The effects of glass powder on the strength development, chloride permeability and potential alkali-aggregate reaction expansion of lightweight aggregate concrete were investigated. Ground blast furnace slag, coal fly...The effects of glass powder on the strength development, chloride permeability and potential alkali-aggregate reaction expansion of lightweight aggregate concrete were investigated. Ground blast furnace slag, coal fly ash and silica fume were used as reference materials. The re- placement of cement with 25% glass powder slightly decreases the strengthes at ？ and 28 d, but shows no effect on 90 d＇s. Silica fume is very effective in improving both the strength and chloride penetration resistance, while ground glass powder is much more effective than blast furnace slag and fly ash in improving chloride penetration resistance of the concrete. When expanded shale or clay is used as coarse aggregate, the concrete containing glass powder does not exhibit deleterious expansion even if alkali-reactive sand is used as fine aggregate of the concrete.展开更多
Three different methods were applied to study the alkali content of gelpores in cement. In the closed system, the concentration of K＋, Na＋ and OH - have not reduced with the increase of age. In the open system, the ...Three different methods were applied to study the alkali content of gelpores in cement. In the closed system, the concentration of K＋, Na＋ and OH - have not reduced with the increase of age. In the open system, the diffusion and transferring of K＋ and Na＋ towards free space leads to the de-crease of total alkali content. In the micro-analysis system, the contents of K＋ and Na＋ in the first hy- drated layer of ground granulated blastfurnace slag （GBFS） are very low, while the contents of calcium and magnesium are relatively high. This phenomenon shows that the mechanism of GBFS preventing alkali aggregate reaction （AAR） is： when GBFS is dissolved by alkali medium, SiO2 and Al2O3 are dissolved into the cement matrix, then around GBFS particles form reaction rings rich in Ca2＋ and Mg^2＋, and the C-S-H gel of positive charges formed in the area repulses K＋ and Na＋, which are forced to transfer to the mortar＇s matrix, pore or mortar sample surface. The transferred K ^＋ and Na^＋ form alkali gel products with other dissolved ions, then become evenly distributed in the mortar sample and react with Ca（OH）2 in pore solutions to form （Na,K）x-2z·zCa·（SiO2）y·（OH）x gel products; and thus changes the AAR gel products＇ structure. The gel products will not expand, and so they can delay expansion destruction.展开更多
By means of 'Mortar Bar Method',the ratio of cement to aggregate was kept as a constant 1∶2.25,the water cement ratio of the mixture was 0.40,and six prism specimens were prepared for each batch of mixing pr...By means of 'Mortar Bar Method',the ratio of cement to aggregate was kept as a constant 1∶2.25,the water cement ratio of the mixture was 0.40,and six prism specimens were prepared for each batch of mixing proportions with dimensions of 10×10×60mm 3 at 38±2℃ and RH≥95%, the influences of content and particle size of active aggregate, sort and content of alkali component and type of slag on the expansion ratios of alkali activated slag cement(ASC) mortars due to alkali aggregate reaction(AAR) were studied. According to atomic absorption spectrometry,the amount of free alkali was measured in ASC mortars at 90d.The results show above factors affect AAR remarkably,but no dangerous AAR will occur in ASC system when the amount of active aggregate is below 15% and the mass fraction of alkali is not more than 5% (Na 2O).Alkali participated in reaction as an independent component, and some hydrates containing alkali cations were produced, free alkalis in ASC system can be reduced enormously.Moreover,slag is an effective inhibitor, the possibility of generating dangerous AAR in ASC system is much lower at same conditions than that in ordinary Portland cement system.展开更多
The influence of anti-freezing admixture on the alkali aggregate reaction in mortar was analyzed with accelerated methods. It is confirmed that the addition of sodium salt ingredients of anti-freezing admixture accele...The influence of anti-freezing admixture on the alkali aggregate reaction in mortar was analyzed with accelerated methods. It is confirmed that the addition of sodium salt ingredients of anti-freezing admixture accelerates the alkali silica reaction to some extent, whereas calcium salt ingredient of anti-freezing admixture reduces the expansion of alkali silica reaction caused by high alkali cement. It is found that the addition of the fly ash considerably suppresses the expansion of alkali silica reaction induced by the anti-freezing admixtures.展开更多
A calculation method for predicting the formation of alkali-silica gel and analyzing the relationship of ASR induced expansion and aggregate size was proposed. The complicated chemistry of alkali silica reaction was s...A calculation method for predicting the formation of alkali-silica gel and analyzing the relationship of ASR induced expansion and aggregate size was proposed. The complicated chemistry of alkali silica reaction was simplified to be controlled by the diffusion process of chemical ions into reactive aggregates. The transport of chemical ions was described by the Fick＇s law. The ASR induced expansion was assumed to be directly related to the volume of produced alkali-silica gel. The finally expansion of a representative volume element （RVE） of concrete was then calculated according to the ratio of volume of alkali-silica gel and RVE. The input parameters of the model contains radius of reactive aggregate, volume fraction of reactive aggregate, initial concentration of chemical ions and porosity of cement paste. The applicability of the model was validated by an experiment of ASR-affected concrete specimens containing glass aggregate. It is shown that the amount of alkali-silica gel and ASR induced expansion can be well predicted. The expansion increasing with the decreasing aggregate size can be reproduced by the proposed model.展开更多
Lightweight aggregates are increasingly used in concrete construction. They reduce concrete selfweight furnishing a structural advantage. In contrast, the mechanical properties and durability of lightweight concrete c...Lightweight aggregates are increasingly used in concrete construction. They reduce concrete selfweight furnishing a structural advantage. In contrast, the mechanical properties and durability of lightweight concrete can become the governing factor on lightweight aggregate replacement ratios. Alkali-Silica Reactison (ASR) and compressive strength of mortar samples with expanded slate, expanded glass or perlite, covering the spectrum of internal porosity and weight of lightweight aggregates, were evaluated. Scanning electron microscopy was utilized to evaluate the contribution of the aggregates’ porosity and chemical composition in inhibiting ASR. Perlite, owing to its highly porous microstructure and lower matter excelled in ASR expansion while chemical composition and denser microstructure of the heavier expanded slate resulted in more signified late ASR expansion and higher compressive strength. An attempt in visual inspection of ASR attack of alkali metal ions on silica-rich expanded glass using an ultra-accelerated exposure to sodium hydroxide solution was made</span></span><span style="font-family:Verdana;">.展开更多
研究了硅酸与KOH,NaOH以及LiOH反应后所形成产物的吸水能力,结果表明:KOH与硅酸反应后的产物的吸水能力最强,其次是 NaOH,而 LiOH与硅酸反应的产物的吸水能力最弱.通过SEM/EDS对比研究了硅质集料在 LiOH,KOH,LiOH+KOH介质中的膨胀行为,...研究了硅酸与KOH,NaOH以及LiOH反应后所形成产物的吸水能力,结果表明:KOH与硅酸反应后的产物的吸水能力最强,其次是 NaOH,而 LiOH与硅酸反应的产物的吸水能力最弱.通过SEM/EDS对比研究了硅质集料在 LiOH,KOH,LiOH+KOH介质中的膨胀行为,结果表明: LiOH-硅酸反应生成的结构致密的非膨胀性产物硅酸锂L S H包裹在未反应的集料周围,阻止了碱-硅酸反应的继续进行,而 LiOH-硅酸反应过程本身不会引起膨胀;在LiOH存在时,硅酸与KOH反应后形成的 K S H中的 K+被Li+取代生成L S H,而L S H阻碍了碱-硅酸反应的继续进行,故 LiOH能够抑制碱-硅酸反应发生膨胀.展开更多
文摘The effects of glass powder on the strength development, chloride permeability and potential alkali-aggregate reaction expansion of lightweight aggregate concrete were investigated. Ground blast furnace slag, coal fly ash and silica fume were used as reference materials. The re- placement of cement with 25% glass powder slightly decreases the strengthes at ？ and 28 d, but shows no effect on 90 d＇s. Silica fume is very effective in improving both the strength and chloride penetration resistance, while ground glass powder is much more effective than blast furnace slag and fly ash in improving chloride penetration resistance of the concrete. When expanded shale or clay is used as coarse aggregate, the concrete containing glass powder does not exhibit deleterious expansion even if alkali-reactive sand is used as fine aggregate of the concrete.
基金Funded by the German Academic Exchange Service (DAAD) for the Project A/09/00743the Science and Technology Project of Wuhan City(No.200860423208)
文摘Three different methods were applied to study the alkali content of gelpores in cement. In the closed system, the concentration of K＋, Na＋ and OH - have not reduced with the increase of age. In the open system, the diffusion and transferring of K＋ and Na＋ towards free space leads to the de-crease of total alkali content. In the micro-analysis system, the contents of K＋ and Na＋ in the first hy- drated layer of ground granulated blastfurnace slag （GBFS） are very low, while the contents of calcium and magnesium are relatively high. This phenomenon shows that the mechanism of GBFS preventing alkali aggregate reaction （AAR） is： when GBFS is dissolved by alkali medium, SiO2 and Al2O3 are dissolved into the cement matrix, then around GBFS particles form reaction rings rich in Ca2＋ and Mg^2＋, and the C-S-H gel of positive charges formed in the area repulses K＋ and Na＋, which are forced to transfer to the mortar＇s matrix, pore or mortar sample surface. The transferred K ^＋ and Na^＋ form alkali gel products with other dissolved ions, then become evenly distributed in the mortar sample and react with Ca（OH）2 in pore solutions to form （Na,K）x-2z·zCa·（SiO2）y·（OH）x gel products; and thus changes the AAR gel products＇ structure. The gel products will not expand, and so they can delay expansion destruction.
文摘By means of 'Mortar Bar Method',the ratio of cement to aggregate was kept as a constant 1∶2.25,the water cement ratio of the mixture was 0.40,and six prism specimens were prepared for each batch of mixing proportions with dimensions of 10×10×60mm 3 at 38±2℃ and RH≥95%, the influences of content and particle size of active aggregate, sort and content of alkali component and type of slag on the expansion ratios of alkali activated slag cement(ASC) mortars due to alkali aggregate reaction(AAR) were studied. According to atomic absorption spectrometry,the amount of free alkali was measured in ASC mortars at 90d.The results show above factors affect AAR remarkably,but no dangerous AAR will occur in ASC system when the amount of active aggregate is below 15% and the mass fraction of alkali is not more than 5% (Na 2O).Alkali participated in reaction as an independent component, and some hydrates containing alkali cations were produced, free alkalis in ASC system can be reduced enormously.Moreover,slag is an effective inhibitor, the possibility of generating dangerous AAR in ASC system is much lower at same conditions than that in ordinary Portland cement system.
文摘The influence of anti-freezing admixture on the alkali aggregate reaction in mortar was analyzed with accelerated methods. It is confirmed that the addition of sodium salt ingredients of anti-freezing admixture accelerates the alkali silica reaction to some extent, whereas calcium salt ingredient of anti-freezing admixture reduces the expansion of alkali silica reaction caused by high alkali cement. It is found that the addition of the fly ash considerably suppresses the expansion of alkali silica reaction induced by the anti-freezing admixtures.
基金Funded by the Major state Basic Research Development Program of China (973 Program) (No. 2009CB623203)
文摘A calculation method for predicting the formation of alkali-silica gel and analyzing the relationship of ASR induced expansion and aggregate size was proposed. The complicated chemistry of alkali silica reaction was simplified to be controlled by the diffusion process of chemical ions into reactive aggregates. The transport of chemical ions was described by the Fick＇s law. The ASR induced expansion was assumed to be directly related to the volume of produced alkali-silica gel. The finally expansion of a representative volume element （RVE） of concrete was then calculated according to the ratio of volume of alkali-silica gel and RVE. The input parameters of the model contains radius of reactive aggregate, volume fraction of reactive aggregate, initial concentration of chemical ions and porosity of cement paste. The applicability of the model was validated by an experiment of ASR-affected concrete specimens containing glass aggregate. It is shown that the amount of alkali-silica gel and ASR induced expansion can be well predicted. The expansion increasing with the decreasing aggregate size can be reproduced by the proposed model.
文摘Lightweight aggregates are increasingly used in concrete construction. They reduce concrete selfweight furnishing a structural advantage. In contrast, the mechanical properties and durability of lightweight concrete can become the governing factor on lightweight aggregate replacement ratios. Alkali-Silica Reactison (ASR) and compressive strength of mortar samples with expanded slate, expanded glass or perlite, covering the spectrum of internal porosity and weight of lightweight aggregates, were evaluated. Scanning electron microscopy was utilized to evaluate the contribution of the aggregates’ porosity and chemical composition in inhibiting ASR. Perlite, owing to its highly porous microstructure and lower matter excelled in ASR expansion while chemical composition and denser microstructure of the heavier expanded slate resulted in more signified late ASR expansion and higher compressive strength. An attempt in visual inspection of ASR attack of alkali metal ions on silica-rich expanded glass using an ultra-accelerated exposure to sodium hydroxide solution was made</span></span><span style="font-family:Verdana;">.
文摘研究了硅酸与KOH,NaOH以及LiOH反应后所形成产物的吸水能力,结果表明:KOH与硅酸反应后的产物的吸水能力最强,其次是 NaOH,而 LiOH与硅酸反应的产物的吸水能力最弱.通过SEM/EDS对比研究了硅质集料在 LiOH,KOH,LiOH+KOH介质中的膨胀行为,结果表明: LiOH-硅酸反应生成的结构致密的非膨胀性产物硅酸锂L S H包裹在未反应的集料周围,阻止了碱-硅酸反应的继续进行,而 LiOH-硅酸反应过程本身不会引起膨胀;在LiOH存在时,硅酸与KOH反应后形成的 K S H中的 K+被Li+取代生成L S H,而L S H阻碍了碱-硅酸反应的继续进行,故 LiOH能够抑制碱-硅酸反应发生膨胀.
