期刊文献+
共找到422篇文章
< 1 2 22 >
每页显示 20 50 100
MgO–SBA-15 Supported Pd–Pb Catalysts for Oxidative Esterification of Methacrolein with Methanol to Methyl Methacrylate 被引量:4
1
作者 姜丽 刁琰琰 +3 位作者 韩军兴 闫瑞一 张香平 张锁江 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2014年第10期1098-1104,共7页
Novel Mg O–SBA-15 supported catalysts were prepared for oxidative esterification of methacrolein(MAL) with methanol to methyl methacrylate(MMA). The Mg O–SBA-15 supports were synthesized with different magnesia load... Novel Mg O–SBA-15 supported catalysts were prepared for oxidative esterification of methacrolein(MAL) with methanol to methyl methacrylate(MMA). The Mg O–SBA-15 supports were synthesized with different magnesia loadings from different magnesium precursors and hydrochloric acid molar concentrations. The Mg O–SBA-15 supports and Pd–Pb/Mg O–SBA-15 catalysts were characterized by several analysis methods. The results revealed that the addition of Mg O improved the ordered structure of SBA-15 supports and provided surface alkalinity of SBA-15 supports. The average size of the Pd3 Pb particles on magnesia-modified Pd–Pb/Mg O–SBA-15 catalysts was smaller than that on the pure silica-based Pd–Pb/SBA-15 catalysts. The experiments on catalyst performance showed that the magnesia-modified Pd–Pb/Mg O–SBA-15 catalysts had higher activity than pure silica-based Pd–Pb/SBA-15 catalysts, showing the strong dependence of catalytic activity on the average size of active particles. The difference of activity between Pd–Pb/SBA-15 catalysts and Pd–Pb/Mg O–SBA-15 catalysts was due to the discrepant structural properties and surface alkalinity provided by Mg O, which led to the different Pd3 Pb particle sizes and then resulted in the different number of active sites. Besides magnesia loadings, other factors, such as hydrochloric acid molar concentration and magnesium precursors, had considerable influences on the catalytic activity. 展开更多
关键词 METHACROLEIN methyl METHACRYLATE Oxidative esterification Pd–Pb BIMETAL SBA-15
下载PDF
Oxidative Esterification of Methacrolein to Methyl Methacrylate over Supported Palladium Catalyst 被引量:3
2
作者 Wei ZHAO Wei Guo CHENG +3 位作者 Zeng Xi LI Lei WANG Xiang Ping ZHANG Suo Jiang ZHANG 《Chinese Chemical Letters》 SCIE CAS CSCD 2006年第6期739-742,共4页
Supported palladium catalysts, which were used in the oxidative esterification of methacrolein to methyl methacrylate, have been prepared with different carriers and Pd precursors. Experimental results revealed that P... Supported palladium catalysts, which were used in the oxidative esterification of methacrolein to methyl methacrylate, have been prepared with different carriers and Pd precursors. Experimental results revealed that Pd catalysts with r-Al2O3 support and Na2PdC14 precursor showed good performance. Pd catalyst modified with Pb and Mg indicated that Pd-Mg bimetallic catalyst exhibited considerably higher activity and Pd-Pb exhibited both higher activity and selectivity. 92.27% methacrolein conversion and 90.57% methyl methacrylate selectivity were obtained on Pd-Pb-Mg catalyst. 展开更多
关键词 Oxidative esterification METHACROLEIN methyl methylcralate PALLADIUM alumina.
下载PDF
The Intermetallic Catalysts for Oxidative Esterification of Methacrolein to Methyl Methacrylate 被引量:2
3
作者 董海锋 李增喜 +3 位作者 王正平 赵威 刁琰琰 张锁江 《过程工程学报》 CAS CSCD 北大核心 2006年第4期661-665,共5页
A series of supported intermetallic Pb-Pb catalysts were prepared with the impregnation method by changing the support(silica,molecular sieve or γ-alumina)and the pore size.The chemical states of the two metals were ... A series of supported intermetallic Pb-Pb catalysts were prepared with the impregnation method by changing the support(silica,molecular sieve or γ-alumina)and the pore size.The chemical states of the two metals were characterized by XPS analysis,the process for producing methyl methacrylate based on the direct oxidative esterification of methacrolein with methanol in the presence of oxygen was performed in a slurry reactor with the above-mentioned catalysts.The influence of the calcination temperature and the kinds of support as well as the pore size on catalytic activity had been extensively investigated.Under the conditions of temperature at 80℃,catalyst 3.8%(ω)and the reaction time 2 h,the conversion rate of methacrolein reached 85%,the selectivity and the yield of methyl methacrylate were 90% and 76.5%,respectively. 展开更多
关键词 methyl METHACRYLATE METHACROLEIN Pd-Pb catalyst oxidative esterification
下载PDF
Liquid-phase esterification of methacrylic acid with methanol catalyzed by cation-exchange resin in a fixed bed reactor:Experimental and kinetic studies
4
作者 Junyang Liu Luming Wang +3 位作者 Yuhang Bian Chunshan Li Zengxi Li Jie Li 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2023年第6期1-10,共10页
The kinetic behavior of esterification between methacrylic acid and methanol catalyzed by NKC-9 resin was studied in a fixed bed reactor.The reaction was conducted in the temperature range of 323.15 to 368.15 K with t... The kinetic behavior of esterification between methacrylic acid and methanol catalyzed by NKC-9 resin was studied in a fixed bed reactor.The reaction was conducted in the temperature range of 323.15 to 368.15 K with the molar ratio of reactants from 0.8 to 1.4 under certain pressure.The measurement data were regression with the pseudo-homogeneous(P-H),Eley-Rideal(E-R),and Langmuir-Hinshelwood(L-H)heterogeneous kinetic models.Independent adsorption experiments were implemented to gain the adsorption equilibrium constants of four components.Among the above three models,the L-H model exhibited the best fitting results.The stability of NKC-9 was evaluated by long-term running with the yield of methyl methacrylate no decrease during 3000 h operation.The structure and physicochemical properties of the new and used catalyst were performed by several characterizations including thermogravimetric analysis(TG),scanning electron microscope(SEM),X-ray diffraction(XRD)and Fourier transform infrared spectroscopy(FT-IR)and so on. 展开更多
关键词 Kinetics esterification methyl methacrylate Cation-exchange resin Fix bed reactor
下载PDF
An Efficient One-step Methyl Esterification of Carboxylic Acid and Deacetylation of Alcohol under BF_3·OEt_2-MeOH 被引量:1
5
作者 Shou Fu LU Qin Qin OUYANG +2 位作者 Zhong Wu GUO Biao YU and Yong Zheng HUI(State Key Laboratory of Bioorganic and Natural Products Chemistry,Shanghai Institute of Organic Chemistry, Academia Sinica, Shanghal 200032) 《Chinese Chemical Letters》 SCIE CAS CSCD 1997年第10期843-844,共2页
An efficient one-step methyl esterification of carboxylic acid and deacetylation of alcohol under BF3O·Et2-MeOH was developed.
关键词 BF An Efficient One-step methyl esterification of Carboxylic Acid and Deacetylation of Alcohol under BF3 OEt2-MeOH
下载PDF
Kinetics of Esterification of 2-Keto-L-Gulonic Acid with Methanol Catalyzed by Cation Exchange Resin 被引量:4
6
作者 许保云 郑学明 +3 位作者 张卫江 张雪梅 张智勇 尚会建 《Transactions of Tianjin University》 EI CAS 2008年第1期37-42,共6页
The kinetics of esterification of 2-keto-L-gulonic acid with methanol in the liquid phase catalyzed by cation exchange resin, D001, was studied. The experiments were carried out in a stirred batch reactor at 318, 323,... The kinetics of esterification of 2-keto-L-gulonic acid with methanol in the liquid phase catalyzed by cation exchange resin, D001, was studied. The experiments were carried out in a stirred batch reactor at 318, 323, 328, 333, 338, 341 K under atmospheric pressure. It is found that the speed of rotating rate has no effect on the esterification rate in the range of 300-500 r/min and the effect of internal mass transfer resistance is not obvious. The effects of temperature and catalyst loading on the reaction rate were researched under the condition of eliminating the effect of diffusion. The rate was found to increase with the increase of the temperature and catalyst loading. The experimental data were correlated with a kinetic model based on the pseudo-homogeneous catalysis. The kinetic equation for describing the reaction catalyzed by cation exchange resin was developed. The experimental data are in good agreement with the model. 展开更多
关键词 2-keto-L-gulonic acid METHANOL esterification methyl 2-keto-L-gulonate cationexchange resin pseudo-homogeneous model
下载PDF
Insights into the Reaction Network and Mechanism of Green Aerobic Oxidative Esterification of Methacrolein over Different Heterogeneous Catalysts 被引量:1
7
作者 Li Chenhao Xia Changjiu +7 位作者 Liu Yujia Huang Kaimeng Peng Xinxin Liu Jinsheng Lin Min Zhu Bin Luo Yibin Shu Xingtian 《China Petroleum Processing & Petrochemical Technology》 SCIE CAS 2021年第3期1-11,共11页
The oxidative esterification of methacrolein(MAL)is an important way to prepare high-valued methyl methacrylate(MMA),but this process is ultra-complex due to the high reactivity of both C=O and C=C bonds in MAL molecu... The oxidative esterification of methacrolein(MAL)is an important way to prepare high-valued methyl methacrylate(MMA),but this process is ultra-complex due to the high reactivity of both C=O and C=C bonds in MAL molecule.In order to further improve MMA selectivity,the reaction network and relevant mechanisms have been proposed and profoundly investigated in this paper.Five kinds of fundamental reactions are involved in this process,including(a)the acetal reaction;(b)the aerobic oxidation of hemiacetal;(c)the alkoxylation of C=C double bond;(d)the Diels-Alder reaction;and(e)the hydrogenation reaction of unsaturated double bond.Among them,the Diels-Alder reaction of MAL is non-catalyzed,and the Brönsted acid sites or the Lewis acid sites favor promoting acetal reaction of MAL with methanol,while the alkoxylation of C=C bond with methanol is enhanced under alkaline condition.In particular,by employing the Pd-based catalysts,hydrogenation products are formed in alkaline methanol solution,hence with lower than those obtained by the Au-based catalysts.Notably,it is necessary to match the hemiacetal fromation and aerobic oxidation of hemiacetal,which is relevant with the amount and strength of acid and redox sites.Consequently,this work can provide a good guidance for the further design of both catalysts and processes in future. 展开更多
关键词 METHACROLEIN oxidative esterification MECHANISM reaction network methyl methacrylate
下载PDF
气相色谱法测定猪肉脂肪的脂肪酸方法优化 被引量:1
8
作者 张根生 黄昕钰 +3 位作者 刘志彬 李琪 韩冰 费英敏 《粮食与油脂》 北大核心 2024年第2期159-162,共4页
比较在3种程序升温条件下的37种混合脂肪酸甲酯标准品的谱图,确定最适合分析猪肉脂肪的脂肪酸的程序升温条件;比较索氏提取法、酸水解辅助提取法、有机溶剂浸提法、超声波辅助提取法提取猪肉脂肪,确定最佳猪肉脂肪提取方法;比较碱法甲... 比较在3种程序升温条件下的37种混合脂肪酸甲酯标准品的谱图,确定最适合分析猪肉脂肪的脂肪酸的程序升温条件;比较索氏提取法、酸水解辅助提取法、有机溶剂浸提法、超声波辅助提取法提取猪肉脂肪,确定最佳猪肉脂肪提取方法;比较碱法甲酯化、酸法甲酯化、碱皂化酸酯化法、碱皂化三氟化硼酯化法对猪肉脂肪的脂肪酸进行甲酯化处理,确定最佳甲酯化方法。结果表明:最适合分析猪肉脂肪的脂肪酸的程序升温条件为在初始温度140℃条件下保持5 min,以5℃/min升温至220℃保持15 min;最佳提取方法是超声波辅助提取法;最佳甲酯化方法是碱法甲酯化。 展开更多
关键词 猪肉 脂肪酸 提取方法 甲酯化方法
下载PDF
正交法设计乙酸甲酯制备的教学实验
9
作者 莫琰 姚添壹 +3 位作者 许怡璇 史津赫 陈彤彤 谭大志 《实验室科学》 2024年第3期39-42,共4页
介绍了应用正交法设计乙酸甲酯制备教学实验的方法,分析了醇酸摩尔比、催化剂用量、分馏柱长度这三个因素对乙酸甲酯收率的影响,筛选出制备的最佳实验条件为醇酸摩尔比为1.3∶1,催化剂用量为1.5 mL,分馏柱长度30 cm,实现以较少的试验次... 介绍了应用正交法设计乙酸甲酯制备教学实验的方法,分析了醇酸摩尔比、催化剂用量、分馏柱长度这三个因素对乙酸甲酯收率的影响,筛选出制备的最佳实验条件为醇酸摩尔比为1.3∶1,催化剂用量为1.5 mL,分馏柱长度30 cm,实现以较少的试验次数达到与全面试验相近的结果。在化学实验教学时,将实验操作训练与数据处理知识相结合,不仅提高了学生的学习兴趣,还让他们更好地理解实验设计思想,培养了他们分析问题和解决问题的实践能力和创新能力,取得了良好的教学效果。 展开更多
关键词 正交设计 乙酸甲酯 酯化反应 教学
下载PDF
哌嗪型双核酸性离子液体催化合成苯甲酸甲酯
10
作者 李祥 尹慧 +1 位作者 旷宇阳 刘宁 《日用化学工业(中英文)》 CAS 北大核心 2024年第5期514-519,共6页
以1,4-二甲基哌嗪为原料,通过与1,3-丙磺酸内酯加成反应合成中间体,再进一步分别与对甲苯磺酸、浓硫酸(H_(2)SO_(4))、甲烷磺酸等质子酸发生离子交换等反应,最终合成一系列磺酸功能化哌嗪类离子液体,其中1,4-双[N-甲基-N-(3-磺丙基)]哌... 以1,4-二甲基哌嗪为原料,通过与1,3-丙磺酸内酯加成反应合成中间体,再进一步分别与对甲苯磺酸、浓硫酸(H_(2)SO_(4))、甲烷磺酸等质子酸发生离子交换等反应,最终合成一系列磺酸功能化哌嗪类离子液体,其中1,4-双[N-甲基-N-(3-磺丙基)]哌嗪对甲苯磺酸盐([BMSP][PSA])在苯甲酸-甲醇酯化反应中显示出相对较优的催化活性,并通过FT-IR,^(1)H-NMR和TGA-DTG对其的结构与性能进行表征,确定了所合成的离子液体结构,且其具有较好的耐热性。结果表明:在醇酸摩尔比为16∶1、反应温度为70℃、反应时间为3 h、[BMSP][PSA]用量为3 mmol的条件下,苯甲酸转化率达到最大值97.6%,且在重复使用催化剂5次后,苯甲酸转化率仍然可达93.9%,显示了优异的催化活性,是一种可应用于工业化生产苯甲酸甲酯的绿色催化剂。 展开更多
关键词 离子液体 酯化反应 苯甲酸甲酯 1 4-二甲基哌嗪
下载PDF
离子液体催化合成巯基丙酸甲酯的性能分析及表征
11
作者 张莹莹 宫小惠 +1 位作者 明宏如 刘说 《现代化工》 CAS CSCD 北大核心 2024年第5期118-121,共4页
采用一步法合成吡咯烷酮-硫酸离子液体催化剂,利用红外光谱仪、液相色谱仪、热重分析仪、核磁共振氢谱等对其进行表征。研究了该离子液体对甲醇与巯基丙酸酯化反应的催化性能,并与传统浓硫酸催化剂的催化性能进行比较。结果表明,合成物... 采用一步法合成吡咯烷酮-硫酸离子液体催化剂,利用红外光谱仪、液相色谱仪、热重分析仪、核磁共振氢谱等对其进行表征。研究了该离子液体对甲醇与巯基丙酸酯化反应的催化性能,并与传统浓硫酸催化剂的催化性能进行比较。结果表明,合成物质为[Hnhp]HSO_(4)离子液体且纯度为96%;与传统浓硫酸催化剂相比,以[Hnhp]HSO_(4)离子液体为催化剂时反应时间短,产品的收率高于浓硫酸催化剂产品收率约5%;[Hnhp]HSO_(4)离子液体重复10次试验后,催化剂性能没有降低,且产品收率在85%左右。 展开更多
关键词 离子液体 酯化反应 催化作用 巯基丙酸甲酯 吡咯烷酮
下载PDF
气相色谱-氢火焰离子化测定脂肪酸甲酯的响应机理与定量规律
12
作者 崔华玲 杨慧 +7 位作者 孙丽华 叶倩 丁晨红 王威利 季天荣 马蕾 曾坤宏 殷秋妙 《食品科学》 EI CAS CSCD 北大核心 2024年第13期49-57,共9页
针对国内外现行标准中气相色谱-氢火焰离子化检测器(gas chromatography-flame ionization detector,GCFID)测定脂肪酸甲酯(fatty acid methyl esters,FAME)定量方法的不足,本实验通过理论推导和实验验证,从仪器、色谱柱、分流比、标准... 针对国内外现行标准中气相色谱-氢火焰离子化检测器(gas chromatography-flame ionization detector,GCFID)测定脂肪酸甲酯(fatty acid methyl esters,FAME)定量方法的不足,本实验通过理论推导和实验验证,从仪器、色谱柱、分流比、标准物质方面系统研究利用GC-FID分析37种FAME的响应规律、理论模型及实验干扰因素,提出“质量系数”和“关联因子”概念,揭示实验关联因子(experimental relevance factors,FF_(E))和理论关联因子(theoretical relevance factors,FF_(T))的函数关系和等值性条件,并经多个实验证实了关联因子的稳定性,发现当脂肪酸碳数大于10时,可充分利用理论质量系数(theoretical quality coefficient,QC_(T))和FFT对FAME进行相对或绝对定量;当脂肪酸碳数小于10时,可以通过现配FAME标准物质等方法精确测定实验质量系数(experimental quality coefficient,QC_(E))和实验关联因子FFE,并用此校正FAME的量进行定量,不仅能够提高定量结果的准确性,而且能够增加标准物质的使用时效以及节省标准物质的使用量。 展开更多
关键词 脂肪酸甲酯 甲酯化 气相色谱-氢火焰离子化检测 质量系数 关联因子
下载PDF
微囊型脂肪粉油脂的常规甲酯化方法优化
13
作者 孙丽华 王勇 +3 位作者 丁为国 韩冬月 谭淑君 殷秋妙 《饲料研究》 CAS 北大核心 2024年第17期133-137,共5页
试验旨在优化微囊型脂肪粉油脂的甲酯化方法。采用酸解法和石油醚萃取法从试样中提取油脂,取50 mg油脂于耐压瓶中,加入2 mL 0.2 mol/L氢氧化钠-甲醇溶液在65℃条件下超声水浴,皂化完成后以酚酞指示,利用1 mol/L硫酸-甲醇溶液中和至酚酞... 试验旨在优化微囊型脂肪粉油脂的甲酯化方法。采用酸解法和石油醚萃取法从试样中提取油脂,取50 mg油脂于耐压瓶中,加入2 mL 0.2 mol/L氢氧化钠-甲醇溶液在65℃条件下超声水浴,皂化完成后以酚酞指示,利用1 mol/L硫酸-甲醇溶液中和至酚酞无色,加入300μL硫酸-甲醇溶液,70℃超声水浴5 min,加饱和氯化钠水溶液分离,利用异辛烷萃取脂肪酸甲酯无水硫酸钠除水,采用气相色谱-火焰离子化检测器(GC-FID)测定,考察方法的精密度、准确度、检测限和定量限。结果显示,优化后方法测定大豆油标准物质GBW(E)100120的各种脂肪酸结果与标准值一致,精密度相对标准偏差(RSD)为1.25%。实验室间的比对结果显示:该方法甲酯化率达95%,重复性误差限RSD为2.71%,再现性误差限RSD为4.86%;反式油酸/反式亚油酸的检测限和定量限分别为0.004%、0.011%。研究表明,试验所用方法具有高效、精准和环保的优点,可为油脂产业的发展和今后的标准修订提供参考。 展开更多
关键词 微囊型脂肪粉 脂肪酸 甲酯化 气相色谱-火焰离子化检测器
下载PDF
温和反应条件下进行的高效邻氯扁桃酸甲酯化反应
14
作者 徐洪伍 刘敏妍 +6 位作者 宋剑平 吴怡琳 籍肇朴 王永利 张晏榕 陈俊豪 林坚锐 《肇庆学院学报》 2024年第5期72-77,共6页
邻氯扁桃酸甲酯是合成手性药物氯吡格雷的重要中间体之一.其传统制备工艺是以邻氯扁桃酸为起始原料在硫酸及回流温度条件下经酯化反应制得.研究以相对温和的硼酸作为催化剂在常温条件下催化邻氯扁桃酸与甲醇进行的酯化反应.采用FT-IR、1... 邻氯扁桃酸甲酯是合成手性药物氯吡格雷的重要中间体之一.其传统制备工艺是以邻氯扁桃酸为起始原料在硫酸及回流温度条件下经酯化反应制得.研究以相对温和的硼酸作为催化剂在常温条件下催化邻氯扁桃酸与甲醇进行的酯化反应.采用FT-IR、1H NMR、13C NMR及HRMS对产物结构进行鉴定.探讨催化剂用量、投料比、温度、反应时间对反应的影响.并针对该反应的特点对反应装置进行改进,实现连续化制备邻氯扁桃酸甲酯. 展开更多
关键词 邻氯扁桃酸甲酯 邻氯扁桃酸 硼酸 酯化反应
下载PDF
α-羟基丁酸甲酯合成工艺研究
15
作者 聂少春 代飞 +1 位作者 袁鹏 李玉军 《黑龙江科学》 2024年第4期26-29,共4页
对正丁酸制备α-羟基丁酸甲酯的合成工艺进行研究,针对氯化、碱解、酸化、酯化合成产物的反应过程分析各种物料用量、反应温度及时间等影响因素,考察中间产物及成品的稳定性,得出优化工艺条件。
关键词 正丁酸 α-羟基丁酸甲酯 α-氯化 酯化
下载PDF
SYNTHESIS AND CHARACTERIZATION OF A NEW COMBLIKE POLYMER BASED ON POLY (VINYL METHYL ETHER-ALT-MALEIC ANHYDRIDE) BACKBONE
16
作者 丁黎明 林云青 +2 位作者 周子南 倪建龙 陈东霖 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 1995年第3期264-272,共9页
A new comblike polymer host for polymer electrolyte was synthesized by reacting monomethyl ether of poly(ethylene glycol) with poly(vinyl methyl ether-alt-maleic anhydride) and endcapping the residual carboxylic acid ... A new comblike polymer host for polymer electrolyte was synthesized by reacting monomethyl ether of poly(ethylene glycol) with poly(vinyl methyl ether-alt-maleic anhydride) and endcapping the residual carboxylic acid with methanol. Butanone was selected as a solvent for the esterification in order to obtain a completely soluble product. The synthesis process was traced through by LR. Compared with the model compounds, the presumed structure of this comblike polymer has been proved to be valid by C-13 NMR The comb polymer is a white rubbery solid. It can be dissolved in butanone and THF, and manifests good film forming ability. 展开更多
关键词 COMB-LIKE POLYMER POLY (VINYL methyl ETHER-ALT-MALEIC ANHYDRIDE) esterification POLYMER ELECTROLYTES IR SPECTRA C-13 NMR SPECTRA
下载PDF
响应面法优化碱催化亮斑扁角水虻幼虫虫脂制备生物柴油工艺 被引量:3
17
作者 彭乔烽 张栋 +4 位作者 马小梅 刘高强 丁功涛 周雪雁 皮尔·穆罕默德·阿卜杜勒 《中国油脂》 CAS CSCD 北大核心 2023年第4期69-74,共6页
为实现亮斑扁角水虻幼虫(Black soldier fly larvae, BSFL)虫脂能源化利用,采用石油醚提取BSFL虫脂,通过碱催化BSFL虫脂甲酯化制备生物柴油。在单因素试验的基础上,利用响应面试验设计优化BSFL虫脂合成生物柴油的工艺条件;使用气质联用... 为实现亮斑扁角水虻幼虫(Black soldier fly larvae, BSFL)虫脂能源化利用,采用石油醚提取BSFL虫脂,通过碱催化BSFL虫脂甲酯化制备生物柴油。在单因素试验的基础上,利用响应面试验设计优化BSFL虫脂合成生物柴油的工艺条件;使用气质联用仪分析生物柴油的脂肪酸组成,并评价生物柴油性能。结果表明:BSFL虫脂合成生物柴油的最优工艺条件为醇油体积比7.2∶1、反应时间2.0 h、KOH添加量为反应体系总质量的1.0%,在此条件下生物柴油产率达93.7%;生物柴油主要脂肪酸组分及含量为C12∶0 12.8%、C14∶0 3.8%、C16∶0 16.2%、C16∶1 1.9%、C18∶0 4.4%、C18∶1 24.2%、C18∶2 26.8%、C18∶3 4.1%;生物柴油运动黏度(40℃) 3.842 5 mm^(2)/s、运动黏度(25℃) 5.311 mm^(2)/s、动力黏度(25℃) 4.640 mPa·s、密度(25℃) 874 kg/m^(3)、密度(15℃) 879 kg/m^(3)、酸值(KOH) 0.12 mg/g、硫含量26 mg/kg、开口闪点160℃、闭口闪点142℃、残炭小于0.10%。碱催化BSFL虫脂甲酯化制备生物柴油的C14~C18含量较高,性能较好。 展开更多
关键词 亮斑扁角水虻幼虫 虫脂 生物柴油 甲酯化 响应面法优化
下载PDF
Au/Sn-deAl-β的制备及其催化甘油氧化酯化的性能研究
18
作者 贾豪强 李馨 +2 位作者 孙培永 姚志龙 张胜红 《现代化工》 CAS CSCD 北大核心 2023年第6期188-192,199,共6页
以SnCl_(4)接枝的脱铝β分子筛(Sn-deAl-β)为载体,采用沉积-沉淀(DP)法制备了不同Au质量分数的Au/Sn-deAl-β催化剂;利用XRD、XRF、N_(2)物理吸附和NH_(3)-TPD对Au/Sn-deAl-β进行表征,并考察了催化剂制备方法、组成、结构和反应条件... 以SnCl_(4)接枝的脱铝β分子筛(Sn-deAl-β)为载体,采用沉积-沉淀(DP)法制备了不同Au质量分数的Au/Sn-deAl-β催化剂;利用XRD、XRF、N_(2)物理吸附和NH_(3)-TPD对Au/Sn-deAl-β进行表征,并考察了催化剂制备方法、组成、结构和反应条件对甘油氧化酯化制备乳酸甲酯性能的影响。结果表明,Si/Al摩尔比为510、Au理论质量分数为1%且DP过程中pH为9.00的条件下制备的Au/Sn-deAl-β催化剂具有最高的乳酸甲酯选择性;Au/Sn-deAl-β催化剂兼具氧化脱氢位点和Lewis酸中心,能够高选择性地实现甘油氧化酯化制备乳酸甲酯。此外,甘油氧化酯化的产物与Au颗粒尺寸和催化剂酸性密切相关,小尺寸的Au颗粒相对有利于甘油酸甲酯和乙醇酸甲酯的生成。 展开更多
关键词 甘油 氧化酯化 乳酸甲酯 催化
下载PDF
猪肉脂肪酸碱法甲酯化工艺优化及其脂肪酸组成分析
19
作者 潘雷 刘志彬 +3 位作者 李月明 倪雪 王军茹 张根生 《食品研究与开发》 CAS 北大核心 2023年第14期132-139,共8页
基于气相色谱分析法,对经超声波辅助提取法提取后的猪肉脂肪酸进行碱法甲酯化处理。以猪肉脂肪酸中油酸含量为评价指标,进行单因素试验,并采用Box-Behnken响应面法优化碱法甲酯化工艺条件,获得最优的碱法甲酯化条件。结果表明:甲酯化时... 基于气相色谱分析法,对经超声波辅助提取法提取后的猪肉脂肪酸进行碱法甲酯化处理。以猪肉脂肪酸中油酸含量为评价指标,进行单因素试验,并采用Box-Behnken响应面法优化碱法甲酯化工艺条件,获得最优的碱法甲酯化条件。结果表明:甲酯化时间19.6 min、甲酯化温度69.5℃、酯化剂添加量6.8 mL,此条件下得到油酸含量为46.74%,该工艺条件下得到的猪肉脂肪酸分离效果较好,且猪肉脂肪酸组成种类最多,达到17种,含量较多的脂肪酸为油酸(C18∶1)、棕榈酸(C16∶0),硬脂酸(C18∶0)、反亚油酸(C18∶2TT)、棕榈油酸(C16∶1)、月桂酸(C12∶0)含量分别为47.395%、22.433%、15.111%、4.040%、2.982%、1.645%。 展开更多
关键词 气相色谱 脂肪酸提取 碱法甲酯化 工艺优化 特征脂肪酸
下载PDF
射频等离子体辅助制备S_(2)O_(8)^(2-)/CeO_(2)固体超强酸催化剂的研究 被引量:1
20
作者 王凯强 张旭东 +5 位作者 许德鑫 黄邦斗 朱长辉 田保河 李秀兰 朱文超 《现代化工》 CAS CSCD 北大核心 2023年第9期189-193,199,共6页
以商用CeO_(2)为载体,采用过量浸渍法浸渍(NH_(4))_(2)S_(2)O_(8)溶液,用射频等离子体以辉光放电形式辅助制备了S_(2)O_(8)^(2-)/CeO_(2)-RF固体超强酸催化剂。利用XRD、SEM、BET、FT-IR、Py-IR等对催化剂的孔结构、键结合方式、微观形... 以商用CeO_(2)为载体,采用过量浸渍法浸渍(NH_(4))_(2)S_(2)O_(8)溶液,用射频等离子体以辉光放电形式辅助制备了S_(2)O_(8)^(2-)/CeO_(2)-RF固体超强酸催化剂。利用XRD、SEM、BET、FT-IR、Py-IR等对催化剂的孔结构、键结合方式、微观形貌、酸量及酸性质等进行了表征。通过色氨酸与甲醇的酯化反应评价了S_(2)O_(8)^(2-)/CeO_(2)-RF固体超强酸催化剂的活性。结果表明,与传统600℃焙烧法相比,射频辉光放电等离子体辅助制备的催化剂比表面积大、颗粒分散、酸量高、反应速率快。在反应温度为150℃、反应压力为1 MPa的条件下,S_(2)O_(8)^(2-)/CeO_(2)-RF催化剂上色氨酸甲酯的产率为82%,并且在1.5 h后反应趋近平衡。 展开更多
关键词 射频等离子体 固体超强酸催化剂 氧化铈 酯化反应 色氨酸甲酯
下载PDF
上一页 1 2 22 下一页 到第
使用帮助 返回顶部