Mordenite with different Si/Al ratios were synthesized by solvent-free method and used for dimethyl ether(DME)carbonylation reaction.The influence of Si/Al ratio in the feedstock on the structure,porosity and acid sit...Mordenite with different Si/Al ratios were synthesized by solvent-free method and used for dimethyl ether(DME)carbonylation reaction.The influence of Si/Al ratio in the feedstock on the structure,porosity and acid sites were systematically investigated.The characterization results showed that with the increase of Si/Al ratio in the feedstock,part of silicon species fail to enter the skeleton and the specific surface area and pore volume of the samples decreased.The amount of weak acid and medium strong acid decreased alongside with the increasing Si/Al ratio,and the amount of strong acid slightly increased.The Al atoms preferentially enter the strong acid sites in the 8 member ring(MR)channel during the crystallization process.The high Si/Al ratio sample had more acid sites located in the 8 MR channel,leading to more active sites for carbonylation reaction and higher catalytic performance.Appropriately increasing the Si/Al ratio was beneficial for the improvement of carbonylation reaction activity over the mordenite(MOR)catalyst.展开更多
In the domain of perovskite solar cells(PSCs),the imperative to reconcile impressive photovoltaic performance with lead-related issue and environmental stability has driven innovative solutions.This study pioneers an ...In the domain of perovskite solar cells(PSCs),the imperative to reconcile impressive photovoltaic performance with lead-related issue and environmental stability has driven innovative solutions.This study pioneers an approach that not only rectifies lead leakage but also places paramount importance on the attainment of rigorous interfacial passivation.Crown ethers,notably benzo-18-crown-6-ether(B18C6),were strategically integrated at the perovskite-hole transport material interface.Crown ethers exhibit a dual role:efficiently sequestering and immobilizing Pb^(2+)ions through host-guest complexation and simultaneously establishing a robust interfacial passivation layer.Selected crown ether candidates,guided by density functional theory(DFT)calculations,demonstrated proficiency in binding Pb2+ions and optimizing interfacial energetics.Photovoltaic devices incorporating these materials achieved exceptional power conversion efficiency(PCE),notably 21.7%for B18C6,underscoring their efficacy in lead binding and interfacial passivation.Analytical techniques,including time-of-flight secondary ion mass spectrometry(ToF-SIMS),ultraviolet photoelectron spectroscopy(UPS),time-resolved photoluminescence(TRPL),and transient absorption spectroscopy(TAS),unequivocally affirmed Pb^(2+)ion capture and suppression of non-radiative recombination.Notably,these PSCs maintained efficiency even after enduring 300 h of exposure to 85%relative humidity.This research underscores the transformative potential of crown ethers,simultaneously addressing lead binding and stringent interfacial passivation for sustainable PSCs poised to commercialize and advance renewable energy applications.展开更多
[Objectives]To establish a thin-layer chromatography(TLC)method for the determination of rubiadin-1-methyl ether in Yao Medicine Chuanlianzhu(Damnacanthus giganteus).[Methods]A silica gel G thin-layer plate was adopte...[Objectives]To establish a thin-layer chromatography(TLC)method for the determination of rubiadin-1-methyl ether in Yao Medicine Chuanlianzhu(Damnacanthus giganteus).[Methods]A silica gel G thin-layer plate was adopted for TLC.Petroleum ether(60-90℃)-chloroform-methanol-water(7:15:3:1)was used as the developing solvent and inspected under ultraviolet lamp(365 nm).The content was determined by Inertsil ODS-3 C 18 column(4.60 mm×250 mm,5μm),mobile phase:acetonitrile-0.2%phosphoric acid gradient elution,detection wavelength 277 nm,flow rate 1.0 mL/min,column temperature 30℃,injection volume 10μL.[Results]The spots of 10 Chuanlianzhu samples from different origins showed the same color at the same position as the control,and the spots were clear and specific.The injection volume of rubiadin-1-methyl ether showed a good linear relationship in the range of 2.90-145μg(R=0.9996).The average recovery rate of rubiadin-1-methyl ether in the low,medium and high dose groups of Yao Medicine Chuanlianzhu was 98.72%,and RSD=1.78%.[Conclusions]This method can effectively identify Yao Medicine Chuanlianzhu medicinal materials and accurately determine the content of rubiadin-1-methyl ether in the medicinal materials.It provides a scientific basis for the development and utilization of Yao Medicine Chuanlianzhu medicinal resources.展开更多
This wok proposed the extraction distillation coupled pervaporation(ED+PV) technology process using two different solvents to separate isopropanol(IPA) and diisopropyl ether(DIPE) from DIPE/IPA/H_(2)O ternary heteroge...This wok proposed the extraction distillation coupled pervaporation(ED+PV) technology process using two different solvents to separate isopropanol(IPA) and diisopropyl ether(DIPE) from DIPE/IPA/H_(2)O ternary heterogeneous azeotropes in industrial wastewater from the synthesis of isopropanol in this study.Based on strict design specifications, simulation and sequential iteration methods are used for process design and optimization. Compared to the ethylene glycol(EG)-EG+H_(2)O process and the 1,3-propanediol(PDO)-IPA+H_(2)O process, the total annual cost(TAC) of the EG-IPA+H_(2)O process decreased by 20.76% and 7.86%(PDO). Compared to the EG-EG+H_(2)O process, the TAC of the PDO-IPA+H_(2)O process reduced 14%, but the global warming potential(GWP) and human toxicity of the PDO-IPA+H_(2)O process increased 11.3% and 4.07% respectively. Compared to the PDO-IPA+H_(2)O process, the EG-IPA+H_(2)O process saves 7.86%(TAC), 9.78%(GWP) and 9.85%(human toxicity). The ED+PV process with EG is superior to PDO in factors of TAC, energy consumption, human toxicity and environment. The EG-IPA+H_(2)O process changed the separation order of the products of the multi-azeotropic system, reduced the cost and energy conservation of the system, and enhanced the environmental protection evaluation of the process, is the best process through life cycle assessment for analyzing the economy, energy conservation, environmental assessment and human toxicity, designing cleaner products, controlling waste discharge, and promoting the chemical purification industry. This work provides a new process design and optimized separation ideas, will have a good guiding significance for the research and application separation of multi-azeotropic mixture with mixed solvents in organic wastewater from the cleaner chemical production, has been up to standard wastewater discharge process, and realized the development goal of carbon peak and carbon neutrality in the sustainable development of chemical clean industry.展开更多
The iodine value (iodine number) and hydroxyl value are important analytical characteristics of fats and oils. The iodine (I<sub>2</sub>) required saturating the fatty acids present in 100 grams of the oil...The iodine value (iodine number) and hydroxyl value are important analytical characteristics of fats and oils. The iodine (I<sub>2</sub>) required saturating the fatty acids present in 100 grams of the oil or fat. Iodine value is a measure of the total number of double bonds (-C=C-) present in fats and oils. Unsaturated compounds contain molecules with double and triple bonds which are very reactive towards iodine. The iodine value has been determined according to Hanus with iodine monobromide in glacial acetic acid, and then the amount of iodine remaining unreacted is determined by titration using sodium thiosulfate volumetric standard solution. The hydroxyl value is the amount of potassium hydroxide in milligrams that is equivalent to the hydroxyl amount of 1 gram of the sample (mg KOH/g sample). Poloxyl Stearyl Ether is a mixture of the monostearyl ethers of mixed polyethylene glycols. It may contain various amounts of free stearyl alcohol and some free polyethylene glycol. In this study, the iodine value and hydroxyl value have been determined by titration in polyoxyl stearyl ether. Iodine value 1.84 g of I<sub>2</sub> absorbed/100g sample, and hydroxyl value 162.65 mg KOH/g sample have been found in poloxyl stearyl ether. The iodine value and hydroxyl value results met the United States Pharmacopeia specifications for Polyoxyl Stearyl Ether.展开更多
In this work,the oxidation of a mixture of dimethyl ether(DME) and methyl formate(MF) was studied in both an aqueous electrochemical cell and a vapor-fed polymer electrolyte membrane fuel cell(PEMFC)utilizing a multi-...In this work,the oxidation of a mixture of dimethyl ether(DME) and methyl formate(MF) was studied in both an aqueous electrochemical cell and a vapor-fed polymer electrolyte membrane fuel cell(PEMFC)utilizing a multi-metallic alloy catalyst,Pt_(3)Pd_(3)Sn_(2)/C,discovered earlier by us.The current obtained during the bulk oxidation of a DME-saturated 1 M MF was higher than the summation of the currents provided by the two fuels separately,suggesting the cooperative effect of mixing these fuels.A significant increase in the anodic charge was realized during oxidative stripping of a pre-adsorbed DME+MF mixture as compared to DME or MF individually.This is ascribed to greater utilization of specific catalytic sites on account of the relatively lower adsorption energy of the dual-molecules than of the sum of the individual molecules as confirmed by the density fu nctional theory(DFT) calculations.Fuel cell polarization was also conducted using a Pt_(3)Pd_(3)Sn_(2)/C(anode) and Pt/C(cathode) catalysts-coated membrane(CCM).The enhanced surface coverage and active site utilization resulted in providing a higher peak power density by the DME+MF mixture-fed fuel cell(123 mW cm^(-2)at 0.45 V) than with DME(84mW cm^(-2)at 0.35 V) or MF(28 mW cm^(-2)at 0.2 V) at the same total anode hydrocarbon flow rate,temperature,and ambient pressure.展开更多
1. Introduction The Lithium-sulfur battery(LSB) shows promise as a highdensity energy source, with a theoretical energy density of approximately 2600 W h kg^(-1)[1]. However, practical application of the LSB has been ...1. Introduction The Lithium-sulfur battery(LSB) shows promise as a highdensity energy source, with a theoretical energy density of approximately 2600 W h kg^(-1)[1]. However, practical application of the LSB has been hindered by the “shuttle effect” and Li anode corrosion [2,3]. Highly concentrated electrolytes(HCEs) have been proposed as a solution, as they can inhibit the dissolution of lithium polysulfide and promote homogeneous lithium deposition [4].展开更多
Electrosynthesis of ammonia from the reduction of nitrogen is still confronted with the limited supply of gas reactant in dynamics as well as high activation barrier in thermodynamics.Unfortunately,despite tremendous ...Electrosynthesis of ammonia from the reduction of nitrogen is still confronted with the limited supply of gas reactant in dynamics as well as high activation barrier in thermodynamics.Unfortunately,despite tremendous efforts devoted to electrocatalysts themselves,they still fail to tackle the above two challenges simultaneously.Herein,we employ a heterogeneous catalyst adlayer-composed of crown ethers associated with Li^(+)ions-to achieve the dual promotion of dynamics and thermodynamics for ambient ammonia synthesis.Dynamically,the bound Li^(+)ions interact with the strong quadrupole moment of nitrogen,and trigger considerable reactant flux toward the catalyst.Thermodynamically,Li^(+)associated with the oxygen of crown ether achieves a higher density of states at the Fermi level for the catalyst,enabling effortless electron transfer from the catalysts to nitrogen and thus greatly reducing the activation barrier.As expected,the proof-of-concept system achieves an ammonia yield rate of 168.5μg h^(-1)mg^(-1)and a Faradaic efficiency of 75.3%at-0.3 V vs.RHE.This system-level approach opens up pathways for tackling the two key challenges that have limited the field of ammonia synthesis.展开更多
Ethers are promising electrolyte solvents for secondary Li metal batteries because of their excellent reduction stability.However,their oxidation stability has been mostly relying on the high concentration approach,an...Ethers are promising electrolyte solvents for secondary Li metal batteries because of their excellent reduction stability.However,their oxidation stability has been mostly relying on the high concentration approach,and limited progress has been made on building effective interphase to protect the cathode from the corrosion of the electrolyte.In this work,we construct a semi-crystalline interfacial layer on the surface of Li(Ni_(0.8)Co_(0.1)Mn_(0.1))O_(2)cathode that can achieve improved electrochemical stability in the highly corrosive chemical environment formed by the decomposition of ether molecules.Different from traditional brittle crystalline interphases,the optimized semi-crystalline layer with low modulus and high ionic conductivity can effectively relieve electrode strain and maintain the integrity of the interface layer.Due to this design,the continuous oxidation decomposition of ether-based electrolytes could be significantly suppressed and the battery shows outstanding cycling stability(84%capacity retention after 300 cycles).This article provides a solution to address the oxidation instability issue of ether-based electrolytes.展开更多
Catalytic hydrogenolysis of aromatic ether bonds is a highly promising strategy for upgrading lignin into small-molecule chemicals,which relies on developing innovative heterogeneous catalysts with high activity.Herei...Catalytic hydrogenolysis of aromatic ether bonds is a highly promising strategy for upgrading lignin into small-molecule chemicals,which relies on developing innovative heterogeneous catalysts with high activity.Herein,we designed porous zirconium phosphate nanosheet-supported Ru nanocatalysts(Ru/ZrPsheet)as the heterogeneous catalyst by a process combining ball milling and molten-salt(KNO_(3)).Very interestingly,the fabricated Ru/ZrPsheetshowed good catalytic performance on the transfer hydrogenolysis of various types of aromatic ether bonds contained in lignin,i.e.,4-O-5,a-O-4,β-O-4,and aryl-O-CH3,over a low Ru usage(<0.5 mol%)without using any acidic/basic additive.Detailed investigations indicated that the properties of Ru and the support were indispensable.The excellent activity of Ru/ZZrPsheetoriginated from the strong acidity and basicity of ZrPsheetand the higher electron density of metallic Ru0as well as the nanosheet structure of ZrPsheet.展开更多
Polybrominated diphenyl ethers(PBDEs)are a kind of serious pollutants in the ocean.Biodegradation is considered as an economical and safe way for PBDEs removal and reductive debromination dominates the initial pathway...Polybrominated diphenyl ethers(PBDEs)are a kind of serious pollutants in the ocean.Biodegradation is considered as an economical and safe way for PBDEs removal and reductive debromination dominates the initial pathway of anaerobic degradation.On the basis of experimental study,Octa-BDE 197,Hepta-BDE 183,Hexa-BDE 153,Penta-BDE 99 and Tetra-BDE 47 were selected as the initial degradation objects,and their debromination degradation were studied using density functional theory.The structures were optimized by Gaussian 09 program.Furthermore,the molecular orbitals and charge distribution were analyzed.All C-Br bond dissociation energies at different positions including ortho,meta and para bromine atoms were calculated and the sequence of debromination was obtained.There is a close relationship between molecular structure,charge,molecular orbital and C-Br bond.All PBDEs exhibited similar debromination pathways with preferential removal of meta and para bromines.展开更多
A new electrophilic polymer, 2,4-dinitrophenyl ether of polyvinyl alcohol (PVA-DNP), having a degree of substitution of 0.5 was prepared from polyvinyl alcohol (PVA) and 1-fluro-2,4-dinitrobenzene (DNFB). The PVA-DNP ...A new electrophilic polymer, 2,4-dinitrophenyl ether of polyvinyl alcohol (PVA-DNP), having a degree of substitution of 0.5 was prepared from polyvinyl alcohol (PVA) and 1-fluro-2,4-dinitrobenzene (DNFB). The PVA-DNP polymer was characterized by NMR, IR, and UV-visible spectroscopy. The reaction of PVA-DNP with sodium methoxide was followed by NMR and UV-visible spectroscopy. Evidence of polymer bound spirocyclic SIGMA complex, C-1 and C-3 polymer bound DNP-methoxy SIGMA complexes and the formation and C-1 methoxy complex of 2,4-dinitroanisole was observed.展开更多
A new concentrated ternary salt ether-based electrolyte enables stable cycling of lithium metal battery(LMB)cells with high-mass-loading(13.8 mg cm^(−2),2.5 mAh cm^(−2))NMC622(LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2))cathodes ...A new concentrated ternary salt ether-based electrolyte enables stable cycling of lithium metal battery(LMB)cells with high-mass-loading(13.8 mg cm^(−2),2.5 mAh cm^(−2))NMC622(LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2))cathodes and 50μm Li anodes.Termed“CETHER-3,”this electrolyte is based on LiTFSI,LiDFOB,and LiBF4 with 5 vol%fluorinated ethylene carbonate in 1,2-dimethoxyethane.Commer-cial carbonate and state-of-the-art binary salt ether electrolytes were also tested as baselines.With CETHER-3,the electrochemical performance of the full-cell battery is among the most favorably reported in terms of high-voltage cycling stability.For example,LiNi_(x)Mn_(y)Co_(1-x-y)O_(2)(NMC)-Li metal cells retain 80%capacity at 430 cycles with a 4.4 V cut-off and 83%capacity at 100 cycles with a 4.5 V cut-off(charge at C/5,discharge at C/2).According to simulation by density functional theory and molecular dynamics,this favorable performance is an outcome of enhanced coordination between Li^(+)and the solvent/salt molecules.Combining advanced microscopy(high-resolution transmission electron microscopy,scanning electron microscopy)and surface science(X-ray photoelectron spectroscopy,time-of-fight secondary ion mass spectroscopy,Fourier-transform infrared spectroscopy,Raman spectroscopy),it is demonstrated that a thinner and more stable cathode electrolyte interphase(CEI)and solid electrolyte interphase(SEI)are formed.The CEI is rich in lithium sulfide(Li_(2)SO_(3)),while the SEI is rich in Li_(3)N and LiF.During cycling,the CEI/SEI suppresses both the deleterious transformation of the cathode R-3m layered near-surface structure into disordered rock salt and the growth of lithium metal dendrites.展开更多
β decay is one of the most fundamental and thoroughly studied nuclear decay. Surprisingly, the β decay rates were found to have a periodic time variability [1]. However, others argued that there is no evidence for s...β decay is one of the most fundamental and thoroughly studied nuclear decay. Surprisingly, the β decay rates were found to have a periodic time variability [1]. However, others argued that there is no evidence for such cyclic deviation from the exponential first order kinetics decay law [2]. Here we propose that the β decay is a pseudo-first order exchange reaction triggered by uddũexotic mesons and propose a QCD gas theory. In analogy to the atmospheric gas density, the proposed QCD gas density drops with elevation from the sun. Accordingly, we propose that the β decay rate periodic variability is due to the pseudo-first order exchange reaction kinetics and the QCD gas atmospheric density drop. The proposed QCD gas may be a possible candidate for Einstein’s general theory of relativity ether [3]. Our main results are the derived formulas for calculating the effective mass of the QCD gas and the cosmology perfect fluid equation of state dimensionless parameter, based on the measured ratio of the β decay rates at the earth trajectory aphelion and perihelion dates. .展开更多
The paper analyzes the concept of Ether and substantiates the necessity of its existence as a physical reality, which arises within the framework of the concept developed by the authors of the work. The authors come t...The paper analyzes the concept of Ether and substantiates the necessity of its existence as a physical reality, which arises within the framework of the concept developed by the authors of the work. The authors come to the conclusion that the existence of Ether in two different forms, plays an exceptional role in the formation of Dark Matter and Dark Energy and leads to the emergence of exotic cosmological structures and their hierarchy in energy, temporal, and spatial scale. The mechanism of the formation of physical structures before the Big Bang and their further evolution, up to the formation of worlds of galaxies and stars, is considered. The necessity of the emergence of exotic structures, such as 3 spheres of the Primary Relict, is shown, its structure and dynamic properties leading to the formation of Order from Chaos are considered. The role of the 1st and 2nd type Ether in the formation of the mechanism of transformation of cosmic energies and quantum phase transitions, in the process of the birth and evolution of the Universe is discussed. The conclusion is made about the existence of universal properties of matter, at the level of Macro and Microcosms, and a multidimensional cosmological model with an isothermal temperature distribution is constructed, leading to a discrete distribution of matter separated by transitions, by analogy with Black-and-White Holes. It is shown that the postulate of the constancy of the speed of light in any inertial system is a consequence of the principle of covariance.展开更多
基金supported by China National Natural Science Foundation(22008260,21908123)。
文摘Mordenite with different Si/Al ratios were synthesized by solvent-free method and used for dimethyl ether(DME)carbonylation reaction.The influence of Si/Al ratio in the feedstock on the structure,porosity and acid sites were systematically investigated.The characterization results showed that with the increase of Si/Al ratio in the feedstock,part of silicon species fail to enter the skeleton and the specific surface area and pore volume of the samples decreased.The amount of weak acid and medium strong acid decreased alongside with the increasing Si/Al ratio,and the amount of strong acid slightly increased.The Al atoms preferentially enter the strong acid sites in the 8 member ring(MR)channel during the crystallization process.The high Si/Al ratio sample had more acid sites located in the 8 MR channel,leading to more active sites for carbonylation reaction and higher catalytic performance.Appropriately increasing the Si/Al ratio was beneficial for the improvement of carbonylation reaction activity over the mordenite(MOR)catalyst.
基金supported by the Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(2021R1F1A1047203)financially supported by the Ministry of Trade,Industry and Energy(MOTIE)and Korea Institute for Advancement of Technology(KIAT)through the International Cooperative R&D program(P0026100)+1 种基金the NRF grant funded by the Korea government(MSIT)(2021R1I1A1A01061036)financial support from the NRF grant funded by the Korea government(MSIT)(RS-2023-00213920)。
文摘In the domain of perovskite solar cells(PSCs),the imperative to reconcile impressive photovoltaic performance with lead-related issue and environmental stability has driven innovative solutions.This study pioneers an approach that not only rectifies lead leakage but also places paramount importance on the attainment of rigorous interfacial passivation.Crown ethers,notably benzo-18-crown-6-ether(B18C6),were strategically integrated at the perovskite-hole transport material interface.Crown ethers exhibit a dual role:efficiently sequestering and immobilizing Pb^(2+)ions through host-guest complexation and simultaneously establishing a robust interfacial passivation layer.Selected crown ether candidates,guided by density functional theory(DFT)calculations,demonstrated proficiency in binding Pb2+ions and optimizing interfacial energetics.Photovoltaic devices incorporating these materials achieved exceptional power conversion efficiency(PCE),notably 21.7%for B18C6,underscoring their efficacy in lead binding and interfacial passivation.Analytical techniques,including time-of-flight secondary ion mass spectrometry(ToF-SIMS),ultraviolet photoelectron spectroscopy(UPS),time-resolved photoluminescence(TRPL),and transient absorption spectroscopy(TAS),unequivocally affirmed Pb^(2+)ion capture and suppression of non-radiative recombination.Notably,these PSCs maintained efficiency even after enduring 300 h of exposure to 85%relative humidity.This research underscores the transformative potential of crown ethers,simultaneously addressing lead binding and stringent interfacial passivation for sustainable PSCs poised to commercialize and advance renewable energy applications.
基金Supported by State Administration of Traditional Chinese Medicine High-level Key Discipline Construction Project of Traditional Chinese Medicine-Ethnic Minority Pharmacy (Zhuang Pharmacy) (zyyzdxk-2023165)General Scientific Research Program of Guangxi University of Chinese Medicine in 2020 (2020MS063)+4 种基金Key R&D Project of Guangxi Science and Technology Department (Guike AB21196057)Young Talent Cultivation Program of Guangxi International Zhuang Medicine Hospital (2022001)Funding Project of High-level Talent Cultivation and Innovation Team of Guangxi University of Chinese Medicine (2022A008)Guangxi Traditional Chinese Medicine Interdisciplinary Innovation Team Project (GZKJ2309)State Administration of Traditional Chinese Medicine"Twelfth Five-Year Plan"Key Discipline of Traditional Chinese Medicine (Ethnic Pharmacy)Zhuang Pharmacy.
文摘[Objectives]To establish a thin-layer chromatography(TLC)method for the determination of rubiadin-1-methyl ether in Yao Medicine Chuanlianzhu(Damnacanthus giganteus).[Methods]A silica gel G thin-layer plate was adopted for TLC.Petroleum ether(60-90℃)-chloroform-methanol-water(7:15:3:1)was used as the developing solvent and inspected under ultraviolet lamp(365 nm).The content was determined by Inertsil ODS-3 C 18 column(4.60 mm×250 mm,5μm),mobile phase:acetonitrile-0.2%phosphoric acid gradient elution,detection wavelength 277 nm,flow rate 1.0 mL/min,column temperature 30℃,injection volume 10μL.[Results]The spots of 10 Chuanlianzhu samples from different origins showed the same color at the same position as the control,and the spots were clear and specific.The injection volume of rubiadin-1-methyl ether showed a good linear relationship in the range of 2.90-145μg(R=0.9996).The average recovery rate of rubiadin-1-methyl ether in the low,medium and high dose groups of Yao Medicine Chuanlianzhu was 98.72%,and RSD=1.78%.[Conclusions]This method can effectively identify Yao Medicine Chuanlianzhu medicinal materials and accurately determine the content of rubiadin-1-methyl ether in the medicinal materials.It provides a scientific basis for the development and utilization of Yao Medicine Chuanlianzhu medicinal resources.
基金supported by the National Natural Science Foundation of China (21776145 and 21808117)。
文摘This wok proposed the extraction distillation coupled pervaporation(ED+PV) technology process using two different solvents to separate isopropanol(IPA) and diisopropyl ether(DIPE) from DIPE/IPA/H_(2)O ternary heterogeneous azeotropes in industrial wastewater from the synthesis of isopropanol in this study.Based on strict design specifications, simulation and sequential iteration methods are used for process design and optimization. Compared to the ethylene glycol(EG)-EG+H_(2)O process and the 1,3-propanediol(PDO)-IPA+H_(2)O process, the total annual cost(TAC) of the EG-IPA+H_(2)O process decreased by 20.76% and 7.86%(PDO). Compared to the EG-EG+H_(2)O process, the TAC of the PDO-IPA+H_(2)O process reduced 14%, but the global warming potential(GWP) and human toxicity of the PDO-IPA+H_(2)O process increased 11.3% and 4.07% respectively. Compared to the PDO-IPA+H_(2)O process, the EG-IPA+H_(2)O process saves 7.86%(TAC), 9.78%(GWP) and 9.85%(human toxicity). The ED+PV process with EG is superior to PDO in factors of TAC, energy consumption, human toxicity and environment. The EG-IPA+H_(2)O process changed the separation order of the products of the multi-azeotropic system, reduced the cost and energy conservation of the system, and enhanced the environmental protection evaluation of the process, is the best process through life cycle assessment for analyzing the economy, energy conservation, environmental assessment and human toxicity, designing cleaner products, controlling waste discharge, and promoting the chemical purification industry. This work provides a new process design and optimized separation ideas, will have a good guiding significance for the research and application separation of multi-azeotropic mixture with mixed solvents in organic wastewater from the cleaner chemical production, has been up to standard wastewater discharge process, and realized the development goal of carbon peak and carbon neutrality in the sustainable development of chemical clean industry.
文摘The iodine value (iodine number) and hydroxyl value are important analytical characteristics of fats and oils. The iodine (I<sub>2</sub>) required saturating the fatty acids present in 100 grams of the oil or fat. Iodine value is a measure of the total number of double bonds (-C=C-) present in fats and oils. Unsaturated compounds contain molecules with double and triple bonds which are very reactive towards iodine. The iodine value has been determined according to Hanus with iodine monobromide in glacial acetic acid, and then the amount of iodine remaining unreacted is determined by titration using sodium thiosulfate volumetric standard solution. The hydroxyl value is the amount of potassium hydroxide in milligrams that is equivalent to the hydroxyl amount of 1 gram of the sample (mg KOH/g sample). Poloxyl Stearyl Ether is a mixture of the monostearyl ethers of mixed polyethylene glycols. It may contain various amounts of free stearyl alcohol and some free polyethylene glycol. In this study, the iodine value and hydroxyl value have been determined by titration in polyoxyl stearyl ether. Iodine value 1.84 g of I<sub>2</sub> absorbed/100g sample, and hydroxyl value 162.65 mg KOH/g sample have been found in poloxyl stearyl ether. The iodine value and hydroxyl value results met the United States Pharmacopeia specifications for Polyoxyl Stearyl Ether.
基金Ariel UniversityIsrael National Research Center for Electrochemical PropulsionNew Technologies Research Centre,University of West Bohemia,Pilsen for financially supporting this research。
文摘In this work,the oxidation of a mixture of dimethyl ether(DME) and methyl formate(MF) was studied in both an aqueous electrochemical cell and a vapor-fed polymer electrolyte membrane fuel cell(PEMFC)utilizing a multi-metallic alloy catalyst,Pt_(3)Pd_(3)Sn_(2)/C,discovered earlier by us.The current obtained during the bulk oxidation of a DME-saturated 1 M MF was higher than the summation of the currents provided by the two fuels separately,suggesting the cooperative effect of mixing these fuels.A significant increase in the anodic charge was realized during oxidative stripping of a pre-adsorbed DME+MF mixture as compared to DME or MF individually.This is ascribed to greater utilization of specific catalytic sites on account of the relatively lower adsorption energy of the dual-molecules than of the sum of the individual molecules as confirmed by the density fu nctional theory(DFT) calculations.Fuel cell polarization was also conducted using a Pt_(3)Pd_(3)Sn_(2)/C(anode) and Pt/C(cathode) catalysts-coated membrane(CCM).The enhanced surface coverage and active site utilization resulted in providing a higher peak power density by the DME+MF mixture-fed fuel cell(123 mW cm^(-2)at 0.45 V) than with DME(84mW cm^(-2)at 0.35 V) or MF(28 mW cm^(-2)at 0.2 V) at the same total anode hydrocarbon flow rate,temperature,and ambient pressure.
文摘1. Introduction The Lithium-sulfur battery(LSB) shows promise as a highdensity energy source, with a theoretical energy density of approximately 2600 W h kg^(-1)[1]. However, practical application of the LSB has been hindered by the “shuttle effect” and Li anode corrosion [2,3]. Highly concentrated electrolytes(HCEs) have been proposed as a solution, as they can inhibit the dissolution of lithium polysulfide and promote homogeneous lithium deposition [4].
基金supported by the National Natural Science Foundation of China(U21A20332,52103226,52202275,52203314,and 12204253)the Distinguished Young Scholars Fund of Jiangsu Province(BK20220061)the Fellowship of China Postdoctoral Science Foundation(2021M702382)。
文摘Electrosynthesis of ammonia from the reduction of nitrogen is still confronted with the limited supply of gas reactant in dynamics as well as high activation barrier in thermodynamics.Unfortunately,despite tremendous efforts devoted to electrocatalysts themselves,they still fail to tackle the above two challenges simultaneously.Herein,we employ a heterogeneous catalyst adlayer-composed of crown ethers associated with Li^(+)ions-to achieve the dual promotion of dynamics and thermodynamics for ambient ammonia synthesis.Dynamically,the bound Li^(+)ions interact with the strong quadrupole moment of nitrogen,and trigger considerable reactant flux toward the catalyst.Thermodynamically,Li^(+)associated with the oxygen of crown ether achieves a higher density of states at the Fermi level for the catalyst,enabling effortless electron transfer from the catalysts to nitrogen and thus greatly reducing the activation barrier.As expected,the proof-of-concept system achieves an ammonia yield rate of 168.5μg h^(-1)mg^(-1)and a Faradaic efficiency of 75.3%at-0.3 V vs.RHE.This system-level approach opens up pathways for tackling the two key challenges that have limited the field of ammonia synthesis.
基金supported by the National Natural Science Foundation of China(22179124,21905265)the Fundamental Research Funds for the Central Universities(WK3430000007)。
文摘Ethers are promising electrolyte solvents for secondary Li metal batteries because of their excellent reduction stability.However,their oxidation stability has been mostly relying on the high concentration approach,and limited progress has been made on building effective interphase to protect the cathode from the corrosion of the electrolyte.In this work,we construct a semi-crystalline interfacial layer on the surface of Li(Ni_(0.8)Co_(0.1)Mn_(0.1))O_(2)cathode that can achieve improved electrochemical stability in the highly corrosive chemical environment formed by the decomposition of ether molecules.Different from traditional brittle crystalline interphases,the optimized semi-crystalline layer with low modulus and high ionic conductivity can effectively relieve electrode strain and maintain the integrity of the interface layer.Due to this design,the continuous oxidation decomposition of ether-based electrolytes could be significantly suppressed and the battery shows outstanding cycling stability(84%capacity retention after 300 cycles).This article provides a solution to address the oxidation instability issue of ether-based electrolytes.
基金financially supported by the National Natural Science Foundation of China(22072157,22293012,22179132,22121002)。
文摘Catalytic hydrogenolysis of aromatic ether bonds is a highly promising strategy for upgrading lignin into small-molecule chemicals,which relies on developing innovative heterogeneous catalysts with high activity.Herein,we designed porous zirconium phosphate nanosheet-supported Ru nanocatalysts(Ru/ZrPsheet)as the heterogeneous catalyst by a process combining ball milling and molten-salt(KNO_(3)).Very interestingly,the fabricated Ru/ZrPsheetshowed good catalytic performance on the transfer hydrogenolysis of various types of aromatic ether bonds contained in lignin,i.e.,4-O-5,a-O-4,β-O-4,and aryl-O-CH3,over a low Ru usage(<0.5 mol%)without using any acidic/basic additive.Detailed investigations indicated that the properties of Ru and the support were indispensable.The excellent activity of Ru/ZZrPsheetoriginated from the strong acidity and basicity of ZrPsheetand the higher electron density of metallic Ru0as well as the nanosheet structure of ZrPsheet.
基金the National Natural Science Foundation of China(Nos.41406090,42176045)the Science Foundation of Qingdao Agricultural University(No.631302)+1 种基金the Fujian Key Laboratory of Functional Marine Sensing Materials,Minjiang University(No.MJUKF-FMSM202102)the Natural Science Foundation of Shandong Province(Nos.ZR2019 MB020,ZR2020MB119)。
文摘Polybrominated diphenyl ethers(PBDEs)are a kind of serious pollutants in the ocean.Biodegradation is considered as an economical and safe way for PBDEs removal and reductive debromination dominates the initial pathway of anaerobic degradation.On the basis of experimental study,Octa-BDE 197,Hepta-BDE 183,Hexa-BDE 153,Penta-BDE 99 and Tetra-BDE 47 were selected as the initial degradation objects,and their debromination degradation were studied using density functional theory.The structures were optimized by Gaussian 09 program.Furthermore,the molecular orbitals and charge distribution were analyzed.All C-Br bond dissociation energies at different positions including ortho,meta and para bromine atoms were calculated and the sequence of debromination was obtained.There is a close relationship between molecular structure,charge,molecular orbital and C-Br bond.All PBDEs exhibited similar debromination pathways with preferential removal of meta and para bromines.
文摘A new electrophilic polymer, 2,4-dinitrophenyl ether of polyvinyl alcohol (PVA-DNP), having a degree of substitution of 0.5 was prepared from polyvinyl alcohol (PVA) and 1-fluro-2,4-dinitrobenzene (DNFB). The PVA-DNP polymer was characterized by NMR, IR, and UV-visible spectroscopy. The reaction of PVA-DNP with sodium methoxide was followed by NMR and UV-visible spectroscopy. Evidence of polymer bound spirocyclic SIGMA complex, C-1 and C-3 polymer bound DNP-methoxy SIGMA complexes and the formation and C-1 methoxy complex of 2,4-dinitroanisole was observed.
基金National Natural Science Foundation of China,Grant/Award Numbers:21905265,52072322,U1930402,61974042National Science Foundation,Civil,Mechanical and Manufacturing Innovation,Grant/Award Number:1911905+3 种基金Fundamental Research Funds for the Central Universities,Grant/Award Number:WK2060140026Department of Science and Technology of Sichuan Province,Grant/Award Numbers:2019‐GH02‐00052‐HZ,2019YFG0220Scientific and Technological Innovation Foundation of Shunde Graduate School,Grant/Award Number:BK19BE024National Key Research and Development Program of China,Grant/Award Number:2017YFA0303403。
文摘A new concentrated ternary salt ether-based electrolyte enables stable cycling of lithium metal battery(LMB)cells with high-mass-loading(13.8 mg cm^(−2),2.5 mAh cm^(−2))NMC622(LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2))cathodes and 50μm Li anodes.Termed“CETHER-3,”this electrolyte is based on LiTFSI,LiDFOB,and LiBF4 with 5 vol%fluorinated ethylene carbonate in 1,2-dimethoxyethane.Commer-cial carbonate and state-of-the-art binary salt ether electrolytes were also tested as baselines.With CETHER-3,the electrochemical performance of the full-cell battery is among the most favorably reported in terms of high-voltage cycling stability.For example,LiNi_(x)Mn_(y)Co_(1-x-y)O_(2)(NMC)-Li metal cells retain 80%capacity at 430 cycles with a 4.4 V cut-off and 83%capacity at 100 cycles with a 4.5 V cut-off(charge at C/5,discharge at C/2).According to simulation by density functional theory and molecular dynamics,this favorable performance is an outcome of enhanced coordination between Li^(+)and the solvent/salt molecules.Combining advanced microscopy(high-resolution transmission electron microscopy,scanning electron microscopy)and surface science(X-ray photoelectron spectroscopy,time-of-fight secondary ion mass spectroscopy,Fourier-transform infrared spectroscopy,Raman spectroscopy),it is demonstrated that a thinner and more stable cathode electrolyte interphase(CEI)and solid electrolyte interphase(SEI)are formed.The CEI is rich in lithium sulfide(Li_(2)SO_(3)),while the SEI is rich in Li_(3)N and LiF.During cycling,the CEI/SEI suppresses both the deleterious transformation of the cathode R-3m layered near-surface structure into disordered rock salt and the growth of lithium metal dendrites.
文摘β decay is one of the most fundamental and thoroughly studied nuclear decay. Surprisingly, the β decay rates were found to have a periodic time variability [1]. However, others argued that there is no evidence for such cyclic deviation from the exponential first order kinetics decay law [2]. Here we propose that the β decay is a pseudo-first order exchange reaction triggered by uddũexotic mesons and propose a QCD gas theory. In analogy to the atmospheric gas density, the proposed QCD gas density drops with elevation from the sun. Accordingly, we propose that the β decay rate periodic variability is due to the pseudo-first order exchange reaction kinetics and the QCD gas atmospheric density drop. The proposed QCD gas may be a possible candidate for Einstein’s general theory of relativity ether [3]. Our main results are the derived formulas for calculating the effective mass of the QCD gas and the cosmology perfect fluid equation of state dimensionless parameter, based on the measured ratio of the β decay rates at the earth trajectory aphelion and perihelion dates. .
文摘The paper analyzes the concept of Ether and substantiates the necessity of its existence as a physical reality, which arises within the framework of the concept developed by the authors of the work. The authors come to the conclusion that the existence of Ether in two different forms, plays an exceptional role in the formation of Dark Matter and Dark Energy and leads to the emergence of exotic cosmological structures and their hierarchy in energy, temporal, and spatial scale. The mechanism of the formation of physical structures before the Big Bang and their further evolution, up to the formation of worlds of galaxies and stars, is considered. The necessity of the emergence of exotic structures, such as 3 spheres of the Primary Relict, is shown, its structure and dynamic properties leading to the formation of Order from Chaos are considered. The role of the 1st and 2nd type Ether in the formation of the mechanism of transformation of cosmic energies and quantum phase transitions, in the process of the birth and evolution of the Universe is discussed. The conclusion is made about the existence of universal properties of matter, at the level of Macro and Microcosms, and a multidimensional cosmological model with an isothermal temperature distribution is constructed, leading to a discrete distribution of matter separated by transitions, by analogy with Black-and-White Holes. It is shown that the postulate of the constancy of the speed of light in any inertial system is a consequence of the principle of covariance.