The paper analyzes the characteristics and causes of formation of slotting allowances in China on the base of literature review on slotting allowances. The author believes that the government should take measures to m...The paper analyzes the characteristics and causes of formation of slotting allowances in China on the base of literature review on slotting allowances. The author believes that the government should take measures to make slotting allowances more reasonable and not to interfere necessary competition.展开更多
There is notable variability in carbon emission reduction efforts across different provinces in China,underscoring the need for effective strategies to implement carbon emission allowance auctions.These auctions,as op...There is notable variability in carbon emission reduction efforts across different provinces in China,underscoring the need for effective strategies to implement carbon emission allowance auctions.These auctions,as opposed to free allocations,could be more aligned with the principle of“polluter pays.”Focusing on three diverse regions—Ningxia,Beijing,and Zhejiang—this study employs a system dynamics simulation model to explore markets for carbon emissions and green certificates trading.The aim is to determine the optimal timing and appropriate policy intensities for auction introduction.Key findings include:(1)Optimal auction strategies differ among the provinces,recommending immediate implementation in Beijing,followed by Ningxia and Zhejiang.(2)In Ningxia,there’s a potential for a 6.20%increase in GDP alongside a 21.59%reduction in carbon emissions,suggesting a feasible harmony between environmental and economic objectives.(3)Market-related policy variables,such as total carbon allowances and Renewable Portfolio Standards,significantly influence the optimal auction strategies but have minimal effect on carbon auction prices.展开更多
The first modern Olympic Games took place in Athens in 1896.While in those early days of the Olympics only amateur and gentleman athletes were allowed to participate,today Olympic athletes are highly trained professio...The first modern Olympic Games took place in Athens in 1896.While in those early days of the Olympics only amateur and gentleman athletes were allowed to participate,today Olympic athletes are highly trained professionals often dedicating decades of preparation for the chance to compete in the Olympic Games.In sharp contrast to these highly trained athletes,the world’s population becomes less physically active on average,resulting in an obesity epidemic with associated metabolic syndrome and increased mortality through non-communicable diseases(e.g.,Collins et al.^(1)).展开更多
Motivated by recent realizations of spin-1 NaRb mixtures in the experiments[Phys.Rev.Lett.114,255301(2015);Phys.Rev.Lett.128,223201(2022)],we investigate heteronuclear magnetism in the Mott-insulating regime.Different...Motivated by recent realizations of spin-1 NaRb mixtures in the experiments[Phys.Rev.Lett.114,255301(2015);Phys.Rev.Lett.128,223201(2022)],we investigate heteronuclear magnetism in the Mott-insulating regime.Different from the identical mixtures where the boson statistics only admits even parity states from angular momentum composition,for heteronuclear atoms in principle all angular momentum states are allowed,which can give rise to new magnetic phases.While various magnetic phases can be developed over these degenerate spaces,the concrete symmetry breaking phases depend on not only the degree of degeneracy but also the competitions from many-body interactions.We unveil these rich phases using the bosonic dynamical mean-field theory approach.These phases are characterized by various orders,including spontaneous magnetization order,spin magnitude order,singlet pairing order,and nematic order,which may coexist specially in the regime with odd parity.Finally we address the possible parameter regimes for observing these spin-ordered Mott phases.展开更多
Introduction: The Six Sigma methodology is an opportunity for a better understanding of the performance of analytical methods and for a better adaptation of the quality control management policy of the medical biology...Introduction: The Six Sigma methodology is an opportunity for a better understanding of the performance of analytical methods and for a better adaptation of the quality control management policy of the medical biology laboratory. Using the sigma metric, this study assessed the performance of the Biochemistry analytical system of a medical biology laboratory in Côte d'Ivoire. Methods: Six Sigma methodology was applied to 3 analytes (alanine aminotransferase, glucose and creatinine). Performance indicators such as measurement imprecision and bias were determined based on the results of internal and external quality controls. The sigma number was calculated using the total allowable error values proposed by Ricos et al. Results: For both control levels, ALT had a sigma number greater than 6 (7.6 for normal control and 7.9 for pathological control). However, low sigma numbers, less than or equal to 2 for creatinine (1.4 for normal control and 2 for pathological control) and less than 1 for glucose were found. Conclusion: This study revealed good analytical performance of ALT from the point of view of 6 sigma analysis. However, modifications to the overall quality control procedure for glucose and creatinine are needed to improve their analytical performance. The study should be extended to the entire laboratory’s analytes in order to modify the strategies of quality control procedures based on metric analysis for an overall improvement in analytical performance.展开更多
Innovations in sequencing technology and the development of bioinformatics have allowed for studies of the genomics of many rice pests.At present,draft genomes of rice pests including Nilaparvata lugens,Sogatella furc...Innovations in sequencing technology and the development of bioinformatics have allowed for studies of the genomics of many rice pests.At present,draft genomes of rice pests including Nilaparvata lugens,Sogatella furcifera,Laodelphax striatellus,Sesamia inferens,Chilo suppressalis,Scirpophaga incertulas.展开更多
A simple extension of the standard model(SM) with a μ-flavored vector-like lepton(VLL) doublet and a real singlet scalar can have an interesting implication to the h→μ^(+)μ^(-)decay while offering the simplest pos...A simple extension of the standard model(SM) with a μ-flavored vector-like lepton(VLL) doublet and a real singlet scalar can have an interesting implication to the h→μ^(+)μ^(-)decay while offering the simplest possible explanation for the dark matter(DM) phenomenology.Assuming the real singlet scalar to be a viable DM candidate,it has been shown that the muon Yukawa coupling can have a negative contribution at the oneloop order if the 2^(nd) generation SM leptons are allowed to couple with the VLL doublet.The stringent direct detection bounds corresponding to a real singlet scalar DM can easily be relaxed if the SM quark sector was augmented with a dimension-6 operator at some new physics(NP) scale Λ_(NP).Thus,this model presents a significant phenomenological study where the muon Yukawa coupling can be corrected within a real singlet scalar DM framework.The considered parameter space can be tested/constrained through the high luminosity run of the LHC(HL-LHC) and future direct detection experiments.展开更多
In an experiment carried out at the Prague Asterix Laser System at laser intensities relevant to shock ignition conditions(I>10^(16) W/cm^(2)),the heating and transport of hot electrons were studied by using severa...In an experiment carried out at the Prague Asterix Laser System at laser intensities relevant to shock ignition conditions(I>10^(16) W/cm^(2)),the heating and transport of hot electrons were studied by using several complementary diagnostics,i.e.,K_(α)time-resolved imaging,hard x-ray filtering(a bremsstrahlung cannon),and electron spectroscopy.Ablators with differing composition from low Z(parylene N)to high Z(nickel)were used in multilayer planar targets to produce plasmas with different coronal temperature and collisionality and modify the conditions of hot-electron generation.The variety of available diagnostics allowed full characterization of the population of hot electrons,retrieving their conversion efficiency,time generation and duration,temperature,and angular divergence.The obtained results are shown to be consistent with those from detailed simulations and similar inertial confinement fusion experiments.Based on the measured data,the advantages,reliability,and complementarity of the experimental diagnostics are discussed.展开更多
Aero-engine fan blades of ten use a cavity structure to improve the thrust-to-weight ratio of the aircraft.However,the use of the cavity structure brings a series of difficulties to the manufacturing and processing of...Aero-engine fan blades of ten use a cavity structure to improve the thrust-to-weight ratio of the aircraft.However,the use of the cavity structure brings a series of difficulties to the manufacturing and processing of the blades.Due to the limitation of blade manufacturing technology,it is difficult for the internal cavity structure to achieve the designed contour shape,so the blade has uneven wall thickness and poor consistency,which affects the fatigue performance and airflow dynamic performance of the blade.In order to reduce the influence of uneven wall thickness,this paper proposes a grinding allowance extraction method considering the double dimension constraints(DDC)of the inner and outer contours of the hollow blade.Constrain the two dimensions of the inner and outer contours of the hollow blade.On the premise of satisfying the outer contour constraints,the machining model of the blade is modified according to the distribution of the inwall contour to obtain a more reasonable distribution of the grinding allowance.On the premise of satisfying the contour constraints,according to the distribution of the inwall contour,the machining model of the blade is modified to obtain a more reasonable distribution of the grinding allowance.Through the grinding experiment of the hollow blade,the surface roughness is below Ra0.4μm,and the contour accuracy is between-0.05~0.14 mm,which meets the processing requirements.Compared with the allowance extraction method that only considers the contour,the problem of poor wall thickness consistency can be effectively improved.It can be used to extract the allowance of aero-engine blades with hollow features,which lays a foundation for the study of hollow blade grinding methods with high service performance.展开更多
As the largest source of carbon emissions in China,the thermal power industry is the only emission-controlled industry in the first national carbon market compliance cycle.Its conversion to clean-energy generation tec...As the largest source of carbon emissions in China,the thermal power industry is the only emission-controlled industry in the first national carbon market compliance cycle.Its conversion to clean-energy generation technologies is also an important means of reducing CO_(2)emissions and achieving the carbon peak and carbon neutral commitments.This study used fractional Brownian motion to describe the energy-switching cost and constructed a stochastic optimization model on carbon allowance(CA)trading volume and emission-reduction strategy during compliance period with the Hurst exponent and volatility coefficient in the model estimated.We defined the optimal compliance cost of thermal power enterprises as the form of the unique solution of the Hamilton–Jacobi–Bellman equation by combining the dynamic optimization principle and the fractional It?’s formula.In this manner,we obtained the models for optimal emission reduction and equilibrium CA price.Our numerical analysis revealed that,within a compliance period of 2021–2030,the optimal reductions and desired equilibrium prices of CAs changed concurrently,with an increasing trend annually in different peak-year scenarios.Furthermore,sensitivity analysis revealed that the energy price indirectly affected the equilibrium CA price by influencing the Hurst exponent,the depreciation rate positively impacted the CA price,and increasing the initial CA reduced the optimal reduction and the CA price.Our findings can be used to develop optimal emission-reduction strategies for thermal power enterprises and carbon pricing in the carbon market.展开更多
The multiplication of heavy vehicle axles and road overloads are phenomena that are becoming increasingly important on the road network of the WAEMU community. These phenomena, although framed by standards, have an im...The multiplication of heavy vehicle axles and road overloads are phenomena that are becoming increasingly important on the road network of the WAEMU community. These phenomena, although framed by standards, have an impact on the durability of pavements. In this manuscript it is a question of evaluating the life of the road under the effect of traffic of these multi-axle vehicles and the different tolerances of overloads observed on the road network. To achieve this, a modeling of a bituminous pavement was made with the software ALIZE Lcpc Version 231 based on the principle of the French method of sizing. An inventory of multi-axle heavy goods vehicles was also made on a road with a weighing station. This traffic counting made it possible to classify heavy goods vehicles into three categories, namely: 1) trucks, 2) dual-wheeled semi-trailers and 3) single-wheeled semi-trailers. The results obtained show that in terms of aggressiveness, single-wheeled semi-trailers are the most aggressive, followed by heavy goods vehicles in the category of trucks with more than five axles and semi-trailers with dual wheels with more than seven axles. The durability of the road depends on the aggressiveness of heavy goods vehicles, it was found that the tolerance threshold for overloads of 15% of the total permissible rolling weight (TARW) or the total permissible laden weight (TALW) currently granted in the Community area needs to be reviewed. For durable road surfaces, this tolerance may only be allowed for heavy goods vehicles of type P11, P12 and P13. The 5% tolerance can be applied to all vehicles except heavy goods vehicles with single wheels.展开更多
EXCERPTS FROM MAJOR CHINESE MAGAZINES THE WANDERING POET Sanlian Lifeweek 2 October The immense box office success of Chang’An,a Chinese animated film released this summer,has allowed many people to rediscover Li Bai...EXCERPTS FROM MAJOR CHINESE MAGAZINES THE WANDERING POET Sanlian Lifeweek 2 October The immense box office success of Chang’An,a Chinese animated film released this summer,has allowed many people to rediscover Li Bai,a Tang Dynasty(618-907)poet who rivals his contemporary Du Fu for the title of China’s greatest poet of all time.A romantic in his view of life and also in his verse,Li is much loved for both his wildly imaginative poems and his carefree lifestyle.The poet was always on the move.展开更多
Directions：For this part,you are allowed 30 minutes to write a short essay about a campus activity that has benefited you most.You should state the reasons and write at least120 but no more than 180 words.这道作文题...Directions：For this part,you are allowed 30 minutes to write a short essay about a campus activity that has benefited you most.You should state the reasons and write at least120 but no more than 180 words.这道作文题目看似不难,但笔者在阅卷中却发现有将近一半的考生写偏题或跑题。先让我们一起仔细审审题：a campus activity that has benefited you most。展开更多
The shape of body and the ease of garment are the important elements in constructing garment style. However, the distribution of ease in garment is uneven and the curves showing different cross-sections of garment sty...The shape of body and the ease of garment are the important elements in constructing garment style. However, the distribution of ease in garment is uneven and the curves showing different cross-sections of garment style with ease are unavailable in the literature. This information is crucial when the three-dimensional garment style is transformed into two-dimensional garment patterns. Thus, several different X-line style garments are produced by 3D draping technology, and the cubic spline is used to fit the cross sectional curves of BL, WL of body and garment. By comparing cross sections of body and garment, the ease at different location can be derived. Besides, garments in 10 different dimensions and quantities of style ease are included in the current study. By numerical operation on discrete ease data at different location, the fitted functions of ease distribution are obtained.展开更多
文摘The paper analyzes the characteristics and causes of formation of slotting allowances in China on the base of literature review on slotting allowances. The author believes that the government should take measures to make slotting allowances more reasonable and not to interfere necessary competition.
基金supported by the National Social Science Foundation of China(Grant No.22FGLB029)the National Nature Science Foundation of China(Grant Nos.72274094,72371129,71834003)+1 种基金Project of the Ministry of Education of China(Grant No.202200337)the Fundamental Research Funds for the Central Universities(Grant Nos.NR2021002 and NS2022074).
文摘There is notable variability in carbon emission reduction efforts across different provinces in China,underscoring the need for effective strategies to implement carbon emission allowance auctions.These auctions,as opposed to free allocations,could be more aligned with the principle of“polluter pays.”Focusing on three diverse regions—Ningxia,Beijing,and Zhejiang—this study employs a system dynamics simulation model to explore markets for carbon emissions and green certificates trading.The aim is to determine the optimal timing and appropriate policy intensities for auction introduction.Key findings include:(1)Optimal auction strategies differ among the provinces,recommending immediate implementation in Beijing,followed by Ningxia and Zhejiang.(2)In Ningxia,there’s a potential for a 6.20%increase in GDP alongside a 21.59%reduction in carbon emissions,suggesting a feasible harmony between environmental and economic objectives.(3)Market-related policy variables,such as total carbon allowances and Renewable Portfolio Standards,significantly influence the optimal auction strategies but have minimal effect on carbon auction prices.
文摘The first modern Olympic Games took place in Athens in 1896.While in those early days of the Olympics only amateur and gentleman athletes were allowed to participate,today Olympic athletes are highly trained professionals often dedicating decades of preparation for the chance to compete in the Olympic Games.In sharp contrast to these highly trained athletes,the world’s population becomes less physically active on average,resulting in an obesity epidemic with associated metabolic syndrome and increased mortality through non-communicable diseases(e.g.,Collins et al.^(1)).
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB0500000)the Innovation Program for Quantum Science and Technology(Grant No.2021ZD0301200)+1 种基金the National Natural Science Foundation of China(Grant Nos.12074431,12274384,and 12374252)the Excellent Youth Foundation of Hunan Scientific Committee(Grant No.2021JJ10044).
文摘Motivated by recent realizations of spin-1 NaRb mixtures in the experiments[Phys.Rev.Lett.114,255301(2015);Phys.Rev.Lett.128,223201(2022)],we investigate heteronuclear magnetism in the Mott-insulating regime.Different from the identical mixtures where the boson statistics only admits even parity states from angular momentum composition,for heteronuclear atoms in principle all angular momentum states are allowed,which can give rise to new magnetic phases.While various magnetic phases can be developed over these degenerate spaces,the concrete symmetry breaking phases depend on not only the degree of degeneracy but also the competitions from many-body interactions.We unveil these rich phases using the bosonic dynamical mean-field theory approach.These phases are characterized by various orders,including spontaneous magnetization order,spin magnitude order,singlet pairing order,and nematic order,which may coexist specially in the regime with odd parity.Finally we address the possible parameter regimes for observing these spin-ordered Mott phases.
文摘Introduction: The Six Sigma methodology is an opportunity for a better understanding of the performance of analytical methods and for a better adaptation of the quality control management policy of the medical biology laboratory. Using the sigma metric, this study assessed the performance of the Biochemistry analytical system of a medical biology laboratory in Côte d'Ivoire. Methods: Six Sigma methodology was applied to 3 analytes (alanine aminotransferase, glucose and creatinine). Performance indicators such as measurement imprecision and bias were determined based on the results of internal and external quality controls. The sigma number was calculated using the total allowable error values proposed by Ricos et al. Results: For both control levels, ALT had a sigma number greater than 6 (7.6 for normal control and 7.9 for pathological control). However, low sigma numbers, less than or equal to 2 for creatinine (1.4 for normal control and 2 for pathological control) and less than 1 for glucose were found. Conclusion: This study revealed good analytical performance of ALT from the point of view of 6 sigma analysis. However, modifications to the overall quality control procedure for glucose and creatinine are needed to improve their analytical performance. The study should be extended to the entire laboratory’s analytes in order to modify the strategies of quality control procedures based on metric analysis for an overall improvement in analytical performance.
基金supported by the Zhejiang Provincial Key Research and Development Plan, China(Grant Nos.2020C02001 and 2022C02034)the National Natural Science Foundation of China(Grant No.31672022)。
文摘Innovations in sequencing technology and the development of bioinformatics have allowed for studies of the genomics of many rice pests.At present,draft genomes of rice pests including Nilaparvata lugens,Sogatella furcifera,Laodelphax striatellus,Sesamia inferens,Chilo suppressalis,Scirpophaga incertulas.
文摘A simple extension of the standard model(SM) with a μ-flavored vector-like lepton(VLL) doublet and a real singlet scalar can have an interesting implication to the h→μ^(+)μ^(-)decay while offering the simplest possible explanation for the dark matter(DM) phenomenology.Assuming the real singlet scalar to be a viable DM candidate,it has been shown that the muon Yukawa coupling can have a negative contribution at the oneloop order if the 2^(nd) generation SM leptons are allowed to couple with the VLL doublet.The stringent direct detection bounds corresponding to a real singlet scalar DM can easily be relaxed if the SM quark sector was augmented with a dimension-6 operator at some new physics(NP) scale Λ_(NP).Thus,this model presents a significant phenomenological study where the muon Yukawa coupling can be corrected within a real singlet scalar DM framework.The considered parameter space can be tested/constrained through the high luminosity run of the LHC(HL-LHC) and future direct detection experiments.
基金This work was carried out within the framework of the EUROfusion Consortium,funded by the European Union via the Euratom Research and Training Programme(Grant No.101052200-EUROfusion)Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Commission.Neither the European Union nor the European Commission can be held responsible for them.The involved teams have operated within the framework of the Enabling Research Project:Grant No.ENR-IFE.01.CEA“Advancing shock ignition for direct-drive inertial fusion.”The work was also supported by the Natural Sciences and Engineering Research Council of Canada(Grant No.RGPIN-2019-05013)+5 种基金The authors acknowledge support of the PALS Infrastructure within the MŠMT(MEYS)project Grant No.LM2023068Staff members of the PALS Research Center appreciate financial support(Grant No.LM2023068)from the Czech Ministry of Education,Youth and Sports facilitating operation of the PALS facilityThe work of JIHT RAS team was supported by the Ministry of Science and Higher Education of the Russian Federation(State Assignment No.075-01129-23-00)The work at NRMU MEPhI was supported by the Ministry of Science and Higher Education of the Russian Federation(Agreement No.075-15-2021-1361)This project has received funding from the CNR funded Italian research Network ELI-Italy(D.M.No.63108.08.2016)This work was funded by United Kingdom EPSRC Grants No.EP/P026796/1 and No.EP/L01663X/1.The results presented in this paper are based on work carried out between September 2018 and December 2021.
文摘In an experiment carried out at the Prague Asterix Laser System at laser intensities relevant to shock ignition conditions(I>10^(16) W/cm^(2)),the heating and transport of hot electrons were studied by using several complementary diagnostics,i.e.,K_(α)time-resolved imaging,hard x-ray filtering(a bremsstrahlung cannon),and electron spectroscopy.Ablators with differing composition from low Z(parylene N)to high Z(nickel)were used in multilayer planar targets to produce plasmas with different coronal temperature and collisionality and modify the conditions of hot-electron generation.The variety of available diagnostics allowed full characterization of the population of hot electrons,retrieving their conversion efficiency,time generation and duration,temperature,and angular divergence.The obtained results are shown to be consistent with those from detailed simulations and similar inertial confinement fusion experiments.Based on the measured data,the advantages,reliability,and complementarity of the experimental diagnostics are discussed.
基金Supported by National Natural Science Foundation of China(Grant No.U1908232)National Science and Technology Major Project(Grant No.2017-VII-0002-0095).
文摘Aero-engine fan blades of ten use a cavity structure to improve the thrust-to-weight ratio of the aircraft.However,the use of the cavity structure brings a series of difficulties to the manufacturing and processing of the blades.Due to the limitation of blade manufacturing technology,it is difficult for the internal cavity structure to achieve the designed contour shape,so the blade has uneven wall thickness and poor consistency,which affects the fatigue performance and airflow dynamic performance of the blade.In order to reduce the influence of uneven wall thickness,this paper proposes a grinding allowance extraction method considering the double dimension constraints(DDC)of the inner and outer contours of the hollow blade.Constrain the two dimensions of the inner and outer contours of the hollow blade.On the premise of satisfying the outer contour constraints,the machining model of the blade is modified according to the distribution of the inwall contour to obtain a more reasonable distribution of the grinding allowance.On the premise of satisfying the contour constraints,according to the distribution of the inwall contour,the machining model of the blade is modified to obtain a more reasonable distribution of the grinding allowance.Through the grinding experiment of the hollow blade,the surface roughness is below Ra0.4μm,and the contour accuracy is between-0.05~0.14 mm,which meets the processing requirements.Compared with the allowance extraction method that only considers the contour,the problem of poor wall thickness consistency can be effectively improved.It can be used to extract the allowance of aero-engine blades with hollow features,which lays a foundation for the study of hollow blade grinding methods with high service performance.
基金like to thank Major Program of National Philosophy and Social Science Foundation of China(Grant No.21ZDA086)National Natural Science Foundation of China(Grant No.71974188),and Jiangsu Soft Science Fund(Grant No.BR2022007).
文摘As the largest source of carbon emissions in China,the thermal power industry is the only emission-controlled industry in the first national carbon market compliance cycle.Its conversion to clean-energy generation technologies is also an important means of reducing CO_(2)emissions and achieving the carbon peak and carbon neutral commitments.This study used fractional Brownian motion to describe the energy-switching cost and constructed a stochastic optimization model on carbon allowance(CA)trading volume and emission-reduction strategy during compliance period with the Hurst exponent and volatility coefficient in the model estimated.We defined the optimal compliance cost of thermal power enterprises as the form of the unique solution of the Hamilton–Jacobi–Bellman equation by combining the dynamic optimization principle and the fractional It?’s formula.In this manner,we obtained the models for optimal emission reduction and equilibrium CA price.Our numerical analysis revealed that,within a compliance period of 2021–2030,the optimal reductions and desired equilibrium prices of CAs changed concurrently,with an increasing trend annually in different peak-year scenarios.Furthermore,sensitivity analysis revealed that the energy price indirectly affected the equilibrium CA price by influencing the Hurst exponent,the depreciation rate positively impacted the CA price,and increasing the initial CA reduced the optimal reduction and the CA price.Our findings can be used to develop optimal emission-reduction strategies for thermal power enterprises and carbon pricing in the carbon market.
文摘The multiplication of heavy vehicle axles and road overloads are phenomena that are becoming increasingly important on the road network of the WAEMU community. These phenomena, although framed by standards, have an impact on the durability of pavements. In this manuscript it is a question of evaluating the life of the road under the effect of traffic of these multi-axle vehicles and the different tolerances of overloads observed on the road network. To achieve this, a modeling of a bituminous pavement was made with the software ALIZE Lcpc Version 231 based on the principle of the French method of sizing. An inventory of multi-axle heavy goods vehicles was also made on a road with a weighing station. This traffic counting made it possible to classify heavy goods vehicles into three categories, namely: 1) trucks, 2) dual-wheeled semi-trailers and 3) single-wheeled semi-trailers. The results obtained show that in terms of aggressiveness, single-wheeled semi-trailers are the most aggressive, followed by heavy goods vehicles in the category of trucks with more than five axles and semi-trailers with dual wheels with more than seven axles. The durability of the road depends on the aggressiveness of heavy goods vehicles, it was found that the tolerance threshold for overloads of 15% of the total permissible rolling weight (TARW) or the total permissible laden weight (TALW) currently granted in the Community area needs to be reviewed. For durable road surfaces, this tolerance may only be allowed for heavy goods vehicles of type P11, P12 and P13. The 5% tolerance can be applied to all vehicles except heavy goods vehicles with single wheels.
文摘EXCERPTS FROM MAJOR CHINESE MAGAZINES THE WANDERING POET Sanlian Lifeweek 2 October The immense box office success of Chang’An,a Chinese animated film released this summer,has allowed many people to rediscover Li Bai,a Tang Dynasty(618-907)poet who rivals his contemporary Du Fu for the title of China’s greatest poet of all time.A romantic in his view of life and also in his verse,Li is much loved for both his wildly imaginative poems and his carefree lifestyle.The poet was always on the move.
文摘Directions：For this part,you are allowed 30 minutes to write a short essay about a campus activity that has benefited you most.You should state the reasons and write at least120 but no more than 180 words.这道作文题目看似不难,但笔者在阅卷中却发现有将近一半的考生写偏题或跑题。先让我们一起仔细审审题：a campus activity that has benefited you most。
文摘The shape of body and the ease of garment are the important elements in constructing garment style. However, the distribution of ease in garment is uneven and the curves showing different cross-sections of garment style with ease are unavailable in the literature. This information is crucial when the three-dimensional garment style is transformed into two-dimensional garment patterns. Thus, several different X-line style garments are produced by 3D draping technology, and the cubic spline is used to fit the cross sectional curves of BL, WL of body and garment. By comparing cross sections of body and garment, the ease at different location can be derived. Besides, garments in 10 different dimensions and quantities of style ease are included in the current study. By numerical operation on discrete ease data at different location, the fitted functions of ease distribution are obtained.
