensity, breakdown characteristics and the temperature of the discharge plasma are investigated. The results show that the discharge becomes more diffuse, discharge intensity is decreased accompanied by the increased breakdown voltage and time lag, and the temperature of the discharge plasma reduces when airflow of small velocity is introduced into the discharge gap. These phenomena are because that the airflow changes the spatial distribution of the heat and the space charge in the discharge gap.

The spring Yellow Sea fog：synoptic and air–sea characteristics associated with different airflow paths

The fog occurs frequently over the Yellow Sea in spring（April–May）, a climatical period of Asian monsoon transition. A comprehensive survey of the characteristic weather pattern and the air-sea condition is provided associated with the fog for the period of 1960–2006. The sea fog is categorized by airflow pathways of backward trajectory cluster analysis with the surface observations derived from international comprehensive oceanatmosphere dataset（I_COADS） I_COADS datasets and contemporaneous wind fields from the National Centers for Environmental Prediction（NCEP）/National Center for Atmospheric Research（NCAR） reanalysis. On the basis of the airflow paths, the large-scale lower-tropospheric circulation patterns and the associated surface divergence,the distribution of a vertical humidity, the horizontal water vapor transportation and the air-sea temperature difference are investigated and the major findings are summarized as follows.（1） Four primary clusters of the airflow paths that lead to spring sea fog formation are identified. They are originated from the northwest, east,southeast and southwest of the Yellow Sea, respectively.（2） Springtime Yellow Sea fog occurs under two typical weather patterns： the Yellow Sea high（YSH） and cyclone and anticyclone couplet（CAC）. Each pattern appears by about equal chance in April but the YSH occurrence drops to around one third and the CAC rises to around two third of chance in May.（3） The common feature in the two types of synoptic conditions is that surface divergence center is located over the Yellow Sea.（4） For the YSH type of fog, water vapor comes mainly from local evaporation with a well-defined dry layer present in the lower atmosphere; for the CAC type of fog, however, water vapor comes mainly from areas outside the Yellow Sea with a thick surface layer of high humidity.（5） With the differences in weather patterns and its associated vertical distribution of the humidity and the transportation of water vapor, there are two types of sea fogs. Most fogs of the CAC types are ＂warm＂ fog, while fogs of YSH type have nearly equal chance to be ＂warm＂ and ＂cold＂ fog.

Simulation and analysis of airflow stability during fire in mine belt roadway

According to fluid dynamics analysis during the fire, the criteria k-ε two-equation model for solving three-dimensional turbulence was determined, the pollutants generated in the fire disaster were set by adopting Mixture multiphase flow, and the SIMPLE algorithm was used for solving on the basis of comprehensive consideration on the heat radia- tion and components transmission during fire. By simulating the airflow flowing state inside the tunnel during fire disaster of downward ventilation, drift ventilation, and ascensional ventilation, respectively, with regard to the actual situation of No.l, No.3, and No.5 belt roadway in Kongzhuang Coal Mine, the velocity vector distributions of pollutants under different inlet air volumes were obtained, and the damage degree and influential factors of disaster were also clear, which is helpful to control and avoid disaster during belt roadway fire.

Subsurface Airflow Induced by Natural Forcings

Subsurface air flow can be induced by natural processes, such as atmospheric or barometric pressure changes, water table fluctuations, topographic effects, and rainfall infiltration. Barometric pressure fluctuations are the most common cause of subsurface air flow, which can be significant under favourable geological conditions. This process has been studied most extensively because of its application to passive soil vapor extraction. Soil air flow induced by water table fluctuations can be significant, particularly where the fluctuations are of high frequency, for example, in tidal-influenced coastal areas. Topographic effects can lead to strong subsoil air flow in areas with great elevation differences. Rainfall infiltration usually produces only weak airflow. Air flow induced by these natural processes has important environmental and engineering implications. Among the different processes, air flow induced by tidal fluctuations has been studied the least, although it has exciting applications to coastal engineering projects and environmental remediation.

Study on Airflow Field of Condensing Zone in Compact Spinning System with Perforated Drum

Negative pressure plays a very important role in compact spinning system.To know airflow field and its distribution is helpful to look into the condensing principle of fiber bundle.Therefore,computational fluid dynamics(CFD)software was used to simulate airflow field in this paper.Airflow velocity distributions both in different fiber layers and under different negative pressures were discussed.The results indicate that airflow velocity in upper layer of the fiber bundle is greater than that in lower layer.Airflow velocities in both X and Y axis directions have a positive correlation with negative pressure.It can provide a theoretical base to make high quality compact yarns in productive practice.

Active Absorption of Perforated Plate Based on Airflow

The theory of active absorption of the perforated plate is proposed in this paper.The perforated plate is used as the material of active absorption and the depth of the cavity behind the perforated plate is changed according to the resonant frequency of the perforated plate.The rigid wall is moved to produce resonance so that the absorption coefficient can reach the maximal level.It is shown from the numerical calculation that when the perforated plate resonates,the moving distance is large at low frequencies,and the absorption coefficient is low under certain conditions.Perforated plate resonance is effective for single frequency of incident sound wave,which is difficult for the wide frequency,so active absorption based on airflow is posed,and the numerical calculation and experiment are carried out.The results denote that this method of active absorption is practical.

Multi-factor influence of cross-sectional airflow distribution in roadway with rough roof

The wall surface roughness renders a significant impact on ventilation of roadways and cross-sectional wind speed distribution.Herein,the wall roughness(Ra)in the roadway has been defined theoretically.Moreover,three-center arched roadway models for different situations are established based on the normal distribution of roof roughness.The influence of inlet velocity,roof roughness and roadway height on wind speed distribution is systematically studied by using Fluent software.At Ra=0.1 m,the simulation results reveal that the wind speed is negatively related to the distance from the wall to the point where 80%of the central wind speed is reached(DA).Also,the wind speed distribution is significantly influenced by increasing the roof roughness.However,the wind speed distribution becomes asymmetric at Ra=0.2 m and 0.3 m.Furthermore,the low-speed area(v≤1 m/s)started to concentrate on the roof with the increase of roadway height.Overall,an Ra value of<0.1 m can reduce the influence of wall roughness on wind speed distribution of the roadway,which is suggested in practical applications.

Effects of the transverse electric field on nanosecond pulsed dielectric barrier discharge in atmospheric airflow

In this paper,an asymmetric electrode geometry(the misalignment between the ends of highvoltage and grounded electrodes)is proposed in order to investigate the effects of the transverse electric field on nanosecond pulsed dielectric barrier discharge(DBD).The results show that diffuse discharge manifests in the misaligned region and the micro-discharge channel in the aligned region moves directionally.Moreover,the diffuse discharge area increases with the decrease of the discharge gap and pulse repetition frequency,which is consistent with the variation of the moving velocity of the micro-discharge channel.When airflow is introduced into the discharge gap in the same direction as the transverse electric field,the dense filamentary discharge region at the airflow inlet of asymmetric electrode geometry is larger than that of symmetric electrode geometry.However,when the direction of the airflow is opposite to that of the transverse electric field,the dense filamentary discharge region of asymmetric electrode geometry is reduced.The above phenomena are mainly attributed to the redistribution of the space charges induced by the transverse electric field.