Synthesis of an Amphiphilic Dendrimer-Like Block Copolymer and Its Application on Drug Delivery

Dendrimer-like amphiphilic copolymer is a kind of three-dimensional spherical structure polymer. An amphiphilic dendrimer-like diblock copolymer, PEEGE-G2-b-PEO（OH）12, constituted of a hydrophobic poly（ethoxyethyl glycidol ether） inner core and a hydrophilic poly（ethylene oxide） outer layer, has been successfully synthesized by the living anionic ring-opening polymerization method. The intermediates and targeted products were charac-terized with 1H NMR spectroscopy and gel permeation chromatography. The application on drug delivery of dendrimer-like diblock copolymer PEEGE-G2-b-PEO（OH）12 using DOX as a model drug was also studied. The drug loading content and encapsulation e ciency were found at 13.07% and 45.75%, respectively. In vitro release experiment results indicated that the drug-loaded micelles exhibited a sustained release behavior under acidic media.

NOVEL AMPHIPHILIC FLUORESCENT GRAFT COPOLYMER: SYNTHESIS, CHARACTERIZATION AND ENCAPSULATION OF A HYDROPHOBIC AGENT

Novel amphiphilic fluorescent graft copolymer （PVP-PyAHy） was successfully synthesized by the free radical copolymerization of hydrophobic monomer N-（1-pyrenebutyryl）-N＇-acryloyl hydrazide （PyAHy） with hydrophilic precursor polymers of vinyl-functionalized poly（N-vinylpyrrolidone） （PVP） in DMF. The copolymer is amphiphilic and has intrinsic fluorescence. FT-IR, ^1H-NMR, TEM, gel permeation chromatography-multi-angle laser light scattering, UV-Vis spectroscopy and fluorescence spectroscopy were used to characterize this copolymer. The TEM observation shows that the copolymer PVP-PyAHy forms micelles in aqueous solution. Results of fluorometric measurements illustrate that the critical micelle concentration （CMC） value of PVP-PyAHy in aqueous solution is about 0.90 mg/mL. To examine the encapsulation ability of the copolymer in aqueous media, methyl yellow was employed as a model hydrophobic agent. The loading level of the polymer to methyl yellow is 8.8 mg/g. The cytotoxicity assays for Madin Darby Canine Kidney （MDCK） cells shows good biocompatibility of PVP-PyAHy in vitro. These results suggest the potential of this copolymer PVP-PyAHy as drugs delivery carrier and fluorescent tracer.

Synthesis and characterization of H-type amphiphilic liquid crystalline block copolymers by ATRP

H-type amphiphilic liquid crystalline block copolymers containing azobenzene were synthesized by atom transfer radical polymerization （ATRP）. Macroinitiators prepared by the esterification between poly（ethylene oxide） （PEG） and 2,2-dichloroacetyl chloride were utilized to initiate the polymerization of 6-[4-（4-ethoxyphenylazo）phenoxy]hexyl rnethacrylate （M6C）. The resulting macroinitiators and block copolymers were characterized by ^1H NMR, gel permeation chromatography （GPC）. Polarizing optical microscopy （POM） and differential scanning calorimetry （DSC） preliminarily revealed the liquid crystalline property of these block copolymers. This series of liquid crystalline block copolymers are promising in some areas, such as optical data storage, optical switch, and molecular devices.

SYNTHESIS OF AMPHIPHILIC COMB-SHAPED COPOLYMERS USED FOR SURFACE MODIFICATION OF PVDF MEMBRANES

The synthesis of a novel amphiphilic comb-shaped copolymer consisting of a main chain of styrene-(N-(4- hydroxyphenyl) maleimide)(SHMI) copolymer and poly(ethylene glycol) methyl ether methacrylate(PEGMA) side groups was achieved by atom transfer radical polymerization(ATRP).The amphiphilic copolymers were characterized by ~1H-NMR, Fourier transform infrared(FTIR) spectroscopy and gel permeation chromatography(GPC).From thermogravimetric analysis (TGA),the decomposition temperature of SHMI-g-PEGMA is lower ...

AMPHIPHILIC STAR-BLOCK COPOLYMERS BY IODIDE-MEDIATED RADICAL POLYMERIZATION

Amphiphilic star-block copolymers composed of polystyrene and poly（acrylic acid） were synthesized by iodide- mediated radical polymerization. Firstly, free radical polymerization of styrene was carried out with AIBN as initiator and 1,1,1-trimethyolpropane tri（2-iodoisobutyrate） as chain transfer agent, giving iodine atom ended star-shaped polystyrene with three arm chains, R（polystyrene）3. Secondly, tert-butyl acrylate was polymerization using polystyrene obtained as macro-chain transfer agent, and star-block copolymer, R（polystyrene-b-poly（tert-butyl acrylate））3 with controlled molecular weight was obtained. Finally, amphiphilic star-block copolymer, R（polystyrene-b-poly（acrylic acid））3 was obtained by hydrolysis of R（polystyrene-b-poly（tert-butyl acrylate））3 under acidic condition.

SYNTHESIS AND CHARACTERIZATION OF AMPHIPHILIC GRAFT COPOLYMER CONTAINING MICROPHASE SEPARATED AND LONG POLY(ETHYLENE OXIDE) SIDE CHAIN STRUCTURES

Acryloyl terminated Poly (ethyleneoxide)macromonomers (PEO-A) with different PEO chain lengths have been prepared by deactivation of PEO alkoxide with acryloyl chloride. A new kind of amphiphilic polystyrene-g-poly (ethylene oxide)graft copolymer containing both microphase separated and PEO side chain structures has been synthesized from radical copolymerization of PEO-A macromonomer with styrene. After careful purification by a newly-developed method called 'selective dissolution', the well-defined structure of the purified copolymers was confirmed by IR, ~1H-NMR and GPC. Various experimental parameters controlling the copolymerization were studied in detail. The results indicated that the feed ratio of styrene to macromonomer(S/M) was the most important determining factor for the composition of the copolymers. A detailed 'comb- model' was proposed to describe the molecular structure of the graft copolymers. Finally, this amphiphilic graft copolymers may readily form microphase separated structures as clearly indicated by transmission electron microscopy.

MORPHOLOGICAL TRANSITION BETWEEN VESICLES AND TUBULES FOR A GLYCOPOLYMER-CONTAINING AMPHIPHILIC DIBLOCK COPOLYMER IN AQUEOUS SOLUTIONS

The morphological transition of molecular assemblies in aqueous solutions for a new amphiphilic diblock copolymer induced by changing the initial solvent conditions was studied by transmission electron microscopy (TEM). The copolymer was polystyrene(77)-b-poly[2-(beta -D-glucopyranosyloxy)ethyl acrylate (6)] (PSt(77)-b-PGEA(6)) and the solvent was a mixture of DMF and THF. PSt(77)-b-PGEA(6) yields vesicles and tubules when it is initially dissolved in THF and DMF respectively. The morphological transition between vesicles and tubules can be achieved by simply varying the amounts of THF and DMF, or changing the temperature at which the aggregates were prepared.

SYNTHESIS OF AN AMPHIPHILIC PPESK-g-P(PEGMA)GRAFT COPOLYMER VIA ATRP AND ITS USE IN BLEND MODIFICATION OF PPESK MEMBRANES

Preparation of an amphiphilic graft copolymer having poly(phthalazinone ether sulfone ketone)(PPESK) as main chains was carried out by atom transfer radical polymerization(ATRP).The precursor,chloromethylated PPESK (CMPPESK),was prepared by using chioromethylether as chloromethylation agent.Then,poly(ethylene glycol) methyl ether methacrylate(PEGMA) was used as monomer to synthesize PPESK-g-P(PEGMA) by ATRP method under the catalysis of a cuprous chloride/2,2'-bipyridyl system.PPESK/PPESK-g-P(PEGMA) blend m...

Synthesis and characterization of a novel amphiphilic biodegradable β-cyclodextrin/poly(γ-benzyl L-glutamate) copolymer

β-Cyclodextrin/poly（γ-benzyl L-glutamate） （β-CD-PBLG） copolymers were synthesized by ring-opening polymerization of N- carboxy-γ-benzyl L-glutamate anhydride （BLG-NCA） in N,N-dimethylformamide （DMF） initiated by mono-amino-β-cyclodextrin（H2N-β-CD）. The structures of the copolymers were confirmed by IR, ^1H NMR and GPC. The fluorescence technique was used to determine the critical micelle concentrations （CMC） of copolymer micell solution, the diameter and the distribution of micelles were characterized by DLS. The results showed that BLG-NCA could be initiated by H2N-β-CD to produce copolymer. The nanomicells were formed by these copolymers in water.

Enzymatic Synthesis and Characterization of Novel Amphiphilic Triblock Copolymer Poly(p-dioxanone-co-5-benzyloxytrimethylene carbonate)-block-poly(ethylene glycol)

Novel amphiphilic triblock copolymer poly（p-dioxanone-co-5-benzyloxytrimethylene carbonate）-block-poly（ethylene glycol）-block-poly（p-dioxanone-co-5-benzyloxytrimethylene carbonate） （p（PDO-co-BTMC）-b-PEG-b-p（PDO-co-BTMC）） was successfully synthesized using immobilized porcine pancreas lipase on porous silica particles （IPPL） as the catalyst for the fLrSt time. 1H NMR, 13C NMR and GPC analysis were used to confirm the structures of resulting copolymers. The molecular weight （Mn） of the copolymer with feed ratio of 69：20：11 （BTMC： PDO： PEG ） was 31300 g/mol and the polydispersity was 1.85, while the Mn decreased to 25000 g/mol and polydispersity of 1.93 with the feed ratio of 50：40：10.

Synthesis, Purification and Characterization of Amphiphilic and Microphase Separated Graft Copolymer Polystyrene-g-Poly(ethylene oxide)

The present paper covers the poly (ethylene oxide) macromer with vinyl benzyl terminal group (PEO-VB) prepared by deactivation of the alkoxide function of mono-functional 'living' PEO chains with vinyl benzyl chloride (VBC). The obtained macromers were subjected to careful purification and detailed characterization. A new kind of amphiphilic polystyrene-g-poly(ethylene oxide) (PS-g-PEO) with both mi-crophase separated and PEO side chains was synthesized from radical copolymerization of PEO-VB macromer with styrene monomer. An improved purification method, referred as 'selective dissolvation', was established for the isolation of graft copolymers from the grafting products, and the purity and yield of the purified copolymers were satisfactory. The well-defined structure of the purified copolymers was confirmed by IR, 1H NMR and GPC. The bulk composition of the graft copolymers was determined by a well-established first derivative UV spectrometry. Various experimental parameters controlling the copolymerization were also studied. The results indicate that the feed ratio of macromer to styrene (M/S) was the most important factor in determining the composition of the copolymers. Thus a series of PS-g-PEO with a wide range of bulk compositions were obtained simply by adjusting the value of M/S. As clearly indicated by transmission electron microscopy, this amphiphilic graft copolymers may readily form microphase separated structures.

SYNTHESIS OF A NEW KIND OF AMPHIPHILIC COPOLYMER AND CHARACTERIZATION OF THEIR LB FILMS

A new kind of amphiphilic copolymer was synthesized with azo bond functional side chains, and elementary studies about formation of I,B film, UV-visible spectra and photoelectrical properties of multilayers of this kind of amphiphilic copolymer were reported.

Preparation of pH-responsive membranes with amphiphilic copolymers by surface segregation method

Novel pH-responsive membranes were prepared by blending pH-responsive amphiphilic copolymers with polyethersulfone(PES) via a nonsolvent-induced phase separation(NIPS) technique. The amphiphilic copolymers bearing Pluronic F127 and poly(methacrylic acid)(PMAA) segments, abbreviated as PMAA n–F127–PMAA n,were synthesized by free radical polymerization. The physical and chemical properties of the blend membranes were evaluated by scanning electron microscopy(SEM), Fourier transform infrared(FTIR) spectrum, water contact angle, Zeta potential and X-ray photoelectron spectroscopy(XPS). The enrichment of hydrophilic PMAA segments on the membrane surfaces was attributed to surface segregation during the membrane preparation process. The blend membranes had signi ficant p H-responsive properties due to the conformational changes of surface-segregated PMAA segments under different pH values of feed solutions. Fluxes of the blend membranes were larger at low p H values of feed solutions than that at high pH values. The pH-responsive ability of the membranes was enhanced with the increase of the degree of PMAA near-surface coverage.

Morphological stability of worm-like vesicles consisting of amphiphilic diblock copolymer against external stress

The morphological stability of vesicles consisting of an amphiphilic poly(methacrylic acid)- block-poly(methyl methacrylate-random-methacrylic acid) diblock copolymer, PMAA-b-P(MMA-r-MAA), was investigated against the external stresses of pH, salt concentration and polyamine. The worm-like vesicles underwent a partial fusion at pH 12, however, they retained the worm-like shape at pH 13 due to electrostatic repulsion. On the other hand, the spherical vesicles were completely fused at pH 12, transformed into a sheet and did not retain their shape under the higher basic condition. Similarly, the worm-like vesicles retained their morphology in 0.1 mol% solutions of sodium chloride and sodium dodecyl sulfate, while the spherical vesicles caused division and fusion even at much lower concentrations. Poly(2-dimethylaminoethyl methacrylate)(PDMAEMA) transformed the worm-like vesicle into a cleavable sheet, while it changed the spherical vesicles into a sheet without a specific form. It was found that this transformation based on the acid-base interaction between the carboxylic acid of the MAA block and the amine of the PDMAEMA was dependent on the molecular weight of the PDMAEMA. The short PDMAEMA retarded the fusion of the vesicles.

Synthesis and Characterization of Amphiphific Block Copolymer Containing PVP and Poly（5-benzyloxytrimethylene carbonate）

Amphiphilic copolymer of 5-benzyloxytrimethylene carbonate （BTMC） with poly （vinyl pyrrolidone） （PVP） was successfully synthesized using immobilized porcine pancreas lipase （IPPL） or SnOct2 as catalyst. Hydroxyl terminated PVP, synthesized with 2-mercaptoethanol as a chain transfer reagent, was employed as a rnacroinitiator. The resulting copolymers were characterized by GPC, ^1H NMR and IR. Increasing the BTMC/PVP-OH feed ratio （[B]/[P]） resulted in the increase of Mn of corresponding copolymers and the decrease of Mw/Mn. Immobilized enzyme has comparable catalytic activity to SnOct2 for the copolymerization.

Formation of Copolymer-Ag Nanoparticles Composite Micelles in Three-dimensional Co-flow Focusing Microfluidic Device

A novel method was presented to create composite micelles of amphiphilic copolymers and Ag nanoparticles(NPs) in a three-dimensional co-flow focusing microfluidic device(3D CFMD). Self-assembly of the copolymers was initiated by the fast mixing of water and a blend dispersion of hydrophobic Ag NPs and amphiphilic copolymers. At the same time, the hydrophobic Ag NPs enter the core of copolymer micelles, based on the hydrophobic interaction. The copolymer-Ag NPs composite micelles have a core-shell structure with copolymer shell and Ag NPs core. COMSOL Multiphysics is used to simulate the concentration distribution of copolymers and Ag NPs under different flow rates. Co-assembly microfluidic conditions are determined based on simulation results. Under suitable microfluidic conditions, both block copolymers and gradient copolymers can co-assemble with hydrophobic Ag NPs to form composite micelles, respectively. This microfluidic coassembly method will have a good prospect in the preparation of composite micelles of amphiphilic copolymers and metal nanoparticles.

MOLECULAR DESIGN SYNTHESIS AND PROPERTIES OF SIX KINDS OF MULTIPHASE (STYRENE-ETHYLENE OXIDE)COPOLYMERS

Multiphase copolymers of styrene (S) and ethylene oxide (EO) are amphiphilic, because of the hydrophobic and amorphous polystyrene (PS) segments and the hydrophilic and crystalline polyoxyethylene (PEO). They have many uses including polymeric surfactants, electrostatic charge reducers, compatibilizer in polymer

Preparation of Nano-porous Materials(Ⅱ) by Cross-linking of Amphiphilic Self-assemblies

Amphiphilic block copolymers can exhibit rich and complex morphologies in aqueous solutions, but these structures are usually delicate, easily disturbed by composition change or temperature change. In this work, the use of different methods to cross link block copolymer self assemblies in the presence of a selective solvent and to stabilize the structures is reviewed. In addition, the cross linking reaction kinetics of block copolymer amphiphilic self assemblies is briefly discussed.

Influence of Block Copolymer on Formation and Acid Resistant Properties of Hybrid CaCO_3 Particles

Block copolymer polystyrene-b-poly（acrylic acid）（PS-b-PAA） was used as structural template for the synthesis of CaCO3 microparticles. Through this procedure, acid resistant hybrid CaCO3 micro- spheres were obtained. Acid resistant properties of this type of hybrid CaCO3 were studied. Size measurement shows that the acid resistant properties of the hybrid particles are different in different solutions, such as HCl, EDTA, and H2SO4 solutions.

Metal-free synthesis of amphiphilic functional polycarbonates

Amphiphilic block copolymers of poly（5-benzyloxy trimethylene carbonate） （PBTMC） and poly（ethylene glycol） （PEG） were synthesized through enzymatic polymerization using immobilized porcine pancreas lipase （IPPL）. The obtained copolymers with different compositions were characterized by GPC and IH NMR. The copolymer composition was in agreement with the feed ratio. The molecular weight of the copolymers showed an increasing trend with the decrease of PEG contents. MiceUes of the copolymers were formed by dialysis procedure, and characterized by transmission electron microscopy （TEM）.