Ag island films with different sizes are deposited on hydrogenated amorphous silicon carbide （a-SiC：H） films, and the influences of Ag island films on the optical properties of the tx-SiC：H films are investigated....Ag island films with different sizes are deposited on hydrogenated amorphous silicon carbide （a-SiC：H） films, and the influences of Ag island films on the optical properties of the tx-SiC：H films are investigated. Atomic force microscope images show that Ag nanoislands are formed after Ag coating, and the size of the Ag islands increases with increasing Ag deposition time. The extinction spectra indicate that two resonance absorption peaks which correspond to out-of-plane and in-plane surface plasmon modes of the Ag island films are obtained, and the resonance peak shifts toward longer wavelength with increasing Ag island size. The photoluminescence （PL） enhancement or quenching depends on the size of Ag islands, and PL enhancement by 1.6 times on the main PL band is obtained when the sputtering time is 10 min. Analyses show that the influence of surface plasmons on the PL of a-SiC：H is determined by the competition between the scattering and absorption of Ag islands, and PL enhancement is obtained when scattering is the main interaction between the Ag islands and incident light.展开更多
The method of numerical simulation is used to fit the relationship between the photoconductivity in films and the illumination time. The generation and process rule of kinds of different charged defect states during i...The method of numerical simulation is used to fit the relationship between the photoconductivity in films and the illumination time. The generation and process rule of kinds of different charged defect states during illumination are revealed. It is found surprisingly that the initial photoconductivity determines directly the total account of photoconductivity degradation of sample.展开更多
Hydrogenated amorphous silicon （a-Si：H） films with high and same order of magnitude photosensitivity （-10^5） but different stability were prepared by using microwave electron cyclotron resonance chemical vapour d...Hydrogenated amorphous silicon （a-Si：H） films with high and same order of magnitude photosensitivity （-10^5） but different stability were prepared by using microwave electron cyclotron resonance chemical vapour deposition system under the different deposition conditions. It was proposed that there was no direct correlation between the photosensitivity and the hydrogen content （CH） as well as H-Si bonding configurations, but for the stability, they were the critical factors. The experimental results indicated that higher substrate temperature, hydrogen dilution ratio and lower deposition rate played an important role in improving the microstructure of a-Si：H films. We used hydrogen elimination model to explain our experimental results.展开更多
Influence of the parameters of plasma enhanced chemical vapor deposition （PECVD） on the surface morphology of hydrogenated amorphous silicon （α-Si：H） film was investigated. The root-mean-square （RMS） roughness...Influence of the parameters of plasma enhanced chemical vapor deposition （PECVD） on the surface morphology of hydrogenated amorphous silicon （α-Si：H） film was investigated. The root-mean-square （RMS） roughness of the film was measured by atomic force microscope （AFM） and the relevant results were analyzed using the surface smoothing mechanism of film deposition. It is shown that an α-Si：H film with smooth surface morphology can be obtained by increasing the PH3/N2 gas flow rate for 10% in a high frequency （HF） mode. For high power, however, the surface morphology of the film will deteriorate when the Sill4 gas flow rate increases. Furthermore, optimized parameters of PECVD for growing the film with smooth surface were obtained to be Sill4：25 sccm （standard cubic centimeters per minute）, At： 275 sccm, 10%PH3/N2：2 sccm, HF power： 15 W, pressure： 0.9 Torr and temperature： 350℃. In addition, for in thick fihn deposition on silicon substrate, a N20 and NH3 preprocessing method is proposed to suppress the formation of gas bubbles.展开更多
Laser interference induced crystallization of amorphous silicon （a-Si） on the glass substrate was performed using a Q-switched Nd：YAG （yttrium aluminum garnet） laser. White light interferometer （WLI） and atomic...Laser interference induced crystallization of amorphous silicon （a-Si） on the glass substrate was performed using a Q-switched Nd：YAG （yttrium aluminum garnet） laser. White light interferometer （WLI） and atomic force microscope （AFM） were used to characterize the morphology of the structured films, while X-ray diffraction （XRD）, combined with the AFM, was used to analyse the crystalline structure of the film. The experimental results show that the laser energy density above a certain threshold, in the range of 400-500 mJ/cm2,triggers the patterned crystallizations which take the form similar to the laser intensity distribution. For the patterned crystallization under multipulse exposure, a definite polycrystalline structure with individual phases was observed by XRD. The difference in feature form, e.g., deepened craters or heightened lines, is related to the laser energy density relative to the threshold of evaporation of the material.展开更多
Intrinsic hydrogenated amorphous silicon（a-Si：H） film is deposited on n-type crystalline silicon（c-Si） wafer by hotwire chemical vapor deposition（HWCVD） to analyze the amorphous/crystalline heterointerface pass...Intrinsic hydrogenated amorphous silicon（a-Si：H） film is deposited on n-type crystalline silicon（c-Si） wafer by hotwire chemical vapor deposition（HWCVD） to analyze the amorphous/crystalline heterointerface passivation properties.The minority carrier lifetime of symmetric heterostructure is measured by using Sinton Consulting WCT-120 lifetime tester system,and a simple method of determining the interface state density（D_（it）） from lifetime measurement is proposed.The interface state density（D_（it）） measurement is also performed by using deep-level transient spectroscopy（DLTS） to prove the validity of the simple method.The microstructures and hydrogen bonding configurations of a-Si：H films with different hydrogen dilutions are investigated by using spectroscopic ellipsometry（SE） and Fourier transform infrared spectroscopy（FTIR） respectively.Lower values of interface state density（D_（it）） are obtained by using a-Si：H film with more uniform,compact microstructures and fewer bulk defects on crystalline silicon deposited by HWCVD.展开更多
Hydrogenated amorphous silicon （a-Si： H） films were deposited on Si （100） and glass substrates by dielectric barrier discharge enhanced chemical vapour deposition （DBD-CVD） in （SiH4＋H2） atmosphere at room te...Hydrogenated amorphous silicon （a-Si： H） films were deposited on Si （100） and glass substrates by dielectric barrier discharge enhanced chemical vapour deposition （DBD-CVD） in （SiH4＋H2） atmosphere at room temperature. Results of the thickness measurement, SEM （scanning electron microscope）, Raman, and FTIR （Fourier transform infrared spectroscopy） show that with the increase in the applied peak voltage, the deposition rate and network order of the films increase, and the hydrogen bonding configurations mainly in di-hydrogen （Si-H2） and poly hydrogen （SiH2）n are introduced into the films. The UV-visible transmission spectra show that with the decrease in SiH4/ （SiHn＋H2） the thin films＇ band gap shifts from 1.92 eV to 2.17 eV. These experimental results are in agreement with the theoretic analysis of the DBD discharge. The deposition of a-Si： H films by the DBD-CVD method as reported here for the first time is attractive because it allows fast deposition of a-Si： H films on large-area low-melting-point substrates and requires only a low cost of production without additional heating or pumping equipment.展开更多
Silicon is a promising anode material for rechargeable Li-ion battery (LIB) due to its high energy density and relatively low operating voltage. However, silicon based electrodes suffer from rapid capacity degradation...Silicon is a promising anode material for rechargeable Li-ion battery (LIB) due to its high energy density and relatively low operating voltage. However, silicon based electrodes suffer from rapid capacity degradation during electrochemical cycling. The capacity decay is predominantly caused by (i) cracking due to large volume variations during lithium insertion/extraction and (ii) surface degradation due to excessive solid electrolyte interface (SEI) formation. In this work, we demonstrate that coating of a-Si thin film with a Li-active, nanoporous SiOx layer can result in exceptional electrochemical performance in Li-ion battery. The SiOx layer provides improved cracking resistance to the thin film and prevent the active material loss due to excessive SEI formation, benefiting the electrode cycling stability. Half-cell experiments using this anode material show an initial reversible capacity of 2173 mAh g^-1 with an excellent coulombic efficiency of 90.9%. Furthermore, the electrode shows remarkable capacity retention of ~97% after 100 cycles at C/2 charging rate. The proposed anode architecture is free from Liinactive binders and conductive additives and provides mechanical stability during the charge/discharge process.展开更多
Large-scale amorphous silicon nanowires (SiNWs) with a diameter about 100 nm and a length of dozens of micrometers on silicon wafers were synthesized by thermal evaporation of silicon monoxide (SiO). Scanning electron...Large-scale amorphous silicon nanowires (SiNWs) with a diameter about 100 nm and a length of dozens of micrometers on silicon wafers were synthesized by thermal evaporation of silicon monoxide (SiO). Scanning electron microscope (SEM) and transmission electron microscope (TEM) observations show that the silicon nanowires are smooth. Selected area electron diffraction (SAED) shows that the silicon nanowires are amorphous and en-ergy-dispersive X-ray spectroscopy (EDS) indicates that the nanowires have the composition of Si and O elements in an atomic ratio of 1:2,their composition approximates that of SiO2. SiO is considered to be used as a Si sources to produce SiNWs. We conclude that the growth mechanism is closely related to the defect structure and silicon monoxide followed by growth through an oxide-assisted vapor-solid reaction.展开更多
The morphous silicon films prepared by PECVD at substrate temperatures of 30℃ have been crystallized by rapid thermal annealing method, the budget of time-temperature in the annealing process is 600℃ for 120s,...The morphous silicon films prepared by PECVD at substrate temperatures of 30℃ have been crystallized by rapid thermal annealing method, the budget of time-temperature in the annealing process is 600℃ for 120s, 850℃ for 120s, and 950℃ for 120s. The results indicate the crystallization at 850℃ and 950℃ are better as shown in micro-Raman scattering and scanning electronic microscope.展开更多
Under electron beam irradiation, the in-situ formation of 2H-SiC dentritic nanocrystals from amorphous silicon carbide at room temperature was observed. The homogenous transition mainly occurs at the thin edge and on ...Under electron beam irradiation, the in-situ formation of 2H-SiC dentritic nanocrystals from amorphous silicon carbide at room temperature was observed. The homogenous transition mainly occurs at the thin edge and on the surface of specimen where the energy obtained from electron beam irradiation is high enough to cause the amorphous crystallizing into 2H-SiC.展开更多
On the insulating side of the metal-insulator transition (MIT), the study of the effect of low Temperatures T on the electrical transport in amorphous silicon-nickel alloys a-Si1-yNiy:H exhibits that the electrical co...On the insulating side of the metal-insulator transition (MIT), the study of the effect of low Temperatures T on the electrical transport in amorphous silicon-nickel alloys a-Si1-yNiy:H exhibits that the electrical conductivity follows, at the beginning, the Efros-Shklovskii Variable Range Hopping regime (ES VRH) with T-1/2. This behaviour showed that long range electron-electron interaction reduces the Density Of State of carriers (DOS) at the Fermi level and creates the Coulomb gap (CG). For T higher than a critical value of temperature TC, we obtained the Mott Variable Range Hopping regime with T-1/4, indicating that the DOS becomes almost constant in the vicinity of the Fermi level. The critical temperature TC decreases with nickel content in the alloys.展开更多
基金Project supported by the Key Basic Research Project of Hebei Province, China (Grant No. 12963929D)the Natural Science Foundation of Hebei Province,China (Grant Nos. F2012201007 and F2012201042)
文摘Ag island films with different sizes are deposited on hydrogenated amorphous silicon carbide （a-SiC：H） films, and the influences of Ag island films on the optical properties of the tx-SiC：H films are investigated. Atomic force microscope images show that Ag nanoislands are formed after Ag coating, and the size of the Ag islands increases with increasing Ag deposition time. The extinction spectra indicate that two resonance absorption peaks which correspond to out-of-plane and in-plane surface plasmon modes of the Ag island films are obtained, and the resonance peak shifts toward longer wavelength with increasing Ag island size. The photoluminescence （PL） enhancement or quenching depends on the size of Ag islands, and PL enhancement by 1.6 times on the main PL band is obtained when the sputtering time is 10 min. Analyses show that the influence of surface plasmons on the PL of a-SiC：H is determined by the competition between the scattering and absorption of Ag islands, and PL enhancement is obtained when scattering is the main interaction between the Ag islands and incident light.
文摘The method of numerical simulation is used to fit the relationship between the photoconductivity in films and the illumination time. The generation and process rule of kinds of different charged defect states during illumination are revealed. It is found surprisingly that the initial photoconductivity determines directly the total account of photoconductivity degradation of sample.
文摘Hydrogenated amorphous silicon （a-Si：H） films with high and same order of magnitude photosensitivity （-10^5） but different stability were prepared by using microwave electron cyclotron resonance chemical vapour deposition system under the different deposition conditions. It was proposed that there was no direct correlation between the photosensitivity and the hydrogen content （CH） as well as H-Si bonding configurations, but for the stability, they were the critical factors. The experimental results indicated that higher substrate temperature, hydrogen dilution ratio and lower deposition rate played an important role in improving the microstructure of a-Si：H films. We used hydrogen elimination model to explain our experimental results.
基金National Natural Science Foundation of China (Nos.60407013,60876081)the Shanghai-Applied Materials Research and Development Fund of China (No.06SA04)the National High Technology Research and Development Program of China (Nos.2009AA04Z317,2007AA04Z354-03)
文摘Influence of the parameters of plasma enhanced chemical vapor deposition （PECVD） on the surface morphology of hydrogenated amorphous silicon （α-Si：H） film was investigated. The root-mean-square （RMS） roughness of the film was measured by atomic force microscope （AFM） and the relevant results were analyzed using the surface smoothing mechanism of film deposition. It is shown that an α-Si：H film with smooth surface morphology can be obtained by increasing the PH3/N2 gas flow rate for 10% in a high frequency （HF） mode. For high power, however, the surface morphology of the film will deteriorate when the Sill4 gas flow rate increases. Furthermore, optimized parameters of PECVD for growing the film with smooth surface were obtained to be Sill4：25 sccm （standard cubic centimeters per minute）, At： 275 sccm, 10%PH3/N2：2 sccm, HF power： 15 W, pressure： 0.9 Torr and temperature： 350℃. In addition, for in thick fihn deposition on silicon substrate, a N20 and NH3 preprocessing method is proposed to suppress the formation of gas bubbles.
文摘Laser interference induced crystallization of amorphous silicon （a-Si） on the glass substrate was performed using a Q-switched Nd：YAG （yttrium aluminum garnet） laser. White light interferometer （WLI） and atomic force microscope （AFM） were used to characterize the morphology of the structured films, while X-ray diffraction （XRD）, combined with the AFM, was used to analyse the crystalline structure of the film. The experimental results show that the laser energy density above a certain threshold, in the range of 400-500 mJ/cm2,triggers the patterned crystallizations which take the form similar to the laser intensity distribution. For the patterned crystallization under multipulse exposure, a definite polycrystalline structure with individual phases was observed by XRD. The difference in feature form, e.g., deepened craters or heightened lines, is related to the laser energy density relative to the threshold of evaporation of the material.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51361022 and 61574072)the Postdoctoral Science Foundation of Jiangxi Province,China(Grant No.2015KY12)
文摘Intrinsic hydrogenated amorphous silicon（a-Si：H） film is deposited on n-type crystalline silicon（c-Si） wafer by hotwire chemical vapor deposition（HWCVD） to analyze the amorphous/crystalline heterointerface passivation properties.The minority carrier lifetime of symmetric heterostructure is measured by using Sinton Consulting WCT-120 lifetime tester system,and a simple method of determining the interface state density（D_（it）） from lifetime measurement is proposed.The interface state density（D_（it）） measurement is also performed by using deep-level transient spectroscopy（DLTS） to prove the validity of the simple method.The microstructures and hydrogen bonding configurations of a-Si：H films with different hydrogen dilutions are investigated by using spectroscopic ellipsometry（SE） and Fourier transform infrared spectroscopy（FTIR） respectively.Lower values of interface state density（D_（it）） are obtained by using a-Si：H film with more uniform,compact microstructures and fewer bulk defects on crystalline silicon deposited by HWCVD.
基金the National Natural Science Foundation of china(No.50372060)
文摘Hydrogenated amorphous silicon （a-Si： H） films were deposited on Si （100） and glass substrates by dielectric barrier discharge enhanced chemical vapour deposition （DBD-CVD） in （SiH4＋H2） atmosphere at room temperature. Results of the thickness measurement, SEM （scanning electron microscope）, Raman, and FTIR （Fourier transform infrared spectroscopy） show that with the increase in the applied peak voltage, the deposition rate and network order of the films increase, and the hydrogen bonding configurations mainly in di-hydrogen （Si-H2） and poly hydrogen （SiH2）n are introduced into the films. The UV-visible transmission spectra show that with the decrease in SiH4/ （SiHn＋H2） the thin films＇ band gap shifts from 1.92 eV to 2.17 eV. These experimental results are in agreement with the theoretic analysis of the DBD discharge. The deposition of a-Si： H films by the DBD-CVD method as reported here for the first time is attractive because it allows fast deposition of a-Si： H films on large-area low-melting-point substrates and requires only a low cost of production without additional heating or pumping equipment.
基金financial support from ARC Discovery Projects (DP150101717 and DP180102003)
文摘Silicon is a promising anode material for rechargeable Li-ion battery (LIB) due to its high energy density and relatively low operating voltage. However, silicon based electrodes suffer from rapid capacity degradation during electrochemical cycling. The capacity decay is predominantly caused by (i) cracking due to large volume variations during lithium insertion/extraction and (ii) surface degradation due to excessive solid electrolyte interface (SEI) formation. In this work, we demonstrate that coating of a-Si thin film with a Li-active, nanoporous SiOx layer can result in exceptional electrochemical performance in Li-ion battery. The SiOx layer provides improved cracking resistance to the thin film and prevent the active material loss due to excessive SEI formation, benefiting the electrode cycling stability. Half-cell experiments using this anode material show an initial reversible capacity of 2173 mAh g^-1 with an excellent coulombic efficiency of 90.9%. Furthermore, the electrode shows remarkable capacity retention of ~97% after 100 cycles at C/2 charging rate. The proposed anode architecture is free from Liinactive binders and conductive additives and provides mechanical stability during the charge/discharge process.
文摘Large-scale amorphous silicon nanowires (SiNWs) with a diameter about 100 nm and a length of dozens of micrometers on silicon wafers were synthesized by thermal evaporation of silicon monoxide (SiO). Scanning electron microscope (SEM) and transmission electron microscope (TEM) observations show that the silicon nanowires are smooth. Selected area electron diffraction (SAED) shows that the silicon nanowires are amorphous and en-ergy-dispersive X-ray spectroscopy (EDS) indicates that the nanowires have the composition of Si and O elements in an atomic ratio of 1:2,their composition approximates that of SiO2. SiO is considered to be used as a Si sources to produce SiNWs. We conclude that the growth mechanism is closely related to the defect structure and silicon monoxide followed by growth through an oxide-assisted vapor-solid reaction.
文摘The morphous silicon films prepared by PECVD at substrate temperatures of 30℃ have been crystallized by rapid thermal annealing method, the budget of time-temperature in the annealing process is 600℃ for 120s, 850℃ for 120s, and 950℃ for 120s. The results indicate the crystallization at 850℃ and 950℃ are better as shown in micro-Raman scattering and scanning electronic microscope.
基金Project supproted by the National Natural Science Foundation of China (60025409 and 50472068) and National "863" High Technology Plan (2001AA311080) and Program for New Century Excellent Talents in Shangdong University
文摘Under electron beam irradiation, the in-situ formation of 2H-SiC dentritic nanocrystals from amorphous silicon carbide at room temperature was observed. The homogenous transition mainly occurs at the thin edge and on the surface of specimen where the energy obtained from electron beam irradiation is high enough to cause the amorphous crystallizing into 2H-SiC.
文摘On the insulating side of the metal-insulator transition (MIT), the study of the effect of low Temperatures T on the electrical transport in amorphous silicon-nickel alloys a-Si1-yNiy:H exhibits that the electrical conductivity follows, at the beginning, the Efros-Shklovskii Variable Range Hopping regime (ES VRH) with T-1/2. This behaviour showed that long range electron-electron interaction reduces the Density Of State of carriers (DOS) at the Fermi level and creates the Coulomb gap (CG). For T higher than a critical value of temperature TC, we obtained the Mott Variable Range Hopping regime with T-1/4, indicating that the DOS becomes almost constant in the vicinity of the Fermi level. The critical temperature TC decreases with nickel content in the alloys.
基金supported by National Natural Science Foundation of China(60676044,61006057)Electronics Engineering of College of Heilongjiang Province(DZZD20100013)
