Effect of sequential nursing care combined with communication intervention on visual recovery and pain after cataract ultrasound emulsification

BACKGROUND Cataracts are a common ophthalmic disease and postoperative vision recovery is crucial to patient quality of life.Rational and efficient care models play an impor-tant role in promoting vision recovery.AIM To evaluate the clinical effectiveness of procedural nursing care combined with communication intervention in vision recovery after cataract ultrasound emulsi-fication.METHODS A randomized controlled study was conducted on 100 patients with cataracts who underwent ultrasound emulsification surgery.They were randomly assigned to an experimental group or a control group.The experimental group received procedural nursing combined with Connect,Introduce,Communicate,Ask,Respond,Exit(CICARE)communication intervention,whereas the control group received conventional nursing.The effectiveness of the nursing model was assessed by comparing differences in vision recovery,pain scores,and mental health status between the two groups.RESULTS It was found that over time the visual acuity of patients in both groups gradually recovered and patients in the experimental group had lower pain scores and superior mental health status than the control group(P<0.05).CONCLUSION Procedural nursing combined with CICARE communication intervention has positive effects on vision recovery in patients after cataract ultrasound emulsification.

Analysis of Ultrasonic Emulsification Surgery and Small Incision Cataract Extracapsular Extraction Surgery for Cataract Clinical Treatment Level Improvement

Objective:To analyze the efficacy of ultrasonic emulsification and small incision cataract extracapsular extraction in cataract patients.Methods:96 cataract patients admitted from May 2021 to May 2023 were selected and randomly grouped into group A(ultrasonic emulsification)and group B(small-incision extracapsular cataract extraction),with 48 cases each.Results:At 1 week,1-month,and 3 months post-operation,the visual acuity of group A was higher and the astigmatism value was lower than that of group B(P<0.05);at 12h,24h,and 48h post-operation,the intraocular pressure of group A was higher than that of group B(P<0.05);the thickness of macular area of group A was lower than that of group B at 1 week and 1-month post-operation(P<0.05).Conclusion:Ultrasonic emulsification in cataract patients was slightly better than small incision cataract extracapsular extraction in correcting astigmatism,improving visual acuity,and regulating macular thickness.However,due to the high energy of ultrasonic emulsification,the risk of complications such as high postoperative intraocular pressure was higher.Small-incision extracapsular cataract extraction has better application value in economically disadvantaged areas.

Clinical Application of Cataract Ultrasonic Emulsification Combined with Atrial Angle Segmentation in the Treatment of Primary Angle-Closure Glaucoma

Objective:To evaluate the therapeutic effect of cataract ultrasonic emulsification(PE)combined with atrial angle separation(CSS)for primary angle-closure glaucoma(PACG).Methods:78 patients with PACG admitted to the hospital between October 2021 and October 2023 were selected and grouped by randomized numerical table;39 cases were counted in the observation group and selected PE combined with CSS surgery;39 cases were counted in the reference group and selected PE combined with trabeculectomy and the total effective rate,the state of the atrial angle,the clinical indexes,the degree of ocular symptoms,and the complication rate were compared.Results:The total effective rate of the observation group was higher than that of the reference group,and the percentage of the wide atrial angle of the atrial angle status was higher than that of the reference group;3 months after the operation,the logarithm of the minimum angle of resolution(Log MAR)and intraocular pressure of the observation group was lower than that of the reference group,and the central anterior chamber depth(ACD)was greater than that of the reference group;the scores of the degree of ocular symptoms of the observation group were lower than that of the reference group,and the rate of complication was lower than that of the reference group(P<0.05).Conclusion:PE combined with CSS surgical treatment for PACG patients can improve the efficacy of treatment,improve the state of the patients’atrial angles,and restore the ocular function indexes.It can alleviate the ocular symptoms as soon as possible and has a high surgical safety.

Synergistic anionic/zwitterionic mixed surfactant system with high emulsification efficiency for enhanced oil recovery in low permeability reservoirs

Emulsification is one of the important mechanisms of surfactant flooding. To improve oil recovery for low permeability reservoirs, a highly efficient emulsification oil flooding system consisting of anionic surfactant sodium alkyl glucosyl hydroxypropyl sulfonate(APGSHS) and zwitterionic surfactant octadecyl betaine(BS-18) is proposed. The performance of APGSHS/BS-18 mixed surfactant system was evaluated in terms of interfacial tension, emulsification capability, emulsion size and distribution, wettability alteration, temperature-resistance and salt-resistance. The emulsification speed was used to evaluate the emulsification ability of surfactant systems, and the results show that mixed surfactant systems can completely emulsify the crude oil into emulsions droplets even under low energy conditions. Meanwhile,the system exhibits good temperature and salt resistance. Finally, the best oil recovery of 25.45% is achieved for low permeability core by the mixed surfactant system with a total concentration of 0.3 wt%while the molar ratio of APGSHS:BS-18 is 4:6. The current study indicates that the anionic/zwitterionic mixed surfactant system can improve the oil flooding efficiency and is potential candidate for application in low permeability reservoirs.

Molecular design and applications of a nanostructure green Tripodal surface active ionic liquid in enhanced oil recovery: Interfacial tension reduction, wettability alteration, and emulsification

Surface active ionic liquids (SAILs) are considered as prominent materials in enhanced oil recovery thanks to their high interfacial activity. This study reports the preparation and applications of a nanostructure Tripodal imidazolium SAIL as an environmentally-friendly substitute to the conventional surfactants. The product has a star-like molecular structure centered by a triazine spacer, namely [(C_(4)im)_(3)TA][Cl_(3)], prepared by a one-step synthesis method and characterized with FT-IR, NMR, XRD, and SEM analysis methods. The interfacial tension of the system was decreased to about 78% at critical micelle concentration of less than 0.08 mol·dm^(−3). Increasing temperature, from 298.2 to 323.2 K, improved this capability. The solid surface wettability was changed from oil-wet to water-wet and 80% and 77% stable emulsions of crude oil–aqueous solutions were created after one day and one week, respectively. Compared to the Gemini kind homologous SAILs, the superior effects of the Tripodal SAIL were revealed and attributed to the strong hydrophobic branches in the molecule. The Frumkin adsorption isotherm precisely reproduced the generated IFT data, and accordingly, the adsorption and thermodynamic parameters were determined.

PROGRESS IN PHASE INVERSION EMULSIFICATION FOR EPOXY RESIN WATERBORNE DISPERSIONS

In this review, our recent work in phase inversion emulsification （PIE） for polymer （especially epoxy resin） waterborne dispersions is summarized. Based on experimental results about PIE process, the physical model is proposed which can guide the synthesis of the waterborne dispersions such as polymer/nanoparticle composite dispersion. In the presence of a latent curing catalyst, PIE can give a crosslinkable epoxy resin waterborne dispersion. The dispersions can form cured transparent coatings with some unique properties such as UV shielding. They are promising in functional coatings, waterborne resin matrices for composites, and sizing for high performance fibers.

Preparation of Monodispersed O/W Emulsion by Ceramic External Membrane Emulsification System——Preliminary Study on Integrated Ceramic Membrane Emulsification Reactor

A new reactor with integrated conventional slurry stirred reactor and ceramic external membrane emulsification system, was introduced in this paper. Toluene and toluene containing surfactant was separately used as dispersed phase for preparation of emulsions. Two kinds of emulsions were prepared and compared. The volume average sizes of prepared emulsions were 3.53μm and 3.6μm respectively. The results showed that the droplet sizes of two kinds of emulsions were similar, but the monodispersed emulsion was only obtained with addition of surfactant into the dispersed phase.

A Mutant Strain of a Surfactant-Producing Bacterium with Increased Emulsification Activity

As reported in this paper, a strain of oil-degrading bacterium Sp - 5 - 3 was determined to belong to Enterobacteriaceae, which would be useful for microbial enhanced oil recovery (MEOR). The aim of our study was to generate a mutant using low energy N+ beam implantation. With 10 keV of energy and 5.2× 1014 N+/cm2 of dose - the optimum condition, a mutant, S-34, was obtained, which had nearly a 5-fold higher surface and a 13-fold higher of emulsifica-tion activity than the wild type. The surface activity was measured by two methods, namely, a surface tension measuring instrument and a recording of the repulsive circle of the oil film; the emulsification activity was scaled through measuring the separating time of the oil-fermentation mixture. The metabolic acid was determined as methane by means of gas chromatography.

MEMBRANE EMULSIFICATION SYSTEMS

Microcapsules (or microspheres) with small size and narrow size distribution have potential applications as carriers of proteins and polypeptides. However the conventional preparation methods severely limit their real applications. Membrane emulsification technology may become a new preparation method of microcapsules with monodisperse droplets, mild conditions, good stability, low energy consumption and easy to realize mass production. In this paper, studies on membrane emulsification systems and the possible existing problems are summarized, and primary attempts on preparing alginate/chitosan microcapsules are conducted.

Preparation of Macroporous TiO2 Ceramic Based on Membrane Jet-flow Emulsification

A novel method to prepare macroporous TiO2 ceramic, based on membrane emulsification was reported.To solve the paradox between the instability of nonaqueous emulsion and long emulsification time required by themembrane emulsification, a two-stage ceramic membrane jet-flow emulsification .was. proposed. Discussion wasconducted on the evolution of droplet size with time, which followed the Ostwalcl npemng theory. And a monodispersed nonaqueous emulsion with an average droplet size of 1.6μm could beprepared. Using the emulsion, as atemplate, TiO2 ceramics with an average pore size ot 1.1 μm were obtaineed. Tne material could be prospectivelyused for preparation of catalysts, adsorbents, and membranes.

New insights into the mechanism of surfactant enhanced oil recovery:Micellar solubilization and in-situ emulsification

Reducing the oil-water interfacial tension(IFT)to ultra-low is believed the primary mechanism for surfactant-based enhanced oil recovery(EOR)process.However,field trials have shown that low concentration surfactant flooding can also improve oil recovery without ultra-low IFT.To clarify the mechanism behind,the currently-used surfactant,naphthenic arylsulfonate(NAS),was used to unravel its function during surfactant flooding from the horizon of micron-and nano-scale.The solubilization capacity of NAS micelle to petroleum fractions was evaluated through light absorbance strategy,smallangle neutron scattering,dynamic light scattering and transmission electron microscopy.It was found that micellar solubilization plays a significant role during the surfactant flooding.In-situ emulsification was visualized in microfluidics with three types of microchips,respectively.A series of displacement tests were carried out with NAS solution pumping into oil-saturated chip.The results show that in-situ emulsification improve oil recovery mainly through blocking and entrainment effects.Results from this work aid in understanding the interaction between surfactant solution and petroleum fractions at low surfactant concentration,which is helpful for design surfactant-based displacing system for EOR process.

Preparation and Application of the Hydrophilic Amino-Silicone Softener by Emulsion Polymerization

The amino poly-siloxane was modified with self-made polyether silicones by the crafts of emulsion polymerization. We studied the emulsifier, the dosage of emulsifier initiator, polyether/silane coupling agent, pH value. There are some results of the research indicated in the following. First, there are many factors for the hydrophilic amino-silicone softener both on the polymerization process and the performance, such as the proportion and amount of emulsifier, initiator dosage, the mass ratio of the polyether and hydrogen silicone oil, the choice of silicone coupling agent, and the ratio and dosage of polyether silicones silane coupling agent. Second, the amount of hydrogen of the hydrogen silicones and the choice of catalyst are the key points on the synthesis of polyether silicones. The amount of hydrogen should be low and the catalyst must be economical and efficient and its introduction should be small and times, other more the holding time is not too long. The next one is that, in the process of hydrolysis of silane coupling agent, we need some acid to adjust pH value, or they will be broken down. The most important one but not the last is that the epoxy group can improve the products low-temperature supple and the persistence of the finishing fabric, furthermore it can reduce yellowing and has a good stability of the inorganic salt, however, it will be destroyed if the reaction temperature for epoxy is too high. What’s more, it is very economical and environmental that the process of emulsion is simple and with less emulsifier.

Influence of Emulsification of Composite Collector on Rutile Flotation

The emulsifiable conditions of composite collector(FP-2)inindustry are systematically re- searched in the paper. It is foundthat types of the emulsifiers, emulsification temperature, the mixedproportion of FP-2 to emulsifier are the important parametersaffecting emulsification effect rutile flotation targets. When Theproportion of FP-2 to emulsifier(E-4)is 100, by means ofemulsification of mechanical stirring, the rutile Flotation recoveryis 85.6/100 and the grade is 75.3/100, which approach the flotationtargets of FP-2 used as col- Lector by ultrasonic emulsificationunit.

Effect of Continuous Phase Viscosity on Membrane Emulsification

Oil-in-water(o/w) emulsions were produced with a membrane emulsification system. The effect of the continuous phase viscosity on the emulsification was studied. The theoretical analyses show that the continuous phase viscosity influences not only the flow field of the continuous phase but also the interfacial tension. The droplet size distribution and disperse phase flux for different continuous phase viscosity were investigated experimentally at constant wall shear stress and constant volume flow rate of the continuous phase respectively.

Measurement of Viscosity Alteration for Emulsion and Numerical Simulation on Bitumen Production by SAGD Considering In-situ Emulsification

A thermal steam stimulation process, such as steam-assisted gravity drainage （SAGD）, induces water-in-oil emulsion of heavy oil or bitumen throughout the production. The present study investigated the effects of in-situ emulsification in the oil sands reservoir for SAGD process. The viscosities of water-in-oil emulsions produced were measured with respect to water-oil ratio （W/O）, shear rates, pressures and temperatures. The results therefore were employed to develop the numerical model of viscosity alteration. Numerical simulations of the SAGD bitumen production considering viscosity alteration were also carried out to investigate distribution characteristics of emulsion, water, and bitumen at steam chamber boundary and effects of in-situ emulsification on bitumen production behavior. With a model named SAGD-Emulsion Model, it was found that the net recovery factor of bitumen for this model is 5 to 10% higher than that of conventional SAGD simulation. Ultimately, it was found that the recovery factor of bitumen increased with W/O of emulsion generated in the reservoir since higher water content would invariably allow bitumen to flow at higher relative permeability, while the increase in viscosity merely delayed bitumen production.

Analysis of the causative factors related to earlier emulsification of silicone oil

The aim of this study is to report and analyze the factors related with earlier occurrence of silicone oil(SO) emulsification in patients underwent pars plana vitrectomy and SO injection in our hospital. We retrospectively reviewed consecutive case series undergone both SO injection and removal in our hospital, and 182 ones were eligible. Possible related independent factors included: macula status(on/off), concomitant phacoemulsification with the surgery of SO tamponading, concomitant status of proliferative vitreoretinopathy, combined surgery of retinotomy, time to have emulsification(<6 mo/≥6 mo after primary SO injection), route of SO injection(anterior/posterior), lens status(aphakic/pseudophakic/phakic), anesthesia(local/general), brands and type of SO, with/without episcleral cryotherapy, with/without hypertension, with/without diabetes, with/without intraoperative use of triamcinolone acetonide. The study revealed that brand and type of SO was the significant factor related with earlier emulsification of SO. Further study was warranted to find out the underlying causes.

Analysis of the rates of emulsification in intraocular silicone oil tamponades of differing viscosities

AIM:To investigate the rates of emulsification in silicone oil(SO)tamponades of differing viscosities used during pars plana vitrectomy(PPV)in the treatment of complicated vitreoretinal diseases.METHODS:This study was a prospective randomized clinical trial.Totally 290 cases with greater likelihoods of secondary detachment were included and randomly grouped into either Siluron 2000(n=143)or Siluron 5000(n=147)SO tamponades with 23-gauge PPV.Patient followups and data analyses were conducted 1,3,6,and 12 mo post-surgery.RESULTS:The time of the SO emulsification ranged from 1 to 17 mo,with a mean of 7.3±4.2 mo.The Siluron 5000 group showed a slower emulsification rate in comparison to the Siluron 2000 group.The Siluron 2000 group took a shorter time to show signs of emulsification,necessitating earlier SO removal.However,there were no significant differences in the occurrence of complications,including secondary retinal detachment,cataract,corneal abnormality,high intraocular pressure and hypotony.CONCLUSION:The Siluron 2000 SO tamponade shows a faster rate of emulsification than the Siluron 5000 SO,necessitating earlier removal.Both groups show similar results in terms of anatomical success and visual acuity outcome,and there is no significant difference between the SOs regarding the occurrence of complications.

HYDRODYNAMIC AND THERMODYNAMIC EFFECTS IN PHASE INVERSION EMULSIFICATION PROCESS OF EPOXY RESIN IN WATER

The mechanism of phase inversion emulsification process （PIE） was studied for waterborne dispersion of highly viscous epoxy resin using non-ionic polymeric surfactants. Drop deformation and breakup, rheological properties, conductivity, and particle size measurements reveal the micro-structural transition amid emulsification. It is revealed that strong flow causes water drop to burst with the formation of droplets and huge interface. Phase inversion corresponds to an abrupt rheological transition from a type of viscous melt with weak elasticity to a highly elastic type of aqueous gel. This implies that the phase inversion equivalent to a curvature inversion. Based on this, a geometric model is postulated to correlate process variables to the particle size. The coverage and conformation of the surfactant plays key role for the particle size of the final emulsion. The interactions of thermodynamic and hydrodynamic effects are also discussed. It is concluded that the thermodynamics control the PIE while the hydrodynamics drives the creation of interface and involves every step of PIE.

PREPARATION OF BISPHENOL A EPOXY RESIN WATERBORNE DISPERSIONS BY THE PHASE INVERSION EMULSIFICATION TECHNIQUE

The phase inversion emulsification technique (PIET) is an effective physical method for preparing waterborne dispersions of polymer resins. Some results concerning the preparation of bisphenol A epoxy resin waterborne dispersions by PIET in our laboratory were summarized. Electrical properties, rheological behavior and morphological evolution during phase inversion progress were systematically characterized. The effects of the emulsifier concentration and emulsification temperature on phase inversion progress and the structural features of the waterborne particles were studied as well. The deformation and break up of water drops in a shear field were analyzed in terms of micro-theology, while the interaction and coalescence dynamics of water drops were discussed in terms of DLVO theory and Smoluchowski effective collision theory, respectively. Based on the experimental results and theoretical analysis, a physical model of phase inversion progress was suggested, by which the effects of the parameters on phase inversion progress and the structural features of the waterborne particles were interpreted and predicted.

Impact of emulsification of crude oil on normalized radar cross section

The emulsification of crude oil is caused by the oil flowing into the water,resulting in the increase of oil film tension,viscosity,water content,and volume,which brings great harm to the marine ecological environment and difficulties for the cleanup of marine emergency equipment.The realization observation of emulsification crude oil will increase the response speed of marine emergency response.Therefore,we set up crude oil emulsification samples to study the physical property in laboratory and conducted radar measurements at different incidence angles in outdoor.The radar is C band in resolution of 0.7 m by 0.7 m.A fully polarimetric scatterometer(HH,VV,and VH/HV)is mounted at 1.66 m(minimum altitude)height at an incidence angle between 35°and 60°.An asphalt content of less than 3%crude oil and the filtered seawater were used to the outdoor emulsification scattering experiment.The measurement results are as follows.The water content can be used to describe the process of emulsification and it is easy to measure.Wind speed,asphalt content,seawater temperature,and photo-oxidation affect the emulsifying process of crude oil,and affects the normalized radar cross section(NRCS)of oil film but wind is not the dominant factor.It is the first time to find that the emulsification of crude oil results in an increase of NRCS.