Regional Tectonic Transformation in East Kunlun Orogenic Belt in Early Paleozoic: Constraints from the Geochronology and Geochemistry of Helegangnaren Alkali-feldspar Granite

The Helegangnaren feldspar granite exposed in the eastern part of East Kunlun, is characterized by high concentrations of SiO2 and alkaline, low abundances of Fe, Mg and Ca, metaluminous-weak peraluminous. Trace elements analysis shows that the granite is depleted extremely in Ba, Sr and Eu, and rich in some large-ion lithophile elements and high field strength elements. Besides, the granite has high Ga contents, the values of 104（Ga/AI） vary from 2.50 to 2.77, which is mainly greater than the lower limit of A-type granites （2.6）, and is higher than the I- and S- type granites＇ average （2.1 and 2.28, respectively）. Rare earth element （REE） is characterized by relatively high fractionations of light REE （LREE） and heavy REE （HREE） （LREE/HREE=9.3-13.60, （La/Yb）N=10.92-18.02）, pronounced negative Eu anomalies （JEn=0.08-0.13）, and exhibits right- dipping gull pattern. Major elements, rare elements and trace elements features show the granite is ascribed to A-type granite and A2 subtype in tectonic genetic type. They are plotted into post-collision or within-plate area in a variety of tectonic discriminations. Geological and geochemical data comprehensively suggest that the granite is formed in a post-collision extensive tectonic setting. Laser ablation inductively coupled plasma mass spectrometry （LA-ICP-MS） zircon U-Pb dating yields a weighted mean age of 425 Ma, belonging to Middle Silurian, which is similar to the age of the post- collision geological events in the region. The differences of magmatic rocks in formation age, rocks assemblage and rocks series systematically indicate that the regional tectonic stress regime in the East Kunlun orogenic belt experienced a major transformation from compress to extension in Middle Silurianin, and the Helegangnaren feldspar granite intruded in the early stage of tectonic transformation.

Numerical simulation of microwave-induced cracking and melting of granite based on mineral microscopic models

This study introduces a coupled electromagnetic–thermal–mechanical model to reveal the mechanisms of microcracking and mineral melting of polymineralic rocks under microwave radiation.Experimental tests validate the rationality of the proposed model.Embedding microscopic mineral sections into the granite model for simulation shows that uneven temperature gradients create distinct molten,porous,and nonmolten zones on the fracture surface.Moreover,the varying thermal expansion coefficients and Young's moduli among the minerals induce significant thermal stress at the mineral boundaries.Quartz and biotite with higher thermal expansion coefficients are subjected to compression,whereas plagioclase with smaller coefficients experiences tensile stress.In the molten zone,quartz undergoes transgranular cracking due to theα–βphase transition.The local high temperatures also induce melting phase transitions in biotite and feldspar.This numerical study provides new insights into the distribution of thermal stress and mineral phase changes in rocks under microwave irradiation.

Geochronology and Geochemistry of the Xingxingxia Triassic A-type Granites in Central Tianshan,NW China:Petrogenesis and Tectonic Implications

The Triassic granitoids in Central Tianshan play a key role in determining the petrogenesis and tectonic evolution on the southern margin of the Central Asian orogenic belt.In this study,we present SHRIMP zircon U-Pb ages,Hf isotopic and geochemical data on the Xingxingxia biotite granite,amazonite granite and granitic pegmatite in Central Tianshan,NW China.Zircon U-Pb dating yielded formation ages of 242 Ma for the biotite granite and 240 Ma for the amazonite granite.These granitoid rocks have high K_(2)O with low MgO and CaO contents.They are enriched in Nb,Ta,Hf and Y,while being depleted in Ba and Sr,showing flat HREE patterns and negative Eu anomalies.They have typical A-type granite geochemical signatures with high Ga/A_(1)(8–13)and TFeO/(TFeO+MgO)ratios,showing an A_(2) affinity for biotite granite and an A_(1) affinity for amazonite granite and granitic pegmatite.Zircon ε_(Hf)(t)values of the granitoids are 0.45–2.66,with Hf model ages of 0.99–1.17 Ga.This suggests that these A-type granites originated from partial melting of the lower crust.We propose that Xingxingxia Triassic A-type granites formed under lithospheric extension from post-orogenic to anorogenic intraplate settings and NE-trending regional strike-slip fault-controlled magma emplacement in the upper crust.

U-Pb zircon ages and petrogeochemistry and tectonic implications of gabbro and granite in southwest Lahad Datu area of Sabah, Malaysia

The southwest Lahad Datu felsic rocks were previously thought to have formed in the late Triassic as part of the microcontinental crystalline basement.Based on U-Pb ages,geochemistry,and the Hfisotopes of zircon from the southeastern Sabah gabbro and granite,in this study,the tectonic properties of the Sabah area during the Triassic were investigated.The weighted average U-Pb zircon ages of the gabbro and granite samples were determined to be(230.9±2.5)Ma and(207.1±3.3)Ma,respectively.The granite had SiO_(2) contents of 66.54%-79.47%,low TiO_(2) contents of 0.08%-0.3%,Al_(2)O_(3) contents of 10.97%-16.22%,Na_(2)O contents of 5.91 %-6.39%,and low K_(2)O contents of 0.15%-0.65%.The chondrite-normalized rare earth element(REE) patterns exhibit light REE enrichment,with right-sloping curves.The primitive mantle-normalized trace element spider diagrams exhibit Th,U,La,Sr,and Zr enrichment and Nb,Ta,P and Ti depletions,i.e.,the geochemical characteristics of typical island arc igneous rocks.The tectonic discriminant diagram indicates that the granite is a volcanic arc granite.The Hf isotopic an alysis of gabbro zircon revealed that the zircons have ε_(Hf)(t)values of 12.08-16.24(mean of 14.32) and two-stage model ages(t_(DM2)) of 223-491 Ma(mean of 347 Ma).This indicates that the diagenetic magma of the gabbro was mainly derived from melting of newly formed crustal materials.The ophiolite in southeast Sabah has existed since the early Late Triassic.The crystalline basement granite in southeastern S abah was emplaced lasted from late Triassic to early Cretaceous.Based on previous studies and global plate reconstruction models,it is speculated that the southeastern Sabah granite may have been formed in an island arc setting,i.e.,where the oceanic crust of the Paleo-Tethys Ocean collided with the oceanic crust of the Panthalassa Ocean.

Geochemistry, zircon U–Pb geochronology, and Hf isotopes of S-type granite in the Baoshan block, constraints on the age and evolution of the Proto-Tethys

Geochemistry, zircon U–Pb geochronology, and Hf isotope data for the Early Paleozoic granites in the Baoshan Block reveal the Early Paleozoic tectonic evolution of the Proto-Tethys. The samples are high-K, calcalkaline, strongly peraluminous rocks with A/CNK values of 1.37–1.46, are enriched in SiO2, K2O, and Rb, and are depleted in Nb, P, Ti, Eu, and heavy rare earth elements,which indicates the crystallization fractionation of the granitic magma. Zircon U–Pb dating indicates that they formed in ca. 480 Ma. The Nansa granites have εHf(t) values ranging from-16.04 to 4.36 with corresponding TC DMages of 2.10–0.81 Ga, which suggests the magmas derived from the partial melting of ancient metasedimentary with minor involvement of mantle-derived components. A synthesis of data for the Early Paleozoic igneous rocks in the Baoshan block and adjacent(Tengchong,Qiangtang, Sibumasu, Himalaya, etc.) blocks indicates that these blocks were all aligned along the proto-Tethyan margin of East Gondwana in the Early Paleozoic. The Early Paleozoic S-type granites from Nansa were generated in a high-temperature and low-pressure(HTLP) extensional tectonic setting, which resulted from Andean-type orogeny instead of the final assembly of Gondwana or crustal extension in a non-arc environment. In certain places, an expanding environment may exist in opposition to the tectonic backdrop of the lithosphere’s thickening and shortening, leading the crust to melt and decompress,mantle-derived materials to mix, and a small quantity of peraluminous granite to emerge.

Petrogenesis and Tectonic Significance of Shenxianshui Alkaline Granite in Gejiu,Yunnan Province,China

The Shenxianshui granites in the western Gejiu area were formed in the Late Cretaceous.Laser ablation inductively coupled plasma mass spectrometry indicates zircon U-Pb ages ranging from 90.67±0.7 to 85.97±0.6 Ma.The intrusive rocks are peraluminous(A/CNK=1.03 to 1.33)and calc-alkaline,showing an affinity towards I-type granite.Large ion lithophilic elements are enriched in K and Rb,while high field strength elements are depleted.Moreover,light rare earth elements are significantly enriched,showing a slight negative Eu anomaly(Eu/Eu^(*)=0.39 to 0.58).Shenxianshui granite has a relatively high initial Sr isotope ratio(^(87)Sr/^(86)Sr)_(i)(0.7098-0.7105),negative ε_(Nd)(t)values(−7.99 to−7.44)and negative ε_(Hf)(t)values(−8.37 to−2.58).Combined with previous studies,these characteristics suggest that the Shenxianshui alkaline granites were formed in a post-collision extensional environment.The alkaline granitic magma possibly originated from the partial melting of the lower crust during the Mesoproterozoic era and may have contained mantle source materials.Shenxianshui alkaline granite was formed from mixed magma with a high degree of crystal differentiation.The abundance of ore-forming elements indicates that Shenxianshui granite has the potential to mineralize key metals and rare earth elements.

Mechanical properties and energy evolution of Beishan shallow-layer granite under different unloading paths

Rock has mechanical characteristics and a fracture damage mechanism that are closely related to its loading history and loading path. The mechanical properties, fracture damage features, acoustic emission(AE) characteristics, and strain energy evolution of the Beishan shallow-layer granite used in triaxial unloading tests were investigated in this study. Three groups of triaxial tests, namely, conventional triaxial compression test(Group Ⅰ), maintaining deviatoric stress synchronously unloading confining pressure test(Group Ⅱ), and loading axial pressure synchronously unloading confining pressure test(Group Ⅲ), were carried out for the cylindrical granite specimens. AE monitoring device was utilized in these tests to determine the degree to which the AE waves and AE events reflected the degree of rock damage. In addition, the crack stress thresholds of the specimens were determined by volumetric strain method and AE parameter method, and strain energy evolution of the rock was explored in different damage stages. The results show that the shallow-layer granite experiences brittle failure during the triaxial loading test and unloading test, and the rock has a greater damage degree during the unloading test. The crack stress thresholds of these samples vary greatly between tests, but the threshold ratios of all samples are similar in the same crack damage stage. The Mogi-Coulomb strength criterion can better describe the unloading failure strength of the rock. The evolution of the AE parameter characteristics and strain energy differs between the specimens used in different stress path tests. The dissipative strain energy is the largest in Group Ⅱ and the smallest in Group Ⅰ.

A coupled thermo-mechanical peridynamic model for fracture behavior of granite subjected to heating and water-cooling processes

Thermal damage and thermal fracture of rocks are two important indicators in geothermal mining projects.This paper investigates the effects of heating and water-cooling on granite specimens at various temperatures.The laboratory uniaxial compression experiments were also conducted.Then,a coupled thermo-mechanical ordinary state-based peridynamic(OSB-PD)model and corresponding numerical scheme were developed to simulate the damage of rocks after the heating and cooling processes,and the change of crack evolution process was predicted.The results demonstrate that elevated heating temperatures exacerbate the thermal damage to the specimens,resulting in a decrease in peak strength and an increase in ductility of granite.The escalating occurrence of thermal-induced cracks significantly affects the crack evolution process during the loading phase.The numerical results accurately reproduce the damage and fracture characteristics of the granite under different final heating temperatures(FHTs),which are consistent with the test results in terms of strength,crack evolution process,and failure mode.

Mechanical properties and fracture surface roughness of thermally damaged granite under dynamic splitting

In order to understand the mechanical properties and the fracture surface roughness characteristics of thermally damaged granite under dynamic splitting,dynamic Brazilian splitting tests were conducted on granite samples after thermal treatment at 25,200,400,and 600℃.Results show that the dynamic peak splitting strength of thermally damaged granite samples increases with increasing strain rate,showing obvious strain‐rate sensitivity.With increasing temperature,thermally induced cracks in granite transform from intergranular cracks to intragranular cracks,and to a transgranular crack network.Thermally induced damages reduce the dynamic peak splitting strength and the maximum absorbed energy while increasing the peak radial strain.The fracture mode of the thermally damaged granite under dynamic loads is mode Ⅱ splitting failure.By using the axial roughness index Z2 a,the distribution ranges of the wedge‐shaped failure zones and the tensile failure zones in the fracture surfaces under dynamic Brazilian splitting can be effectively identified.The radial roughness index Z_(2)^(r)is sensitive to the strain rate and temperature.It shows a linear correlation with the peak splitting strength and the maximum absorbed energy and a linear negative correlation with the peak radial strain.Z_(2)^(r)can be used to quantitatively estimate the dynamic parameters based on the models proposed.

Petrogenesis and Tectonic Implications of the Early Triassic Nianzi Adakitic Granite Unit in the Yanshan Fold and Thrust Belt:New Constraints from U-Pb Geochronology and Sr-Nd-Hf Isotopes

The Nianzi granite unit,which includes the Nianzi,Xiaolianghou and Xiawopu granitic intrusions,is a significant component of the northern part of the North China Craton(NCC)and is situated in the Yanshan fold and thrust belt(YFTB).However,there is still debate regarding the tectonic evolutionary history of the YFTB during the late Permian to Triassic period,specifically regarding the timing of subduction and collision between the NCC and the Paleo-Asian Ocean.The Nianzi granite unit exhibits unique petrological,geochronological and geochemical signatures that shed light on the tectonic evolutionary history of the YFTB.This study presents detailed petrology,whole-rock geochemistry,together with Sr-Nd isotopic,zircon U-Pb dating and Lu-Hf isotopic data of the granites within the Nianzi granite unit.Our findings demonstrate that the granites primarily consist of subhedral K-feldspar,plagioclase,quartz,minor biotite and hornblende,with accessory titanite,apatite,magnetite and zircon.Zircon U-Pb dating indicates that the Xiaolianghou granite was emplaced at 247.5±0.62 Ma.Additionally,the adakitic characteristics of the Nianzi,Xiawopu and Xiaolianghou granitic intrusions,such as high Sr and Ba contents and high ratios of Sr/Y and(La/Yb)N,combined with negative Sr-Nd and Lu-Hf isotopes(87Sr/86Sr)i=0.705681–0.7057433,εNd(t)=−21.98 to−20.97,zirconεHf(t)=−20.26 to−9.92,as well as the I-type granite features of high SiO_(2),Na_(2)O and K_(2)O/Na_(2)O ratios,enriched Rb,K,Sr and Ba,along with depleted Th,U,Nb,Ta,P and Ti,suggest that the Nianzi granitic unit was mainly derived from the partial melting of a thickened lower crust containing hydrous,calc-alkaline to high-K calc-alkaline,mafic to intermediate metamorphic rocks.In light of these parameters,we further integrate our data with previous studies and conclude that the Nianzi granitic unit was generated in a post-collisional extensional environment during the Early Triassic.

Spatial-temporal distribution and geochemistry of highly evolved Mesozoic granites in Great Xing’an Range,NE China:Discriminant criteria and geological significance

Highly evolved granite is an important sign of the mature continent crust and closely associated with deposits of rare metals.In this work,the authors undertake systematically zircon U-Pb ages and whole rock elemental data for highly evolved granitic intrusions from the Great Xing’an Range(GXR),NE China,to elucidate their discriminant criteria,spatial-temporal distribution,differentiation and geodynamic mecha-nism.Geochemical data of these highly evolved granites suggest that high w(SiO_(2))(>70%)and differentiation index(DI>88)could be quantified indicators,while strong Eu depletion,high TE_(1,3),lowΣREE and low Zr/Hf,Nb/Ta,K/Rb could only be qualitative indicators.Zircon U-Pb ages suggest that the highly evolved gran-ites in the GXR were mainly formed in Late Mesozoic,which can be divided into two major stages:Late Ju-rassic-early Early Cretaceous(162-136 Ma,peak at 138 Ma),and late Early Cretaceous(136-106 Ma,peak at 126 Ma).The highly evolved granites are mainly distributed in the central-southern GXR,and display a weakly trend of getting younger from northwest to southeast,meanwhile indicating the metallogenic potential of rare metals within the central GXR.The spatial-temporal distribution,combined with regional geological data,indicates the highly evolved Mesozoic granites in the GXR were emplaced in an extensional environ-ment,of which the Late Jurassic-early Early Cretaceous extension was related to the closure of the Mongol-Okhotsk Ocean and roll-back of the Paleo-Pacific Plate,while the late Early Cretaceous extension was mainly related to the roll-back of the Paleo-Pacific Plate.

Geochemical studies of hybrid granite from Madugulapalli area, Eastern Dharwar Craton, Southern India: Implications for crustal mixing

Magma produced by melting of continental crust and mantle at the Archean-Proterozoic boundary are compositionally variable and chemical compositions provide evidence for the mixing of two sources. Understanding the composition of hybrid magma is essential for determining the comparative infl uence of crust and mantle sources during orogenesis. The hybrid granites are less documented in Indian cratons, especially less in Dharwar Craton. Here we present petrographic and whole-rock geochemical data of Madgulapalli granitic rocks situated in the NE part of the Eastern Dharwar Craton(EDC), to elucidate their petrogenesis and role in crust formation. The Madugulapalli granites(MPG) are composed chiefl y of plagioclase, quartz, and alkali feldspar with associated biotite showing alteration and inter-granular textures. Geochemically, they are metaluminous to peraluminous in nature with calc-alkaline hybrid granite. The hybrid granites exhibit both negative and positive europium anomalies;the lower Rb/Sr, Rb, Sr, and higher Sr/Y,(Dy/Yb)N ratios suggest that the interaction of older rocks with residual garnet source melted at high pressures. We hypothesize that hybrid granites are formed by interaction(e.g., metasomatism, mingling, or mixing) between parental magmas and pre-existing rocks with the infl uence of sanukitoid melts(heat source) in a subduction environment. The genesis of the hybrid granites demonstrates the mixing coupled with diff erentiation in the petrogeny’s residue system in a syn-collision setting followed by continental crust stability in EDC during the Neoarchean period.

Geochronology,Petrogenesis and Tectonic Setting of the Late Jurassic I-type Granites in the North Qinling Orogenic Belt,Central China

The North Qinling Orogenic Belt(NQOB)is a composite orogenic belt in central China.It started evolving during the Meso-Neoproterozoic period and underwent multiple stages of plate subduction and collision before entering intra-continental orogeny in the Late Triassic.The Meso-Cenozoic intra-continental orogeny and tectonic evolution had different responses in various terranes of the belt,with the tectonic evolution of the middle part of the belt being particularly controversial.The granites distributed in the Dayu and Kuyu areas in the middle part of the NQOB can provide an important window for revealing the geodynamic mechanisms of the NQOB.The main lithology of Dayu and Kuyu granites is biotite monzogranite,and the zircon U-Pb dating yielded intrusive ages of 151.3±3.4 Ma and 147.7±1.5 Ma,respectively.The dates suggest that the biotite monzogranite were formed at the end of the Late Jurassic.The whole-rock geochemistry analysis shows that the granites in the study areas are characterized by slightly high SiO_(2)(64.50-68.88 wt%)and high Al_(2)O_(3)(15.12-16.24 wt%)and Na_(2)O(3.55-3.80 wt%)contents.They are also enriched in light rare earth elements,large ion lithophile elements(e.g.,Ba,K,La,Pb and Sr),and depleted in high field strength elements(HFSEs)(e.g.,Ta,Nb,P and Ti).Additionally,the granites have weakly negative-slightly positive Eu anomalies(δEu=0.91-1.19).Zircon Lu-Hf isotopic analysis showedε_(Hf)(t)=-6.1--3.8,and the two-stage model age is T_(2DM(crust))=1.5-1.6 Ga.The granites in the study areas are analyzed as weak peraluminous high-K calc-alkaline I-type granites.They formed by partial melting of the thickened ancient lower crust,accompanied by the addition of minor mantle-derived materials.During magma ascent,they experienced fractional crystallization,with residual garnet and amphibole for a certain proportion in the magma source region.Comprehensive the geotectonic data suggest that the end of the Late Jurassic granite magmatism in the Dayu and Kuyu areas represents a compression-extension transition regime.It may have been a response to multiple tectonic mechanisms,such as the late Mesozoic intra-continental southward subduction of the North China Craton and the remote effect of the Paleo-Pacific Plate subduction.

Correlations between mineral composition and mechanical properties of granite using digital image processing and discrete element method

This study investigated the correlations between mechanical properties and mineralogy of granite using the digital image processing(DIP) and discrete element method(DEM). The results showed that the X-ray diffraction(XRD)-based DIP method effectively analyzed the mineral composition contents and spatial distributions of granite. During the particle flow code(PFC2D) model calibration phase, the numerical simulation exhibited that the uniaxial compressive strength(UCS) value, elastic modulus(E), and failure pattern of the granite specimen in the UCS test were comparable to the experiment. By establishing 351 sets of numerical models and exploring the impacts of mineral composition on the mechanical properties of granite, it indicated that there was no negative correlation between quartz and feldspar for UCS, tensile strength(σ_(t)), and E. In contrast, mica had a significant negative correlation for UCS, σ_(t), and E. The presence of quartz increased the brittleness of granite, whereas the presence of mica and feldspar increased its ductility in UCS and direct tensile strength(DTS) tests. Varying contents of major mineral compositions in granite showed minor influence on the number of cracks in both UCS and DTS tests.

Gold mineralization in Jiaodong Peninsula and destruction of North China Craton:Insights from Mesozoic granite

Large-scale tectonic magmatism and extensive gold mineralization have occurred in the eastern North China Craton(NCC)(Jiaodong and Liaodong peninsulas)since Mesozoic,which indicated that the region experienced decratonization process.The genesis type of granites evolved from S-type to I-type and A-type during Late Jurassic to Early Cretaceous,and thus reflects the evolution of geodynamics in the Late Mesozoic,indicating the varied subduction process of the Paleo-Pacific Plate(PPP)and the craton destruction.The evolution of geochemical features shows that the mantle beneath the Jiaodong Peninsula evolved from EM-II in Jurassic to EM-I in Early Cretaceous,demonstrating that the mantle switched from enriched to depleted.The gold of decratonic gold deposits in Jiaodong Peninsula mainly comes from the lithospheric mantle domains metasomatized by fluids derived from the metamorphism and dehydration of the subducted slab in the mantle transition zone.The rapid decomposition of minerals leads to the concentrated release of ore-forming fluids,and this process leads to the explosive gold mineralization during the craton destruction.Extensive magmatic uplift and extensional structures,triggered by the craton destruction in Early Cretaceous formed the extensional tectonic system,providing space for the decratonic gold deposits in Jiaodong Peninsula.

Quantitative characterization of vertical zonation of Mesozoic granite weathering reservoirs in the coastal area of eastern Fujian Province,China

Weathering crust reservoirs have obvious vertical zonation,which is the focus of weathering crust reservoir research,but there is a lack of quantitative characterization indexes.To achieve the quantitative characterization of granite weathering crust reservoir and provide the basis for oil exploration of granite weathering crust buried hill reservoir,in this paper,the vertical zonation of granite weathering crust reservoir is quantitatively divided by testing and analyzing the uniaxial compressive strength(UCS),magnetic susceptibility(MS),permeability,and chemical index of alteration(CIA)of the Mesozoic granite weathering crust in the coastal area of eastern Fujian.The results show that the granite weathering crust reservoir can be divided into four zones vertically:a soil zone(SZ),weathered and dissolved zone(WDZ),fracture zone(FZ),and bedrock zone(BZ).A cataclastic area is developed in the FZ and BZ,in which structural fractures are well-developed,the fracture surface density is usually greater than 200 m/m^(2),and the contribution to the fractures in the rock mass is up to about 50%,making this the sweet spot of the reservoir.In the SZ,the rocks are loose,and the pores are well-developed.The UCS is less than 10 MPa,and the average rate of change of the UCS(Δ_(σ))is 0.90.The average permeability is 2823.00 mD,and the average rate of change of the permeability(Δ_(κ))is 5.13.The average CIA is 74.9%.The average clay mineral content is 7%.The rocks in the WDZ have been significantly weathered by physical and chemical processes,and the weathering fractures and dissolution pores are well-developed.The average UCS is 18.2 MPa,and the averageΔ_(σ)is 0.70.The average permeability is 143.80 mD,and averageΔ_(κ)is 4.17.The average CIA is 65.3%.The average clay mineral content is 4%.Under the influence of tectonic movement and physical weathering,the rocks in the FZ have developed structural fractures and a few weathered fractures.The average UCS is 57.9 MPa,and the averageΔ_(σ)is 0.18.The average permeability is 5.50 mD,and the averageΔ_(κ)is 2.55.The average CIA is 61.6%.The average clay mineral content is 2%.In the BZ,the rocks are intact and hard.The average UCS is 69.9 MPa,and the average Ds is 0.13.The average permeability is 1.46 mD,and the averageΔ_(κ)is 1.43.The average CIA is 57.8%.The average clay mineral content is less than 1%.The multi-parameter combination of the UCS,Δ_(σ),permeability,Δ_(κ),CIA,and clay mineral content achieved good results in the division of the zones of the weathering crust.The UCS increases gradually from top to bottom,while Ds,permeability,Δ_(κ),CIA,and clay mineral content all decrease gradually.In addition,based on the petrophysical parameters of the rocks,including the density,resistivity,and acoustic velocity,a good division effect was also achieved,which can provide a basis for the vertical zonation of the granite buried-hill weathering crust reservoir.

Magma source and tectonic setting of the Dunde granite in the Western Tianshan:constraints from geochronology,geochemistry,and Sr–Nd–Hf isotopes

The Dunde iron-zinc polymetallic deposit is one of large iron deposits occurred in the Awulale Metallogenetic Belt,Western Tianshan(NW-China).This study reports new geochronology and geochemistry for granite in the Dunde mining area in order to constrain the tectonicmagmatic activities and metallogenesis of this region.Granites in the southwest of Dunde mining area are mainly syenogranites intruded into volcanics of the Dahalajunshan Formation in the Early Carboniferous,and they are far from the area where ore bodies and mineralized altered rocks are widely developed.LA-ICP-MS U–Pb zircon dating indicates that Dunde syenogranite was at 306.8±1.0 Ma,which could constrain the upper limit of metallogenic age for this deposit.The Dunde granites are high SiO_(2)(73.41–80.07 wt%),high differentiation index(D.I.=89.7–95.0),weakly peraluminous to metaluminous(A/CNK=0.94–1.08),and they are enriched in LILE and LREE and depleted in Eu,Ba,Sr and P_(2)O_(5),indicating that they belong to highly fractionated Ⅰ-type granite.Based on εHf values(+9.2 to+10.5)for zircon and high εNd(-t)values(+4.7 to+5.8)for whole-rock,and the two-stage model ages for 601–735 Ma,suggest that the magma source could be the juvenile lower crust.Combined with regional geological setting,the 306.8 Ma Dunde granites are formed in post-collision extensional tectonic setting.

Mesoscopic measurement of damage and shear bands of granite residual soil using Micro-CT and digital volume correlation

The mesomechanics of geotechnical materials are closely related to the macromechanical properties,especially the mesoscale evolution of shear bands,which is helpful for understanding the failure mechanism of geotechnical materials.However,there is lack of effective quantitative analysis method for the complex evolution mechanism of threedimensional shear bands.In this work,we used X-ray computed tomography(CT)to reconstruct volume images and used the digital volume correlation(DVC)method to calculate the three-dimensional strain fields of granite residual soil samples at different loading stages.The trend of the failure surface of the shear bands was obtained by the planar fitting method,and the connectivity index was constructed according to the projection characteristics of the shear bands on the failure trend surface.The results support the following findings:the connectivity index of the shear band increases rapidly and then slowly with increasing axial strain,which is characterized by a near'S'curve.As the stress reaches the peak value,the connectivity index of the shear bands almost exceeds 0.7.The contribution of the new shear band volume to the connectivity of the shear bands becomes increasingly small with increasing axial loading.Affected by quartz grains and stress at the initial stage,the dip angle gradually and finally approaches the included angle of the maximum shear stress from the discrete state with increasing axial loading.The tendency and dip angle of the resulting shear bands are dynamic,and the tendency slightly deflects with increasing loading.

Peraluminous A-type granites formed through synchronous fractionation,magma mixing,mingling,and undercooling:evidence from microgranular enclaves and host Mesoproterozoic Kanigiri granite pluton,Nellore Schist Belt,southeast India

The field and microstructural features coupled with mineral chemical data from microgranular enclave(ME)and host Mesoproterozoic Kanigiri granite(KG)pluton of Nellore Schist Belt(NSB),Southeastern India,have been documented in order to infer the likely processes responsible for the origin and evolution of ME and host KG magma.The ME and host KG bear the same mineral assemblages barring the KG which does not contain amphibole;however,they are modally disequilibrated.The ME in KG is originated due to multiple intrusions of ME magmas into the crystallizing host KG magma chamber.Field and textural features indicate the dynamic magma flow,mingling,and undercooling of the ME against a relatively cooler surface of host KG magma.The presence of NSB country rock xenoliths and its diffuse boundaries suggest the intrusive relation and marginal assimilation by the intruding KG magma.The occasional cumulate texture in the ME appears to have formed by the accumulation of early-formed minerals that crystallized rapidly in the ME magma globules.The ME shows the magmatically deform features developed due to the flowage and erosion by the subsequent intrusions of ME magma pulses into the crystallizing host KG magma chamber.The ME amphiboles show unusual composition as ferro-edenitic hornblende to potassian-hastingsitic hornblende,that crystallized in the subalkaline-alkaline transition,low fO_(2)(reducing to mildly oxidizing)magma.The unusual extremely low Mg/Mg+Fe^(t)=0.015(avg.)of ME amphiboles may be related to the changing physico-chemical(P,T,fO_(2),and H_(2)O)condition of the ME magma or they might have crystallized in equilibrium with more evolved KG magma.The KG(FeOt/MgO=37.04,avg.)and ME(FeO~t/MgO=77.72,avg.)biotites are siderophyllite,and buffered between QFM and NNO syn-crystallizing in the water undersaturated(H_(2O)≈3.58 wt.%in KG;≈3.53wt.%in ME),alkaline anorogenic(A-type)host magmas that were emplaced at mid-crustal(4–5 kbar;17 km)depth.Field,microtextural and mineral chemical evidences suggest that the alkaline KG magma originated from crustal source and evolved through synchronous fractionation,mixing,and mingling with coeval ME magmas in the KG magma chamber.

An engineering classification system for the detached granite blocks distributed on slopes

Gentle slopes with large amounts of granite blocks are widespread in granitic areas with warm and humid climate.These blocks pose a potential risk to the existing and planned infrastructure.The instability type and geometry of these blocks will influence their motility and destructive power to some extent.This study aims at creating a classification system that can indicate both the shape and the instability type of these blocks and then developing a block removal scheme.The classification system was constructed based on the mechanical stability analysis of blocks on an inclined surface.This analysis identified key factors affecting stability,including block shape,block weathering roundness,the existing state of a block on a slope,and the friction between the block and the slope.The achieved work allowed the establishment of a direct correlation between block geometry and their instability types.The availability of this classification system was validated by field data and experimental data in the literature.The proposal to remove blocks identified as the toppling types,such as cylindrical-toppling types,cuboid-toppling types,cube-toppling types,was put forward to avoid the uneconomical problem of a complete clearance.Meanwhile,this classification provides a foundation for further research on the instability probability of each type of block and the development of a more refined blocks’removal scheme.The classification approach adopted in this paper can provide a reference for the classification of other lithological blocks under similar engineering geological conditions.