In an industrial computer control system, if a communication with a single chip computer built with the aid of serial port I/O ports can be got easily to connect with equipment. Meanwhile, the system reliability would...In an industrial computer control system, if a communication with a single chip computer built with the aid of serial port I/O ports can be got easily to connect with equipment. Meanwhile, the system reliability would be improved and the system cost would be reduced.To save ±15 V power supply and electrical level convert circuit,the author provide a simple interface circuit and operational procedure between PC and the single chip computer in this paper. The application of multithread is introduced and the advantages of data acquisition and processing with multithread are also analyzed.展开更多
The paper proposes a novel transceiver in physical layer for high-speed serial data link based upon Universal Serial Bus (USB) 2.0, comprising transmitter and receiver. In the design, transmitter contains pre-and-main...The paper proposes a novel transceiver in physical layer for high-speed serial data link based upon Universal Serial Bus (USB) 2.0, comprising transmitter and receiver. In the design, transmitter contains pre-and-main driver to satisfy slew rate of output data, receiver includes optimized topology to improve preci- sion of received data. The circuit simulation is based on Cadence’s spectre software and Taiwan Semiconduc- tor Manufacture Corporation’s library of 0.25μm mixed-signal Complementary Metal-Oxide Semiconductor (CMOS) model. The front and post-simulation results reveal that the transceiver designed can transmit and re- ceive high-speed data in 480Mbps, which is in agreement with USB2.0 specification. The chip of physi- cal-layer transceiver has been designed and implemented with 0.25μm standard CMOS technology.展开更多
With the rapid development of integrated circuit(IC)technology,reusable intelligent property(IP)core design is widely valued by the industry.Based on the in-depth study of the functional characteristics of advanced mi...With the rapid development of integrated circuit(IC)technology,reusable intelligent property(IP)core design is widely valued by the industry.Based on the in-depth study of the functional characteristics of advanced microcontroller bus architecture(AMBA),a design scheme of IP core is presented,and it is divided into the functional modules,and the structural design of the IP core is completed.The relationship between the internal modules of the IP core is clarified,and the top-down design method is used to build the internal architecture of the IP core.The IP core interface module,register module,baud rate module,transmit module,receive module,and interrupt module are designed in detail by using Verilog language.The simulation results show that the designed IP core supports serial peripheral interface(SPI)protocol,the function coverage of IP core reaches 100%,the maximum working frequency reaches 200 MHz,and the resource occupancy rate is less than 15%.The reusable IP core can support multiple data formats,multiple timing transmission modes,and master/slave operation modes,reducing the resource consumption of hardware circuits and having stronger applicability.展开更多
Computer numerical control(CNC)system is the base of modern digital and intelligent manufacturing technolo- gy.And opened its architecture and constituted based on PC and Windows operating system(OS)is the main trend ...Computer numerical control(CNC)system is the base of modern digital and intelligent manufacturing technolo- gy.And opened its architecture and constituted based on PC and Windows operating system(OS)is the main trend of CNC sys- tem.However,even if the highest system priority is used in user mode,real-time capability of Windows(2000,NT,XP)for applications is not guaranteed.By using a device driver,which is running in kernel mode,the real time performance of Windows can be enhanced greatly.The acknowledgment performance of Windows to peripheral interrupts was evaluated.Harmonized with an intelligent real-time serial communication bus(RTSB),strict real-time performance can be achieved in Windows platform. An opened architecture software CNC system which is hardware independence is proposed based on PC and RTSB.A numerical control real time kernel(NCRTK),which is implemented as a device driver on Windows,is used to perform the NC tasks.Tasks are divided into real-time and non real-time.Real-time task is running in kernel mode and non real-time task is running in user mode.Data are exchanged between kernel and user mode by DMA and Windows Messages.展开更多
U SB( U niversal Serial Bus)经过了 9年发展 ,已经得到了市场的认可 ,其传输速度达到了最大 480 Mb/s的惊人地步 ,而 USB OTG ( On The Go)的推出更是鼓舞人心 ,其双重角色的强大功能可以使 U SB设备摆脱对 PC的完全依赖。 USB OTG是 ...U SB( U niversal Serial Bus)经过了 9年发展 ,已经得到了市场的认可 ,其传输速度达到了最大 480 Mb/s的惊人地步 ,而 USB OTG ( On The Go)的推出更是鼓舞人心 ,其双重角色的强大功能可以使 U SB设备摆脱对 PC的完全依赖。 USB OTG是 U SB 2 .0规范的补充 ,他使外设可以在无主机参与的情况下直接互连进行通信工程。本文简单介绍了 U SB OTG的工作原理 ,并分析了现在 U SB OTG的应用情况 ,重点针对数码相机伴侣存在的问题 。展开更多
This paper describes the specification and implement of a Universal Serial Bus （USB） dual-mode function IP core used for embedded system. Controlled by micro controller/CPU, the novel IP core can function as a USB h...This paper describes the specification and implement of a Universal Serial Bus （USB） dual-mode function IP core used for embedded system. Controlled by micro controller/CPU, the novel IP core can function as a USB host controller or USB peripheral controller. When configured as a USB host controller, it supports all USB 1.1 transaction types; supports automatic preamble insertion, and automatic SOF generation and transmission. Otherwise, when it is configured as a USB device by a microprocessor, it operates as a USB peripheral controller comvliant with USB2.0 svecification.展开更多
Linux has a special feature of automount in the Linux kernel. Filesystem can be mounted and unmounted automatically. Its performance is similar to MS Windows. It works well under demands of more saving resources and a...Linux has a special feature of automount in the Linux kernel. Filesystem can be mounted and unmounted automatically. Its performance is similar to MS Windows. It works well under demands of more saving resources and automatization, like memory of system. An approach to install/update software automatically on embedded platform was proposed. This approach derives from above feature based on embedded environment with Linux OS. Configurations of files related to this feature were introduced. An example in practice was given to realize this approach from universal serial bus (USB) memory disk when USB disk is available.展开更多
In this study,the multi-sensing system based on the tin oxide pH electrode for the ion-determination was presented. With the advantages of the real-time supervisory control apparatus,the measured values could be displ...In this study,the multi-sensing system based on the tin oxide pH electrode for the ion-determination was presented. With the advantages of the real-time supervisory control apparatus,the measured values could be displayed on the liquid crystal display (LCD) immediately.In this study,the basic sensor was the tin oxide pH electrode,which was fabricated by radio frequency (r.f.) sputtering system on the indium tin oxide (ITO)/glass substrate.Moreover,the major blocks of the system consist of the tin oxide electrode-based ion selective electrodes (ISEs),an analog front-ended readout circuit,a microcontroller with built-in analog to digital (A/D) converter.In addition,by the embedded system design,the measurement results can be transmitted to a portable system or computer through the Universal Serial Bus (USB) and Universal Asynchronous Receiver Transmitter (UART) interface immediately.According to the experimental results,the multi-sensing system has high performance and reliability for pH,K^+,and Na^+ detection.展开更多
Universal serial bus 2.0 (USB2.0) is a kind of mainstream interface technology. The traditional USB developing is only to develop USB peripheral devices. For the USB2.0 peripheral devices IP core system that has wide ...Universal serial bus 2.0 (USB2.0) is a kind of mainstream interface technology. The traditional USB developing is only to develop USB peripheral devices. For the USB2.0 peripheral devices IP core system that has wide application foreground, some interference inevitably exists in signal transmitting. Some fault-tolerant design and test methods must be adopted in order to correctly transmit and receive data. Combining with a project, this paper introduces in detail about measures, hardware implement, and test methods of fault-tolerant design about USB2.0 peripheral devices IP core system. Fault-tolerant design measures, noise reduction measures of signal processing, fault-tolerant methods about data encode and decode, package identification (ID) field fault-tolerant methods, and cyclic redundancy checks fault-tolerant methods are discussed. The paper also presents some hardware implement methods about fault-tolerant design of data decode and test methods about fault-tolerant design of USB2.0 IP core system. These methods can offer the reference for development of USB2.0 system in all kinds of electronics instrumentations.展开更多
文摘In an industrial computer control system, if a communication with a single chip computer built with the aid of serial port I/O ports can be got easily to connect with equipment. Meanwhile, the system reliability would be improved and the system cost would be reduced.To save ±15 V power supply and electrical level convert circuit,the author provide a simple interface circuit and operational procedure between PC and the single chip computer in this paper. The application of multithread is introduced and the advantages of data acquisition and processing with multithread are also analyzed.
文摘The paper proposes a novel transceiver in physical layer for high-speed serial data link based upon Universal Serial Bus (USB) 2.0, comprising transmitter and receiver. In the design, transmitter contains pre-and-main driver to satisfy slew rate of output data, receiver includes optimized topology to improve preci- sion of received data. The circuit simulation is based on Cadence’s spectre software and Taiwan Semiconduc- tor Manufacture Corporation’s library of 0.25μm mixed-signal Complementary Metal-Oxide Semiconductor (CMOS) model. The front and post-simulation results reveal that the transceiver designed can transmit and re- ceive high-speed data in 480Mbps, which is in agreement with USB2.0 specification. The chip of physi- cal-layer transceiver has been designed and implemented with 0.25μm standard CMOS technology.
文摘With the rapid development of integrated circuit(IC)technology,reusable intelligent property(IP)core design is widely valued by the industry.Based on the in-depth study of the functional characteristics of advanced microcontroller bus architecture(AMBA),a design scheme of IP core is presented,and it is divided into the functional modules,and the structural design of the IP core is completed.The relationship between the internal modules of the IP core is clarified,and the top-down design method is used to build the internal architecture of the IP core.The IP core interface module,register module,baud rate module,transmit module,receive module,and interrupt module are designed in detail by using Verilog language.The simulation results show that the designed IP core supports serial peripheral interface(SPI)protocol,the function coverage of IP core reaches 100%,the maximum working frequency reaches 200 MHz,and the resource occupancy rate is less than 15%.The reusable IP core can support multiple data formats,multiple timing transmission modes,and master/slave operation modes,reducing the resource consumption of hardware circuits and having stronger applicability.
基金Supported by the National Natural Science Foundation of China(No.50445004).
文摘Computer numerical control(CNC)system is the base of modern digital and intelligent manufacturing technolo- gy.And opened its architecture and constituted based on PC and Windows operating system(OS)is the main trend of CNC sys- tem.However,even if the highest system priority is used in user mode,real-time capability of Windows(2000,NT,XP)for applications is not guaranteed.By using a device driver,which is running in kernel mode,the real time performance of Windows can be enhanced greatly.The acknowledgment performance of Windows to peripheral interrupts was evaluated.Harmonized with an intelligent real-time serial communication bus(RTSB),strict real-time performance can be achieved in Windows platform. An opened architecture software CNC system which is hardware independence is proposed based on PC and RTSB.A numerical control real time kernel(NCRTK),which is implemented as a device driver on Windows,is used to perform the NC tasks.Tasks are divided into real-time and non real-time.Real-time task is running in kernel mode and non real-time task is running in user mode.Data are exchanged between kernel and user mode by DMA and Windows Messages.
文摘U SB( U niversal Serial Bus)经过了 9年发展 ,已经得到了市场的认可 ,其传输速度达到了最大 480 Mb/s的惊人地步 ,而 USB OTG ( On The Go)的推出更是鼓舞人心 ,其双重角色的强大功能可以使 U SB设备摆脱对 PC的完全依赖。 USB OTG是 U SB 2 .0规范的补充 ,他使外设可以在无主机参与的情况下直接互连进行通信工程。本文简单介绍了 U SB OTG的工作原理 ,并分析了现在 U SB OTG的应用情况 ,重点针对数码相机伴侣存在的问题 。
文摘This paper describes the specification and implement of a Universal Serial Bus （USB） dual-mode function IP core used for embedded system. Controlled by micro controller/CPU, the novel IP core can function as a USB host controller or USB peripheral controller. When configured as a USB host controller, it supports all USB 1.1 transaction types; supports automatic preamble insertion, and automatic SOF generation and transmission. Otherwise, when it is configured as a USB device by a microprocessor, it operates as a USB peripheral controller comvliant with USB2.0 svecification.
文摘Linux has a special feature of automount in the Linux kernel. Filesystem can be mounted and unmounted automatically. Its performance is similar to MS Windows. It works well under demands of more saving resources and automatization, like memory of system. An approach to install/update software automatically on embedded platform was proposed. This approach derives from above feature based on embedded environment with Linux OS. Configurations of files related to this feature were introduced. An example in practice was given to realize this approach from universal serial bus (USB) memory disk when USB disk is available.
文摘In this study,the multi-sensing system based on the tin oxide pH electrode for the ion-determination was presented. With the advantages of the real-time supervisory control apparatus,the measured values could be displayed on the liquid crystal display (LCD) immediately.In this study,the basic sensor was the tin oxide pH electrode,which was fabricated by radio frequency (r.f.) sputtering system on the indium tin oxide (ITO)/glass substrate.Moreover,the major blocks of the system consist of the tin oxide electrode-based ion selective electrodes (ISEs),an analog front-ended readout circuit,a microcontroller with built-in analog to digital (A/D) converter.In addition,by the embedded system design,the measurement results can be transmitted to a portable system or computer through the Universal Serial Bus (USB) and Universal Asynchronous Receiver Transmitter (UART) interface immediately.According to the experimental results,the multi-sensing system has high performance and reliability for pH,K^+,and Na^+ detection.
文摘Universal serial bus 2.0 (USB2.0) is a kind of mainstream interface technology. The traditional USB developing is only to develop USB peripheral devices. For the USB2.0 peripheral devices IP core system that has wide application foreground, some interference inevitably exists in signal transmitting. Some fault-tolerant design and test methods must be adopted in order to correctly transmit and receive data. Combining with a project, this paper introduces in detail about measures, hardware implement, and test methods of fault-tolerant design about USB2.0 peripheral devices IP core system. Fault-tolerant design measures, noise reduction measures of signal processing, fault-tolerant methods about data encode and decode, package identification (ID) field fault-tolerant methods, and cyclic redundancy checks fault-tolerant methods are discussed. The paper also presents some hardware implement methods about fault-tolerant design of data decode and test methods about fault-tolerant design of USB2.0 IP core system. These methods can offer the reference for development of USB2.0 system in all kinds of electronics instrumentations.
