Regeneration of 2-amino-2-methyl-1-propanol used for carbon dioxide absorption

To improve the efficiency of the carbon dioxide cycling process and to reduce the regeneration energy consumption, a sterically hindered amine of 2-amino-2-methyl-1- propranol （AMP） was investigated to determine its regeneration behavior as a CO2 absorbent. The CO2 absorption and amine regeneration characteristics were experimentally examined under various operating conditions. The regeneration efficiency increased from 86.2% to 98.3% during the temperature range of 358 to 403 K. The most suitable regeneration temperature for AMP was 383 K, in this experiment condition, and the regeneration efficiency of absorption/regeneration runs descended from 98.3% to 94.0%. A number of heat-stable salts （HSS） could cause a reduction in CO2 absorption capacity and regeneration efficiency. The results indicated that aqueous AMP was easier to regenerate with less loss of absorption capacity than other amines, such as, monoethanolamine （MEA）, diethanolamine （DEA）, diethylenetriamine （DETA）, and N-methyldiethanolamine （MDEA）.

Simultaneous Determination of Dopamine and Uric Acid at 2-Amino-5-mercapto-[1, 3, 4]triazole Self-assembled Monolayers Gold Electrode

A newly synthesized reagent 2-amino-5-mercapto-[1, 3, 4]triazole (MATZ) has been usedto fabricate self-assembled monolayers (SAMs) on gold electrode for the first time. The SAMselectrode was characterized by electrochemical methods and scanning electronic microscopy (SEM),the SAMs electrode can be used to determinate dopamine (DA) and uric acid (UA) simultaneouslywith a detection limit of 8×10-7 mol/L for DA and 1×10-6 mol/L for UA respectively. The SAMscan also be used to detect the contents of DA and UA in synthetic urine sample with satisfactoryresults.

Photosynthesis and Molecular Structure of 2-Amino-3H-phenoxazin-3-one

The single crystal of the title compound (C12H8N2O2, Mr = 212.20) has been obtained by oxidation of 2-aminophenol in methanol solution with irradiation of sunlight. The crystal belongs to monoclinic space group P21/c with cell dimensions of a = 12.925(2), b = 5.077(3), c = 14.768(3)? b = 99.38(1), V = 956.2(5)?, Z = 4, Dc = 1.474 g/cm3, = 0.103 mm-1, R = 0.054, wR = 0.074 for 785 observed reflections (I > 2s(I)). The molecule consists of three coplanar rings. Much different CC distances (1.494(4)?and 1.343(6) ? observed within the quinoidal ring show the pattern of bond fixation expected for the Kekule formula.

Indirect Electrochemical Oxidation of 4-Amino-dimethyl-aniline Hydrochloride

The indirect dectrechemical oxidation of 4-amino-dimethyl-aniline hydrochloride containing wastewater generated from vanillin production is presented. Experiments were conducted at a constant current density of 30 rnA/cm^2 via a Ti/Bu-Ti-Sn ternary oxide coated anode and an undivided reactor. During the various stages of the electrolysis, parameters such as the values of chemical oxygen demand（COD） and total organic carbon（TOC） were determined in order to evaluate the feasibility of the electrochemical treatment. The energy consumption and the current efficiency during the electrolysis were calculated. The present study proves the effectiveness of the electrochemical treatment for wastewater resulted from vanillin production.

Synthesis of a New Porphyrin-fluorescein Hybrid and its Supramolecular Self-assembly with Amino-porphyrinatomanganese(Ⅲ) by Hydrogen-bonding

A new porphyrin-fluorescein hybrid 2 (Fl-PPTPP) has been synthesized and characterized by UV-Vis, IR, H-NMR, ESI-MS and elemental analysis. The supramolecular 1 self-assembly of Fl-PPTPP with amino-porphyrinatomanganese [Mn (p-APTPP)Cl] by hydrogen-bonding was studied using fluorescence spectroscopic titration and ESI-MS.

Preparation of Nano-SiO_2/Amino-modified Polysiloxane Hybrid Superhydrophobic Coating and Thermal-stability Characterization

We put forward a large-area and cost-effective method to fabricate superhydrophobic coating by introducing in-situ functionalized nano-SiO2 into side-amino modified hydroxy-terminated polydimethylsiloxane （SA-HTPDMS） curing system. With the characterization using water contact angle （WCA） tester, Fourier transform infrared spectroscopy （FTIR）, scanning electron microscope （SEM）, atomic force microscopy （AFM） and simultaneous thermal analysis, the as-prepared coating displayed a tremendous WCA of 154.8±1°, sliding angle （SA） about 3.5° and stable self-cleaning property range from -10 to 80 ℃. It was also found that the synergistic effect of surface micro-nano hierarchical structure and chemical hydrophobicity, stability from matrix had made contributions to the superhydrophobicity and excellent heat resistance up to 300 ℃.

Microwave-assisted reactions:Three-component process for the synthesis of 2-amino-2-chromenes under microwave heating

2-Amino-2-chromenes are class of heterocycles that posses considerable interest as pigments, cosmetics, potential agrochemicals and being the main constituents of many natural products. Although, they are generally prepared either under conventional heating, benign reagents or very recently, a three component condensation in polyethylene glycol-water in the presence of nanosized magnesium oxide, most of these methods require prolonged reaction time, reagents in stoichiometric amounts and generate moderate yields of products. Microwave technique performs a better yield in a short reaction time （85-94%; 5-8 min）. Also, three-component one step reaction is of great interest for cost savings from the point of raw materials, energy and time, A combination between both techniques will be attractive for researchers in that field.

Synthesis and Structural Characterization of a Tetranuclear Copper Complex with 2-Amino-1,3-thiazole

The title tetranuclear complex,（μ4-oxo）-hexakis（μ2-chloro）-tetrakis（2-amino-1,3-thiazole-N）-tetra-copper（ii） [Cu4（μ4-O）（μ-Cl）6L4]（1,L=2-amino-1,3-thiazole） was synthesized by the reaction of CuCl2·2H2O with 2-amino-1,3-thiazole in methanol and characterized by IR spectra and X-ray diffraction.Complex 1 crystallizes in triclinic,space group P1 with a=9.7137（2）,b=10.7005（2）,c=14.6505（2）,α=83.9550（10）,β=82.0930（10）,γ=67.1640（10）°,V=1387.84（4）3,Mr=883.43,Z=2,μ=3.927 mm-1,Dc=2.1144 g/cm3,F（000）=868,R=0.0332 and wR=0.0814.The complex contains a tetrahedron of four CuII atoms coordinating to a central μ4-O atom,with the six edges of the tetrahedron bridged by six Cl atoms.The Cu-O bond distances range from 1.910（2） to 1.918（2）,Cu-Cl from 2.3501（11） to 2.5924（10）,and Cu-Cu from 3.1003（6） to 3.1663（6）.The coordination geometries of the four coppers distort from trigonal bipramid to tetragonal pyramid with different distortion factors.The free animo groups of the ligands result in a lot of N-H···Cl and N-H···N intra-and intermolecular hydrogen bonds.

Theoretical Studies on Intermolecular Interactions of 4-Amino-5-nitro-1,2,3-triazole Dimers

Seven optimized configurations and their electronic structures of 4-amino-5-nitro- 1,2,3-triazole dimers on their potential energy surface have been obtained by using density functional theory （DPT） method at the B3LYP/6-311＋＋G＊＊ level. The maximum intermolecular interaction energy is -35.42 kJ/mol via the basis set superposition error-correction （BSSE） and zero point energy-correction （ZPE）. Charge transfers between the two subsystems are small. The vibration analysis of optimized configurations was performed, and the thermodynamic property changes from monomer to dimer have been obtained with the temperature ranging from 200 to 800 K on the basis of statistical thermodynamics. It is found that the hydrogen bonds contribute to the dimers dominantly, and the extent of intermolecular interaction is mainly determined by the hydrogen bonds＇ strength rather than their number. The dimerization processes of Ⅳ, Ⅴand Ⅵ can occur spontaneously at 200 K.

Determination of inter- and intra-subtype/species varia-tions in polymerase acidic protein from influenza A virus using amino-acid pair predictability

The polymerase acidic protein is an important family of proteins from influenza A virus, which is classified as many different subtypes or spe-cies. Thus, an important question is if these classifications are numerically distinguishable with respect to the polymerase acidic protein. The amino-acid pair predictability was used to transfer 2432 polymerase acidic proteins into 2432 scalar data. The one-way ANOVA found these polymerase acidic proteins distinguish-able in terms of subtypes and species. However, the large residuals in ANOVA suggested a pos-sible large intra-subtype/species variation. Therefore, the inter- and intra-subtype/species variations were studied using the model II ANOVA. The results showed that the in-tra-subtype/species variations accounted most of variation, which was 100% in total for both inter- and intra- subtype/species variations. Our analysis threw lights on the issue of how to de-termine a wide variety of patterns of antigenic variation across space and time, and within and between subtypes as well as hosts.

Microwave promoted one-pot synthesis of 3-(2′-amino-3′-cyano-4′-arylpyrid-6′-yl)coumarins

A facile procedure for the synthesis of 3-（2′-amino-3′-cyano-4′-arylpyrid-6′-yl） coumarins are being reported starting from 3- acetylcoumarin, aromatic aldehydes and malononitrile. The reactions were carried out on microwave irradiation in good yield with short time and easy work-up. The structures of all the compounds have been confirmed on the basis of their analytical, IR, ^1H NMR, and mass spectral data.

Preparation and Application of the Hydrophilic Amino-Silicone Softener by Emulsion Polymerization

The amino poly-siloxane was modified with self-made polyether silicones by the crafts of emulsion polymerization. We studied the emulsifier, the dosage of emulsifier initiator, polyether/silane coupling agent, pH value. There are some results of the research indicated in the following. First, there are many factors for the hydrophilic amino-silicone softener both on the polymerization process and the performance, such as the proportion and amount of emulsifier, initiator dosage, the mass ratio of the polyether and hydrogen silicone oil, the choice of silicone coupling agent, and the ratio and dosage of polyether silicones silane coupling agent. Second, the amount of hydrogen of the hydrogen silicones and the choice of catalyst are the key points on the synthesis of polyether silicones. The amount of hydrogen should be low and the catalyst must be economical and efficient and its introduction should be small and times, other more the holding time is not too long. The next one is that, in the process of hydrolysis of silane coupling agent, we need some acid to adjust pH value, or they will be broken down. The most important one but not the last is that the epoxy group can improve the products low-temperature supple and the persistence of the finishing fabric, furthermore it can reduce yellowing and has a good stability of the inorganic salt, however, it will be destroyed if the reaction temperature for epoxy is too high. What’s more, it is very economical and environmental that the process of emulsion is simple and with less emulsifier.

Alpha-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid receptor antagonist inhibits apoptosis of retinal ganglion cells in a rabbit model of optic nerve injury

A rabbit model of traumatic optic nerve injury, established by occlusion of the optic nerve using a vascular clamp, was used to investigate the effects of alpha-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid receptor antagonist GYKI 52466 on apoptosis of retinal ganglion cells following nerve injury. Hematoxylin-eosin staining and a terminal deoxynucleotidyl transferase dUTP nick end labeling assay showed that retinal ganglion cells gradually decreased with increasing time of optic nerve injury, while GYKI 52466 could inhibit this process. The results demonstrate that following acute optic nerve injury, apoptosis of retinal ganglion cells is a programmed process, which can be inhibited by the alpha-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid receptor antagonist.

An Efficient and Rapid Synthesis of 2-amino-4-arylthiazoles Employing Microwave Irradiation in Water

A facile, high yielding green chemical synthetic protocol adaptable to the parallel synthesis of a library of potentially bioactive 2-amino-4-arylthiazoles is reported herein. The methodology involves the condensation of various aracyl bromides with N-arylthioureas under MWI using water as solvent, to yield pure products (81%-97%) in very short reaction times (1-20 min).

Synthesis and antiangiogenic activities of 5-amino-1,3-dihydro-1,3-dioxo-2H-isoindole-2-propanoic acid derivatives

Based on the structure-activity relationships and antiangiogenic mechanism of RGD-containing peptides, a series of 5-amino- 1,3-dihydro-1,3-dioxo-2H-isoindole derivatives were synthesized. The structures were characterized by ^1H NMR, MS and elementary analysis. There ability to inhibit angiogenesis were evaluated by chick embryo chorioallantoic membrane assay at 10^-5 mol/L. Compounds 7a and 7b displayed obvious antiangiogenic activity.

Synthesis,Crystal Structure and Plant Growth Regulatory Activity of 1-(3-Amino-[1,2,4]triazol-1-yl)-3,3-dimethyl-butan-2-one

The title compound 1-（3-amino-[1,2,4]triazol-1-yl）-3,3-dimethyl-butan-2-one（3） was synthesized by Hofmann-alkylation reaction of 1-chloro-3,3-dimethyl-butan-2-one（1） and ~1H-[1,2,4]triazol-3-ylamine（2） with equal amount of K_2CO_3 as acid acceptor. The structure of compound 3 was characterized by ~1H NMR, 13 C NMR, HRMS and single-crystal X-ray diffraction. The compound crystallizes in the monoclinic system, space group P21/n with a = 5.7227（8）, b = 27.924（4）, c = 6.2282（7） ？, β = 101.892（11）°, V = 973.9（2） ？~3, Z = 4, T = 180.00（10） K, μ（MoKα） = 0.087 mm^（-1）, Dc = 1.243 g/cm^3, 3832 reflections measured（3.648≤θ≤26.022°）, 1916 unique reflections（Rint = 0.0359, Rsigma = 0.0572） used in all calculations. The final R = 0.0557（I 〉 2σ（I）） and w R = 0.1276（all data）. Bioassay showed that 3 displayed excellent activity as plant growth regulator with inducing lateral root formation and enhancing primary root elongation at 0.27 mmol/L（50 ppm） in soybeen（He Feng-50）. Good water solubility was found with 50 mg in 1 m L of water. Therefore, application of 3 in agriculture is more environmentally friendly due to cosolvent-free condition, and results in improved abiotic-stress tolerance by affecting the root growth. And furthermore, it can be used as a precursor to investigate the function of regulating plant root growth.

豹皮菌中2-Amino-3-(1,2-dicarboxyethylthio)propanoic acid非对映异构体的绝对构型

豹皮菌中２Ａｍｉｎｏ３（１，２ｄｉｃａｒｂｏｘｙｅｔｈｙｌｔｈｉｏ）ｐｒｏｐａｎｏｉｃａｃｉｄ非对映异构体的绝对构型顾谦群伏谷真二野副重男（青岛海洋大学海洋药物与食品研究所，青岛２６６００３；东北大学药学部，日本仙台）豹皮菌（Ａｍａｎｉ...

Synthesis,Crystal Structure and Fluorescence Property of N-n-butyl-4-[di(bromoethyl)]amino-1,8-naphthalimide

The halogen as a kind of alkylating reagent is used to introduce new group to realize the fluorescence sensors efficient of metal ion detection. The substituent at C-4 position was double bromine, which defined that the halogen as an alkylating reagent should be further researched and detected for Hg2＋. Therefore, the N-n-butyl-4-[di（bromoethyl）]amino-1,8-naphthalimide has been synthesized to detect some metal ions. The title compound has been prepared via substitute reaction and was characterized by IR, 1H NMR, 13 C NMR, and MS. It crystallizes in triclinic, space group P1 with a = 9.0071（18）, b = 9.804（2）, c = 13.073（3）A, α = 73.17（3）, β = 71.73（3）, γ = 62.95（3）°, Z = 2, V = 961.5（3） A3, Dc = 1.666 g/cm3, F（000） = 484, μ（Mo Kα） = 4.232 mm-1, R = 0.0429 and w R = 0.1004. The presence of intermolecular hydrogen bonds as well as π-π stacking interaction led to the stability of the compound. The fluorescence intensity was obviously lower than that of other ions when Hg2＋ was added with the concentration of 1 × 10^-5 mol·L-1.

OPTICALLY ACTIVE AMINO ACIDS WITH HIGHLY BRANCHED SIDE CHAIN (I) SYNTHESIS OF D- AND L- 2-AMINO-5,5-DIMETHYLHEXANOIC ACID AND 2-AMINO-6,6-DIMETHYLHEPTANOIC ACID

The title compounds were prepared by the enzymatic resolution of the corresponding N-acetylated DL-amino acids methyl esters, which were obtained from t-butyl chloride via an 8-step synthesis.