电动汽车电控液压制动系统CarSim/Simulink联合仿真研究

针对某款国产电动汽车的电控液压制动系统,文章基于滑移率的比例-积分-微分(PID)控制提出了防抱死制动系统(ABS)模型,以改善车辆制动性能,提高在对开路面上的制动有效性和安全性。首先,使用Simulink软件建立液压电控制动系统的动力学模型;然后,基于滑移率设计PID控制器,并通过1/4车辆模型验证其有效性;最后,利用S函数将ABS控制器的Simulink模型输入CarSim平台中,开展CarSim/Simulink双平台联合控制仿真。结果表明,基于滑移率的PID控制的ABS对比无ABS的车辆,制动性能更加优越,在对开路面上制动稳定性更加明显。

一种MAKLINK图多节点链路建模的路径规划研究

针对传统MAKLINK图规划路径线路改变时,其最优化路径易与环境约束条件冲突的问题,提出了在MAKLINK图中各链路上增加节点数目的方法,以提高系统建模的适应性和鲁棒性。设计的多节点链路通过dijkstra算法得到更为理想的次优化路径,由蚁群算法进行迭代计算获得最优化路径,实现了在保证路径适应度的前提下,提高优化路径对环境约束条件的适应性。实验结果表明,与基本MAKLINK图路径规划算法相比,多节点链路的建模路径规划算法可有效提高次优路径的建模精度,最优路径的适应度值较单节点链路减小了1.43%,具有一定的建模优势。

All-fiber linearly polarized laser oscillator by fiber coiling loss control

In this paper,we demonstrate an all-fiber linearly polarized fiber laser oscillator.The single polarization of the oscillator is achieved through the careful designing of the active fiber coiling.The relationship between fiber coiling diameter and polarization extinction ratio and optical efficiency is studied,whose results lead to an optimized system.The thermal management of the oscillator is also refined,which allows the oscillator to reach a maximum output power of44.1 W with an optical-to-optical efficiency of 57.9%.A high average polarization extinction ratio of 21.6 d B is achieved during a 2-hour stability test.The oscillator also owns a narrow 3-d B bandwidth of 0.1 nm,as well as near-diffraction-limit beam quality of M^2～ 1.14.

Fabrication of Tm-Doped Fibers for High Power and 121W Output All-Fiber Tm-Doped Fiber Laser

We fabricate the Tm-doped double cladding silica fiber by using the vapor-solution hybrid-doping method, then build up an all-fiber Tin-doped fiber laser which can provide the output power of up to 121 W, corresponding to a slope efficiency of 51% and an optical-optical efficiency of 48%. By using the domestic Tin-doped fiber, it is the first time a hundred-watt level output at 1915nm has been achieved, to the best of our knowledge. The thermal effect of Tm-doped fiber laser is also analyzed.

The 266-nm ultraviolet-beam generation of all-fiberized super-large-mode-area narrow-linewidth nanosecond amplifier with tunable pulse width and repetition rate

We report on a compact, stable, all-fiberized narrow-linewidth(0.045 nm) pulsed laser source emitting laser beam with a wavelength of 266 nm, and tunable pulse width and repetition rate. The system is based on all-fiberized nanosecond amplifier architecture, which consists of Yb-doped fiber preamplifiers and a super-large-mode-area Yb-doped fiber power amplifier. The fiber amplifier with a core of 50 μm is used to raise the threshold of the stimulated Brillouin scattering(SBS) effect and to obtain high output power and single pulse energy. Using lithium triborate(LBO) crystal and betabarium borate(BBO) crystal for realizing the second-harmonic generation(SHG) and fourth-harmonic generation(FHG),we achieve 17 μJ(1.73 W) and 0.66 μJ(66 mW), respectively, at wavelengths of 532 nm and 266 nm and a repetition rate of 100 kHz with pulse width of 4 ns. This source has great potential applications in fluorescence research and solar-blind ultraviolet optical communication.

Design and applicability analysis of independent double acquisition circuit of all-fiber optical current transformer

The advantages of the all-fiber optical current transformer include but are not limited to being small in size,having no magnetic saturation,exhibiting high measurement accuracy,and boasting strong electromagnetic interference resistance.However,the high cost of the all-fiber optical transformer limits its promotion and application in engineering.This paper proposes a design scheme of an independent double acquisition loop for the all-fiber optical current transformer based on the single optical path.Firstly,based on the closed-loop control mode and open-loop control mode,the twochannel sampling signal demand for relay protection,and the independent dual-acquisition loop design scheme of the all-fiber optical current transformer are proposed.Secondly,the reliability and economic feasibility of the scheme are demonstrated by an analysis of system failure and cost.The results show that the scheme can actualize the acquisition function of two independent all-fiber optical current transformer products on a single all-fiber current transformer in an integrated manner,which greatly reduces the cost of the all-fiber optical current transformer in engineering applications.

Erbium-Doped Zirconia-Alumina Silica Glass-Based Fiber as a Saturable Absorber for High Repetition Rate Q-Switched All-Fiber Laser Generation

We propose and demonstrate a Q-switched erbium-doped fiber laser （EDFL） using an erbium-doped zirconia-alumina silica glass-based fiber （Zr-EDF） as a saturable absorber. As a 16-cm-long Zr-EDF is incorporated into a ring EDFL cavity, a stable Q-switching pulse train operating at 1565？nm wavelength is successfully obtained. The repetition rate is tunable from 33.97？kHz to 71.23？kHz by increasing the pump power from the threshold of 26？mW to the maximum of 74？mW. The highest pulse energy of 26.67？nJ is obtained at the maximum pump power.

A kW Continuous-Wave Ytterbium-Doped All-Fiber Laser Oscillator with Domestic Fiber Components and Gain Fiber

We demonstrate a kW continuous-wave ytterbium-doped all-fiber laser oscillator with M1 domestic fiber compo- nents： a 7× I fused fiber bundle combiner, a fiber Bragg grating and a double-clad gain fiber. The oscillator operates at 1079.48nrn with 80.94% slope efficiency and shows no limit of temperature and nonlinear effects. These indicate that the passive fiber components and the gain fiber are all qualified for the high power environ- ment. No evidence of the signal power roll-over shows that this oscillator possesses the capacity to higher output with available pump power.

面向Link16的QualNet与虚拟机信息交互接口设计与实现

Link16是美国国防部采用的高速视距战术数据链,广泛应用于美国海军、联合部队和北约部队,针对其开展测试评估具有重要军事意义。通过硬件在环技术将Link16实物设备接入到仿真测试中,可有效提高测试结果的真实性和准确性。然而当测试场景需要进行实物设备组网测试时,仍会带来成本问题。为此,提出一种面向QualNet MAC层的Link16专属模型以及与之匹配的虚拟机信息交互接口。该模型可高逼真模拟Link16通信行为,实现Link16节点竞争接入、时隙划分、NPG分组等功能。并基于数据分布式服务实现了虚拟机交互接口,将运行在虚拟机的Link16设备模型接入QualNet测试场景。实验测试结果表明,所设计模型具有较高真实性和准确性且接口引入延时不超过1 ms,为大规模数据链网络测试提供一种新方法。

A 168-W high-power single-frequency amplifier in an all-fiber configuration

We present a high-power, single-frequency, narrow linewidth fiber amplifier based on master oscillator power amplification chains in an all-fiber configuration. The effect of the delivery fiber on the maximum output power is studied. A home-made 1064-nm seed laser with a 20-kHz linewidth is boosted to 129 W, and limited by stimulated Brillouin scattering （SBS） when the delivery fiber is 1.2 m long By shortening the delivery fiber length to 0.7 m, the SBS threshold is increased efficiently and the maximum output power rises to 168 W with an 82.9% power conversion efficiency. The experimental results indicate that the output power can be further raised by shortening the delivery fiber length and increasing the pump power.

Sequential generation of self-starting diverse operations in all-fiber laser based on thulium-doped fiber saturable absorber

Self-starting Q-switching,Q-switched mode-locking and mode-locking operation modes are achieved sequentially in an all-fiber erbium-doped fiber laser with thulium-doped fiber saturable absorber for the first time.The central wavelengths of Q-switching,Q-switched mode-locking and mode-locking operation modes are 1569.7 nm,1570.9 nm,and 1572 nm,respectively.The mode-locking operation of the proposed fiber laser generates stable dark soliton with a repetition rate of 0.99 MHz and signal-to-noise ratio of 65 dB.The results validate the capability of generating soliton pulse by doped fiber saturable absorber.Furthermore,the proposed fiber laser is beneficial to the applications of optical communication and signal processing system.

An Efficient Single-Frequency Yb-Doped All-Fiber MOPA Laser at 1064.3 nm

An efficient narrow=linewidth single-frequency （SF） Yb-doped all-fiber master oscillator power amplifier （MOPA） laser operating at 1064.3 nm is demonstrated experimentally. A ring cavity SF fiber laser is used as the seed source for the MOPA system and the Yb-doped fibers are employed as the gain medium or the saturable absorber. The SF operation is observed to be stable without mode hopping. The highest output power of 266 mW is obtained under the 400row pump power with the corresponding slope efficiency of 66.2-. The Hnewidth of the amplified output laser is approximately I kHz and its optical signal-to-noise ratio is over 45 dB.

Wavelength-Tunable Rectangular Pulses Generated from All-Fiber Mode-Locked Laser Based on Semiconductor Saturable Absorber Mirror

The wavelength-tunable rectangular mode-locking operation is demonstrated in an all-fiber laser based on semi- conductor saturable absorber mirror. As the dissipative soliton resonance signature, the pulse duration varies from 5SOps to 2.1 ns as a function o~ the increasing pump power. Correspondingly, the maximum pulse energy is 9.11 n3. Moreover, it is found that the wavelength tunable operation with a range of approximately 10 nm could be obtained by properly adjusting the polarization controllers. The characteristics of the rectangular pulses at different wavelengths are similar to each other. The demonstration of the wavelength tunable rectangular pulses would be beneficial to some applications for many fields such as spectroscopy and sensing research.

All-fiberized very-large-mode-area Yb-doped fiber based high-peak-power narrow-linewidth nanosecond amplifier with tunable pulse width and repetition rate

We demonstrate an all-fiberized narrow-linewidth nanosecond amplifier with high peak power,tunable pulse width,and repetition rate.A fiber-coupled narrow-linewidth laser diode operating at 1064.1 nm is employed as the seed source,which is gain-switched to generate nanosecond pulses with tunable pulse widths of 1-200 ns and tunable repetition rates of10 Hz-100 kHz.By utilizing a very-large-mode-area Yb-doped fiber with a core diameter of 50 μm in the power amplifier,thresholds of the stimulated Brillouin scattering at different pulse widths and repetition rates are increased.The maximum average power reaches 30.8 W at the pulse width of 4 ns and a repetition rate of 100 kHz,corresponding to an optical-tooptical conversion efficiency of ~55.2%.Pulse energy and peak power are calculated to be 0.2 mJ and 50 kW,respectively,which are limited by stimulated Brillouin scattering.The 3-dB spectral linewidth remains around 0.05 nm during the power scaling process.The stimulated Brillouin scattering limited output powers at different pulse widths and repetition rates are investigated.Peak power of 47.5 kW(0.19 mJ) is obtained for the 4 ns pulses at a repetition rate of 50 kHz,which is nearly the same as that of 4 ns pulses at 100 kHz.When the pulse width of the seed source is increased to 8 ns,peak powers/pulse energies are decreased to 19.6 kW/0.11 mJ and 13.3 kW/0.08 mJ at repetition rates of 50 kHz and 100 kHz,respectively.

Coherent optical frequency transfer via 972-km fiber link

We demonstrate coherent optical frequency dissemination over a distance of 972 km by cascading two spans where the phase noise is passively compensated for.Instead of employing a phase discriminator and a phase locking loop in the conventional active phase control scheme,the passive phase noise cancellation is realized by feeding double-trip beat-note frequency to the driver of the acoustic optical modulator at the local site.This passive scheme exhibits fine robustness and reliability,making it suitable for long-distance and noisy fiber links.An optical regeneration station is used in the link for signal amplification and cascaded transmission.The phase noise cancellation and transfer instability of the 972-km link is investigated,and transfer instability of 1.1×10^(-19)at 10^(4)s is achieved.This work provides a promising method for realizing optical frequency distribution over thousands of kilometers by using fiber links.

High-energy femtosecond Yb-doped all-fiber monolithic chirped-pulse amplifier at repetition rate of 1 MHz

A high-energy femtosecond all ytterbium fiber amplifier based on a chirped-pulse amplification（CPA） technique at a repetition rate of 1 MHz seeded by a dispersion-management mode-locked picosecond broadband oscillator is studied.We find that the compressed pulse duration is dependent on the amplified energy,the pulse duration of 804 fs corresponds to the maximum amplified energy of 10.5 μJ,while the shortest pulse duration of 424 fs corresponds to the amplified energy of 6.75 μJ.The measured energy fluctuation is approximately 0.46% root mean square（RMS） over 2 h.The low-cost femtosecond fiber laser source with super-stability will be widely used in industrial micromachines,medical therapy,and scientific studies.

一种改进的Link16信号检测方法

直接序列扩频、高速跳频与跳时相结合的技术,造成了对Link16信号的检测具有相当的难度。文中针对突发Link16信号脉冲宽度强规律性,借鉴双滑动窗算法在突发信号检测上的应用,提出了改进后基于相关处理的双滑动窗Link16信号检测方法,该方法可实现复杂电磁环境下对Link16信号的高灵敏度、高概率检测,同时正确估算出脉宽、码速率等参数信息。仿真实验数据验证了理论分析的正确性和所述方法的有效性,相较于其他Link16信号检测方法,改进后的基于相关处理的双滑动窗检测算法明显提高了在低信噪比下对Link16信号的检测能力。

Corneal collagen cross-linking in patients with keratoconus from the Dresden protocol to customized solutions:theoretical basis

Keratoconus is an ectatic condition characterized by gradual corneal thinning,corneal protrusion,progressive irregular astigmatism,corneal fibrosis,and visual impairment.The therapeutic options regarding improvement of visual function include glasses or soft contact lenses correction for initial stages,gas-permeable rigid contact lenses,scleral lenses,implantation of intrastromal corneal ring or corneal transplants for most advanced stages.In keratoconus cases showing disease progression corneal collagen crosslinking(CXL)has been proven to be an effective,minimally invasive and safe procedure.CXL consists of a photochemical reaction of corneal collagen by riboflavin stimulation with ultraviolet A radiation,resulting in stromal crosslinks formation.The aim of this review is to carry out an examination of CXL methods based on theoretical basis and mathematical models,from the original Dresden protocol to the most recent developments in the technique,reporting the changes proposed in the last 15y and examining the advantages and disadvantages of the various treatment protocols.Finally,the limits of non-standardized methods and the perspectives offered by a customization of the treatment are highlighted.

基于GS1 Digital Link的Web编码构建与案例应用

为探索GS1 Digital Link技术在产品物流中的应用潜力,分析研究了GS1系统和GS1 Digital Link的基本结构、编码特点以及技术优势,充分利用GS1 Digital Link技术可以为产品从源头到零售整个物流过程提供相关对象的Web地址编码的特点,以鲜活大闸蟹物流过程为例,构建了基于GS1 Digital Link的鲜活大闸蟹Web编码,为实现产品营销与追溯提供了标准化、动态化、多样化的编码数据支撑。

Time Transfer in a 1839-km Telecommunication Fiber Link Demonstrating a Picosecond-Scale Stability

An implementation of high-precision time transfer over a 1839-km field fiber loop back link between two provincial capitals of China,Xi’an and Taiyuan,is reported.Time transfer stabilities of 6.5 ps at averaging time of 1 s and 4.6 ps at 40000 s were achieved.The uncertainty for the time transfer system was evaluated,showing a budget of 56.2 ps.These results stand for a significant milestone in achieving high-precision time transfer over a field fiber link spanning thousands of kilometers,signifying a record-breaking achievement for the real-field time transfer in both stability and distance,which paves the way for constructing the nationwide high-precision time service via fiber network.