The experimental study of natural convection in allglass evacuated tube solar collectors is performed through the experimental platform of the solar-assisted fuel cell system.The experimental facility includes solar c...The experimental study of natural convection in allglass evacuated tube solar collectors is performed through the experimental platform of the solar-assisted fuel cell system.The experimental facility includes solar collectors with different length and diameter tubes, different coating materials, and with / without guide plates, respectively. Threedimensional mathematical models on natural and forced convections in the solar collectors are established and the experimental data is validated by field synergy and entransy principles. The results of natural convection show that the water temperature increases and thermal efficiency decreases gradually with the evacuated tube length. The thermal efficiency increases when absorption rates increase from 0. 95 to 1. 0 and emission rates decrease from 0. 16 to 0. 06. The thermal efficiency of solar collectors is increased after being equipped with the guide plate, which is attributed to the disappearance of the mixed flowand the enhancement of the heat transfer at the bottom of the evacuated tube. The results of forced convertion indicate that the Reynolds, Nusselt and entransy increments of the horizontal double collectors are higher than those of the vertical single collector while the entransy dissipation is lower than that of the vertical single collector. It is concluded that the solar collectors with guide plates are suitable for natural convection while the double horizontal collectors are suitable for forced convection in the thermal field of solar-assisted fuel cell systems with lowand medium temperatures.展开更多
Evacuated tube transportation （ETT） will be one of the ultra-large-scale vacuum application areas. This paper lists some key vacuum technology issues in ETT： （1） how to construct ultra-large-scale vacuum chamber ...Evacuated tube transportation （ETT） will be one of the ultra-large-scale vacuum application areas. This paper lists some key vacuum technology issues in ETT： （1） how to construct ultra-large-scale vacuum chamber with lower cost and high reliability, （2） how to evacuate gas out of the ETT tube in short time, （3） how to release heat or reduce temperature in the vacuum tube, （4） how to avoid vacuum discharge, （5） how to make vehicles with airproof shells and life support system, and （6） how to detect leaks and find leak positions efficiently. At the same time, some solutions are proposed.展开更多
The aim of this study was to provide a simple, easy-to-use incubation system for small-scale rural poultry farmers far from the electricity grid. To this end, a naturally ventilated solar thermal incubator was built a...The aim of this study was to provide a simple, easy-to-use incubation system for small-scale rural poultry farmers far from the electricity grid. To this end, a naturally ventilated solar thermal incubator was built and experimentally tested. A U-shaped evacuated tube collector and a wooden crate holding 50 eggs were used to build the solar thermal incubator. Water was used as the heat transfer fluid, and an EPCM was integrated into the incubation chamber for operation at night or when the sun was hidden. The heat generated by the solar collector and stored in the heat transfer fluid is transported to the incubation chamber by thermosiphon to heat the chamber. Temperature and humidity probes powered by a solar panel were placed at various locations to monitor the thermo-hygrometric efficiency of the incubation system. The incubator, heated by natural convection, proved to function normally, and the incubation chamber was maintained throughout the incubation period within a temperature range of 35.53˚C to 39.53˚C and relative humidity averaging 49.4% to 68.5%. The experiment was carried out by introducing 30 eggs and the results of the experimental study showed that the incubator’s efficiency was 87%. The performance tests gave a fertility rate of 93% and a hatching rate of 93%, i.e. 28 fertile eggs and 26 hatched eggs, respectively.展开更多
基金The National Natural Science Foundation of China(No.51376110,51541604)the Major International(Regional) Joint Research Project of the National Natural Science Foundation of China(No.61320106011)
文摘The experimental study of natural convection in allglass evacuated tube solar collectors is performed through the experimental platform of the solar-assisted fuel cell system.The experimental facility includes solar collectors with different length and diameter tubes, different coating materials, and with / without guide plates, respectively. Threedimensional mathematical models on natural and forced convections in the solar collectors are established and the experimental data is validated by field synergy and entransy principles. The results of natural convection show that the water temperature increases and thermal efficiency decreases gradually with the evacuated tube length. The thermal efficiency increases when absorption rates increase from 0. 95 to 1. 0 and emission rates decrease from 0. 16 to 0. 06. The thermal efficiency of solar collectors is increased after being equipped with the guide plate, which is attributed to the disappearance of the mixed flowand the enhancement of the heat transfer at the bottom of the evacuated tube. The results of forced convertion indicate that the Reynolds, Nusselt and entransy increments of the horizontal double collectors are higher than those of the vertical single collector while the entransy dissipation is lower than that of the vertical single collector. It is concluded that the solar collectors with guide plates are suitable for natural convection while the double horizontal collectors are suitable for forced convection in the thermal field of solar-assisted fuel cell systems with lowand medium temperatures.
基金provided by National Natural Science Foundation of China (No.50678152)Scientific Plan Fund of Shaanxi Province (No.2009K09-24)
文摘Evacuated tube transportation （ETT） will be one of the ultra-large-scale vacuum application areas. This paper lists some key vacuum technology issues in ETT： （1） how to construct ultra-large-scale vacuum chamber with lower cost and high reliability, （2） how to evacuate gas out of the ETT tube in short time, （3） how to release heat or reduce temperature in the vacuum tube, （4） how to avoid vacuum discharge, （5） how to make vehicles with airproof shells and life support system, and （6） how to detect leaks and find leak positions efficiently. At the same time, some solutions are proposed.
文摘The aim of this study was to provide a simple, easy-to-use incubation system for small-scale rural poultry farmers far from the electricity grid. To this end, a naturally ventilated solar thermal incubator was built and experimentally tested. A U-shaped evacuated tube collector and a wooden crate holding 50 eggs were used to build the solar thermal incubator. Water was used as the heat transfer fluid, and an EPCM was integrated into the incubation chamber for operation at night or when the sun was hidden. The heat generated by the solar collector and stored in the heat transfer fluid is transported to the incubation chamber by thermosiphon to heat the chamber. Temperature and humidity probes powered by a solar panel were placed at various locations to monitor the thermo-hygrometric efficiency of the incubation system. The incubator, heated by natural convection, proved to function normally, and the incubation chamber was maintained throughout the incubation period within a temperature range of 35.53˚C to 39.53˚C and relative humidity averaging 49.4% to 68.5%. The experiment was carried out by introducing 30 eggs and the results of the experimental study showed that the incubator’s efficiency was 87%. The performance tests gave a fertility rate of 93% and a hatching rate of 93%, i.e. 28 fertile eggs and 26 hatched eggs, respectively.
