During discharge, appropriately changing the development paths of electron avalanches and increasing the number of initial electrons can effectively inhibit the formation of filamentary discharge. Based on the aforeme...During discharge, appropriately changing the development paths of electron avalanches and increasing the number of initial electrons can effectively inhibit the formation of filamentary discharge. Based on the aforementioned phenomenon, we propose a method of using microdischarge electrodes to produce a macroscopic discharge phenomenon. In the form of an asymmetric structure composed of a carbon fiber electrode, an electrode structure of carbon fiber spiral-contact type is designed to achieve an atmospheric pressure glow discharge in air, which is characterized by low discharge voltage, low energy consumption, good diffusion and less ozone generation.展开更多
The effects of gas, pressure and temperature on the production of amorphous carbon nanotubes were inves- tigated using an arc discharging furnace at controlled tem- perature. Co/Ni alloy powder was used as catalyst. T...The effects of gas, pressure and temperature on the production of amorphous carbon nanotubes were inves- tigated using an arc discharging furnace at controlled tem- perature. Co/Ni alloy powder was used as catalyst. The dis- charge current was 80 A and voltage was 32 V. The optimal parameters were obtained: 600℃ temperature, hydrogen gas and 500 torr pressure. The productivity and purity of amorphous carbon nanotubes are 6.5 gram per hour and 80%, respectively. The diameter of the amorphous carbon nanotubes is about 7—20 nm.展开更多
Based on the production of a carbon nanotube (CNT) assembly, a new technique is developed for preparing CNT/epoxy (EP) composite films with high tensile strength and electrical conductivity. CNTs are synthesized by fl...Based on the production of a carbon nanotube (CNT) assembly, a new technique is developed for preparing CNT/epoxy (EP) composite films with high tensile strength and electrical conductivity. CNTs are synthesized by floating catalyst spray pyrolysis. After self-assembling into a hollow cylindrical assembly, CNTs are drawn and wound on a rotating drum to form a uniform CNT film. EP resin solutions of different concentrations are used to fill into the pores within the film under different pressures and form composite films after hot-press curing. The permeability of the EP resin and thus the interfacial bonding between the CNT and the EP resin are studied by varying the concentration of the EP resin solution and the pressure used for impregnation. Under optimal preparation conditions, the composite film contains CNTs of a high content of 59 wt.%, and shows a high tensile strength of 1.4 GPa and a high electrical conductivity of 1.4x10^5 S·m^-1, 159% and 309% higher than those of the neat CNT film, respectively.展开更多
基金Supported by the National Natural Science Foundation of China under Grant No 51577011
文摘During discharge, appropriately changing the development paths of electron avalanches and increasing the number of initial electrons can effectively inhibit the formation of filamentary discharge. Based on the aforementioned phenomenon, we propose a method of using microdischarge electrodes to produce a macroscopic discharge phenomenon. In the form of an asymmetric structure composed of a carbon fiber electrode, an electrode structure of carbon fiber spiral-contact type is designed to achieve an atmospheric pressure glow discharge in air, which is characterized by low discharge voltage, low energy consumption, good diffusion and less ozone generation.
文摘The effects of gas, pressure and temperature on the production of amorphous carbon nanotubes were inves- tigated using an arc discharging furnace at controlled tem- perature. Co/Ni alloy powder was used as catalyst. The dis- charge current was 80 A and voltage was 32 V. The optimal parameters were obtained: 600℃ temperature, hydrogen gas and 500 torr pressure. The productivity and purity of amorphous carbon nanotubes are 6.5 gram per hour and 80%, respectively. The diameter of the amorphous carbon nanotubes is about 7—20 nm.
基金the National Key R&D Program of China (2018YFA0208404)the National Natural Science Foundation of China (U1362104).
文摘Based on the production of a carbon nanotube (CNT) assembly, a new technique is developed for preparing CNT/epoxy (EP) composite films with high tensile strength and electrical conductivity. CNTs are synthesized by floating catalyst spray pyrolysis. After self-assembling into a hollow cylindrical assembly, CNTs are drawn and wound on a rotating drum to form a uniform CNT film. EP resin solutions of different concentrations are used to fill into the pores within the film under different pressures and form composite films after hot-press curing. The permeability of the EP resin and thus the interfacial bonding between the CNT and the EP resin are studied by varying the concentration of the EP resin solution and the pressure used for impregnation. Under optimal preparation conditions, the composite film contains CNTs of a high content of 59 wt.%, and shows a high tensile strength of 1.4 GPa and a high electrical conductivity of 1.4x10^5 S·m^-1, 159% and 309% higher than those of the neat CNT film, respectively.
