A robust performance evaluation method for vapor cells used in magnetometers is proposed in this work.The performance of the vapor cell determines the sensitivity of the magnetic measurement,which is the core paramete...A robust performance evaluation method for vapor cells used in magnetometers is proposed in this work.The performance of the vapor cell determines the sensitivity of the magnetic measurement,which is the core parameter of a magnetometer.After establishing the relationship between intrinsic sensitivity and the total relaxation rate,the total relaxation rate of the vapor cell can be obtained to represent the intrinsic sensitivity of the magnetometer by fitting the parameters of the magnetic resonance experiments.The method for measurement of the total relaxation rate based on the magnetic resonance experiment proposed in this work is robust and insensitive to ambient noise.Experiments show that,compared with conventional sensitivity measurement,the total relaxation rate affected by magnetic noise below 0.9 n T,pump light frequency noise below 1.5 GHz,pump light power noise below 9%,probe light power noise below 3%and temperature fluctuation of 150±3℃deviates by less than 2%from the noise-free situation.This robust performance evaluation method for vapor cells is conducive to the construction of a multi-channel high-spatial-resolution cardio-encephalography system.展开更多
The nanoscale morphology within the photoactive layer of organic solar cells is critical in determining the power conversion efficiency (PCE). Here, we draw attention to the roles of molecular arrangement, and domain ...The nanoscale morphology within the photoactive layer of organic solar cells is critical in determining the power conversion efficiency (PCE). Here, we draw attention to the roles of molecular arrangement, and domain size in improving performance, which can be tuned by subjecting the photovoltaic materials to solvent vapor annealing (SVA). In our PTB7-Th:ITIC devices, the PCE can be improved by exposing the device to solvent vapor for 60 s after solution casting. The solvent vapor prolongs reorganizational time and increases molecular ordering and domain size/phase separation, which are sub-optimal in pristine PTB7-Th:ITIC blend films. This improved morphology results in better charge mobility, reduced recombination, and ultimately an improved PCE from 7.1% to 7.9% when using CS2 as the annealing solvent. This simple SVA technique can be applied to a range of OPV systems where the molecular ordering is inferior within the as-cast photoactive layer.展开更多
Organometal halide perovskite based solar cells have emerged as one of the most promising candidates for low-cost and high-efficiency solar cell technologies. Here a Vapor Transfer Method （VTM） is used to fabricate ...Organometal halide perovskite based solar cells have emerged as one of the most promising candidates for low-cost and high-efficiency solar cell technologies. Here a Vapor Transfer Method （VTM） is used to fabricate high quality perovskite thin films in a balanced vacuum capsule. By adjusting the reaction tem- perature, CH_3NHl_3 saturated vapor which then reacts with Pbl_2 films can be controlled and the formation process of CH_3NH_3Pbl_3 perovskite films can be further influenced. Prepared perovskite films which ex- hibit pure phase, smooth surface and high crystallinity are assembled into planar heterojunction inverted solar cells. The whole fabrication process of solar cell devices is organic solution free. Finally, the cham- pion cell achieved power conversion efficiency （PCE） of 13.08% with negligible current-voltage hysteresis under fully open-air conditions. The photovoltaic performance could be further enhanced by optimizing perovskite composition and the device structure.展开更多
We present a pair of phase-locked lasers with a 9.2-GHz frequency difference through the injection locking of a master laser to the RF-modulation sideband of a slave diode laser. Using this laser system, a coherent po...We present a pair of phase-locked lasers with a 9.2-GHz frequency difference through the injection locking of a master laser to the RF-modulation sideband of a slave diode laser. Using this laser system, a coherent population trapping （CPT） signal with a typical linewidth of ～ 182 Hz is obtained in a cesium vapor cell filled with 30 Torr （4kPa） of neon as the buffer gas. We investigate the influence of the partial pressure of the neon buffer gas on the CPT linewidth, amplitude, and frequency shift. The results may offer some references for CPT atomic clocks and CPT atomic magnetometers.展开更多
Chip-sized alkali atom vapor cells with high hermeticity are successfully fabricated through deep silicon etching and two anodic bonding processes.A self-built absorption spectrum testing system is used to test the ab...Chip-sized alkali atom vapor cells with high hermeticity are successfully fabricated through deep silicon etching and two anodic bonding processes.A self-built absorption spectrum testing system is used to test the absorption spectra of the ru-bidium atoms in alkali atom vapor cells.The influence of silicon cavity size,filling amount of rubidium atoms and temperature on the absorption spectra of rubidium atom vapor in the atom vapor cells are studied in depth through a theoretical analysis.This study provides a reference for the design and preparation of high quality chip-sized atom vapor cells.展开更多
Physical vapor deposition(PVD)can be used to produce high-quality Gd_(2)O_(3)-doped CeO2(GDC)films.Among various PVD methods,reactive sputtering provides unique benefits,such as high deposition rates and easy upscalin...Physical vapor deposition(PVD)can be used to produce high-quality Gd_(2)O_(3)-doped CeO2(GDC)films.Among various PVD methods,reactive sputtering provides unique benefits,such as high deposition rates and easy upscaling for industrial applications.GDC thin films were successfully fabricated through reactive sputtering using a Gd_(0.2)Ce_(0.8)(at%)metallic target,and their application in solid oxide fuel cells,such as buffer layers between yttria-stabilized zirconia(YSZ)/La0.6Sr0.4Co0.2Fe0.8O_(3−δ)and as sublayers in the steel/coating system,was evaluated.First,the direct current(DC)reactive-sputtering behavior of the GdCe metallic target was determined.Then,the GDC films were deposited on NiO-YSZ/YSZ half-cells to investigate the influence of oxygen flow rate on the quality of annealed GDC films.The results demonstrated that reactive sputtering can be used to prepare thin and dense GDC buffer layers without high-temperature sintering.Furthermore,the cells with a sputtered GDC buffer layer showed better electrochemical performance than those with a screen-printed GDC buffer layer.In addition,the insertion of a GDC sublayer between the SUS441 interconnects and the Mn-Co spinel coatings contributed to the reduction of the oxidation rate for SUS441 at operating temperatures,according to the area-specific resistance tests.展开更多
An atomic magnetometer based on coherent population trapping(CPT) resonances in microfabricated vapor cells is demonstrated. Fabricated by the micro-electro-mechanical-system(MEMS) technology, the cells are filled wit...An atomic magnetometer based on coherent population trapping(CPT) resonances in microfabricated vapor cells is demonstrated. Fabricated by the micro-electro-mechanical-system(MEMS) technology, the cells are filled with Rb and Ne at a controlled pressure. An experimental apparatus is built for characterizing properties of microfabricated vapor cells via the CPT effects. The typical CPT linewidth is measured to be about 3 k Hz(1.46 k Hz with approximately zero laser intensity) for the rubidium D1 line at about 90℃. The effects of pressure, temperature and laser intensity on CPT linewidth are studied experimentally. A closed-loop atomic magnetometer is finally finished with a sensitivity of 210.5 p T/Hz1/2 at 1 Hz bandwidth. This work paves the way for developing an integrated chip-scale atomic magnetometer in the future.展开更多
We directly grow a lattice matched GalnP/GalnAs/GalnNAs/Ge （1.88 eVil .42 eVil .05 eV/0.67eV） four-junction （4J） solar cell on a Ge substrate by the metal organic chemical vapor deposition technology. To solve the...We directly grow a lattice matched GalnP/GalnAs/GalnNAs/Ge （1.88 eVil .42 eVil .05 eV/0.67eV） four-junction （4J） solar cell on a Ge substrate by the metal organic chemical vapor deposition technology. To solve the current limit of the GalnNAs sub cell, we design three kinds of anti-reflection coatings and adjust the base region thickness of the GalnNAs sub cell. Developed by a series of experiments, the external quantum efficiency of the GalnNAs sub cell exceeds 80%, and its current density reaches 11.24 mA/cm2. Therefore the current limit of the 4J solar cell is significantly improved. Moreover, we discuss the difference of test results between 4J and GalnP/GalnAs/Ge solar cells under the 1 sun AMO spectrum.展开更多
Existing microfabricated atomic vapor cells have only one optical channel,which is insufficient for supporting the multiple orthogonal beams required by atomic devices.In this study,we present a novel wafer-level manu...Existing microfabricated atomic vapor cells have only one optical channel,which is insufficient for supporting the multiple orthogonal beams required by atomic devices.In this study,we present a novel wafer-level manufacturing process for fabricating multi-optical-channel atomic vapor cells and an innovative method for batch processing the inner sidewalls of millimeter glass holes to meet optical channel requirements.Surface characterization and transmittance tests demonstrate that the processed inner sidewalls satisfy the criteria for an optical channel.In addition,the construction of an integrated processing platform enables multilayer non-isothermal anode bonding,the filling of inert gases,and the recovery and recycling of noble gases.Measurements of the absorption spectra and free-induction decay signals of xenon-129(^(129)Xe)and xenon-131(^(131)Xe)under different pump-probe schemes demonstrate the suitability of our vapor cell for use in atomic devices including atomic gyroscopes,dual-beam atomic magnetometers,and other optical/atomic devices.The proposed micromolding technology has broad application prospects in the field of optical-device processing.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.62173020 and 62103381)。
文摘A robust performance evaluation method for vapor cells used in magnetometers is proposed in this work.The performance of the vapor cell determines the sensitivity of the magnetic measurement,which is the core parameter of a magnetometer.After establishing the relationship between intrinsic sensitivity and the total relaxation rate,the total relaxation rate of the vapor cell can be obtained to represent the intrinsic sensitivity of the magnetometer by fitting the parameters of the magnetic resonance experiments.The method for measurement of the total relaxation rate based on the magnetic resonance experiment proposed in this work is robust and insensitive to ambient noise.Experiments show that,compared with conventional sensitivity measurement,the total relaxation rate affected by magnetic noise below 0.9 n T,pump light frequency noise below 1.5 GHz,pump light power noise below 9%,probe light power noise below 3%and temperature fluctuation of 150±3℃deviates by less than 2%from the noise-free situation.This robust performance evaluation method for vapor cells is conducive to the construction of a multi-channel high-spatial-resolution cardio-encephalography system.
基金supported by the Natural Science Foundation of Hubei Province (Grant no. 2018CFA055)the National Natural Science Foundation of China (Grants no. 21774097)
文摘The nanoscale morphology within the photoactive layer of organic solar cells is critical in determining the power conversion efficiency (PCE). Here, we draw attention to the roles of molecular arrangement, and domain size in improving performance, which can be tuned by subjecting the photovoltaic materials to solvent vapor annealing (SVA). In our PTB7-Th:ITIC devices, the PCE can be improved by exposing the device to solvent vapor for 60 s after solution casting. The solvent vapor prolongs reorganizational time and increases molecular ordering and domain size/phase separation, which are sub-optimal in pristine PTB7-Th:ITIC blend films. This improved morphology results in better charge mobility, reduced recombination, and ultimately an improved PCE from 7.1% to 7.9% when using CS2 as the annealing solvent. This simple SVA technique can be applied to a range of OPV systems where the molecular ordering is inferior within the as-cast photoactive layer.
文摘Organometal halide perovskite based solar cells have emerged as one of the most promising candidates for low-cost and high-efficiency solar cell technologies. Here a Vapor Transfer Method （VTM） is used to fabricate high quality perovskite thin films in a balanced vacuum capsule. By adjusting the reaction tem- perature, CH_3NHl_3 saturated vapor which then reacts with Pbl_2 films can be controlled and the formation process of CH_3NH_3Pbl_3 perovskite films can be further influenced. Prepared perovskite films which ex- hibit pure phase, smooth surface and high crystallinity are assembled into planar heterojunction inverted solar cells. The whole fabrication process of solar cell devices is organic solution free. Finally, the cham- pion cell achieved power conversion efficiency （PCE） of 13.08% with negligible current-voltage hysteresis under fully open-air conditions. The photovoltaic performance could be further enhanced by optimizing perovskite composition and the device structure.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 11274213, 61205215, 61078051, and 612279002)the National Major Scientific Research Program of China (Grant No. 2012CB921601)+1 种基金the Research Project for Returned Abroad Scholars from Universities of Shanxi Province,China (Grant No. 2012-015)the Project for Excellent Research Team of the National Natural Science Foundation of China (Grant No. 61121064)
文摘We present a pair of phase-locked lasers with a 9.2-GHz frequency difference through the injection locking of a master laser to the RF-modulation sideband of a slave diode laser. Using this laser system, a coherent population trapping （CPT） signal with a typical linewidth of ～ 182 Hz is obtained in a cesium vapor cell filled with 30 Torr （4kPa） of neon as the buffer gas. We investigate the influence of the partial pressure of the neon buffer gas on the CPT linewidth, amplitude, and frequency shift. The results may offer some references for CPT atomic clocks and CPT atomic magnetometers.
文摘Chip-sized alkali atom vapor cells with high hermeticity are successfully fabricated through deep silicon etching and two anodic bonding processes.A self-built absorption spectrum testing system is used to test the absorption spectra of the ru-bidium atoms in alkali atom vapor cells.The influence of silicon cavity size,filling amount of rubidium atoms and temperature on the absorption spectra of rubidium atom vapor in the atom vapor cells are studied in depth through a theoretical analysis.This study provides a reference for the design and preparation of high quality chip-sized atom vapor cells.
基金financially supported by the National Key R&D Program of China (No. 2018YFB1502203-1)the Guangdong Basic and Applied Basic Research Foundation (No. 2021B1515120087)the Stable Supporting Fund of Shenzhen, China (No. GXWD20201230155427003-202007 28114835006)
文摘Physical vapor deposition(PVD)can be used to produce high-quality Gd_(2)O_(3)-doped CeO2(GDC)films.Among various PVD methods,reactive sputtering provides unique benefits,such as high deposition rates and easy upscaling for industrial applications.GDC thin films were successfully fabricated through reactive sputtering using a Gd_(0.2)Ce_(0.8)(at%)metallic target,and their application in solid oxide fuel cells,such as buffer layers between yttria-stabilized zirconia(YSZ)/La0.6Sr0.4Co0.2Fe0.8O_(3−δ)and as sublayers in the steel/coating system,was evaluated.First,the direct current(DC)reactive-sputtering behavior of the GdCe metallic target was determined.Then,the GDC films were deposited on NiO-YSZ/YSZ half-cells to investigate the influence of oxygen flow rate on the quality of annealed GDC films.The results demonstrated that reactive sputtering can be used to prepare thin and dense GDC buffer layers without high-temperature sintering.Furthermore,the cells with a sputtered GDC buffer layer showed better electrochemical performance than those with a screen-printed GDC buffer layer.In addition,the insertion of a GDC sublayer between the SUS441 interconnects and the Mn-Co spinel coatings contributed to the reduction of the oxidation rate for SUS441 at operating temperatures,according to the area-specific resistance tests.
基金Project supported by the National Natural Science Foundation of China(Grant No.61473166).
文摘An atomic magnetometer based on coherent population trapping(CPT) resonances in microfabricated vapor cells is demonstrated. Fabricated by the micro-electro-mechanical-system(MEMS) technology, the cells are filled with Rb and Ne at a controlled pressure. An experimental apparatus is built for characterizing properties of microfabricated vapor cells via the CPT effects. The typical CPT linewidth is measured to be about 3 k Hz(1.46 k Hz with approximately zero laser intensity) for the rubidium D1 line at about 90℃. The effects of pressure, temperature and laser intensity on CPT linewidth are studied experimentally. A closed-loop atomic magnetometer is finally finished with a sensitivity of 210.5 p T/Hz1/2 at 1 Hz bandwidth. This work paves the way for developing an integrated chip-scale atomic magnetometer in the future.
文摘We directly grow a lattice matched GalnP/GalnAs/GalnNAs/Ge （1.88 eVil .42 eVil .05 eV/0.67eV） four-junction （4J） solar cell on a Ge substrate by the metal organic chemical vapor deposition technology. To solve the current limit of the GalnNAs sub cell, we design three kinds of anti-reflection coatings and adjust the base region thickness of the GalnNAs sub cell. Developed by a series of experiments, the external quantum efficiency of the GalnNAs sub cell exceeds 80%, and its current density reaches 11.24 mA/cm2. Therefore the current limit of the 4J solar cell is significantly improved. Moreover, we discuss the difference of test results between 4J and GalnP/GalnAs/Ge solar cells under the 1 sun AMO spectrum.
基金supported in part by the National Key Research and Development Plan(2022YFB3203400)the National Natural Science Foundation of China(62103324 and U1909221)the Natural Science Foundation of Shaanxi(2022JQ-554).
文摘Existing microfabricated atomic vapor cells have only one optical channel,which is insufficient for supporting the multiple orthogonal beams required by atomic devices.In this study,we present a novel wafer-level manufacturing process for fabricating multi-optical-channel atomic vapor cells and an innovative method for batch processing the inner sidewalls of millimeter glass holes to meet optical channel requirements.Surface characterization and transmittance tests demonstrate that the processed inner sidewalls satisfy the criteria for an optical channel.In addition,the construction of an integrated processing platform enables multilayer non-isothermal anode bonding,the filling of inert gases,and the recovery and recycling of noble gases.Measurements of the absorption spectra and free-induction decay signals of xenon-129(^(129)Xe)and xenon-131(^(131)Xe)under different pump-probe schemes demonstrate the suitability of our vapor cell for use in atomic devices including atomic gyroscopes,dual-beam atomic magnetometers,and other optical/atomic devices.The proposed micromolding technology has broad application prospects in the field of optical-device processing.
