Determination of aniline in environmental water samples by alternating-current oscillopolarographic titration

A new method for the determination of aniline in environmental water based on oscillopolarographic titration was presented in this paper. Several factors including the kind, concentration, and volume of acid, the dosage of potassium bromide, the temperature and concentration of concomitant substances were investigated in detail. The experimental results indicated that this method was simple, rapid, and sensitive. The linear range was 8.367 × 10(?4) to 2.789 × 10(?2) mol L(?1), the relative standard deviation (R.S.D.) was lower than 0.96%, and the spiked recoveries of aniline in environmental water samples were in the range of 99.4–106.9% under the optimal conditions. The results indicated that the present method could be used as an alternative method for aniline determination in realworld water samples.

Experimental design to measure the anchoring energy on substrate surface by using the alternating-current bridge

The anchoring property of the substrate surface of liquid crystal cells plays an important role in display and nondisplay fields. This property directly affects the deformation of liquid crystal molecules to change the phase difference through liquid crystal cells. In this paper, a test method based on the alternating-current bridge is proposed to determine the capacitance of liquid crystal cells and thus measure the anchoring energy of the substrate surface. The anchoring energy can be obtained by comparing the capacitance-voltage curves of twisted nematic liquid crystal cells with different anchoring properties in experimental and theoretical results simulated on the basis of Frank elastic theory. Compared with the other methods to determine the anchoring energy, our proposed method requires a simple treatment of liquid crystal cells and allows easy and high-accuracy measurements, thereby expanding the test ideas on the performance parameters of liquid crystal devices.

Rapid determination of phenolic compounds in water samples by alternating-current oscillopolarographic titration

A rapid, simple and sensitive method was demonstrated for the determination of phenolic compounds in water samples by alternating-current oscillopolarographic titration. With the presence of sulfuric acid, phenol could be transferred into a nitroso-compound by reacting with NaNO2. The titration end-point was obtained by the formation of a sharp cut in the oscillopolarographic with infinitesimal NaNO2 on double platinum electrodes. The results showed that phenol had an excellent linear relationship over the range of 4.82×10^-6 -9.65×10^-3 mol/L, the RSD of the proposed method was lower than 1.5%, and the spiked recoveries of three real water samples were in the range of 95.6%-106.9%.

Alternating-current losses in two-layer superconducting cables consisting of second-generation superconductors coated by U-shaped ferromagnetic materials

Alternating-current losses in a two-layer superconducting cable, each layer being composed of 15 closely-spaced rectangular wires made up of second-generation superconductors when the ends of wires are coated by either a non-magnetic or strong ferromagnetic material having a U profile is numerically investigated. Computations are carried out through the finite-element method. The alternating-current losses do not increase significantly if the relative permeability of the coating is increased three orders of magnitude, provided that the current amplitude is less than half of the critical current in a superconducting wire. However, the losses are much higher for ferromagnetic coating if the amplitude of the applied current oscillating at 50 Hz is close to the critical current. The ferromagnetic coating is seen to accumulate the magnetic field lines normally on its surfaces, while the field lines are parallel to the long axes of the wires, leading to more significant flux penetration in the coated regions. This facilitates a uniform low-loss current flow in the uncoated regions of the wires. In contrast, coating with a non-magnetic material gives rise to a considerably smaller current flow in the uncoated regions, whereas the low-loss flow is maintained in the coated regions. Moreover, the current flows in opposite directions in the coated and uncoated regions, where the direction in each region is converse for the two materials.

Research on the electrical characteristics of an organic thin-film field-effect transistor based on alternating-current resistance

In this article, an organic thin-film field-effect transistor （OTFFET） with top-gate and bottom-contact geometry based on pentacene as the active layer is fabricated. The experimental data of the I-V are obtained from the OTFFET device. The alternating-current （AC） resistance value of the OTFFET device is calculated using the derivation method from the experimental data, and the AC resistance trend curves of the OTFFET device are obtained with the region fitting method. We analyse the characteristics of the OTFFET device with an AC resistance trend curve. To discover whether it has a high resistance, it is proposed to judge the region of the source/drain voltage （VDs） less than the transition voltage, thereby determining whether the contact between the metal electrode and the organic semiconductor layer of the OTFFET device is Ohmic or non-Ohmic. The theoretical analysis shows that the field-effect mobility and the AC resistance are in reverse proportion. Therefore, we point out that reducing AC resistance is necessary if field-effect mobility is to be improved.

Ignition Characteristics of Lean Coal Used a Novel Alternating-Current Plasma Arc Approach

In order to achieve the target of reducing oil consumption to zero for pulverized coal(PC)boiler in power plant,the paper developed a novel coal pulverized ignition approach,called as Alternating-Current plasma(AC plasma)ignition,with the advantages of excellent PC combustion behavior and longer electrode life-span.The scientific principle of how to generate the AC plasma arc was elaborated in detail.First,the experiments on life-span of electrodes inside AC plasma generator had been conducted,finding a workable way to extend its life-span beyond 530 hours.Second,a new AC plasma burner specifically designed for lean coal according to the principle of PC staged combustion had been illustrated with diagrams and then used to ignite the PC-air stream under four kinds of conditions with a varying AC plasma power from 150 kW to 300 kW,focusing on analyses of the influence of AC plasma power on combustion behaver,such as combustion temperature,carbon burnout rate as well as PC combustion regime.The following results showed that in the case of the power of the AC plasma was P=300 kW,a satisfied PC combustion process could achieved,with the average PC combustion temperature of about 940°C,combustion flame length of 6.3 m,and the total carbon burnout rate of up to 52.2%.In addition,about 80%of the nozzle outlet section was filled with bright flame,while 81%of the PC was in zone of the cylindrical flame regime.The PC combustion modes were changed repeatedly during the process of combustion,which went from homogeneous combustion mode at initial ignition stage to combined combustion mode and heterogeneous combustion mode at middle stage,finally to combined combustion mode at later stage.The research conclusion in this paper has proved that the AC plasma ignition approach is feasible and effective to ignite low-rank coal without the present of fuel oil.

Electric field distribution and effective nonlinear AC and DC responses of graded cylindrical composites

The perturbation method is used to study the localization of electric field distribution and the effective nonlinear response of graded composites under an external alternating-current（AC） and direct-current（DC） electric field E app = E 0（1 ＋ sin ωt）.The dielectric profile of the cylindrical inclusions is modeled by function ε i（r） = C k r k（r ≤ a）,where r is the radius of the cylindrical inclusion,and C k,k,a are parameters.In the dilute limit,the local potentials and the effective nonlinear responses at all harmonics are derived.Meanwhile,the general effective nonlinear responses are also derived and compared with the effective nonlinear responses at harmonics under the AC and DC external field.It is found that the effective nonlinear AC and DC responses at harmonics can be calculated by those of the general effective nonlinear of the graded composites under the external DC electric field.Moreover,the obtained local electrical fields show that the electrical field distribution in the cylindrical inclusions is controllable,and the maximum of the electric field inside the cylinder is at its center.

Carbon Dots-in-Zeolite via In-Situ Solvent-Free Thermal Crystallization:Achieving High-Efficiency and Ultralong Afterglow Dual Emission

Organic afterglow materials are highly desirable for optoelectronic applications,but they usually suffer from complex preparation process,low quantum efficiency,and short lifetime due to the ultrafast deactivation of the highly active excited states involved.Here,we succeeded in achieving solventfree thermal syntheses of high-efficiency afterglow CDs@zeolite composite materials by simply grinding the solid raw materials of zeolite and precursor CDs at room temperature,followed by thermal crystallization.This method afforded maximum embedding of CDs into growing zeolite crystals,as well as strong host–guest interaction to surpass the nonradiative transition of CDs,thus producing composite materials with ultralong dual emission of thermally activated delayed fluorescence and room temperature phosphorescence with a record high lifetime of 1.7 and 2.1 s,respectively,and the quantum yield of 90.7%.Furthermore,in a preliminary experiment,we applied the composite materials in alternatingcurrent light-emitting diode supplementary lighting,which exhibited a promising potential in optoelectronic applications.