Fabrication and application of nano/microcrystalline composite diamond coated drawing dies using alternative carbon sources

Nano/microcrystalline composite diamond films were deposited on the holes of WC-6%Co drawing dies by a two-step procedure using alternative carbon sources, i.e., methane for the microcrystalline diamond（MCD） layer and acetone for the nanocrystalline diamond（NCD） layer. Moreover, the monolayer methane-MCD and acetone-NCD coated drawing dies were fabricated as comparisons. The adhesion and wear rates of the diamond coated drawing dies were also tested by an inner hole polishing apparatus. Compared with mono-layer diamond coated drawing die, the composite diamond coated one exhibits better comprehensive performance, including higher adhesive strength and better wear resistance than the NCD one, and smoother surface（Ra=65.3 nm） than the MCD one（Ra=95.6 nm） after polishing at the same time. Compared with the NCD coated drawing die, the working lifetime of the composite diamond coated one is increased by nearly 20 times.

Effect of different carbon sources on performance of an A2N- MBR process and its microbial community structure

Effect of different carbon sources on purification performance and change of microbial community structure in a novel AzN-MBR process were investigated, The results showed that when fed with acetate, propionate or acetate and propionate mixed （ 1 ： 1 ） as carbon sources, the effluent COD, NH4＋- N, TN and TP were lower than 30, 5, 15 and 0.5 mg-L-1, respectively. However taken glucose as carbon source, the TP concentration of effluent reached 2.6 1 mg.L-1. Process analysis found that the amount of anaerobic phosphorus release would be the key factor to determine the above effectiveness. The acetate was beneficial to the growth of Candidatus Accumulibacter associated with biological phosphorus removal, which was the main cause of high efficiency phosphorus removal in this system. In addition, it could eliminate the Candidatus Competibacter associated with glycogen-accumulating organisms and guarantee high efficiency phosphorus uptake of phosphorus accumulating organisms in the system with acetate as carbon source.

Enhanced biological phosphorus removal using thermal alkaline hydrolyzed municipal wastewater biosolids

This study reports the feasibility of using municipal wastewater biosolids as an alternative carbon source for biological phosphorus removal.The biosolids were treated by a lowtemperature,thermal alkaline hydrolysis process patented by Lystek International Inc.(Cambridge,ON,Canada)to produce short-chain volatile fatty acids and other readily biodegradable organics.Two sequencing batch reactors(SBRs)were operated with synthetic volatile fatty acids(Syn VFA)and readily biodegradable organics produced from the alkaline hydrolysis of municipal wastewater biosolids(Lystek)as the carbon source,respectively.Municipal wastewaters with different strengths and COD:N:P ratios were tested in the study.The reactors’performances were compared with respect to nitrogen and phosphorus removal.It was observed that phosphorus removal efficiencies were between 98%–99%and 90%–97%and nitrogen removal efficiencies were 78%–81%,and 67%for the Syn VFA and Lystek,respectively.However,the kinetics for phosphorus release and uptake during the anaerobic and aerobic stages with Lystek were observed to be significantly lower than Syn VFA due to the presence of higher order VFAs(C4 and above)and other fermentable organics in the Lystek.