Manganese compound with evident toxicity is widely employed as the contrast medium for clinicalexaminations such as magnetic resonance imaging(MRI).In the present work,a feasible way with the applica-tion of vacuum im...Manganese compound with evident toxicity is widely employed as the contrast medium for clinicalexaminations such as magnetic resonance imaging(MRI).In the present work,a feasible way with the applica-tion of vacuum impregnation and rotary evaporation was proposed to introduce manganese chloride hydrate intothe inner cavities of template - synthesized carbon nanotubes(CNTs),and then a process of alkali treatmentwas used to liberate the loaded CNTs from the template.It is notable that the alkali attack in the presence ofresidual oxygen also resulted in a series of changes in chemical compositions of guest substances,and the ulti-mate compound of manganese was found to be manganese oxide(Mn3O4) by X-ray diffraction and transmissionelectron microscopy.Determinations of energy dispersive spectrum under scanning electron microscopy showeda high-content filling(more than 50 wt%) of Mn3O4 in the loaded CNTs.This work developed a feasible andconvenient way for the encapsulation of guest substances to reduce bio-toxic effects.展开更多
This article reported the electrochemical performance of a novel cabon microsphere/MnO2nanosheets(CMS/MnO2) composite prepared by a in situ self-limiting deposition method under hydrothermal condition. The results of ...This article reported the electrochemical performance of a novel cabon microsphere/MnO2nanosheets(CMS/MnO2) composite prepared by a in situ self-limiting deposition method under hydrothermal condition. The results of scanning electron microscopy(SEM) and transmission electron microscopy(TEM) revealed that MnO2nanosheets homogeneously grew onto the surface of CMS to form a loose-packed and dandelion-like core/shell microstructure. The unique microstructure plays a basic role in electrochemical accessibility of electrolyte to MnO2active material and a fast diffusion rate within the redox phase. The results of cyclic voltammetry, galvanostatic charge/discharge and electrochemical impedance spectrometry indicated that the prepared CMS/MnO2composite presented high capacitance of 181 F g-1and long cycle life of 61% capacity retention after 2000 charge/discharge cycles in 1 mol/L Na2SO4solution, which show strong promise for high-rate electrochemical capacitive energy storage applications.展开更多
A new sol-gel process for the preparation of ultrafine nickel hydroxideelectrode materials was developed. The composite electrodes consisting of carbon nanotubes andNi(OH)_2 were developed by mixing the hydroxide and ...A new sol-gel process for the preparation of ultrafine nickel hydroxideelectrode materials was developed. The composite electrodes consisting of carbon nanotubes andNi(OH)_2 were developed by mixing the hydroxide and carbon nanotubes together in different massratios. In order to enhance energy density, a combined type pseudocapacitor/electric double layercapacitor was considered and its electrochemical properties were characterized by cyclic voltammetryand dc charge/discharge test. The combined capacitor shows excellent capacitor behavior with anoperating voltage up to 1.6 V in KOH aqueous electrolyte. Stable charge/discharge behaviors wereobserved with much higher specific capacitance values of 24 F/g compared with that of EDLC (12 F/g)by introducing 60 percent Ni(0H)_2 in the anode material. By using the modified anode of aNi(OH)_2/carbon nanotubes composite electrode, the specific capacitance of the cell was lesssensitive to discharge current density compared with that of the capacitor employing pure nickelhydroxide as anode. The combined capacitor in this study exhibits high energy density and stablepower characteristics.展开更多
A novel type of composite electrode based on sheet like cobalt oxide particles has been used in supercapacitors. Cobalt oxide cathodically deposited from Co（NO3）2 solution with carbon nanotubes as matrix exhibited l...A novel type of composite electrode based on sheet like cobalt oxide particles has been used in supercapacitors. Cobalt oxide cathodically deposited from Co（NO3）2 solution with carbon nanotubes as matrix exhibited large pseudo-capacitance of 322 F·g^-1 in 6 mol·L^-1 KOH. A sol-gel process for the preparation of ultrafine RuO2 particles was developed to design electrodes with large surface area. The composite electrodes were developed by the deposition of RuO： on the surface of carbon nanotubes. A specific capacitance of 785 F·g^-1 can be achieved with the 20% carbon nanotubes loaded. To characterize the metal oxide nanocomposite electrode, a cyclic voltammetry and AC impedance test are executed. This study also reports a hybrid capacitor, which consists of cobalt oxide composite as a cathode and ruthenium oxide composite as an anode. The electrochemical performance of the hybrid capacitor is characterized by a dc charge/discharge test and cyclic voltammograms. The hybrid capacitor shows capacitor behavior with an extended operating voltage of 1.4 V. The maximum energy density and specific power density of the cell reach the value of 23.7 and 8.1 kW·g^-1 respectively. The hybrid capacitor exhibits high-energy density and stable power characteristics.展开更多
Single-walled carbon nanotubes （SWNTs） possess high conductivity, mechanical strength, transparency, and flexibility, and are thus suitable for use in flexible electronics, transparent electrodes, and energy-storage...Single-walled carbon nanotubes （SWNTs） possess high conductivity, mechanical strength, transparency, and flexibility, and are thus suitable for use in flexible electronics, transparent electrodes, and energy-storage and energy-harvesting applications. However, to exploit these properties, SWNTs must be de-bundled in a surfactant solution to permit processing and use. We report a new method to prepare a SWNT-based transparent conducting film （TCF） using the diazo dye 3,3＇-（[1,1＇-biphenyl]-4,4＇-diyl）bis（4-amino naphthalene-1-sulfonic acid）, commonly known as Congo red （CR）, as a dispersant. Uniform 20-nm-thick TCFs were prepared on rigid glass and flexible polyethylene terephthalate （PET） substrates. The CR-SWNT dispersion and the CR-SWNT TCFs were characterized via UV-Vis-NIR, Raman spectroscopy, FT-IR spectroscopy, transmission electron microscopy （TEM）, field-emission scanning electron microscopy （FE-SEM） and dynamic light scattering （DLS） measurements. The sheet resistivity of the CRSWNT TCF was -34 ±6.6 Ω/□ with a transmittance of 81% at 550 nm, comparable to that of indium tin oxide-based films. Unlike SWNT dispersions prepared in common surfactants, such as sodium dodecyl sulfate （SDS）, sodium cholate （SC）, and Triton X-100, the CR-SWNT dispersion was amenable to forming TCF by drop coating. The CR-SWNT TCF was also very stable, maintaining a very low sheet resistivity even after 1,000 consecutive bending cycles of 8 mm bending radius. Further, manganese dioxide （MnO2） was electrochemically deposited on the CR-SWNT-PET film （MnO2-CR-SWNT-PET）. The as-prepared MnO2- CR-SWNT-PET electrode exhibited high specific capacitance and bendability, demonstrating promise as a candidate electrode material for flexible supercapacitors.展开更多
The steady ordered micro-ribbons of oxidized multi-walled carbon nanotubes (MWNTs) were obtained through micro-aperture PTFE membrane by vacuum filtration. After treatment by mixture of concentrated nitric acid and su...The steady ordered micro-ribbons of oxidized multi-walled carbon nanotubes (MWNTs) were obtained through micro-aperture PTFE membrane by vacuum filtration. After treatment by mixture of concentrated nitric acid and sulfuric acid, the surface functional groups modified MWNTs can be easily dispersed to form a homogeneous suspension. It is found that the steady micro-ribbons existed in the films obtained by vacuum filtration of the suspension. The filtration formed steady flow field and induced steady alignment of oxidized MWNTs. The chemical treatment of MWNTs forming strong interaction between MWNTs is necessity to keep steady of the micro-ribbons microstructure.展开更多
Core-shell Bi-Bi2 O3/CNT(carbon nanotube) with 3-dimensional neural network structure where Bi-Bi2O3 nanospheres act as cell bodies supported by a 3-dimensional network of CNTs acting as synapses is designed and prepa...Core-shell Bi-Bi2 O3/CNT(carbon nanotube) with 3-dimensional neural network structure where Bi-Bi2O3 nanospheres act as cell bodies supported by a 3-dimensional network of CNTs acting as synapses is designed and prepared by simple solvothermal method and subsequent annealing autoreduction treatment,and this structure facilitates the efficient transport of electrons.It can provide two electron transfer paths due to the double contact of Bi2O3 shell with CNT and metal Bi core which enhances the efficiency of the electrochemical reaction.The Bi-Bi2 O3/CNT electrode shows a high gravimetric capacitance of 850 F g-1(1 A g-1),and the specific capacitance of Bi-Bi2O3/CNT can be still 714 F g-1 at 30 A g-1 indicating excellent rate performance.The asymmetric supercapacitor is assembled with Bi-Bi2 O3/CNT as the negative electrode and Ni(OH)2/CNT as the positive electrode,delivering a high energy density of 36.7 Wh kg-1 and a maximum power density of 8000 W kg-1.Therefore,the core-shell Bi-Bi2O3/CNT with 3-dimensional neural network structure as the negative electrode of supercapacitor shows great potential in the field of energy storage in the future.展开更多
This article reported the electrochemical behaviors of a novel hollow carbon microspheres/manganese dioxide nanosheets(micro-HC/nano-MnO2) composite prepared by an in situ self-limiting deposition method under hydroth...This article reported the electrochemical behaviors of a novel hollow carbon microspheres/manganese dioxide nanosheets(micro-HC/nano-MnO2) composite prepared by an in situ self-limiting deposition method under hydrothermal condition. The results of scanning electron microscopy reveal that MnO2 nanosheets homogeneously grow onto the surface of micro-HC to form a loose-packed microstructure. The quantity of MnO2 required in the electrode layer has thereby been reduced significantly, and higher specific capacitances have been achieved. The micro-HC/nano-MnO2 electrode presents a high capacitance of 239.0 F g-1 at a current density of 5 m A cm-2, which is a strong promise for high-rate electrochemical capacitive energy storage applications.展开更多
文摘Manganese compound with evident toxicity is widely employed as the contrast medium for clinicalexaminations such as magnetic resonance imaging(MRI).In the present work,a feasible way with the applica-tion of vacuum impregnation and rotary evaporation was proposed to introduce manganese chloride hydrate intothe inner cavities of template - synthesized carbon nanotubes(CNTs),and then a process of alkali treatmentwas used to liberate the loaded CNTs from the template.It is notable that the alkali attack in the presence ofresidual oxygen also resulted in a series of changes in chemical compositions of guest substances,and the ulti-mate compound of manganese was found to be manganese oxide(Mn3O4) by X-ray diffraction and transmissionelectron microscopy.Determinations of energy dispersive spectrum under scanning electron microscopy showeda high-content filling(more than 50 wt%) of Mn3O4 in the loaded CNTs.This work developed a feasible andconvenient way for the encapsulation of guest substances to reduce bio-toxic effects.
基金Financial support from National Natural Science Foundation of China (Nos.21376208 and 91534114),the Zhejiang Provincial Natural Science Foundation for Distinguished Young Scholars of China (No.LR13B030001),the Fundamental Research Funds for the Central Universities,and the Partner Group Program of the Zhejiang University and the Max-Planck Society is appreciated greatly.
基金supported by the National Natural Science Foundation of China(No.51363014,51362018,51203071 and 21163010)the Key Project of Chinese Ministry of Education(No.212183)the Natural Science Funds for Distinguished Young Scholars of Gansu Province(No1111RJDA012)
文摘This article reported the electrochemical performance of a novel cabon microsphere/MnO2nanosheets(CMS/MnO2) composite prepared by a in situ self-limiting deposition method under hydrothermal condition. The results of scanning electron microscopy(SEM) and transmission electron microscopy(TEM) revealed that MnO2nanosheets homogeneously grew onto the surface of CMS to form a loose-packed and dandelion-like core/shell microstructure. The unique microstructure plays a basic role in electrochemical accessibility of electrolyte to MnO2active material and a fast diffusion rate within the redox phase. The results of cyclic voltammetry, galvanostatic charge/discharge and electrochemical impedance spectrometry indicated that the prepared CMS/MnO2composite presented high capacitance of 181 F g-1and long cycle life of 61% capacity retention after 2000 charge/discharge cycles in 1 mol/L Na2SO4solution, which show strong promise for high-rate electrochemical capacitive energy storage applications.
文摘A new sol-gel process for the preparation of ultrafine nickel hydroxideelectrode materials was developed. The composite electrodes consisting of carbon nanotubes andNi(OH)_2 were developed by mixing the hydroxide and carbon nanotubes together in different massratios. In order to enhance energy density, a combined type pseudocapacitor/electric double layercapacitor was considered and its electrochemical properties were characterized by cyclic voltammetryand dc charge/discharge test. The combined capacitor shows excellent capacitor behavior with anoperating voltage up to 1.6 V in KOH aqueous electrolyte. Stable charge/discharge behaviors wereobserved with much higher specific capacitance values of 24 F/g compared with that of EDLC (12 F/g)by introducing 60 percent Ni(0H)_2 in the anode material. By using the modified anode of aNi(OH)_2/carbon nanotubes composite electrode, the specific capacitance of the cell was lesssensitive to discharge current density compared with that of the capacitor employing pure nickelhydroxide as anode. The combined capacitor in this study exhibits high energy density and stablepower characteristics.
文摘A novel type of composite electrode based on sheet like cobalt oxide particles has been used in supercapacitors. Cobalt oxide cathodically deposited from Co（NO3）2 solution with carbon nanotubes as matrix exhibited large pseudo-capacitance of 322 F·g^-1 in 6 mol·L^-1 KOH. A sol-gel process for the preparation of ultrafine RuO2 particles was developed to design electrodes with large surface area. The composite electrodes were developed by the deposition of RuO： on the surface of carbon nanotubes. A specific capacitance of 785 F·g^-1 can be achieved with the 20% carbon nanotubes loaded. To characterize the metal oxide nanocomposite electrode, a cyclic voltammetry and AC impedance test are executed. This study also reports a hybrid capacitor, which consists of cobalt oxide composite as a cathode and ruthenium oxide composite as an anode. The electrochemical performance of the hybrid capacitor is characterized by a dc charge/discharge test and cyclic voltammograms. The hybrid capacitor shows capacitor behavior with an extended operating voltage of 1.4 V. The maximum energy density and specific power density of the cell reach the value of 23.7 and 8.1 kW·g^-1 respectively. The hybrid capacitor exhibits high-energy density and stable power characteristics.
文摘Single-walled carbon nanotubes （SWNTs） possess high conductivity, mechanical strength, transparency, and flexibility, and are thus suitable for use in flexible electronics, transparent electrodes, and energy-storage and energy-harvesting applications. However, to exploit these properties, SWNTs must be de-bundled in a surfactant solution to permit processing and use. We report a new method to prepare a SWNT-based transparent conducting film （TCF） using the diazo dye 3,3＇-（[1,1＇-biphenyl]-4,4＇-diyl）bis（4-amino naphthalene-1-sulfonic acid）, commonly known as Congo red （CR）, as a dispersant. Uniform 20-nm-thick TCFs were prepared on rigid glass and flexible polyethylene terephthalate （PET） substrates. The CR-SWNT dispersion and the CR-SWNT TCFs were characterized via UV-Vis-NIR, Raman spectroscopy, FT-IR spectroscopy, transmission electron microscopy （TEM）, field-emission scanning electron microscopy （FE-SEM） and dynamic light scattering （DLS） measurements. The sheet resistivity of the CRSWNT TCF was -34 ±6.6 Ω/□ with a transmittance of 81% at 550 nm, comparable to that of indium tin oxide-based films. Unlike SWNT dispersions prepared in common surfactants, such as sodium dodecyl sulfate （SDS）, sodium cholate （SC）, and Triton X-100, the CR-SWNT dispersion was amenable to forming TCF by drop coating. The CR-SWNT TCF was also very stable, maintaining a very low sheet resistivity even after 1,000 consecutive bending cycles of 8 mm bending radius. Further, manganese dioxide （MnO2） was electrochemically deposited on the CR-SWNT-PET film （MnO2-CR-SWNT-PET）. The as-prepared MnO2- CR-SWNT-PET electrode exhibited high specific capacitance and bendability, demonstrating promise as a candidate electrode material for flexible supercapacitors.
文摘The steady ordered micro-ribbons of oxidized multi-walled carbon nanotubes (MWNTs) were obtained through micro-aperture PTFE membrane by vacuum filtration. After treatment by mixture of concentrated nitric acid and sulfuric acid, the surface functional groups modified MWNTs can be easily dispersed to form a homogeneous suspension. It is found that the steady micro-ribbons existed in the films obtained by vacuum filtration of the suspension. The filtration formed steady flow field and induced steady alignment of oxidized MWNTs. The chemical treatment of MWNTs forming strong interaction between MWNTs is necessity to keep steady of the micro-ribbons microstructure.
文摘Core-shell Bi-Bi2 O3/CNT(carbon nanotube) with 3-dimensional neural network structure where Bi-Bi2O3 nanospheres act as cell bodies supported by a 3-dimensional network of CNTs acting as synapses is designed and prepared by simple solvothermal method and subsequent annealing autoreduction treatment,and this structure facilitates the efficient transport of electrons.It can provide two electron transfer paths due to the double contact of Bi2O3 shell with CNT and metal Bi core which enhances the efficiency of the electrochemical reaction.The Bi-Bi2 O3/CNT electrode shows a high gravimetric capacitance of 850 F g-1(1 A g-1),and the specific capacitance of Bi-Bi2O3/CNT can be still 714 F g-1 at 30 A g-1 indicating excellent rate performance.The asymmetric supercapacitor is assembled with Bi-Bi2 O3/CNT as the negative electrode and Ni(OH)2/CNT as the positive electrode,delivering a high energy density of 36.7 Wh kg-1 and a maximum power density of 8000 W kg-1.Therefore,the core-shell Bi-Bi2O3/CNT with 3-dimensional neural network structure as the negative electrode of supercapacitor shows great potential in the field of energy storage in the future.
基金supported by the National Natural Science Foundation of China (51203071, 51363014 and 51362018)China Postdoctoral Science Foundation (2014M552509)+1 种基金the Key Project of Chinese Ministry of Education (212183)the Natural Science Funds for Distinguished Young Scholars of Gansu Province (1111RJDA012)
文摘This article reported the electrochemical behaviors of a novel hollow carbon microspheres/manganese dioxide nanosheets(micro-HC/nano-MnO2) composite prepared by an in situ self-limiting deposition method under hydrothermal condition. The results of scanning electron microscopy reveal that MnO2 nanosheets homogeneously grow onto the surface of micro-HC to form a loose-packed microstructure. The quantity of MnO2 required in the electrode layer has thereby been reduced significantly, and higher specific capacitances have been achieved. The micro-HC/nano-MnO2 electrode presents a high capacitance of 239.0 F g-1 at a current density of 5 m A cm-2, which is a strong promise for high-rate electrochemical capacitive energy storage applications.
