Design and application of an autonomous Master Control System for a multi-layer magnetic and helioseismic telescope

With the growing significance of space weather forecasting,multi-layer magnetic and helioseismic telescopes are emerging as a key area of research.However,owing to the diverse operational processes and sophisticated hardware configurations of these devices,there is an urgent need for efficient autonomous observation capabilities.An autonomous Master Control System(MCS)can ensure efficient performance,data consistency,and stability,and the prototype presented here adopts a microservices architecture,breaking down the hardware into multiple subsystems and converting their functions into individual services.A central decision-making system leads the operations,supported by three auxiliary systems and three device control systems.Through inter-subsystem service calls,it achieves rapid imaging and spectroscopic monitoring.To verify system stability and observation efficiency,the system was tested on the Solar Full-disk Multi-layer Magnetograph.Experimental results verify this system can operate automatically for 4 consecutive months,acquire photospheric vector magnetic and Doppler velocity fields within a 15-minute interval,and measure chromospheric longitudinal magnetic and Doppler velocity fields in under 180 s.This ensures consistent and stable solar monitoring and serves as a practical methodological benchmark for the development of similar devices.

Basic Survey Scheduling for the Wide Field Survey Telescope(WFST)

Aiming at improving the survey efficiency of the Wide Field Survey Telescope, we have developed a basic scheduling strategy that takes into account the telescope characteristics, observing conditions, and weather conditions at the Lenghu site. The sky area is divided into rectangular regions, referred to as “tiles,” with a size of2°. 577 × 2°. 634 slightly smaller than the focal area of the mosaic CCDs. These tiles are continuously filled in annulars parallel to the equator. The brightness of the sky background, which varies with the moon phase and distance from the moon, plays a significant role in determining the accessible survey fields. Approximately 50connected tiles are grouped into one block for observation. To optimize the survey schedule, we perform simulations by taking into account the length of exposures, data readout, telescope slewing, and all relevant observing conditions. We utilize the Greedy Algorithm for scheduling optimization. Additionally, we propose a dedicated dithering pattern to cover the gaps between CCDs and the four corners of the mosaic CCD array, which are located outside of the 3° field of view. This dithering pattern helps to achieve relatively uniform exposure maps for the final survey outputs.

Design and assembly of a nested imaging X-ray telescope for the Hot Universe Baryon Surveyor mission

The Hot Universe Baryon Surveyor (HUBS) mission will carry a nested X-ray telescope capable of observing an energy range from 0.5 keV to 2 keV to study hot baryon evolution. In this paper, we report the latest progress in the design and construction of nested X-ray telescopes which were designed to use a three-stage conic-approximation type assembly to simplify the manufacturing process. The mirror substrate is made using the thermal glass slumping method, with mirrors characterized by a root-mean-square roughness of 0.3 nm, with expected high reflectivity and good thermal stability. We also discuss methods of telescope construction and conduct a deformation analysis of the manufactured mirror. The in situ measurement system program is developed to guide the telescope assembly process.

Design and Cryogenic Performance of a Hexapod Platform for a Large Ground-based Wide Field Survey Telescope

The thermal gradient is an important factor that causes degradation to the image quality of telescopes. In order to ensure the accurate alignment of the primary focus unit and the primary mirror, the hexapod platform(as a corrector) is investigated in this paper. First, a ground-based telescope with 2.5 m aperture and 3.5 deg field of view is described. The telescope is under construction, and it is expected to be finished in 2023. Second, the hexapod platform with flexure hinges utilized to adjust the primary focus unit is proposed, which is applied as a corrector.Then, the inverse kinematics of the platform is established and an open-loop control system is built based on it.Finally, the cryogenic performance test for the hexapod platform is performed. The experimental results show that the resolution and repeatability of the translation for the hexapod platform can be achieved at the micrometer level.The resolution and repeatability of the rotation can be achieved at the arc-second level. Therefore, the cryogenic performance of the hexapod platform can meet the optical imaging requirements of the wide-field ground-based telescope. The kinematic analysis and cryogenic performance tests in the paper provide a technical reference for the precise alignment of the primary focus unit and the primary mirror, which can improve the imaging quality of the telescope.

Disturbance Observer-based Pointing Control of Leighton Chajnantor Telescope

Leighton Chajnantor Telescope(LCT), i.e., the former Caltech Submillimeter Observatory telescope, will be refurbished at the new site in Chajnantor Plateau, Chile in 2023. The environment of LCT will change significantly after its relocation, and the telescope will be exposed to large wind disturbances directly because its enclosure will be completely open during observation. The wind disturbance is expected to be a challenge for LCT's pointing control since the existing control method cannot reject this disturbance very well. Therefore, it is very necessary to develop a new pointing control method with good capability of disturbance rejection. In this research, a disturbance observer—based composite position controller(DOB-CPC) is designed, in which an H∞feedback controller is employed to compress the disturbance, and a feedforward linear quadratic regulator is employed to compensate the disturbance precisely based on the estimated disturbance signal. Moreover, a controller switching policy is adopted, which applies the proportional controller to the transient process to achieve a quick response and applies the DOB-CPC to the steady state to achieve a small position error. Numerical experiments are conducted to verify the good performance of the proposed pointing controller(i.e., DOB-CPC) for rejecting the disturbance acting on LCT.

Analysis of optical axis deviation caused by structural stiffness in equatorial telescopes

The impact of structural stiffness on optical axis deviation poses a significant challenge in the design of equatorial telescope structures.A comprehensive analysis during the design process can reduce the reliance of a telescope on advanced control technologies,thereby improving its economic feasibility.Although full-system finite element analyses are reliable,they are encumbered by significant time requirements and limitations in covering all possible telescope orientations.Therefore,we propose an efficient and comprehensive analytical method to evaluate the optical axis deviation of equatorial telescopes across a full range of angles.To address the challenge of ensuring that the analysis covers all possible positions of an equatorial telescope,based on a model from SiTian project,we analyze the optical axis deviations caused by the fork arm at 25 different angles and then use fitting methods to obtain results for all angles.Based on the analysis results of the optical axis deviation caused by the stiffness of the optical tube in the horizontal position,we derive the results for the tube at any position using geometric relationships.Finally,we calculate the coupling factors and combine these impacts.Furthermore,we identify six discrete feature points to reflect possible telescope orientations and conduct comprehensive finite element analyses.The results are in alignment with those acquired through a comprehensive computational approach.

Prospects of the Multi-channel Photometric Survey Telescope in the Cosmological Application of Type Ia Supernovae

The Multi-channel Photometric Survey Telescope(Mephisto)is a real-time,three-color photometric system designed to capture the color evolution of stars and transients accurately.This telescope system can be crucial in cosmological distance measurements of low-redshift(low-z,z■0.1)Type Ia supernovae(SNe Ia).To optimize the capabilities of this instrument,we perform a comprehensive simulation study before its official operation is scheduled to start.By considering the impact of atmospheric extinction,weather conditions,and the lunar phase at the observing site involving the instrumental features,we simulate light curves of SNe Ia obtained by Mephisto.The best strategy in the case of SN Ia cosmology is to take the image at an exposure time of 130 s with a cadence of 3 days.In this condition,Mephisto can obtain hundreds of high-quality SNe Ia to achieve a distance measurement better than 4.5%.Given the on-time spectral classification and monitoring of the Lijiang 2.4 m Telescope at the same observatory,Mephisto,in the whole operation,can significantly enrich the well-calibrated sample of supernovae at low-z and improve the calibration accuracy of high-z SNe Ia.

A high-contrast imaging coronagraph for segmented-mirror large aperture telescopes using a spatial light modulator

The primary mirrors of current and future large telescopes always employ a segmented mirror configuration.The small but non-negligible gaps between neighboring segments cause additional diffraction,which restricts the performance of high-contrast coronagraph.To solve this problem,we propose a coronagraph system based on a single liquid crystal spatial light modulator(SLM).This spatial light modulator is used for amplitude apodization,and its feasibility and potential performance are demonstrated using a laboratory setup using the stochastic parallel gradient descent(SPGD)algorithm to control the spatial light modulator,which is based on point spread function(PSF)sensing and evaluation and optimized for maximum contrast in the discovery working area as a merit function.The system delivers a contrast in the order of 10−6,and shows excellent potential to be used in current and future large aperture telescopes,both on the ground and in space.

The Jiao Tong University Spectroscopic Telescope Project

The Jiao Tong University Spectroscopic Telescope(JUST)is a 4.4-meter f/6.0 segmented-mirror telescope dedicated to spectroscopic observations.The JUST primary mirror is composed of 18 hexagonal segments,each with a diameter of 1.1 m.JUST provides two Nasmyth platforms for placing science instruments.One Nasmyth focus fits a field of view of 10′and the other has an extended field of view of 1.2°with correction optics.A tertiary mirror is used to switch between the two Nasmyth foci.JUST will be installed at a site at Lenghu in Qinghai Province,China,and will conduct spectroscopic observations with three types of instruments to explore the dark universe,trace the dynamic universe,and search for exoplanets:(1)a multi-fiber(2000 fibers)medium-resolution spectrometer(R=4000-5000)to spectroscopically map galaxies and large-scale structure;(2)an integral field unit(IFU)array of 500 optical fibers and/or a long-slit spectrograph dedicated to fast follow-ups of transient sources for multi-messenger astronomy;(3)a high-resolution spectrometer(R~100000)designed to identify Jupiter analogs and Earth-like planets,with the capability to characterize the atmospheres of hot exoplanets.

Are James Webb Space Telescope Observations Consistent with Warm Dark Matter?

We compare observed with predicted distributions of galaxy stellar masses M* and galaxy rest-frame ultra-violet luminosities per unit bandwidth LUV, in the redshift range z=2 to 13. The comparison is presented as a function of the comoving warm dark matter free-streaming cut-off wavenumber kfs. For this comparison the theory is a minimal extension of the Press-Schechter formalism with only two parameters: the star formation efficiency, and a proportionality factor between the star formation rate per galaxy and LUV. These two parameters are fixed to their values obtained prior to the James Webb Space Telescope (JWST) data. The purpose of this comparison is to identify if, and where, detailed astrophysical evolution is needed to account for the new JWST observations.

Integrated Test System for Large-aperture Telescopes Based on Astrophotonics Interconnections

This study aims to improve the integrated testing of large-aperture telescopes to clarify the fundamental principles of an integrated testing system based on astrophotonics.Our demonstration and analyses focused on element-position sensing and modulation based on spatial near-geometric beams,high-throughput step-difference measurements based on channel spectroscopy,distributed broadband-transmittance testing,and standard spectral tests based on near-field energy regulation.Comprehensive analyses and experiments were conducted to confirm the feasibility of the proposed system in the integrated testing process of large-aperture telescopes.The results demonstrated that the angular resolution of the light rays exceeded 5arcsec,which satisfies the requirements for component-position detection in future large-aperture telescopes.The measurement resolution of the wavefront tilt was better than 0.45μrad.Based on the channel spectral method—which combined a high signal-to-noise ratio and high sensitivity,along with continuous-spectral digital segmentation and narrowband-spectral physical segmentation—a resolution of 0.050μm and a range of 50μm were obtained.After calibration,the measurement resolution of the pupil deviation improved to exceed 4%accuracy,and the transmission measurements achieved a consistency of over 2%accuracy.Regarding fringe-broadband interferometry measurements,the system maintained high stability,ensuring its operation within the coherence length,and robustly detected the energy without unwrapping the phase.The use of a projector for calibrating broadband-spectrum measurements led to a reduction in contrast from 0.8142 to 0.6038,which further validates the system's applicability in the integrated testing process of large-aperture telescopes.This study greatly enhanced the observational capabilities of large-aperture telescopes while reducing the integrated system's volume,weight,and power consumption.

FAST:The Five-Hundred-Meter Aperture Spherical Radio Telescope

In the 90 years since its inception,radio astronomy has become the setting of almost all major astronomical discoveries and a hothouse for Nobel Prizes in Physics.As a result,countries all over the world have actively explored new engineering concepts to build large-aperture radio telescopes.Limited by their self-weight and wind load,100 m radio telescopes are regarded as the maximum limit of traditional radio telescopes.This perspective allowed the Arecibo 305 m telescope—built by Cornell University in the United States in 1963—to dominate the field for more than half a century.During this period,scholars have been exploring how to further expand their horizons in order to make a breakthrough in the problem of the universe.

Terrain-influenced wind flow of the Qitai radio telescope site

The wind environment of a site is one of the important factors affecting the observation performance of large aperture and high-performance radio telescopes.Exploring the relationship between the effects of different terrains on wind flow is important to optimize the wind environment of the site.The terrain of the Qitai radio telescope(QTT)site located in east Tianshan Mountains at an elevation of about 1800 m was used to study the wind flow in the adjacent zone of antenna based on numerical simulation.The area from 600m south to 600m north of the antenna is defined as the antenna adjacent zone,and three groups of boundaries with different terrains are set up upstream and downstream,respectively.Since the zone where the antenna is located is a slope terrain,in order to verify the influence of terrain on the wind flow and to clarify the relationship between the influence of boundary terrain on the wind flow,a control group of horizontal terrain is constructed.The simulation results show that the wind flow is mainly influenced by the terrain.The highest elevation of the upstream and downstream boundary terrains affects the basic wind speed.The upstream boundary terrain has a greater impact on wind flow than the downstream boundary terrain.In addition,the wind speed profile index obtained by numerical simulation is smaller than the actual index for the wind from south.Therefore,the wind speed at the upper level(about 100 m)obtained by inversion based on the measured wind speed at the bottom(about 10 m)is also smaller than the actual wind speed.

Direct Ion Beam Figuring Process and Rotational Measurement Method for Ultra-smooth Aspherical Surfaces of a 46.5 nm Telescope

This paper describes a fabrication process for the hyperboloidal concave mirror of a 46.5 nm telescope. The180 mm aperture hyperboloidal concave mirror and 70 mm aperture compensator are machined directly from chemical mechanical polishing of a spherical surface to a high-accuracy aspherical surface by ion beam figuring.The aspherical measurement method is the Dall null test. To minimize system errors in the measurement process,the rotational measurement method with six rotations is used in the null test. The results of the analysis for the ME(first solve the machined surface profile, then solve the system errors) and EM(first solve the system errors, then solve the machined surface profile) methods of calculation in the measurement are given. The ME method is a more accurate rotational test method, and the six rotations are appropriate for rotational measurements. After the figuring process, the hyperboloidal concave mirror surface profile reached 8.27 nm rms and the compensator surface profile is approximately 4 nm rms. The roughness of the hyperboloidal concave mirror is smooth to0.160 nm rms.

Back Frame Section Size Optimization of Large Aperture Telescope

The back frame structure of a large radio telescope is an important component supporting the reflecting surface,which is directly related to the surface precision.Its optimal design is of key significance for ensuring the surface precision and reducing structural weight.Two methods are constructed to optimize the cross-section size of the telescope back frame in this paper,the criterion method and the first-order optimization method.The criterion method is based on the Lagrangian multiplier method and Kuhn-Tucker condition.This method first establishes the mathematical model by taking the inner and outer radiuses of the back frame beams as the design variables,the structural weight as the constraint condition,and the structural compliance as the objective function,then derives the optimization criterion.The first-order optimization method takes the inner and outer radiuses of the beams as the design variables,the back frame RMS as the objective function,and the structural weight as the constraint condition.Comparison of RMS,structural stress uniformity and optimization efficiency shows that both algorithms can effectively reduce structural deformation and improve RMS,but the criterion method has relatively better result than the first-order method.

Distributed Control Software for the Active Surface System of Tian-ma Radio Telescope

The Tian-ma Radio Telescope(TMRT) applies an Active Surface System(ASFS), which corrects for large-scale deformations due to gravity and thermal on the primary reflector. The centralized and automated management of the ASFS using software has become a challenge, for which we have developed the TMRT Active Surface System Control Software(TASCS). This paper describes the design and implementation of TASCS for device control,status monitoring, human-computer interaction, and data management functionalities. TASCS adopts the opensource Tango Controls framework and distributes middleware technology to realize real-time automated adjustment of the primary reflector through remote centralized control of a large number of actuators. At present, it has been successfully deployed on the TMRT and has played an important role in Event Horizon Telescope observations.

Two annular CsI(Tl) detector arrays for the charged particle telescopes

In this study,we constructed two annular detector arrays comprising 24 wedge-shaped CsI(Tl) crystals,and tested them using anαsource and radioactive beams of ^(14-16) Con a CD_2 target.We compared the properties of a CsI(Tl) crystal encapsulated with various reflectors,revealing that using the 80-μm-thick ESR film to pack the CsI(Tl) crystal yielded the largest light output with the smallest non-uniformity in light output (ΔLO).For the 24 CsI(Tl) detectors with the 80-μm-thick ESR films,the average energy resolution improved as the average light output increased;however,it deteriorated as theΔLO value increased.To form two annular Si-CsI(Tl) telescopes for identifying the light-charged particles,theΔLO value and energy resolution of each CsI(Tl) detector were maintained under 20%and 7.7%,respectively.These telescopes were tested for the first time in a direct nuclear reaction experiment using ^(14-16) C+d.The results demonstrated that the Z=1 and Z=2 charged particles were adequately discriminated by the telescopes using the standardΔE-E method.

文献“GLAST large area telescope calorimeter subsystem:vibration test”点评

文章点评的对象是一个执行宇宙粒子物质观测任务的高分辨率、长寿命、高可靠光学部组件.点评的中心内容是关于"大面积望远镜"地面振动试验,包括对试验任务的提出、试验的具体实施以及试验后的设计评审、合格标准、技术规范等等地面力学环境试验要素进行一一介绍与评述,以供业内人士参考或商榷.

Rapid instrument exchanging system for the Cassegrain focus of the Lijiang 2.4-m Telescope

As a facility used for astronomical research, the Lijiang 2.4-m telescope of Yunnan Astronomical Observatories, requires the ability to change one auxiliary instrument with another in as short a time as possible. This arises from the need to quickly respond to scientific programs （e.g. transient observation, time domain studies） and changes in observation conditions （e.g. seeing and weather conditions）. In this paper, we describe the design, construction and test of hardware and software in the rapid instrument exchange system （RIES） for the Cassegrain focal station of this telescope, which enables instruments to be quickly changed at night without much loss of observing time. Tests in the laboratory and at the telescope show that the image quality and pointing accuracy of RIES are satisfactory. With RIES, we observed the same Landolt standard stars almost at the same time with the Princeton Instruments VersArray 1300B Camera （PICCD） and the Yunnan Faint Object Spectrograph and Camera （YFOSC）, while both were mounted at the Cassegrain focus. A quasi-simultaneous comparison shows that the image quality of the optical system inside the YFOSC is comparable with that provided by the PICCD.

Lijiang 2.4-meter Telescope and its instruments

The Lijiang 2.4-meter Telescope(LJT), the largest common-purpose optical telescope in China,has been available to the worldwide astronomical community since 2008. It is located at the Gaomeigu site,Lijiang Observatory(LJO), in the southwest of China. The site has very good observational conditions.During its 10-year operation, several instruments have been equipped on the LJT. Astronomers can perform both photometric and spectral observations. The main scientific goals of LJT include recording photometric and spectral evolution of supernovae, reverberation mapping of active galactic nuclei, investigating the physical properties of binary stars and near-earth objects(comets and asteroids), and identification of exoplanets and all kinds of transients. Until now, the masses of 41 high accretion rate black holes have been measured, and more than 168 supernovae have been identified by the LJT. More than 190 papers related to the LJT have been published. In this paper, the general observation conditions of the Gaomeigu site is introduced at first. Then, the structure of the LJT is described in detail, including the optical, mechanical, motion and control system. The specification of all the instruments and some detailed parameters of the YFOSC is also presented. Finally, some important scientific results and future expectations are summarized.