Preparation and characterization of biodegradable aliphatic-aromatic copolyesters/nano-SiO_2 hybrids via in situ melt polycondensation

In situ melt polycondensation was proposed to prepare biodegradable aliphatic-aromatic copolyesters/nano-SiO2 hybrids based on terephthalic acid （TPA）, poly（L-lactic acid） oligomer （OLLA）, 1,4-butanediol （BDO） and nano-SiO2. TEM and FT-IR characterizations confirmed that TPA, OLLA and BDO copolymerized to obtain biodegradable copolyesters, poly（butylene terepbthalate-co-lactate） （PBTL）, and the abundant hydroxyl groups on the surface of nano-SiO2 provided potential sites for in situ grafting with the simultaneous resulted PBTL. The nano-SiO2 particles were chemically wrapped with PBTL to form PBTL/nano- SiO2 hybrids. Due to the good dispersion and interfacial adhesion of nano-SiO2 particles with the copolyester matrix, the tensile strength and the Young＇s modulus increased from 5.4 and 5.6 MPa for neat PBTL to 16 and 390 MPa for PBTL/nano-SiO2 hybrids with 5 wt.% nano-SiO2, respectively. The mechanical properties of PBTL/nano-SiO2 hybrids were substantially improved.

EFFECT OF CHEMICAL STRUCTURE OF COMONOMERS ON THE PROPERTIES OF COPOLYESTERS

The effect of different kinds of comonomers with or without flexible chain on properties of copolyesters, such as transition temperature, crystallization velocity, crystallinity and size Of crystallites, is studied. The experimental results indicate the obvious difference in properties between comonomers with iso-and ortho-structure of phenyl ring and comonomers with flexible chain. The influence of chemical structure of comonomers on properties of copolyesters is discussed.

SYNTHESIS AND AVERAGE SEQUENCE LENGTH DETERMINATION OF AROMATIC-ALIPHATIC COPOLYESTERS CONTAINING POLY(ALKYLENE OXALATE)UNITS

Two series of aromatic-aliphatic random copolyesters(PEBTOXS)with diverse diol ratios have been synthesized by direct melting polycondensation.Two kinds of diols(glycol(EG)and 1,4-butanediol(BD))are used in combination in order to adjust crystallization and tensile properties,and three kinds of diacids(dimethyl terephthalate(DMT),diethyl oxalate(DEOX),and sebacic acid(SA))are involved.~1H-NMR spectra quantify both composition and structure,and show that the final contents in copolyesters appropriate to the ...

Synthesis and Structure of Butylene Terephthalate-ε-Caprolactone Copolyesters

A series of butylene terephthalate-E-caprolactone copolyesters (BCL) with different hard segment content were successfully synthesized and characterized by 1H-NMR. DSC. PLM and U viscometer, The sequence structure and crystallization characteristics of BCL copolyesters were carefully investigated.

Research in the Degradation and Antifouling Performance of Copolyesters of L-Lactide and ε-Caprolactonen

Block copolyesters of L-lactide and ε-caprolactone were synthesized by melt copolymerization of ε-caprolactone and L-lactide.The degradation performance of copolyesters was investigated by quartz crystal microbalance with dissipation(QCM-D).Diisocyanate terminated copolyesters could obtain via the reaction of copolyesters and diisocyanate.Diisocyanate terminated copolyesters could react with polyol resin to prepare degradable polyurethane which can be used in antifouling coatings.In this paper,we also discussed the degradation products release action and antifouling performance of the copolyesters film.

PROPERTIES AND MICROSTRUCTURE OF AROMATIC LIQUID CRYSTALLINE COPOLYESTERS

The properties and structures of thermotropical liquid crystalline copolyesters based on p-hydroxybenzoic acid (PHBA), terephthalic acid (TPR) and bisphenol A (BPA) were studied by DSC, WAXD, hot stage polarized microscopy and NMR. It was found that most of the copolyesters were soluble in many common organic solvents. The copolyesters had low T-m/T-f values and a broad range of liquid crystal phase, making the polymers readily melt-processable. The effects of annealing at different temperatures on the copolyester containing 33% PHBA were also discussed. It was noted that annealing at ca. 200 degrees C (below Tc - n) could lead to the increasing of the crystallinity of the copolyester while the microstructure and sequence structure had not changed. Annealing at ca. 280 degrees C (near Tc - n) could bring a change of crystal and sequence structure and simultaneously made the microdomains be ordered more perfectly.

SYNTHESIS AND CHARACTERIZATION OF AROMATIC LIQUID CRYSTALLINE COPOLYESTERS WITH REGULAR SEQUENCE STRUCTURE

Several novel aromatic liquid crystalline copolyesters with regular sequence structure were prepared by melt Sehotten-Baumann polycondensation via complex monomer. Polarizing microscope with hot stage, thermal analysis and X-ray diffraction were used to investigate the structure and properties of the copolyesters. The effects of structural units, such as flexible spacer, noncolinear meta-linked phenylene unit, crankshaft unit, kink with flexible bridging unit and various substituted benzene rings on melting temperature of aromatic copolyesters were studied and discussed on the basis of crystalline structure of the polymers.

SYNTHESIS AND CHARACTERIZATION OF THERMOTROPIC COPOLYESTERS AND COPOLY (ESTER-AMIDE)S CONTAINING OXYETHYLENE-ETHER AS THE SPACER

Flexible oxyethylene-ether was introduced into the aromatic copolyesters and copoly (ester-amide)s to reduce the melting point of resulting polymers. The melting point was greatly reduced to 200 degrees C or even lower in some cases, and the molecular weight was satisfactorily high as reflected by inherent viscosity. The polymers exhibited high thermal stability and good mechanical properties as determined by TGA and mechanical tests. The copolyester showed better crystallinity and liquid crystallinity than corresponding copoly (ester-amide)s with similar monomer composition as reflected by POM observation and WAXD study. The melting points for both copolyesters and copoly (ester-amide)s showed great dependence on the p-acetoxybenzoic acid (PAB) content in monomer composition and reached the lowest value when PAB was 29 mol%.

SYNTHESIS OF LIQUID CRYSTALLINE COPOLYESTERS WITH T-SHAPED TWO-DIMENSIONAL MESOGENIC UNIT AND CROWN ETHER CYCLE

A novel series of liquid crystalline copolyesters with T-shaped two-dimensional mesogenic unit and crown ether cycle of cis-4,4′-bis(4-hydroxyphenylazo)dibenzo-18-crown-6 was prepared via solution condensation polymerization from 4,4′-(α,ω-hexanedioyloxy)dibenzoyl dichloride(M_1),2-(4′-ethoxyphenyl)hydroquinone(M_2)and cis-4,4′-bis(4- hydroxyphenylazo)dibenzo-18-crown-6(M_3).The molecular weights of copolyesters are not high,and the intrinsic viscosity [η]of copolyesters ranges from 0.29-0.43.The monomers ...

STUDIES ON THE SEQUENCE STRUCTURE OF TPA/EG/PHB LIQUID CRYSTALLINE COPOLYESTERS

In this paper, the sequence structure of TPA/EG/PHB liquid crystalline copolyesters made from different synthetic methods has been studied by;H-NMR with the help of computer program of processing peaks. The results showed that the ether bonds were not observed in TPA./EG/PHB copolyesters and the synthetic process had a great effect on their sequence structure. Under certain conditions, the high,random TPA/EG/PHB copolyesters which were considered to have higher performances than PET/xPHB could be obtained.

BIODEGRADABLE ALIPHATIC/AROMATIC COPOLYESTERS BASED ON TEREPHTHALIC ACID AND POLY(L-LACTIC ACID):SYNTHESIS,CHARACTERIZATION AND HYDROLYTIC DEGRADATION

Biodegradable aliphatic/aromatic copolyesters, poly（butylene terephthalate-co-lactate） （PBTL） were prepared via direct melt polycondensation of terephthalic acid （TPA）, 1,4-butanediol （BDO） and poly（L-lactic acid） oligomer （OLLA）. The effects of polymerization time and temperature, as well as aliphatic/aromatic moiety ratio on the physical and thermal properties were investigated. The largest molecular weight of the copolyesters was up to 64100 with molecular weight distribution index of 2.09 when the polycondensation was carried out at 230℃ for 6 h. DSC, XRD, DMA and TGA analysis clearly indicated that the degree of crystallinity, glass-transition temperature, melting point, decomposition temperature, tensile strength, elongation and Young＇s modulus were influenced by the ratio between TPA and OLLA in the final copolyesters. Hydrolytic degradation results demonstrated that the incorporation of biodegradable lactate moieties into the aromatic polyester could efficiently improve hydrolytic degradability of the copolymer even though it still had many aromatic units in the main chains.

SYNTHESIS OF MAIN CHAIN LIQUID CRYSTALLINE COPOLYESTERS WITH X-SHAPED TWO-DIMENSIONAL MESOGENIC UNIT AND CROWN ETHER CYCLE

A novel series of main chain liquid crystalline copolyesters with X-shaped two-dimensional mesogenic unit and crown ether cycle of cis-4,4＇-bis（4-hydroxyphenylazo） dibenzo-18-crown-6 was prepared via solution condensation polymerization from 4,4＇-（a;arhexanedioyloxy） dibenzoyl dichloride （MI）, 2,5-bis（p-octyloxybenzoyloxy） hydro-quinone （M2） and cis-4,4＇-bis（4-hydroxyphenylazo） dibenzo-18-crown-6 （M3）. Monomer MI was synthesized by esterification and substitution of adipoyl chloride with p-hydroxybenzoic acid, monomer M2 was synthesized by esterfication and reduction reaction of 2,5-dihydroxybenzoquinone and p-octanoxybenzoyl chloride and monomer M3 was synthesized by diazotization and coupling reaction of cis-diaminodibenzo-18-crown-6 with phenol. The molecular weights of copolyesters are not high, and the intrinsic viscosity [η] of copolyesters ranges from 0.25-0.35. The monomers＇ structures were identified by using elemental analysis, IR, UV, ^1H-NMR, MS, etc. All the copolyesters are yellowish powders and insoluble in THF and CHC13 at room temperature except cPg. The properties of copolyesters were investigated by using GPC, [η] , DSC, TG, WAXD and POM. It was found that all the copolyesters entered into liquid crystal phase when they were heated to above their melting temperature （Tin）. The typical smectic and nematic phase texture can be observed on POM. Their mesophase transition temperature and thermal stability change regularly with varying the content of cis-4,4＇-bis（4-hydroxyphenylazo） dibenzo-18-crown-6 unit in the copolyesters.

SYNTHESIS OF DIACETYLENE-CONTAINING COPOLYESTERS AND THEIR DFFECT ON ELECTRO-OPTICAL PROPERTIES OF LIQUID CRYSTALS

Some diacetylene-containing copolyesters with different ratios of dipropargyl 1,10-decanate anddipropargyl terephthalate were synthesized. Properties of these copolymers were characterized by differentialscanning calorimetry and polarizing optical microscopy. The copolymer could be cross-linked easily by UVirradiation in a liquid crystal matrix without adding any photoinitiator. The preliminary studies showed thatthe diacetylene-containing polymer network can assist liquid crystal molecules to align with the externalelectric field, thus reducing the response time of display devices.

OPTICALLY ACTIVE COPOLYESTERS BASED ON AXIALLY DISSYMMETRIC 1,1’-BINAPHTHALENE-2,2’-DIYL UNITS

Optically active copolyesters based on axially dissymmetric 1,1'-binaphthalene-2,2'-diyl units have been preparedand characterized by specific rotation, ^(13)C-NMR and CD spectra. The results show that the rotation signs of tribasiccopolyesters or the mixture of corresponding homopolyesters obey a three dimensional quadrant pattern. The composition ofthe copolyesters was determined from ^(13)C-NMR spectra to be triad sequence distributions and corresponding with the ratioby feed.

SYNTHESIS AND CHARACTERIZATION OF MAIN CHAIN AROMATIC LIQUID CRYSTAL COPOLYESTERS WITH X-SHAPED AND ROD-SHAPED MESOGENIC UNITS

A series of main chain liquid crystal aromatic copolyesters with X-shaped and rod-shaped mesogenic units were synthesized via solution condensation polymerizations of 4,4'-(alpha,omega-octanedioyloxy)-dibenzoyl dichlorides with 2,5-bis(p-octanoxy benzoyloxy)-hydroquinone and diphenol. All of the copolyesters showed thermotropic liquid crystalline behaviors through observations using DSC, polarized microscopy and X-ray diffraction. The melting point (T-m) and the isotropization temperature (T-i) change regularly with varying the content of diphenol unit in the copolymers.

SYNTHESIS AND PROPERTIES OF THERMOTROPIC LIQUID CRYSTALLINE COPOLYESTERS CONTAINING BIS（4－HYDROXYPHENYL）METHANONE（Ⅴ）

A new series of fully aromatic thermotropic liquid crystalline copolyesters were synthesized by thermal polycondensation of p-hydroxybenzoic acid [PHB], terephthalic acid [TPA], resorcinol [RES] and bis (4-hydroxyphenyl) methanone [BHP]. The DSC traces of copolyesters exhibited two or three endotherms, the low temperature endotherm(Tm) of which indicated the transition from solid state to anisotropic phase. Observation under polarizing microscope and WAXD measurements suggested that the LC-phase formed immediately above Tm had a nematic character.

Ultrasonic Mechanical, Dialectical and Morphology Characterizations of Unsaturated Copolyesters and Terpolyesters

In a previous study we focused on the synthesis of new family of unsaturated copolyesters and terpolyesters by interfacial condensation polymerization. Here, in this study as complementary work of physical characterizations, we focused on the morphological features using X-ray and SEM investigation. Further, the mechanical properties of solid polymers were also studied by a new technique echo-pulse using ultrasonic impulses. This technique was used for solid polymers to determine the elastic moduli involving, Young’s modulus, shear modulus, bulk modulus and micro-hardness modulus. The statistical relation between different kinds of copolyesters and terpolyesters with Poisson’s ratio (υ) and micro-hardness were shown. The dielectric constant (?) and the electrical resistance (Rp) of the solid copolyesters and terpolyesters including aliphatic, aromatic and azo group in the main chain have been studied at room temperature. Moreover, the relation between frequency and dielectric constant for the selective polymers has been also illustrated.

Biobased Vanillic Acid and Ricinoleic Acid: Building Blocks for Fully Renewable Copolyesters

New fully biobased polyether/esters have been synthesized by a one-pot polymerization reaction of ricinoleic acid(RA),vanillic acid(VA)and ethylene carbonate(EC).In particular,EC selectively reacts with the phenolic group of VA to obtain in-situ 4-(2-hydroxyethoxy)-3-methoxybenzoate(EV),suitable for subsequent copolymerization with RA.The procedure was carried out in a single step,without any solvent.Chemical structure and thermal properties of the new materials were studied in order to explore relationships between composition and final performances.The combination of EV,bearing a rigid aromatic structure,with RA,characterized by high flexibility and potential biocidal activity,allows the production of a novel class of fully biobased aliphatic-aromatic polymers presenting tuneable thermal properties and suitable for a range of applications,for example,in active packaging and biomedical fields.

PREPARATION OF LIQUID CRYSTALLINE COPOLYESTERS WITH SPACERS BASED ON BISPHENOL-A,BISPHENOL-S OR POLYSULFONE BY DIRECT POLYCONDENSATION

Four series of copolyesters were synthesized by direct polycondonsation reaction between aromatic dicarboxylic acids and bisphenols by using tosyi chloride and N, N-dimethylformamide ( DMF ) in pyridine under mild conditions. The electron-rich hydroxyl groups of bisphenols favoured the polycondensation reaction and the order of relative reactivities of bisphenols is as follow:bisphenoI-A> hydroquinone ～ bisphenol-S> chlorohydroquinone. The mesomorphic properties of copolyesters were examined by birefringence under polarizing microscope, melt transparency. DSC and X-ray diffraction. The minimum molar fraction of mesogenic units needed for the appearance of liquid crystallinity is not higher than 0. 1 despite of the different varieties and lengths of the spacers studied.

PREPARATION OF FUNCTIONAL MATERIALS BY BLENDING COPOLYESTERS WITH PVA AND METAL COMPLEX FORMATION OF POLYMER BLENDS

Copolyesters having secondary and tertiary amine salt groups in the main and side chains are prepared by chemoselective polymerization. These copolyesters are soluble in a 10% aqueous solution of poly(vinyl alcohol) (PVA) at 90 degree C and act as plasticizer in the blend films cast from the solution. Only a glass transition temperature is observed for all these blends indicating the formation of compatible blends from these polyesters with PVA. These blends exhibit manifold characteristics such as ionic conductivity, complex formation with metal ions, absorption of moisture and color changes. The electric conductivity of the copolyesters and blends is in the range of 10** minus **6 Scm** minus **1. The blends with PVA forms complexes with Cu**2** plus and Co**2** plus . The coordination structure with two chelate rings is suggested for these polymer blend/metal complexes. (Author abstract) 10 Refs.