The exact solutions for the propagation of Love waves in one-dimensional(1D)hexagonal piezoelectric quasicrystal(PQC)nanoplates with surface effects are derived.An electro-elastic model is developed to investigate the...The exact solutions for the propagation of Love waves in one-dimensional(1D)hexagonal piezoelectric quasicrystal(PQC)nanoplates with surface effects are derived.An electro-elastic model is developed to investigate the anti-plane strain problem of Love wave propagation.By introducing three shape functions,the wave equations and electric balance equations are decoupled into three uncorrelated problems.Satisfying the boundary conditions of the top surface on the covering layer,the interlayer interface,and the matrix,a dispersive equation with the influence of multi-physical field coupling is provided.A surface PQC model is developed to investigate the surface effects on the propagation behaviors of Love waves in quasicrystal(QC)multilayered structures with nanoscale thicknesses.A novel dispersion relation for the PQC structure is derived in an explicit closed form according to the non-classical mechanical and electric boundary conditions.Numerical examples are given to reveal the effects of the boundary conditions,stacking sequence,characteristic scale,and phason fluctuation characteristics on the dispersion curves of Love waves propagating in PQC nanoplates with surface effects.展开更多
Circular holes are commonly employed in engineering designs;however, they often serve as locations where cracks initiate and propagate. This paper explores a novel approach to structural repair by utilizing piezoelect...Circular holes are commonly employed in engineering designs;however, they often serve as locations where cracks initiate and propagate. This paper explores a novel approach to structural repair by utilizing piezoelectric actuators. The primary focus of this study is to investigate the influence of an adhesively bonded piezoelectric actuator patch placed above a circular hole on the stress intensity factor (SIF) in an aluminium plate. The plate is subjected to uniaxial tensile stress, while the piezoelectric actuator is excited with varying voltage levels. The analysis is conducted using the finite element method (FEM), a powerful numerical technique for simulating complex structures. The study assesses the stress distribution and employs the SIF as an adequate criterion for evaluating the impact of different patch configurations. The results indicate a strong correlation between the applied voltage and the SIF. Whether the SIF increases or decreases depends on the polarization of the piezoelectric actuator. Particularly noteworthy is the finding that rectangular patches in a horizontal orientation significantly reduce the SIF compared to other patch geometries. Moreover, double-sided patches exhibit a pronounced decrease in the SIF compared to single-sided patches. In summary, this research underscores the potential of piezoelectric actuators in mitigating stress intensity in structures with circular hole with crack initiation. It offers valuable insights into the influence of applied voltage, patch geometry, and patch placement on the SIF, thereby contributing to developing effective strategies for enhancing structural integrity.展开更多
Sandwiched functionally-graded piezoelectric semiconductor(FGPS)plates possess high strength and excellent piezoelectric and semiconductor properties,and have significant potential applications in micro-electro-mechan...Sandwiched functionally-graded piezoelectric semiconductor(FGPS)plates possess high strength and excellent piezoelectric and semiconductor properties,and have significant potential applications in micro-electro-mechanical systems.The multi-field coupling and free vibration of a sandwiched FGPS plate are studied,and the governing equation and natural frequency are derived with the consideration of electron movement.The material properties in the functionally-graded layers are assumed to vary smoothly,and the first-order shear deformation theory is introduced to derive the multi-field coupling in the plate.The total strain energy of the plate is obtained,and the governing equations are presented by using Hamilton’s principle.By introducing the boundary conditions,the coupling physical fields are solved.In numerical examples,the natural frequencies of sandwiched FGPS plates under different geometrical and physical parameters are discussed.It is found that the initial electron density can be used to modulate the natural frequencies and vibrational displacement of sandwiched FGPS plates in the case of nano-size.The effects of the material properties of FGPS layers on the natural frequencies are also examined in detail.展开更多
Quasicrystals (QCs) are sensitive to the piezoelectric (PE) effect. This paper studies static deformation of a multilayered one-dimensional (1D) hexagonal QC plate with the PE effect. The exact closed-form solut...Quasicrystals (QCs) are sensitive to the piezoelectric (PE) effect. This paper studies static deformation of a multilayered one-dimensional (1D) hexagonal QC plate with the PE effect. The exact closed-form solutions of the extended displacement and traction for a homogeneous piezoelectric quasicrystal (PQC)plate are derived from an eigensystem. The general solutions for multilayered PQC plates are then obtained using the propagator matrix method when mechanical and electrical loads are applied on the top surface of the plate. Numerical examples for several sandwich plates made up of PQC, PE, and QC materials are provided to show the effect of stacking sequence on phonon, phason, and electric fields under mechanical and electrical loads, which is useful in designing new composites for engineering structures.展开更多
This paper deals with the thickness-twist vibration of a multi-layered rectangular piezoelectric plate of crystals of 6 mm symmetry or polarized ceramics. An exact solution is obtained from the three-dimensional equat...This paper deals with the thickness-twist vibration of a multi-layered rectangular piezoelectric plate of crystals of 6 mm symmetry or polarized ceramics. An exact solution is obtained from the three-dimensional equations of linear piezoelectricity. The solution is useful to the understanding and design of composite piezoelectric devices. A piezoelectric resonator, a piezoelectric transformer, and a piezoelectric generator are analyzed as examples.展开更多
The double Hopf bifurcation of a composite laminated piezoelectric plate with combined external and internal excitations is studied. Using a multiple scale method, the average equations are obtained in two coordinates...The double Hopf bifurcation of a composite laminated piezoelectric plate with combined external and internal excitations is studied. Using a multiple scale method, the average equations are obtained in two coordinates. The bifurcation response equations of the composite laminated piezoelectric plate with the primary parameter resonance, i.e., 1:3 internal resonance, are achieved. Then, the bifurcation feature of bifurcation equations is considered using the singularity theory. A bifurcation diagram is obtained on the parameter plane. Different steady state solutions of the average equations are analyzed. By numerical simulation, periodic vibration and quasi-periodic vibration responses of the Composite laminated piezoelectric plate are obtained.展开更多
The three-dimensional free vibration analysis of a multi-directional func- tionally graded piezoelectric (FGP) annular plate resting on two parameter (Pasternak) elastic foundations is investigated under different...The three-dimensional free vibration analysis of a multi-directional func- tionally graded piezoelectric (FGP) annular plate resting on two parameter (Pasternak) elastic foundations is investigated under different boundary conditions. The material properties are assumed to vary continuously along the radial and thickness directions and have exponent-law distribution. A semi-analytical approach named the state space based differential quadrature method (SSDQM) is used to provide an analytical solution along the thickness using the state space method (SSM) and an approximate solution along the radial direction using the one-dimensional differential quadrature method (DQM). The influence of the Winkler and shear stiffness of the foundation~ the material property graded variations, and the circumferential wave number on the nomdimensional natural frequency of multi-directional FGP annular plates is studied.展开更多
This research presents a finite element formulation based on four-variable refined plate theory for bending analysis of cross-ply and angle-ply laminated composite plates integrated with a piezoelectric fiber-reinforc...This research presents a finite element formulation based on four-variable refined plate theory for bending analysis of cross-ply and angle-ply laminated composite plates integrated with a piezoelectric fiber-reinforced composite actuator under electromechanical loading. The four-variable refined plate theory is a simple and efficient higher-order shear deformation theory, which predicts parabolic variation of transverse shear stresses across the plate thickness and satisfies zero traction conditions on the plate free surfaces. The weak form of governing equations is derived using the principle of minimum potential energy, and a 4-node non-conforming rectangular plate element with 8 degrees of freedom per node is introduced for discretizing the domain. Several benchmark problems are solved by the developed MATLAB code and the obtained results are compared with those from exact and other numerical solutions, showing good agreement.展开更多
The pressure reflected from a bi-laminated piezoelectric plate hasbeen determined using the Thomson-Haskell matrix method. The plate iscomposed of a piezoelectric layer with grounded vacuum and An elasticlayer in cont...The pressure reflected from a bi-laminated piezoelectric plate hasbeen determined using the Thomson-Haskell matrix method. The plate iscomposed of a piezoelectric layer with grounded vacuum and An elasticlayer in contact with the fluid. An incident plane wave in the fluidmedium strikes the plate at dif- Ferent angles. The required electricpotential across the piezoelectric layer to cancel the reflectionfrom the Fluid/elastic boundary has been determined for thepiezoelectric material PZT-5 at various thickness parame- Ters andincident frequencies.展开更多
By employing the general solution for coupled three-dimensional equations of a transversely isotropic piezoelectric body, this paper investigates the free vibration of a circular plate made of piezoelectric material. ...By employing the general solution for coupled three-dimensional equations of a transversely isotropic piezoelectric body, this paper investigates the free vibration of a circular plate made of piezoelectric material. Three-dimensional exact solutions are then obtained under two specified boundary conditions, which can be used for both axisymmetric and non-axisymmetric cases. Numerical results are finally presented.展开更多
A model of piezoelectric rectangular thin plates with the consideration of the coupled thermo-piezoelectric-mechanical effect is established. Based on the von Kar- man large deflection theory, the nonlinear vibration ...A model of piezoelectric rectangular thin plates with the consideration of the coupled thermo-piezoelectric-mechanical effect is established. Based on the von Kar- man large deflection theory, the nonlinear vibration governing equation is obtained by using Hamilton’s principle and the Rayleigh-Ritz method. The harmonic balance method (HBM) is used to analyze the first-order approximate response and obtain the frequency response function. The system shows non-linear phenomena such as hardening nonlinear- ity, multiple coexistence solutions, and jumps. The effects of the temperature difference, the damping coefficient, the plate thickness, the excited charge, and the mode on the pri- mary resonance response are theoretically analyzed. With the increase in the temperature difference, the corresponding frequency jumping increases, while the resonant amplitude decreases gradually. Finally, numerical verifications are carried out by the Runge-Kutta method, and the results agree very well with the theoretical results.展开更多
Using Reddy’s high-order shear theory for laminated plates and Hamilton’s principle, a nonlinear partial differential equation for the dynamics of a deploying cantilevered piezoelectric laminated composite plate, un...Using Reddy’s high-order shear theory for laminated plates and Hamilton’s principle, a nonlinear partial differential equation for the dynamics of a deploying cantilevered piezoelectric laminated composite plate, under the combined action of aerodynamic load and piezoelectric excitation, is introduced. Two-degree of freedom(DOF)nonlinear dynamic models for the time-varying coefficients describing the transverse vibration of the deploying laminate under the combined actions of a first-order aerodynamic force and piezoelectric excitation were obtained by selecting a suitable time-dependent modal function satisfying the displacement boundary conditions and applying second-order discretization using the Galerkin method. Using a numerical method, the time history curves of the deploying laminate were obtained, and its nonlinear dynamic characteristics,including extension speed and different piezoelectric excitations, were studied. The results suggest that the piezoelectric excitation has a clear effect on the change of the nonlinear dynamic characteristics of such piezoelectric laminated composite plates. The nonlinear vibration of the deploying cantilevered laminate can be effectively suppressed by choosing a suitable voltage and polarity.展开更多
The determination of the precise thickness-shear frequency of electroded crystal plates has practical importance in quartz crystal resonator design and fabrication, especially when the high fundamental thickness-shear...The determination of the precise thickness-shear frequency of electroded crystal plates has practical importance in quartz crystal resonator design and fabrication, especially when the high fundamental thickness-shear frequency has reduced the crystal plate thickness to such a degree that proper consideration of the effect of electrodes is very important. The electrodes effect as mass loading in the estimation of the resonance frequency has to be modified to consider the stiffness of electrodes, as the relative strength is increasingly noticeable. By following a known procedure in the determination of the thickness-shear frequency of an infinite AT-cut crystal plate, frequency equations of crystal plate without and with piezoelectric effect are obtained in terms of elastic constants and the electrode material density. After solving these equations for the usual design parameters of crystal resonators, the design process can be optimized to pinpoint the precise configuration to avoid time-consuming trial and reduction steps. Since these equations and solutions are presented for widely used materials and parameters, they can be easily integrated into the existing crystal resonator design and manufacturing processes.展开更多
Based on the theory of composite materials and phononic crystals(PCs),a large-size rectangular piezoelectric composite plate with the quasi-periodic PC structure composed of PZT-4 and epoxy is proposed in this paper.T...Based on the theory of composite materials and phononic crystals(PCs),a large-size rectangular piezoelectric composite plate with the quasi-periodic PC structure composed of PZT-4 and epoxy is proposed in this paper.This PC structure can suppress the transverse vibration of the piezoelectric composite plate so that the thickness mode is purer and the thickness vibration amplitude is more uniform.Firstly,the vibration of the model is analyzed theoretically,the electromechanical equivalent circuit diagram of three-dimensional coupled vibration is established,and the resonance frequency equation is derived.The effects of the length,width,and thickness of the piezoelectric composite plate at the resonant frequency are obtained by the analytical method and the finite element method,the effective electromechanical coupling coefficient is also analyzed.The results show that the resonant frequency can be changed regularly and the electromechanical conversion can be improved by adjusting the size of the rectangular piezoelectric plate.The effect of the volume fraction of the scatterer on the resonant frequency in the thickness direction is studied by the finite element method.The band gap in X and Y directions of large-size rectangular piezoelectric plate with quasi-periodic PC structures are calculated.The results show that the theoretical results are in good agreement with the simulation results.When the resonance frequency is in the band gap,the decoupling phenomenon occurs,and then the vibration mode in the thickness direction is purer.展开更多
Considering mass and stiffness of piezoelectric layers and damage effects of composite layers, nonlinear dynamic equations of damaged piezoelectric smart laminated plates are derived. The derivation is based on the Ha...Considering mass and stiffness of piezoelectric layers and damage effects of composite layers, nonlinear dynamic equations of damaged piezoelectric smart laminated plates are derived. The derivation is based on the Hamilton's principle, the higher- order shear deformation plate theory, von Karman type geometrically nonlinear straindisplacement relations, and the strain energy equivalence theory. A negative velocity feedback control algorithm coupling the direct and converse piezoelectric effects is used to realize the active control and damage detection with a closed control loop. Simply supported rectangular laminated plates with immovable edges are used in numerical computation. Influence of the piezoelectric layers' location on the vibration control is in- vestigated. In addition, effects of the degree and location of damage on the sensor output voltage are discussed. A method for damage detection is introduced.展开更多
This paper presents a nonlinear thickness-shear vibration model for onedimensional infinite piezoelectric plate with flexoelectricity and geometric nonlinearity.The constitutive equations with flexoelectricity and gov...This paper presents a nonlinear thickness-shear vibration model for onedimensional infinite piezoelectric plate with flexoelectricity and geometric nonlinearity.The constitutive equations with flexoelectricity and governing equations are derived from the Gibbs energy density function and variational principle.The displacement adopted here is assumed to be antisymmetric through the thickness due to the thickness-shear vibration mode.Only the shear strain gradient through the thickness is considered in the present model.With geometric nonlinearity,the governing equations are converted into differential equations as the function of time by the Galerkin method.The method of multiple scales is employed to obtain the solution to the nonlinear governing equation with first order approximation.Numerical results show that the nonlinear thickness-shear vibration of piezoelectric plate is size dependent,and the flexoelectric effect has significant influence on the nonlinear thickness-shear vibration frequencies of micro-size thin plates.The geometric nonlinearity also affects the thickness-shear vibration frequencies greatly.The results show that flexoelectricity and geometric nonlinearity cannot be ignored in design of accurate high-frequency piezoelectric devices.展开更多
Researches on parity-time(PT)symmetry in acoustic field can provide an efficient platform for controlling the travelling acoustic waves with balanced loss and gain.Here,we report a feasible design of PT-symmetric syst...Researches on parity-time(PT)symmetry in acoustic field can provide an efficient platform for controlling the travelling acoustic waves with balanced loss and gain.Here,we report a feasible design of PT-symmetric system constructed by piezoelectric composite plates with two different active external circuits.By judiciously adjusting the resistances and inductances in the external circuits,we obtain the exceptional point due to the spontaneous breaking of PT symmetry at the desired frequencies and can observe the unidirectional invisibility.Moreover,the system can be at PT exact phase or broken phase at the same frequency in the same structure by merely adjusting the external circuits,which represents the active control that makes the acoustic manipulation more convenient.Our study may provide a feasible way for manipulating acoustic waves and inspire the application of piezoelectric composite materials in acoustic structures.展开更多
Study of generalized plane strain has so far been limited to elasticity. The present is aimed at parallel development of transversely isotropic piezoelasticity. By assuming that the along depth distribution of electri...Study of generalized plane strain has so far been limited to elasticity. The present is aimed at parallel development of transversely isotropic piezoelasticity. By assuming that the along depth distribution of electric potential is linear, and that com- monly used Kane-Mindlin kinematical assumption is valid, two dimensional solution systems were deduced, for which, explicit solutions of the out-of-plane constraint factor, as well as the stress resultant concentration factor around a circular hole in a transversely isotropic piezoelectric plate subjected to remote biaxial tension are obtained. Comparisons of these formulas with their counterparts for elastic case yielded suggestions that whether the piezoelectric effect exacerbates or mitigates the stress resultant concentration greatly depends on material properties, particularly, the piezoelectric coefficients; the effect of plate thickness was extensively investigated.展开更多
Nonlinear static analysis of piezoelectric plates has been carried out using nonlinear finite element method considering electro-mechanical coupling,The geometrical nonlinearity has been taken into account and electri...Nonlinear static analysis of piezoelectric plates has been carried out using nonlinear finite element method considering electro-mechanical coupling,The geometrical nonlinearity has been taken into account and electric potential is assumed to be quadratic across the plate thickness,The governing equations are obtained using potential energy and Hamilton's principle that includes elastic and piezoelectric effects.The finite element model is derived based on constitutive equation of piezoelectric material accounting for coupling between elasticity and electric effect using higher order plate elements,Results are presented for piezoelectric plate under different mechanical boundary conditions,Numerical results for the plate are given in dimensionless graphical forms.Effects of boundary conditions on linear and nonlinear response of the plate are also studied.The numerical results obtained by the present model are in good agreement with the available solutions reported in the literature.展开更多
General solutions for coupled three dimensional equations of piezoelectric media were used in this work to obtain some analytical solutions for free vibration of piezoelectric annular plates. These solutions not only...General solutions for coupled three dimensional equations of piezoelectric media were used in this work to obtain some analytical solutions for free vibration of piezoelectric annular plates. These solutions not only satisfy the governing equations at every point in the concerned region but also satisfy the prescribed boundary conditions at every point on the boundaries. Therefore, they are three-dimensional exact. Numerical results are finally tabulated.展开更多
基金Project supported by the National Natural Science Foundation of China(Nos.12272402 and11972365)the China Agricultural University Education Foundation(No.1101-2412001)。
文摘The exact solutions for the propagation of Love waves in one-dimensional(1D)hexagonal piezoelectric quasicrystal(PQC)nanoplates with surface effects are derived.An electro-elastic model is developed to investigate the anti-plane strain problem of Love wave propagation.By introducing three shape functions,the wave equations and electric balance equations are decoupled into three uncorrelated problems.Satisfying the boundary conditions of the top surface on the covering layer,the interlayer interface,and the matrix,a dispersive equation with the influence of multi-physical field coupling is provided.A surface PQC model is developed to investigate the surface effects on the propagation behaviors of Love waves in quasicrystal(QC)multilayered structures with nanoscale thicknesses.A novel dispersion relation for the PQC structure is derived in an explicit closed form according to the non-classical mechanical and electric boundary conditions.Numerical examples are given to reveal the effects of the boundary conditions,stacking sequence,characteristic scale,and phason fluctuation characteristics on the dispersion curves of Love waves propagating in PQC nanoplates with surface effects.
文摘Circular holes are commonly employed in engineering designs;however, they often serve as locations where cracks initiate and propagate. This paper explores a novel approach to structural repair by utilizing piezoelectric actuators. The primary focus of this study is to investigate the influence of an adhesively bonded piezoelectric actuator patch placed above a circular hole on the stress intensity factor (SIF) in an aluminium plate. The plate is subjected to uniaxial tensile stress, while the piezoelectric actuator is excited with varying voltage levels. The analysis is conducted using the finite element method (FEM), a powerful numerical technique for simulating complex structures. The study assesses the stress distribution and employs the SIF as an adequate criterion for evaluating the impact of different patch configurations. The results indicate a strong correlation between the applied voltage and the SIF. Whether the SIF increases or decreases depends on the polarization of the piezoelectric actuator. Particularly noteworthy is the finding that rectangular patches in a horizontal orientation significantly reduce the SIF compared to other patch geometries. Moreover, double-sided patches exhibit a pronounced decrease in the SIF compared to single-sided patches. In summary, this research underscores the potential of piezoelectric actuators in mitigating stress intensity in structures with circular hole with crack initiation. It offers valuable insights into the influence of applied voltage, patch geometry, and patch placement on the SIF, thereby contributing to developing effective strategies for enhancing structural integrity.
基金supported by the National Natural Science Foundation of China(Nos.12172236 and 12202289)。
文摘Sandwiched functionally-graded piezoelectric semiconductor(FGPS)plates possess high strength and excellent piezoelectric and semiconductor properties,and have significant potential applications in micro-electro-mechanical systems.The multi-field coupling and free vibration of a sandwiched FGPS plate are studied,and the governing equation and natural frequency are derived with the consideration of electron movement.The material properties in the functionally-graded layers are assumed to vary smoothly,and the first-order shear deformation theory is introduced to derive the multi-field coupling in the plate.The total strain energy of the plate is obtained,and the governing equations are presented by using Hamilton’s principle.By introducing the boundary conditions,the coupling physical fields are solved.In numerical examples,the natural frequencies of sandwiched FGPS plates under different geometrical and physical parameters are discussed.It is found that the initial electron density can be used to modulate the natural frequencies and vibrational displacement of sandwiched FGPS plates in the case of nano-size.The effects of the material properties of FGPS layers on the natural frequencies are also examined in detail.
基金Project supported by the National Natural Science Foundation of China(Nos.11502123 and11262012)the Natural Science Foundation of Inner Mongolia Autonomous Region of China(No.2015JQ01)
文摘Quasicrystals (QCs) are sensitive to the piezoelectric (PE) effect. This paper studies static deformation of a multilayered one-dimensional (1D) hexagonal QC plate with the PE effect. The exact closed-form solutions of the extended displacement and traction for a homogeneous piezoelectric quasicrystal (PQC)plate are derived from an eigensystem. The general solutions for multilayered PQC plates are then obtained using the propagator matrix method when mechanical and electrical loads are applied on the top surface of the plate. Numerical examples for several sandwich plates made up of PQC, PE, and QC materials are provided to show the effect of stacking sequence on phonon, phason, and electric fields under mechanical and electrical loads, which is useful in designing new composites for engineering structures.
基金Project supported by Chinese Postdoctoral Science Foundation(No.20070410944).
文摘This paper deals with the thickness-twist vibration of a multi-layered rectangular piezoelectric plate of crystals of 6 mm symmetry or polarized ceramics. An exact solution is obtained from the three-dimensional equations of linear piezoelectricity. The solution is useful to the understanding and design of composite piezoelectric devices. A piezoelectric resonator, a piezoelectric transformer, and a piezoelectric generator are analyzed as examples.
基金Project supported by the National Natural Science Foundation of China(Nos.11402127,11290152 and 11072008)
文摘The double Hopf bifurcation of a composite laminated piezoelectric plate with combined external and internal excitations is studied. Using a multiple scale method, the average equations are obtained in two coordinates. The bifurcation response equations of the composite laminated piezoelectric plate with the primary parameter resonance, i.e., 1:3 internal resonance, are achieved. Then, the bifurcation feature of bifurcation equations is considered using the singularity theory. A bifurcation diagram is obtained on the parameter plane. Different steady state solutions of the average equations are analyzed. By numerical simulation, periodic vibration and quasi-periodic vibration responses of the Composite laminated piezoelectric plate are obtained.
文摘The three-dimensional free vibration analysis of a multi-directional func- tionally graded piezoelectric (FGP) annular plate resting on two parameter (Pasternak) elastic foundations is investigated under different boundary conditions. The material properties are assumed to vary continuously along the radial and thickness directions and have exponent-law distribution. A semi-analytical approach named the state space based differential quadrature method (SSDQM) is used to provide an analytical solution along the thickness using the state space method (SSM) and an approximate solution along the radial direction using the one-dimensional differential quadrature method (DQM). The influence of the Winkler and shear stiffness of the foundation~ the material property graded variations, and the circumferential wave number on the nomdimensional natural frequency of multi-directional FGP annular plates is studied.
文摘This research presents a finite element formulation based on four-variable refined plate theory for bending analysis of cross-ply and angle-ply laminated composite plates integrated with a piezoelectric fiber-reinforced composite actuator under electromechanical loading. The four-variable refined plate theory is a simple and efficient higher-order shear deformation theory, which predicts parabolic variation of transverse shear stresses across the plate thickness and satisfies zero traction conditions on the plate free surfaces. The weak form of governing equations is derived using the principle of minimum potential energy, and a 4-node non-conforming rectangular plate element with 8 degrees of freedom per node is introduced for discretizing the domain. Several benchmark problems are solved by the developed MATLAB code and the obtained results are compared with those from exact and other numerical solutions, showing good agreement.
基金the National Natural Science Foundation of China(No.10172039)
文摘The pressure reflected from a bi-laminated piezoelectric plate hasbeen determined using the Thomson-Haskell matrix method. The plate iscomposed of a piezoelectric layer with grounded vacuum and An elasticlayer in contact with the fluid. An incident plane wave in the fluidmedium strikes the plate at dif- Ferent angles. The required electricpotential across the piezoelectric layer to cancel the reflectionfrom the Fluid/elastic boundary has been determined for thepiezoelectric material PZT-5 at various thickness parame- Ters andincident frequencies.
基金The project supported by the National Natural Science Foundation of China (No. 19872060)
文摘By employing the general solution for coupled three-dimensional equations of a transversely isotropic piezoelectric body, this paper investigates the free vibration of a circular plate made of piezoelectric material. Three-dimensional exact solutions are then obtained under two specified boundary conditions, which can be used for both axisymmetric and non-axisymmetric cases. Numerical results are finally presented.
基金Project supported by the National Natural Science Foundation of China(No.11202190)the Natural Science Foundation for Young Scientists of Shanxi Province of China(No.201801D221037)the China Postdoctoral Science Foundation(No.2018M640373)
文摘A model of piezoelectric rectangular thin plates with the consideration of the coupled thermo-piezoelectric-mechanical effect is established. Based on the von Kar- man large deflection theory, the nonlinear vibration governing equation is obtained by using Hamilton’s principle and the Rayleigh-Ritz method. The harmonic balance method (HBM) is used to analyze the first-order approximate response and obtain the frequency response function. The system shows non-linear phenomena such as hardening nonlinear- ity, multiple coexistence solutions, and jumps. The effects of the temperature difference, the damping coefficient, the plate thickness, the excited charge, and the mode on the pri- mary resonance response are theoretically analyzed. With the increase in the temperature difference, the corresponding frequency jumping increases, while the resonant amplitude decreases gradually. Finally, numerical verifications are carried out by the Runge-Kutta method, and the results agree very well with the theoretical results.
基金supported by the National Natural Science Foundation of China (Grants 11402126, 11502122, and 11290152)the Scientific Research Foundation of the Inner Mongolia University of Technology (Grant ZD201410)
文摘Using Reddy’s high-order shear theory for laminated plates and Hamilton’s principle, a nonlinear partial differential equation for the dynamics of a deploying cantilevered piezoelectric laminated composite plate, under the combined action of aerodynamic load and piezoelectric excitation, is introduced. Two-degree of freedom(DOF)nonlinear dynamic models for the time-varying coefficients describing the transverse vibration of the deploying laminate under the combined actions of a first-order aerodynamic force and piezoelectric excitation were obtained by selecting a suitable time-dependent modal function satisfying the displacement boundary conditions and applying second-order discretization using the Galerkin method. Using a numerical method, the time history curves of the deploying laminate were obtained, and its nonlinear dynamic characteristics,including extension speed and different piezoelectric excitations, were studied. The results suggest that the piezoelectric excitation has a clear effect on the change of the nonlinear dynamic characteristics of such piezoelectric laminated composite plates. The nonlinear vibration of the deploying cantilevered laminate can be effectively suppressed by choosing a suitable voltage and polarity.
基金Project supported by the Qianjiang River Fellow Fund of ZhejiangProvince, and Bureau of Personnel and Human Resource, Ningbo,China
文摘The determination of the precise thickness-shear frequency of electroded crystal plates has practical importance in quartz crystal resonator design and fabrication, especially when the high fundamental thickness-shear frequency has reduced the crystal plate thickness to such a degree that proper consideration of the effect of electrodes is very important. The electrodes effect as mass loading in the estimation of the resonance frequency has to be modified to consider the stiffness of electrodes, as the relative strength is increasingly noticeable. By following a known procedure in the determination of the thickness-shear frequency of an infinite AT-cut crystal plate, frequency equations of crystal plate without and with piezoelectric effect are obtained in terms of elastic constants and the electrode material density. After solving these equations for the usual design parameters of crystal resonators, the design process can be optimized to pinpoint the precise configuration to avoid time-consuming trial and reduction steps. Since these equations and solutions are presented for widely used materials and parameters, they can be easily integrated into the existing crystal resonator design and manufacturing processes.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11674206,11874253,and12174240)the Fundamental Research Funds for the Central Universities,China(Grant No.020CBLY003)。
文摘Based on the theory of composite materials and phononic crystals(PCs),a large-size rectangular piezoelectric composite plate with the quasi-periodic PC structure composed of PZT-4 and epoxy is proposed in this paper.This PC structure can suppress the transverse vibration of the piezoelectric composite plate so that the thickness mode is purer and the thickness vibration amplitude is more uniform.Firstly,the vibration of the model is analyzed theoretically,the electromechanical equivalent circuit diagram of three-dimensional coupled vibration is established,and the resonance frequency equation is derived.The effects of the length,width,and thickness of the piezoelectric composite plate at the resonant frequency are obtained by the analytical method and the finite element method,the effective electromechanical coupling coefficient is also analyzed.The results show that the resonant frequency can be changed regularly and the electromechanical conversion can be improved by adjusting the size of the rectangular piezoelectric plate.The effect of the volume fraction of the scatterer on the resonant frequency in the thickness direction is studied by the finite element method.The band gap in X and Y directions of large-size rectangular piezoelectric plate with quasi-periodic PC structures are calculated.The results show that the theoretical results are in good agreement with the simulation results.When the resonance frequency is in the band gap,the decoupling phenomenon occurs,and then the vibration mode in the thickness direction is purer.
基金Project supported by the National Natural Science Foundation of China(No.10572049)
文摘Considering mass and stiffness of piezoelectric layers and damage effects of composite layers, nonlinear dynamic equations of damaged piezoelectric smart laminated plates are derived. The derivation is based on the Hamilton's principle, the higher- order shear deformation plate theory, von Karman type geometrically nonlinear straindisplacement relations, and the strain energy equivalence theory. A negative velocity feedback control algorithm coupling the direct and converse piezoelectric effects is used to realize the active control and damage detection with a closed control loop. Simply supported rectangular laminated plates with immovable edges are used in numerical computation. Influence of the piezoelectric layers' location on the vibration control is in- vestigated. In addition, effects of the degree and location of damage on the sensor output voltage are discussed. A method for damage detection is introduced.
基金Project supported by the National Natural Science Foundation of China(No.11702150)the Natural Science Foundation of Zhejiang Province of China(Nos.LY20A020002 and LY21A020003)+3 种基金the Natural Science Foundation of Ningbo(No.202003N4015)the Project of Key Laboratory of Impact and Safety Engineering(Ningbo University)the Ministry of Education(No.CJ202009)the Technology Innovation 2025 Program of Municipality of Ningbo(No.2019B10122)。
文摘This paper presents a nonlinear thickness-shear vibration model for onedimensional infinite piezoelectric plate with flexoelectricity and geometric nonlinearity.The constitutive equations with flexoelectricity and governing equations are derived from the Gibbs energy density function and variational principle.The displacement adopted here is assumed to be antisymmetric through the thickness due to the thickness-shear vibration mode.Only the shear strain gradient through the thickness is considered in the present model.With geometric nonlinearity,the governing equations are converted into differential equations as the function of time by the Galerkin method.The method of multiple scales is employed to obtain the solution to the nonlinear governing equation with first order approximation.Numerical results show that the nonlinear thickness-shear vibration of piezoelectric plate is size dependent,and the flexoelectric effect has significant influence on the nonlinear thickness-shear vibration frequencies of micro-size thin plates.The geometric nonlinearity also affects the thickness-shear vibration frequencies greatly.The results show that flexoelectricity and geometric nonlinearity cannot be ignored in design of accurate high-frequency piezoelectric devices.
基金supported by the National Key R&D Program of China(Grant No.2017YFA0303700)the National Natural Science Foundation of China(Grant Nos.11634006,11934009,and 12074184)+1 种基金the Natural Science Foundation of Jiangsu Province,China(Grant No.BK20191245)the State Key Laboratory of Acoustics,Chinese Academy of Sciences.
文摘Researches on parity-time(PT)symmetry in acoustic field can provide an efficient platform for controlling the travelling acoustic waves with balanced loss and gain.Here,we report a feasible design of PT-symmetric system constructed by piezoelectric composite plates with two different active external circuits.By judiciously adjusting the resistances and inductances in the external circuits,we obtain the exceptional point due to the spontaneous breaking of PT symmetry at the desired frequencies and can observe the unidirectional invisibility.Moreover,the system can be at PT exact phase or broken phase at the same frequency in the same structure by merely adjusting the external circuits,which represents the active control that makes the acoustic manipulation more convenient.Our study may provide a feasible way for manipulating acoustic waves and inspire the application of piezoelectric composite materials in acoustic structures.
基金Project (Nos. 10172003 and 10372003) supported by the NationalNatural Science Foundation of China
文摘Study of generalized plane strain has so far been limited to elasticity. The present is aimed at parallel development of transversely isotropic piezoelasticity. By assuming that the along depth distribution of electric potential is linear, and that com- monly used Kane-Mindlin kinematical assumption is valid, two dimensional solution systems were deduced, for which, explicit solutions of the out-of-plane constraint factor, as well as the stress resultant concentration factor around a circular hole in a transversely isotropic piezoelectric plate subjected to remote biaxial tension are obtained. Comparisons of these formulas with their counterparts for elastic case yielded suggestions that whether the piezoelectric effect exacerbates or mitigates the stress resultant concentration greatly depends on material properties, particularly, the piezoelectric coefficients; the effect of plate thickness was extensively investigated.
文摘Nonlinear static analysis of piezoelectric plates has been carried out using nonlinear finite element method considering electro-mechanical coupling,The geometrical nonlinearity has been taken into account and electric potential is assumed to be quadratic across the plate thickness,The governing equations are obtained using potential energy and Hamilton's principle that includes elastic and piezoelectric effects.The finite element model is derived based on constitutive equation of piezoelectric material accounting for coupling between elasticity and electric effect using higher order plate elements,Results are presented for piezoelectric plate under different mechanical boundary conditions,Numerical results for the plate are given in dimensionless graphical forms.Effects of boundary conditions on linear and nonlinear response of the plate are also studied.The numerical results obtained by the present model are in good agreement with the available solutions reported in the literature.
文摘General solutions for coupled three dimensional equations of piezoelectric media were used in this work to obtain some analytical solutions for free vibration of piezoelectric annular plates. These solutions not only satisfy the governing equations at every point in the concerned region but also satisfy the prescribed boundary conditions at every point on the boundaries. Therefore, they are three-dimensional exact. Numerical results are finally tabulated.