Effect of Ni on glass-forming ability of Cu-Ti-based amorphous alloys

Ribbons of amorphous Cu-Ti-Ni alloys were prepared by the melt spinning method. The amorphous structure of these ribbons was confirmed by X-ray diffractametry and transmission electron microscopy. The effect of Ni on the glass-forming ability of Cu-Ti-based alloys was studied by differential scanning calorimetry(DSC). It is found that the supercooled liquid region, ?Tx value shows the maximum value of 61℃ at x=10 in the Cu50Ti50?xNix (x=0, 5, 10, 15 mole fraction, %) system. And the reduced glass transition temperature, Trg, is smaller than 0.45. The glass forming ability(GFA) of Cu-Ti alloy is not effectively promoted by Ni addition.

Influence of flux treatment on the glass forming ability of Pd-Si binary alloys

Pd81Si19 amorphous alloys were prepared by combination methods of melt spinning and B2O3 flux treatment. A compari- son between the ribbons prepared from the fluxed ingots and the non-fluxed ones has been carried out. The result reveals that after fluxing treatment the glass transition temperature of the as-prepared glassy ribbons is reduced while the initial crystallization tem- perature is enhanced. It results in that the supercooled liquid region (defined as the difference between the initial crystallization tem- perature and the glass transition temperature) of the glassy alloy treated with fluxing technology has been increased from 31 to 42 K. This shows that fluxing technique can enhance the glass forming ability (GFA) of the binary alloy and improve the thermal stability of supercooled liquid of the glassy alloy.

Effect of Co substitution on the glass forming ability and magnetocaloric effect of Fe88Zr8B4 amorphous alloys

As greater attention is paid to energy consumption and global warming,magnetic refrigeration(MR)technologies based on the magneto-caloric effect(MCE)have been developed.Systems based on MR are expected to be more compact。

Effect of Rare Earth and Transition Metal Elements on the Glass Forming Ability of Mechanical Alloyed Al–TM–RE Based Amorphous Alloys

The present work aims to compare the amorphous phase forming ability of ternary and quaternary Al based alloys （Al86Ni8Y6, Al86GNi6Y6Co2, Al86NigLa6 and Al86Ni8Y45La15） synthesized via mechanical alloying by varying the composition, i.e. fully or partially replacing rare earth （RE） and transition metal （TM） elements based on similar atomic radii and coordination number. X-ray diffraction and high resolution transmission electron microscopy study revealed that the amorphization process occurred through formation of various intermetallic phases and nanocrystalline FCC Al. Fully amorphous phase was obtained for the alloys not containing lanthanum, whereas the other alloys containing La showed partial amorphization with reappearance of intermetallic phases attributed to mechanical crystallization. Differential scanning calorimetry study confirmed better thermal stability with wider transformation temperature for the alloys without La.

Effect of Ni substitution on the formability and magnetic properties of Gd50Co50 amorphous alloy

A small amount of Ni was added into the binary Gd50Co50 amorphous alloy to replace Gd in order to obtain ternary Co50Gd50-xNx(x=1,2,and 3)amorphous alloys.Compared to the binary Gd50Co50 amorphous alloy,the Co50Gd50-xNx amorphous alloys show an enhanced Curie temperature(TC)with a weakened formability.The maximum magnetic entropy change(-Δ^Smpeak)of the Co50Gd50-xNx amorphous alloys is found to decrease with the increasing TC.The adiabatic temperature rise(ΔTad)of the Co50Gd47Ni3 amorphous alloy is superior to that of the Fe-based metallic glasses at room temperature.The variation of the TC and-Δ^Smpeak of the Gd50Co50 amorphous alloy with Ni addition,and the mechanism involved,were discussed.

Improvement of corrosion resistance in NaOH solution and glass forming ability of as-cast Mg-based bulk metallic glasses by microalloying

The influences of the addition of Ag on the glass forming ability (GFA) and corrosion behavior were investigated in the Mg-Ni-based alloy system by X-ray diffraction (XRD) and electrochemical polarization in 0.1 mol/L NaOH solution.Results shows that the GFA of the Mg-Ni-based BMGs can be improved dramatically by the addition of an appropriate amount of Ag;and the addition element Ag can improve the corrosion resistance of Mg-Ni-based bulk metallic glass.The large difference in atomic size and large negative mixing enthalpy in alloy system can contribute to the high GFA.The addition element Ag improves the forming speed and the stability of the passive film,which is helpful to decrease the passivation current density and to improve the corrosion resistance of Mg-Ni-based bulk metallic glass.

Effect of Pd on GFA and Thermal Stability of Zr-based Bulk Amorphous Alloy

The effect of Pd addition on the glass-forming ability and thermal stability of the Zr55Al10Cu30Ni5-xPdx (x=0, 1, 3, 5 at. pct) alloys upon copper-mold casting has been investigated. The structure, thermal stability and microstructure were studied by X-ray diffraction (XRD), differential scanning calorimetry (DSC) and transmission electron microscopy (TEM), respectively. It was identified that a new bulk amorphous alloy with the larger supercooled liquid region Tx of 100 K is obtained with substituting Ni by 1 at. pct Pd. Furthermore, the origins that thermal stability and GFA change with increasing of Pd have also beer discussed.

Fragility and glass forming ability of Al-Ni-Ce alloy melts

The fragility of Al Ni Ce alloy melts with three kinds of different compositions, Al85Ni10Ce5, Al85Ni8Ce7, Al85Ni5Ce10(mole fraction, %), was studied using oscillating vessel viscometer and differential scanning calorimetry. Their fragility parameters obtained from experiments and theoretic calculation are: 238, 228 and 335 respectively. The results indicate that these three kinds of Al Ni Ce alloy melts are very fragile liquids, which kinetically show strong non Arrhenius behaviour in the Angell plot, so they have poor glass forming ability (GFA). The alloy melt Al85Ni5Ce10 has the largest fragility parameter among the three alloy melts. In the preparation of rapidly quenched amorphous ribbons, Al85Ni10Ce5 and Al85Ni8Ce7 can gain amorphous ribbons when the rotate speed of the roller reaches 800 r/min, while for Al85Ni5Ce10 it must exceed 1 000 r/min.

Influence of B,Al and Nb addition on the glass forming ability and stability of mechanically alloyed Zr-Ni amorphous alloys

We investigated the influence of minor additions of B,Al and Nb that have representative atomic sizes on the glass forming ability (GFA) and stability of Zr-Ni amorphous alloys during mechanical alloying. The results show that the minor addition of B,Al or Nb does not shorten the initial time of the full amorphization reaction or improve the glass forming ability of the Zr-Ni alloys at a low rotation speed. However,B addition can effectively improve the mechanical stability of the amorphous phase against mechanically induced crystallization. Furthermore,the amorphous phase gradually transforms into a metastable fcc-phase with increasing milling time. The addition of Al and Nb that have similar atomic sizes has a similar effect on the GFA and the mechani-cal stability of the Zr-Ni amorphous phase. Moreover,Al and Nb addition can alter the crystallization behavior and improve the thermal stability of the Zr-Ni amorphous phase.

Formation and properties of high Fe-content Fe-(B-Si)-Zr bulk amorphous alloys

The present work is devoted to the development of Fe-（B-Si）-Zr amorphous alloys with high glass-forming ability and good magnetic properties. Using the cluster-plus-glue-atom model proposed for ideal amorphous structures, [FeFe11B3Si]（Fe1-xZrx） was determined as the cluster formula of Fe-（B-Si）-Zr alloys. The glass formation and thermal stability of the serial alloys, namely, [FeFel^B3Si]（Fel_xZrx） （x = 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.75, and 1.0）, were studied by the combination of copper mold casting, X-ray diffraction, and differential thermal analysis techniques. The maxima of glass-forming ability and thermal stability were found to occur at the compositions of [FeFe11B3Si] （Fe0.6Zr0.4） and [FeFe11B3Si]（Fe0.5Zr0.5）. The alloys can be cast into amorphous rods with 1.5 ram diameter, and upon reheating, the amorphous alloys exhibit a large undercooled liquid span of 37 K. The saturation magnetization of the [FeFe11B3Si]（Fe0.5Zr0.5） amorphous alloy was measured to be 1.4 T.

Formation and crystallization of bulk Pd_(82)Si_(18) amorphous alloys

Bulk amorphous Pd 82 Si 18 alloy with the largest diameter of 8 mm was prepared by water quenching the molten alloy with flux medium in a quartz tube. The calculation result indicates that the bulk Pd 82 Si 18 amorphous alloys have a low critical cooling rate ( R c) of 4.589 K/s or less. The experimental results show that purifying melt may improve glass forming ability(GFA) of undercooled melt, while liquid phase separation (LPS) of undercooled melt will decrease its GFA. There are some differences in crystallization experiments between bulk metallic glass and amorphous ribbons of Pd 82 Si 18 alloys. These include the numbers of exothermic peak, glass transition temperature T g, crystallization temperature T x, region of undercooling liquid (Δ T=T x- T g) respectively. The links of cooling rates of melt and crystallization of Pd 82 Si 18 amorphous alloys are explored.

Glass-forming ability and corrosion performance of Mn-doped Mg-Zn-Ca amorphous alloys for biomedical applications

In the present work, ribbon and 2-mm rod samples of Mg-Zn-Ca-Mn alloys were prepared by meltspinning and copper mold injection methods, respectively. Effects of Mn doping on glass-forming ability and corrosion performance in simulated body fluid of Mg65Zn30Ca5 alloy were studied through X-ray diffraction, scanning electron microscopy, differential scanning calorimeter, and electrochemical and immersion tests. Results show that with the Mn addition increasing, all the ribbon samples are completely in amorphous state. However, the microstructure of 2-mm rod samples transfers from fully amorphous for the Mn-free alloy to almost polycrystalline state with precipitated Mg, Mn, and MgZn phases. Glass-forming ability of Mg65Zn30Ca5 alloy is decreased by Mn addition. Results of electrochemical and immersion tests demon- strate that the Mn-doped samples exhibit more negative corrosion potential and larger corrosion current density, suggesting that the corrosion resistance decreases with doping amount of Mn element increasing.

Influences of preparation techniques on glass-forming ability of Fe-P-B-Si-C amorphous alloys

It has been widely accepted that the ultrafast cooling rate is required for the glass formation of amorphous alloys. Here, the larger glass-forming ability （GFA） of Fe76P5（B0.5Si0.3C0.2）19 amorphous alloy was achieved by water quenching at lower cooling rate under argon atmosphere. Cylindrical rods with diameters of 1-2 mm were prepared by water quenching without flux treatment, Cu-mold injection casting, and Cu-mold suction casting, respectively. The influences of the preparation techniques with different cooling rates on GFA, thermal property, and nucleation/growth behavior were examined. The critical diameter of the Fe76P5（B0.5Si0.3C0.2）19 amorphous alloys is 1.7 mm for water quenching while smaller than 1.0 mm for injection casting. Microstructure analysis indicates that the crystallization and solidification processes are quite different between the water-quenched and the injection-cast rods. These findings could deepen fun-damental understanding on the relationship between the cooling rate, techniques, and GFA of Fe-based amorphous alloys.

Role of compositional changes on thermal,magnetic,and mechanical properties of Fe-P-C-based amorphous alloys

This work aimed to tune the comprehensive properties of Fe-P-C-based amorphous system through investigating the role of microalloying process on the crystallization behavior,glass forming ability(GFA),soft magnetic features,and mechanical properties.Considering minor addition of elements into the system,it was found that the simultaneous microalloying of Ni and Co leads to the highest GFA,which was due to the optimization of compositional heterogeneity and creation of near-eutectic composition.Moreover,the FeCoNiCuPC amorphous alloy exhibited the best anelastic/viscoplastic behavior under the nanoindentation test,which was owing to the intensified structural fluctuations in the system.However,the improved plasticity by the extra Cu addition comes at the expense of magnetic properties,so that the saturation magnetization of this alloying system is significantly decreased compared to the FeCoPC amorphous alloy with the highest soft magnetic properties.In total,the results indicated that a combination of added elemental constitutes,i.e.,Fe69Co5Ni5Cu1P13C7 composition,provides an optimized state for the comprehensive properties in the alloying system.

The relationship between viscosity and glass forming ability of Al-(Ni)-Yb alloy systems

The dynamic viscosity of Al-Yb and Al-Ni-Yb superheated melts was measured using a torsional oscillation viscometer. The results show that the temperature dependence of viscosity fits the Arrhenius law well and the fitting factors are calculated. The amorphous ribbons of these alloys were produced by the melt spinning technique and the thermal properties were characterized by using a differential scanning calorimetry (DSC). E (the activation energy for viscous flow), which reflects the change rate of viscosity, has a good negative relation with the GFA in both Al-Yb and Al-Ni-Yb systems. However, there is no direct relation between liquidus viscosity (ηL) and GFA. The superheated fragility M can predict GFA in Al-Yb or Al-Ni-Yb alloy system.

Correlation between liquid structure and glass forming ability in glassy Ag-based binary alloys

The atomic structures of liquid Ag-based binary alloys have been investigated in the solidification process by means of X-ray diffraction. The results of liquid structure show that there is a break point in the mean nearest neighbor distance r1 and the coordination number Nmin for glass-forming liquid, while the correlation radius rc and the coordination number Nmin display a monotone variational trend above the break point. It means glass-forming liquids have a steady changing in structure above liquidus and more inhomogeneous state at liquidus. We conclude that there is a strong correlation between liquid structure and glass forming ability in Ag-based binary alloys.

Formation and Mechanical Properties of Zr-Nb-Cu-Ni-Al-Lu Bulk Glassy Alloys with Superior Glass-Forming Ability

Glass-forming ability（GFA） and mechanical properties of（Zr_（0.58）Nb_（0.03）Cu_（0.16）Ni_（0.13）Al_（0.10））_（100-x）Lu_x（x= 0-3 at%） alloys have been investigated.The GFA of Zr_（58）Nb_3Cu_（16）Ni_（13）Al_（10） alloy is dramatically enhanced by adding Lu.The（Zr_（0.58）Nb_（0.03）Cu_（0.16）Ni_（0.13）Al_（0.10））_（98）Lu_2 alloy possesses the highest GFA in the studied Zr-Nb-Cu-Ni-Al-Lu alloys,with its critical diameter for glass formation reaching 20 mm by copper-mould casting method,while that of the Lu-free Zr_（58）Nb_3Cu_（16）Ni_（13）Al_（10） alloy is 7 mm.The critical diameters of（Zr_（0.58）Nb_（0.03）Cu_（0.16）Ni_（0.13）Al_（0.10））_（100-x）Lu_x（x =1 at%and 3 at%） alloys are 15 mm and 12 mm,respectively.The Lu addition to Zr_（58）Nb_3Cu_（16）Ni_（13）Al_（10） alloy induces the change of initial crystallization phases from face-centred-cubic Zr_2Ni and tetragonal Zr_2Ni phases for the Lu-free Zr_（58）Nb_3Cu_（16）Ni_（13）Al_（10） alloy to an icosahedral quasi-crystalline phase for the Lu-doped alloys,which may be the origin for the enhanced GFA of the Lu-doped alloys.The compressive fracture strength and plastic strain of the bulk glassy（Zr_（0.58）Nb_（0.03）Cu_（0.16）Ni_（0.13）Al_（0.10））_（98）Lu_2 alloy are1 610 MPa and 1.5%,respectively.

Glass forming ability of Zr-and Fe-based alloys at quenching from melts

The master alloy ingots (MAI) with the nominal composition Zr 52.5 Ti 5Cu 17.9 Ni 14.6 Al 10 and Fe 61 Co 7Zr 10 Mo 5W 2B 15 (at%) were prepared by arc melting in Ti gettered Ar atmosphere. The Zr based buttons of 6 mm and 9 mm in diameter were fully amorphous, but those of 13 mm in diameter experienced crystallization. The glass forming ability (GFA) of Fe based alloys was relatively lower, and the buttons obtained were fully crystallized. The microhardness of the Zr based buttons was about 500(Hv), and the Fe based rod obtained by injection technique exhibited a high Vickers hardness of 1329. In addition, an amorphous crystalline transition layers were observed in both the buttons and the rods.

Glass forming ability, microstructure and magnetic property of NdAlNiCuFe alloys

The glass forming ability (GFA), microstructure and magnetic property in (Nd60Al10Ni10)Cu20-xFex (0≤ x≤ 20) alloys were investigated by using X-ray diffraction (XRD), differential scanning calorimetry (DSC), high resolution transmission electron mi- croscopy (HRTEM) and magnetic property measurement. It is shown that the GFA of the alloys decreases with Fe content. The sam- ples for bulk cylinders with x≤10 show a distinct endothermic peak in the DSC traces due to a glass transition in the range of 421-438 K. With further increasing Fe, the glass transition is masked by the crystallization. The microstructure of the Nd-based alloy can change progressively from full glassy state into composite state with nanocrystalline particles in the glassy matrix indicating the glass forming ability degrades with increasing Fe. The average size of nanocrystals increases with Fe and the distribution changes from homogenous to heterogeneous. The magnetic property varies from paramagnetic to hard magnetic when the Fe content increases up to about 4at% indicating that the magnetic property is related to the metastable phases.