Effect of alternative magnetic field on the diffusion layer growth in Al/Zn couple

The influence of an alternative magnetic field on the growth of the diffusionlayer in Al-Zn diffusion couple was studied. The thickness of the diffusion layer was examined. Theresults show that the alternative magnetic field increases the thickness of the diffusion layer andthe effect increases with the intensity and frequency of the alternative magnetic field increasing. The growth of the diffusion layer obeys the parabolic rate law and the growth rateincreases with the application of the alternative magnetic field. This growth rate change ismanifested through a change in the frequency factor k_0 and not through a change in the activationenergy Q. The frequency factor k_0 for the diffusion layer growth with the alternative magneticfield is 5.03 cm^2/s and the one without the magnetic field is 3.84 cm^2/s.

Influence of Alternative Magnetic Field on the Diffusion of Al and Mg

The influence of an alternative magnetic field on the diffusion of Al and Mg in AI-Mg diffusion couple is studied. The diffusion zone is composed of two intermediate phases, namelyβ and γ phase. Thickness of each intermediate phase is examined. The results show that the alternative magnetic field increases the thicknesses of βand γ phase zone and the layer growth ofβ and γphase obeys the parabolic rate law. The growth rate of the β and γ phase are increased with the application of the alternative magnetic field. This change is manifested through a change in the frequency factor k0 and not through a change in the activation energy Q. The frequency factor k0 for intermediate phase growth with an alternative magnetic field is 39.95 cm2/s for 7 phase and 2.84×10-4 cm2/s for β phase compared with those without the magnetic field is 22.4 cm2/s for 7 phase and 1.53×10-4 cm2/s for β phase.

Diagnosing ratio of electron density to collision frequency of plasma surrounding scaled model in a shock tube using low-frequency alternating magnetic field phase shift

A non-contact low-frequency(LF)method of diagnosing the plasma surrounding a scaled model in a shock tube is proposed.This method utilizes the phase shift occurring after the transmission of an LF alternating magnetic field through the plasma to directly measure the ratio of the plasma loop average electron density to collision frequency.An equivalent circuit model is used to analyze the relationship of the phase shift of the magnetic field component of LF electromagnetic waves with the plasma electron density and collision frequency.The applicable range of the LF method on a given plasma scale is analyzed.The upper diagnostic limit for the ratio of the electron density(unit:m^(-3))to collision frequency(unit:Hz)exceeds 1×10^(11),enabling an electron density to exceed 1×10^(20)m^(-3)and a collision frequency to be less than 1 GHz.In this work,the feasibility of using the LF phase shift to implement the plasma diagnosis is also assessed.Diagnosis experiments on shock tube equipment are conducted by using both the electrostatic probe method and LF method.By comparing the diagnostic results of the two methods,the inversion results are relatively consistent with each other,thereby preliminarily verifying the feasibility of the LF method.The ratio of the electron density to the collision frequency has a relatively uniform distribution during the plasma stabilization.The LF diagnostic path is a loop around the model,which is suitable for diagnosing the plasma that surrounds the model.Finally,the causes of diagnostic discrepancy between the two methods are analyzed.The proposed method provides a new avenue for diagnosing high-density enveloping plasma.

Effects of alternating magnetic field on the corrosion rate and corrosion products of copper

The effects of alternating magnetic field on the corrosion morphologies, corrosion rate, and corrosion products of copper in 3.5% NaCl solution, sea water, and magnetized sea water were investigated using electrochemical test, scanning electron microscopy/energy dispersive analysis system of X-ray （SEM/EDAX）, and X-ray diffraction （XRD）. The results show that the corrosion rate of copper in magnetized sea water is minimal. Moreover, the surface of the specimen in magnetized sea water is uniform and compact as compared with those in 3.5% NaCl solution and sea water. The corrosion products of copper in magnetized sea water are mainly Cu2O and CuCl2. However, the corrosion products in sea water are CuCl, Cu2Cl（OH）3, and FeCl3-6H2O. The electrochemical corrosion mechanisms of copper in the three media were also discussed.

Numerical simulation of applied electromagnetic field and electromagnetic force in all-position welding

All-position welding is an important technology in energy sources, chemical, shipbuilding and other industries. When welding current is larger than 200 A, the molten metal tends to flow down due to the force of gravity. In order to ＂push＂ the molten metal into the weld, a new kind of U-frame excitation model, which could produce electromagnetic force to balance the gravity of the molten pool, was designed. The related parameters of the excitation model were simulated by Maxwell 3D, and the relationships between the parameters and the magnetic induction intensity were analyzed. Finally, the electromagnetic force in the molten pool was calculated, and the appropriate parameters of the U-frame excitation model were determined. The results of the simulation verify the feasibility of the all-position welding excitation model.

Investigation of the application of a magnetic abrasive finishing process using an alternating magnetic field for finishing micro-grooves

A magnetic abrasive finishing process using an alternating magnetic field is proposed for the finishing of complex surfaces.In an alternating field,the periodic changes in current will cause the magnetic cluster used as a magnetic brush to fluctuate,which will not only continuously replace the abrasive particles in contact with the workpiece,but also periodically adjust the shape of the magnetic cluster to better fit the surface of the workpiece.In this paper,the influence of a combination of alternating and static magnetic fields on the magnetic field in the finishing area is analyzed.The feasibility of this process for finishing micro-grooves is investigated.Simulations and experimental measurements show that the combination of alternating and static magnetic fields can retain the advantages of the alternating field while increasing the magnetic flux density in the finishing area.The experimental results show that the process is feasible for finishing micro-grooves,with an excellent deburring effect on the groove edges.

Determination of the heating efficiency of magnetotactic bacteria in alternating magnetic field

Magnetotactic bacteria(MTB)intact cells have been applied in magnetic hyperthermia therapy of tumor,showing great efficiency in heating for tumor cell inhibition.However,the detailed magnetic hyperthermia properties and optimum heat production conditions of MTB cells are still poorly understood due to lack of standard measuring equipment.The specific absorption rate(SAR)of MTB cells is often measured by home-made equipment at a limited frequency and magnetic field amplitude.In this study,we have used a commercial standard system to implement a comprehensive study of the hyperthermic response of Magnetospirillum gryphiswaldense MSR-1 strain under 7 frequencies of 144-764 kHz,and 8 field amplitudes between 10 and 45 kA/m.The measurement results prove that the SAR of MTB cells increases with magnetic field frequency and amplitude within a certain range.In combination with the magnetic measurements,it is determined that the magnetic hyperthermia mechanism of MTB mainly follows the principle of hysteresis loss,and the heat efficiency of MTB cells in alternating magnetic field are mainly aff ected by three parameters of hysteresis loop,saturation magnetisation,saturation remanent magnetisation,and coercivity.Thus when we culture MTB in LA-2 medium containing sodium nitrate as source of nitrogen,the SAR of MTB LA-2 cells with magnetosomes arranged in chains can be as high as 4925.6 W/g(in this work,all SARs are calculated with iron mass)under 764 kHz and 30 kA/m,which is 7.5 times than current commercial magnetic particles within similar size range.

A Double-Phase High-Frequency Traveling Magnetic Field Developed for Contactless Stirring of Low-Conducting Liquid Materials

The use of low electrically conducting liquids is more and more widespread.This is the case for molten glass,salt or slag processing,ionic liquids used in biotechnology,batteries in energy storage and metallurgy.The present paper deals with the design of a new electromagnetic induction device that can heat and stir low electricallyconducting liquids.It consists of a resistance-capacity-inductance circuit coupled with a low-conducting liquid load.The device is supplied by a unique electric power source delivering a single-phase high frequency electric current.The main working principle of the circuit is based on a double oscillating circuit inductor connected to the solid-state transistor generator.This technique,which yields a set of coupled oscillating circuits,consists of coupling a forced phase and an induced phase,neglecting the influence of the electric parameters of the loading part(i.e.,the low-conductivity liquid).It is shown that such an inductor is capable to provide a two-phase AC traveling magnetic field at high frequency.To better understand the working principle,the present work improves a previous existing simplified theory by taking into account a complex electrical equivalent diagram due to the different mutual couplings between the two inductors and the two corresponding induced current sets.A more detailed theoretical model is provided,and the key and sensitive elements are elaborated.Based on this theory,equipment is designed to provide a stirring effect on sodium chloride-salted water at 40 S/m.It is shown that such a device fed by several hundred kiloHertz electric currents is able to mimic a linear motor.A set of optimized operating parameters are proposed to guide the experiment.A pure electromagnetic numerical model is presented.Numerical modelling of the load is performed in order to assess the efficiency of the stirrer with a salt water load.Such a device can generate a significant liquid motion with both controlled flow patterns and adjustable amplitude.Based on the magnetohydrodynamic theory,numerical modeling of the salt water flow generated by the stirrer confirms its feasibility.

Electron-Cyclotron Laser Using Free-Electron Two-Quantum Stark Radiation in a Strong Uniform Axial Magnetic Field and an Alternating Axial Electric Field in a Voltage-Supplied Pill-Box Cavity

We consider the radiation from the beam electrons traveling in a strong uniform axial magnetic field and an axial alternating electric field of wavelength Aw generated by a voltage-supplied pill-box cavity. The beam electrons emit genuine laser radiation that propagates only in the axial direction through free-electron two- quantum Stark radiation. We find that laser radiation takes place only at the expense of the axial kinetic energy when Aw 〈〈 c/（ωc/γ）, where ωc/γ is the relativistic electron--cyclotron frequency. We formulate the laser power based on quantum-wiggler electrodynamics, and envision a laser of length lore with estimated power 0.1 GW/（kA） in the 10-4 cm wavelength range.

A Simulation Study on the Specific Loss Power in Magnetic Hyperthermia in the Presence of a Static Magnetic Field

Our purpose in this study was to present a method for estimating the specific loss power (SLP) in magnetic hyperthermia in the presence of an external static magnetic field (SMF) and to investigate the SLP values estimated by this method under various diameters (D) of magnetic nanoparticles (MNPs) and amplitudes (H0) and frequencies (f) of an alternating magnetic field (AMF). In our method, the SLP was calculated by solving the magnetization relaxation equation of Shliomis numerically, in which the magnetic field strength at time t (H(t)) was assumed to be given by , with Hs being the strength of the SMF. We also investigated the SLP values in the case when the SMF with a field-free point (FFP) generated by two solenoid coils was used. The SLP value in the quasi steady state (SLPqss) decreased with increasing Hs. The plot of the SLPqss values against the position from the FFP became narrow as the gradient strength of the SMF (Gs) increased. Conversely, it became broad as Gs decreased. These results suggest that the temperature rise and the area of local heating in magnetic hyperthermia can be controlled by varying the Hs and Gs values, respectively. In conclusion, our method will be useful for estimating the SLP in the presence of both the AMF and SMF and for designing an effective local heating system for magnetic hyperthermia in order to reduce the risk of overheating surrounding healthy tissues.

Magnetic-mediated hyperthermia for cancer treatment:Research progress and clinical trials

Research progress and frontiers of magnetic-mediated hyperthermia （MMH） are presented, along with clinical trials in Germany, the US, Japan, and China. Special attention is focused on MMH mediated by magnetic nanoparticles, and multifunctional magnetic devices for cancer multimodality treatment are also introduced.

Aerospace Electromagnetic Thruster with Average Foucault Currents

The work is an attempt to find the force with which an electromagnetic system with Foucault currents acts on itself. It is taken into account that the average force with which the source of the alternating magnetic field and the inductive Foucault current is equal to zero, the self-force arises as a result of the interaction of unclosed Foucault conduction currents with the displacement current created by a conductor located in a non-uniform magnetic field. The average force acting on a symmetrical conductor located between the poles of an electromagnet turned out to be different from zero. The greatest value of this force is observed in the region of maximum inhomogeneity of the magnetic field.

Methods for Estimating Specific Loss Power in Magnetic Hyperthermia Revisited

Our purpose in this study was to present three methods for estimating specific loss power (SLP) in magnetic hyperthermia with use of an alternating magnetic field (AMF) and magnetic nanoparticles (MNPs) and to compare the SLP values estimated by the three methods using simulation studies under various diameters of MNPs (D), amplitudes (H0) and frequencies of AMF (f). In the first method, the SLP was calculated by solving the magnetization relaxation equation of Shliomis numerically (SLP1). In the second method, the SLP was obtained by solving Shliomis’ relaxation equation using the complex susceptibility (SLP2). The third method was based on Rosensweig’s model (SLP3). The SLP3 value changed largely depending on the magnetic field strength (H) in the Langevin parameter (§) and it became maximum (SLP3max) and minimum (SLP3min) when H was 0 and ±H0, respectively. The relative difference between SLP1 and SLP2 was the largest and increased with increasing D and H0, whereas that between SLP1 and was the smallest and was almost constant regardless of D and H0, suggesting that H in ξ should be taken as H0 in estimating the SLP using Rosensweig’s model. In conclusion, this study will be useful for optimizing the parameters of AMF in magnetic hyperthermia and for the optimal design of MNPs for magnetic hyperthermia.

Parametric instability of a liquid metal sessile drop under the action of low-frequency alternating magnetic fields

A 2-D mathematical model is developed in order to simulate a parametric electromagnetic instability oscillation process of a liquid metal droplet under the action of low frequency magnetic field. The Arbitrary Lagrangian-Eulerian （ALE） method and weak form constraint boundary condition are introduced in this model for implementation of the surface tension and electromagnetic force on liquid droplet free surface. The results of the numerical calculations indicate the appearance of various regimes of oscillation. It is found that according to the magnetic field frequency various types of oscillation modes may be found. The oscillation is originated from an instability phenomenon. The stability diagram of liquid metal droplet in the parameter space of magnetic frequency and magnetic flux density is determined numerically. The diagram is very similar to that found in the so-called parametric instability.

Clinical efficacies of treating refractory insomnia patients with estazolam plus alternating current magnetic field

As one of common physical and mental ailments, insomnia may cause serious adverse effects on a patient＇s daily life. And serious accidents occur in long-term cases.1 Despite comprehensive treatments, 9.38%-17.0% of the treated insomniacs fail to benefit at all. Thus the term of ＂refractory insomnia＂ has been coined.24 At present, there is no literature reporting the roles of estazolam plus alternating current magnetic field （ACMF） for treating insomnia. In the present study, estazolam plus ACMF was employed for the patients with refractory insomnia so as to explore the clinical efficacies of such a combined modality.

Hot Tearing Susceptibility of AXJ530 Alloy Under Low-Frequency Alternating Magnetic Field

Herein, a hot tearing measured system with external excitation coil and a differential thermal analysis system with applied magnetic field were used to study the effects of low-frequency alternating magnetic field on the solidification behavior and hot tearing susceptibility(HTS) of the AXJ530 alloy under different magnetic field parameters. The hot tearing volume of the castings was measured via paraffin infiltration method. The microstructure of the hot tearing zone of the casting was observed using optical microscopy and scanning electron microscopy, and the phase composition was analyzed using X-ray diffraction and energy depressive spectroscopy. The experimental results show that the solidification interval of AXJ530 alloy was shortened and the dendrite coherency temperature of the alloy decreased with the increase in frequency of alternating magnetic field. Under appropriate magnetic field parameters, the electromagnetic force could enhance the convection in the melt to promote the flow of the residual liquid phase, refine the microstructure, and optimize the feeding channel in the late solidification stage, which reduced the HTS of the alloy. However, when the magnetic field frequency was increased to 15 Hz, the induced current generated excessive Joule heat to the melt. At this time, the thermal action of the magnetic field coarsened the microstructure of the alloy, resulting in an increase in HTS of the alloy.

Free Surface Behavior Under Alternating and Static Magnetic Field

In order to reasonably control the free surface oscillations,by using GalnSn low-melting alloy,the fluctuation and distortion behaviour of metal free surface is investigated under AC magnetic field.By simultaneously superposing DC magnetic field,the damping effect of DC magnetic field on free surface fluctuation is also investigated.In the cylindrical pool,the azimuthal and radial oscillation mode can be found simultaneously due to AC magnetic field. Moreover,the free surface is more stable in square pool than that in the cylindrical pool.Increase coil AC current,the free surface fluctuation is aggravated.A series of surface waves can be observed on free surface with compound magnetic field.Reasonable DC magnetic field can effectively damp the oscillations on the free surface in cylindrical pool.However. the DC magnetic field cannot effectively damp the surface oscillations in square pool.The DC magnetic field has no significant damping effect on the oscillations induced by the lower frequency magnetic force.

Dynamical Suppression of Magnetic Tunneling

The effect of an alternating external magnetic field on spin tunneling is studied for a single axial magnetocrystalline anisotropy model. The model for spin half is solved and the result shows that an alternating field can suppress magnetic tunneling. The probability of tunneling for large spin is obtained with the help of quantum mechanical perturbation theory.

A MAGNETO-MECHANICAL FULLY COUPLED MODEL FOR GIANT MAGNETOSTRICTION IN HIGH TEMPERATURE SUPERCONDUCTOR

This paper presents a fully coupled model to account for the flux pinning induced giant magnetostriction in type-Ⅱ superconductors under alternating magnetic field The superconductor E-J constitutive law is characterized by power law where the critical current density is assumed to depend exponentially on the flux density. The governing equations of the two-field problem （i.e., the interactions of elastic and magnetic effects） are formulated in a two-dimensional model. The magnetostriction curves and magnetization loops are calculated over a wide range of parameters. The effects of applied magnetic field frequency f and amplitude B0 and critical current density on magnetostriction and magnetization are discussed. Results show that the critical current density of high temperature superconductor （HTS） YBCO has a significant effect on the magnetization and magnetostriction. The pinning-induced magnetostriction which has been observed in experiment can be qualitatively simulated by this model.

Nanomotor-based adsorbent for blood Lead(II)removal in vitro and in pig models

Blood lead(Pb(II))removal is very important but challenging.The main difficulty of blood Pb(II)removal currently lies in the fact that blood Pb(II)is mainly complexed with hemoglobin(Hb)inside the red blood cells(RBCs).Traditional blood Pb(II)removers are mostly passive particles that do not have the motion ability,thus the efficiency of the contact between the adsorbent and the Pb(II)-contaminated Hb is relatively low.Herein,a kind of magnetic nanomotor adsorbent with movement ability under alternating magnetic field based on Fe3O4 nanoparticle modified with meso-2,3-dimercaptosuccinic acid(DMSA)was prepared and a blood Pb(II)removal strategy was further proposed.During the removal process,the nanomotor adsorbent can enter the RBCs,then the contact probability between the nanomotor adsorbent and the Pb(II)-contaminated Hb can be increased by the active movement of nanomotor.Through the strong coordination of functional groups in DMSA,the nanomotor adsorbent can adsorb Pb(II),and finally be separated from blood by permanent magnetic field.The in vivo extracorporeal blood circulation experiment verifies the ability of the adsorbent to remove blood Pb(II)in pig models,which may provide innovative ideas for blood heavy metal removal in the future.