An all-optical buffer based on polarization rotation in an EAM

A theoretical model of the refractive index changes of the TE and TM modes in an electro-absorption modulator （EAM） is deduced. The photon absorption and refractive index changes are analyzed numerically. The influence of pump intensity on the phase difference between the TE and TM modes is studied. The polarization rotation effect is obtained in the EAM, and a novel all-optical fiber loop buffer is designed.

High-efficiency ultra-fast all-optical photonic crystal diode based on the lateral-coupled nonlinear elliptical defect

An all-optical Fano-like diode featuring a nonlinear lateral elliptical micro-cavity and a reflecting column in the photonic crystal waveguide is proposed.The asymmetric micro-cavity is constructed by removing one rod and changing the shape of the lateral rod from a circle to an ellipse.A reflecting pillar is also introduced into the waveguide to construct an F-P cavity with the elliptical defect and enhance the asymmetric transmission for the incident light wave transmitting rightwards and leftwards,respectively.By designing the size of the ellipse and optimizing a reflecting rod at a suitable position,a maximum forward light transmittance of-1.14 dB and a minimum backward transmittance of-57.66 dB are achieved at the working wavelength of 1550.47 nm.The corresponding response time is about 10 ps when the intensity of the pump light beam resonant at 637 nm is 3.97 W/μm2.

High-performance chiral all-optical OR logic gate based on topological edge states of valley photonic crystal

For all-optical communication and information processing,it is necessary to develop all-optical logic gates based on photonic structures that can directly perform logic operations.All-optical logic gates have been demonstrated based on conventional waveguides and interferometry,as well as photonic crystal structures.Nonetheless,any defects in those structures will introduce high scattering loss,which compromises the fidelity and contrast ratio of the information process.Based on the spin-valley locking effect that can achieve defect-immune unidirectional transmission of topological edge states in valley photonic crystals(VPCs),we propose a high-performance all-optical logic OR gate based on a VPC structure.By tuning the working bandwidth of the two input channels,we prevent interference between the two channels to achieve a stable and high-fidelity output.The transmittance of both channels is higher than 0.8,and a high contrast ratio of 28.8 dB is achieved.Moreover,the chirality of the logic gate originated from the spin-valley locking effect allows using different circularly polarized light as inputs,representing“1”or“0”,which is highly desired in quantum computing.The device’s footprint is 18μm×12μm,allowing high-density on-chip integration.In addition,this design can be experimentally fabricated using current nanofabrication techniques and will have potential applications in optical communication,information processing,and quantum computing.

Optically Digitalized Holography: A Perspective for All-Optical Machine Learning

Holography, which was invented by Dennis Gabor in 1948, offers an approach to reconstructing both the amplitude and phase information of a three-dimensional (3D) object [1]. Since its invention, the concept of holography has been widely used in various fields, such as microscopy [2], interferometry [3], ultrasonography [4], and holographic display [5]. Optical holography can be divided into two steps: recording and reconstruction. A conventional hologram is recorded onto a photosensitive film as the interference between an object beam carrying the 3D object information and a reference beam. Thereafter, the original object wavefront is reconstructed in the 3D image space by illuminating the reference beam on the recorded hologram.

All-optically integrated photoacoustic and optical coherence tomography:A review

All-optically integrated photoacoustic(PA)and optical coherence tomography(OCT)dualmode imaging technology that could o®er comprehensive pathological information for accurate diagnosis in clinic has gradually become a promising imaging technology in the aspect of biomedical imaging during the recent years.This review refers to the technology aspects of alloptical PA detection and system evolution of optically integrated PA and OCT,including Michelson interferometer dual-mode imaging system,Fabry–Perot(FP)interferometer dualmode imaging system and Mach–Zehnder interferometer dual-mode imaging system.It is believed that the optically integrated PA and OCT has great potential applications in biomedical imaging.

All-optical computing based on convolutional neural networks

The rapid development of information technology has fueled an ever-increasing demand for ultrafast and ultralow-en-ergy-consumption computing.Existing computing instruments are pre-dominantly electronic processors,which use elec-trons as information carriers and possess von Neumann architecture featured by physical separation of storage and pro-cessing.The scaling of computing speed is limited not only by data transfer between memory and processing units,but also by RC delay associated with integrated circuits.Moreover,excessive heating due to Ohmic losses is becoming a severe bottleneck for both speed and power consumption scaling.Using photons as information carriers is a promising alternative.Owing to the weak third-order optical nonlinearity of conventional materials,building integrated photonic com-puting chips under traditional von Neumann architecture has been a challenge.Here,we report a new all-optical comput-ing framework to realize ultrafast and ultralow-energy-consumption all-optical computing based on convolutional neural networks.The device is constructed from cascaded silicon Y-shaped waveguides with side-coupled silicon waveguide segments which we termed“weight modulators”to enable complete phase and amplitude control in each waveguide branch.The generic device concept can be used for equation solving,multifunctional logic operations as well as many other mathematical operations.Multiple computing functions including transcendental equation solvers,multifarious logic gate operators,and half-adders were experimentally demonstrated to validate the all-optical computing performances.The time-of-flight of light through the network structure corresponds to an ultrafast computing time of the order of several picoseconds with an ultralow energy consumption of dozens of femtojoules per bit.Our approach can be further expan-ded to fulfill other complex computing tasks based on non-von Neumann architectures and thus paves a new way for on-chip all-optical computing.

All-optical logic devices based on black arsenic-phosphorus with strong nonlinear optical response and high stability

The Kerr nonlinearity in two-dimensional(2D)nanomaterials is emerging as an appealing and intriguing research area due to their prominent light processing,modulation,and manipulation abilities.In this contribution,2D black arsenic-phosphorus(B-AsP)nanosheets(NSs)were applied in nonlinear photonic devices based on spatial self-phase modula-tion(SSPM)method.By applying the Kerr nonlinearity in 2D B-AsP,an all-optical phase-modulated system is proposed to realize the functions of“on”and“off”in all-optical switching.By using the same all-optical phase-modulated system,another optical logic gate is proposed,and the logical“or”function is obtained based on the 2D B-AsP NSs dispersions.Moreover,by using the SSPM method,a 2D B-AsP/SnS_(2) hybrid structure is fabricated,and the result illustrates that the hybrid structure possesses the ability of the unidirectional nonlinear excitation,which helps in obtaining the function of spatial asymmetric light propagation.This function is considered an important prerequisite for the realization of diode functionalization,which is believed to be a factor in important basis for the design of isolators as well.The initial investig-ations indicate that 2D B-AsP is applicable for designing optical logical devices,which can be considered as an import-ant development in all-optical information processing.

All-optical switching and nonlinear optical properties of HBT in ethanol solution

This paper demonstrates an all-optical switching model system comprising a single pulsed pump beam at 355 nm and a CW He-Ne signal beam at 632.8 nm with 2-（2＇-hydroxyphenyl）benzothiazole （HBT） in ethanol solution. The origins of the optical switching effect were discussed. By the study of nonlinear optical properties for HBT in ethanol solvent, this paper verified that the excited-state intramolecular proton transfer （ESIPT） effect of HBT and the thermal effect of solvent worked on quite different time scales and together induced the change of the refractive index of HBT solution, leading to the signal beam deflection. The results indicated that the HBT molecule could be an excellent candidate for high-speed and high-sensitive optical switching devices.

Mid-infrared supercontinuum generation and its application on all-optical quantization with different input pulses

Supercontinuum generation(SCG) and its application on all-optical quantization of all-optical analog-to-digital conversions(AOADCs) at the mid-infrared region in an Al GaAs strip waveguide are investigated numerically. The simulation results show that when the parabolic pulse is input, not only broader and higher-coherence SCG is obtained and a higher effective number of bits(ENOB) can be achieved, compared with the input pulse with hyperbolic-secant and Gaussian shaping. A four-bit quantization resolution is achieved along with a signal-to-noise ratio of 24.02 dB and an ENOB of3.99 bit, and the required input peak power is 760 mW.

Boron quantum dots all-optical modulator based on efficient photothermal effect

All-optical devices without external electronic components have drawn extraordinary attentions in all-optical communication.In this work,boron quantum dots(BQDs)were synthesized by a facile liquid-phase exfoliation method.The as-prepared BQDs showed good structural homogeneity and crystallinity,broadband optical absorption as well as excellent photothermal properties.Femtosecond-resolved transient absorption further revealed the short carrier relaxation time of BQDs.Inspired by the outstanding photothermal properties and ultrafast carrier dynamic of BQDs,we fabricated BQDsbased all-optical modulator.The phase shift with a slope efficiency of 0.032π/m W and response time of 0.97 ms can be achieved.The modulator was used in laser resonance cavity to achieve all-optical actively Q-switched laser operation with control repetition rate.This prototypical BQDs-based all-optical modulator shows a great potential to be applied in all-optical information processing and communication.

Controllable all-optical stochastic logic gates and their delay storages based on the cascaded VCSELs with optical-injection

Using the dynamical properties of the polarization bistability that depends on the detuning of the injected light,we propose a novel approach to implement reliable all-optical stochastic logic gates in the cascaded vertical cavity surface emitting lasers（VCSELs） with optical-injection.Here,two logic inputs are encoded in the detuning of the injected light from a tunable CW laser.The logic outputs are decoded from the two orthogonal polarization lights emitted from the optically injected VCSELs.For the same logic inputs,under electro-optic modulation,we perform various digital signal processing（NOT,AND,NAND,XOR,XNOR,OR,NOR） in the all-optical domain by controlling the logic operation of the applied electric field.Also we explore their delay storages by using the mechanism of the generalized chaotic synchronization.To quantify the reliabilities of these logic gates,we further demonstrate their success probabilities.

Setup of a dipole trap for all-optical trapping

Micromotion induced by the radio-frequency field contributes greatly to the systematic frequency shifts of optical frequency standards.Although different strategies for mitigating this effect have been proposed,trapping ions optically has the potential to provide a generic solution to the elimination of micromotion.This could be achieved by trapping a single ion in the dipole trap composed of a highpower laser field.Here,we present the setup of the dipole trap composed of a 532 nm laser at a power of 10 W aiming to optically trap a single^(40)Ca^(+)and we observe an AC-Stark shift of the fluorescence spectrum line of~22 MHz caused by the 532 nm dipole beam.The beam waist of the dipole laser is several microns,which would provide a dipole potential strong enough for all-optical trapping of a single^(40)Ca^(+)ion.

All-Optical Vector Cesium Magnetometer

Based on power modulation of a pump laser and precessional projection detection, we present an all-optical vector magnetometer of cesium, which has a demonstrated magnitude sensitivity of 80fF/Hz^1/2 and an orientation sensitivity of 0.1°/Hz^1/2. In the device, four main factors are measured experimentally, which are the Larmor precession frequency of a polarized magnetic moment that depends on the modulus of the measured m^gnetic field only, two phase shifts and amplitude ratio of the precession projection in the two probe directions relative to the magnetic field orientation. This kind of magnetometer with high sensitivity in the range of the spatial angle is suitable for solving the inverse problem and geomagnetic navigation.

Enhancement of modulation depth of an all-optical switch using an azo dye-ethyl red film

The polymethyl methacrylate （PMMA） film doped with an azo dye ethyl-red （ER） film is employed to demonstrate the properties of an all-optical switch by its photoinduced dichroism and birefringence. We show how to enhance remarkably the modulation depth of all-optical switches almost to 100% by using two linear polarization beams： one beam is inclined at 45° with respect to the probing beam and serves as a pumping beam, and the other beam is perpendicular to the probing beam and used as an erasing beam. Furthermore, a maximum-to-minimum output intensity ratio of 2000：1 is achieved in experiment, which is very useful and important for optical storages and image displays.

Six-bit all-optical quantization using photonic crystal fiber with soliton self-frequency shift and pre-chirp spectral compression techniques

In this paper, we propose an optical quantization scheme for all-optical analog-to-digital conversion that facilitates photonics integration. A segment of 10-m photonic crystal fiber with a high nonlinear coefficient of 62.8 W-1/kin is utilized to realize large scale soliton self-frequency shift relevant to the power of the sampled optical signal. Furthermore, a 100-m dispersion-increasing fiber is used as the spectral compression module for further resolution enhancement. Simulation results show that 317-nm maximum wavelength shift is realized with 1550-nm initial wavelength and 6-bit quantization resolution is obtained with a subsequent spectral compression process.

Optimizational 6-bit all-optical quantization with soliton self-frequency shift and pre-chirp spectral compression techniques based on photonic crystal fiber

In this paper, we optimize a proposed all-optical quantization scheme based on soliton self-frequency shift(SSFS)and pre-chirp spectral compression techniques. A 10m-long high-nonlinear photonic crystal fiber(PCF) is used as an SSFS medium relevant to the power of the sampled optical pulses. Furthermore, a 10m-long dispersion flattened hybrid cladding hexagonal-octagonal PCF(6/8-PCF) is utilized as a spectral compression medium to further enhance the resolution. Simulation results show that 6-bit quantization resolution is still obtained when a 100m-long dispersion-increasing fiber(DIF)is replaced by a 6/8-PCF in spectral compression module.

All-optical switchings of 3-hydroxyflavone in different solvents

3-hydroxyflavone （3-HF） is an organic molecule with an excited-stated intramolecular proton transfer （ESIPT） effect. All-optical switchings and beam deflections of 3-HF in three kinds of solvents （cyclohexane, ethanol and dimethyl sulfoxide） have been investigated by using the third-harmonic generation （355 nm） of a mode-locked Nd：YAG laser as a pump beam and a continuous-wave （cw） He-Ne laser （632.8 nm） as a probe beam. The nonlinear refractive indices of 3-HF in the three different solvents are determined by using the Z-scan technique under an ultraviolet （UV） pump beam at a wavelength of 355 nm. It has been found that the optical switching and beam deflection effects result from the change in refractive index of 3-HF under the irradiation of the pump beam. On the basis of the analyses of absorption spectra and fluorescence spectra, we conclude that the change in refractive index of 3-HF is due to not the thermal effect but the ESIPT effect of 3-HF under the pump beam. As the ESIPT is exceedingly fast, 3-HF might be an excellent candidate for high-speed optical switching.

All-optical Quantitative Framework for Bioluminescence Tomography with Non-contact Measurement

In this contribution, we present an all-optical quantitative framework for bioluminescence tomography with non-contact measurement. The framework is comprised of four indispensable steps： extraction of the geometrical structures of the subject, light flux reconstruction on arbitrary surface, calibration and quantification of the surface light flux and internal bioluminescence reconstruction. In particular, the geometrical structures are retrieved using a completely optical method and captured under identical viewing conditions with the bioluminescent images. As a result, the proposed framework avoids the utilization of computed tomography or magnetic resonance imaging to provide the geometrical structures. On the basis of experimental measurements, we evaluate the performance of the proposed all-optical quantitative framework using a mouse shaped phantom. Preliminary result reveals the potential and feasibility of the proposed framework for bioluminescence tomography.

Strip silicon waveguide for code synchronization in all-optical analog-to-digital conversion based on a lumped time-delay compensation scheme

An all-optical analog-to-digital converter （ADC） based on the nonlinear effect in a silicon waveguide is a promising candidate for overcoming the limitation of electronic devices and is suitable for photonic integration. In this paper, a lumped time-delay compensation scheme with 2-bit quantization resolution is proposed. A strip silicon waveguide is designed and used to compensate for the entire time-delays of the optical pulses after a soliton self-frequency shift （SSFS） module within a wavelength range of 1550 nm-1580 nm. A dispersion coefficient as high as -19800 ps/（km.nm） with ＋0.5 ps/（km.nm） variation is predicted for the strip waveguide. The simulation results show that the maximum supportable sampling rate （MSSR） is 50.45 GSa/s with full width at half maximum （FWHM） variation less than 2.52 ps, along with the 2-bit effective- number-of-bit and Gray code output.

An all-optical time-delay relay based on a bacteriorhodopsin film

Using a special property of dynamic complementary-suppression-modulated transmission （DCSMT） in the bacteriorhodopsin （bR） film, we have demonstrated an all-optical time-delay relay. To extend our work, the relationship between the delay time of the all-optical time-delay relay and parameters of a bR film is numerically studied. We show how the delay time changes with the product of concentration and thickness （PCT） of a bR film. Furthermore, the shortest and longest delay times are given for the relay of ＇switch off. The saturable delay time and maximum delaytime of ＇switch on＇ are also given. How the wavelengths （632.8, 568, 533 and 412 nm） and intensities of the illuminating light influence the delay time is also discussed. The simulation results are useful for optimizing the design of all-optical time-delay relays.