An all-optical phase detector by amplitude modulation of the local field in a Rydberg atom-based mixer

Recently,a Rydberg atom-based mixer was developed to measure the phase of a radio frequency(RF)field.The phase of the signal RF(SIG RF)field is down-converted directly to the phase of a beat signal created by the presence of a local RF(LO RF)field.In this study,we propose that the Rydberg atom-based mixer can be converted to an all-optical phase detector by amplitude modulation(AM)of the LO RF field;that is,the phase of the SIG RF field is related to both the amplitude and phase of the beat signal.When the AM frequency of the LO RF field is the same as the frequency of the beat signal,the beat signal will further interfere with the AM of the LO RF field inside the atom,and then the amplitude of the beat signal is related to the phase of the SIG RF field.The amplitude of the beat signal and the phase of the SIG RF field show a linear relationship within the range of 0 toπ/2 when the phase of the AM is set with a differenceπ/4 from the phase of the LO RF field.The minimum phase resolution can be as small as 0.6°by optimizing the experimental conditions according to a simple theoretical model.This study will expand and contribute to the development of RF measurement devices based on Rydberg atoms.

Amplitude modulation excitation for cancellous bone evaluation using a portable ultrasonic backscatter instrumentation

The ultrasonic backscatter(UB)has the advantage of non-invasively obtaining bone density and structure,expected to be an assessment tool for early diagnosis osteoporosis.All former UB measurements were based on exciting a short single-pulse and analyzing the ultrasonic signals backscattered in bone.This study aims to examine amplitude modulation(AM)ultrasonic excitation with UB measurements for predicting bone characteristics.The AM multiple lengths excitation and backscatter measurement(AM-UB)functions were integrated into a portable ultrasonic instrument for bone characterization.The apparent integrated backscatter coefficient in the AM excitation(AIB_(AM))was evaluated on the AM-UB instrumentation.The correlation coefficients of the AIB_(AM) estimating volume fraction(BV/TV),structure model index(SMI),and bone mineral density(BMD)were then analyzed.Significant correlations(|R|=0.82-0.93,p<0.05)were observed between the AIB_(AM),BV/TV,SMI,and BMD.By growing the AM excitation length,the AIB_(AM) values exhibit more stability both in 1.0-MHz and 3.5-MHz measurements.The recommendations in AM-UB measurement were that the avoided length(T1)should be lower than AM excitation length,and the analysis length(T2)should be enough long but not more than AM excitation length.The authors conducted an AM-UB measurement for cancellous bone characterization.Increasing the AM excitation length could substantially enhance AIB_(AM) values stability with varying analyzed signals.The study suggests the portable AM-UB instrument with the integration of real-time analytics software that might provide a potential tool for osteoporosis early screening.

Microwave electrometry with Rydberg atoms in a vapor cell using microwave amplitude modulation

We have theoretically and experimentally studied the dispersive signal of the Rydberg atomic electromagneticallyinduced transparency(EIT)Autler–Townes(AT)splitting spectra obtained using amplitude modulation of the microwave(MW)electric field.In addition to the two zero-crossing points interval△f_(zeros),the dispersion signal has two positive maxima with an interval defined as the shoulder interval△f_(sho),which is theoretically expected to be used to measure a much weaker MW electric field.The relationship of the MW field strength E_(MW)and△f_(sho)is experimentally studied at the MW frequencies of 31.6 GHz and 9.2 GHz respectively.The results show that△f_(sho)can be used to characterize the much weaker E_(MW)than that of△f_(zeros)and the traditional EIT–AT splitting interval△f_(m);the minimum E_(MW)measured by△f_(sho)is about 30 times smaller than that by△f_(m).As an example,the minimum E_(MW)at 9.2 GHz that can be characterized by△f_(sho)is 0.056 mV/cm,which is the minimum value characterized by the frequency interval using a vapor cell without adding any auxiliary fields.The proposed method can improve the weak limit and sensitivity of E_(MW)measured by the spectral frequency interval,which is important in the direct measurement of weak E_(MW).

Research on the design of metalens with achromatic and amplitude modulation

Metalenses are two-dimensional planar metamaterial lenses, which have the advantages of high efficiency and easy integration. However, most metalenses cannot modulate the light intensity, which limits their applications. To deal with it, taking advantage of flexible regulation of the beam amplitude and phase by the metalens, the geometric phase method is selected to design the dual-function metalens. It can effectively eliminate chromatic aberration in a visible light band from 535 nm to 600 nm and achieve amplitude modulation. After transmitting the metalens, the amplitudes of the beam respectively turn into 0.2 and 0.9. In this way, the amount of transmission of metalens in the preset band can be quantitatively controlled. According to the distribution characteristics of light diffraction intensity, the metalens designed can play a dual modulation role of achromatism and interference double-beam equilibrium in the paper, to meet the needs of miniaturization and integration of the optical system. The achromatic and amplitude-modulated metalens will have great application potential in optical holographic imaging and super-resolution focusing.

Investigation on performance of special-shaped 8-quadrature amplitude modulation constellations applied in visible light communication

Light-emitting diode(LED)-based visible light communication(VLC) has become a potential candidate for nextgeneration ultra-high-speed indoor wireless communication. In this paper, four special-shaped 8-quadrature amplitude modulation(QAM) constellations are investigated in a single-carrier VLC system. It is numerically verified and experimentally demonstrated that circular(7,1) shows obvious superiority in the performance of the dynamic range of signal voltage peak-to-peak(vpp) value and bit error rate(BER). Next best is rectangular, followed by triangular; circular(4,4) has the worst performance. A data rate of 1.515 Gbit/s is successfully achieved by circular(7,1) employing a red chip LED over 0.5 m indoor free space transmission below a BER threshold of3.8 × 10^(-3). Compared with circular(4,4), the traditional 8-QAM constellation, circular(7,1) provides a wider dynamic range of signal vpp, a higher data rate, and a longer transmission distance. To the best of our knowledge,this is the first investigation into the performance differences of special-shaped 8-QAM constellations in a highspeed, single-carrier VLC system, and the results comprehensively demonstrate that circular(7,1) is the optimal option.

Wideband Rydberg atom-based receiver for amplitude modulation radio frequency communication

Based on Autler–Townes splitting and AC Stark shifts,we present a Rydberg atom-based receiver for determining the amplitude modulation(AM)frequency among a wideband carrier range utilizing a cesium atomic vapor cell.To verify this approach,we measured the signal-to-noise ratio and the data capacity with a 10 kHz AM frequency in the carrier range from 2 GHz to 18 GHz.Without changing the lasers,the working band can be easily extended to a higher range by optimizing the feed antenna and experimental configurations.

Experimental performance evaluation of quadrature amplitude modulation signal transmission in a silicon microring

We comprehensively characterize the transmission performance of m-ary quadrature amplitude modulation(m-QAM) signals through a silicon microring resonator in the experiment. Using orthogonal frequency-division multiplexing based on offset QAM(OFDM/OQAM) which is modulated with m-QAM modulations, we demonstrate low-penalty data transmission of OFDM/OQAM 64-QAM, 128-QAM, 256-QAM, and 512-QAM signals in a silicon microring resonator. The observed optical signal-to-noise ratio(OSNR) penalties are 1.7 dB for 64-QAM,1.7 dB for 128-QAM, and 3.1 dB for 256-QAM at a bit-error rate(BER) of 2 × 10^(-3) and 3.3 dB for 512-QAM at a BER of 2 × 10^(-2). The performance degradation due to the wavelength detuning from the microring resonance is evaluated, showing a wavelength range of ~0.48 nm with BER below 2 × 10^(-3). Moreover, we demonstrate data transmission of 191.2-Gbit/s simultaneous eight wavelength channel OFDM/OQAM 256-QAM signals in a silicon microring resonator, achieving OSNR penalties less than 2 dB at a BER of 2 × 10^(-2).

A novel DPSS filter optimization scheme to reduce the intrinsic interference of FBMC-QAM systems

In order to reduce the intrinsic interference of the filter bank multicarrier-quadrature amplitude modulation(FBMC-QAM)system,a novel filter optimization scheme based on discrete prolate spheroidal sequences(DPSS)is proposed.Firstly,a prototype filter function based on DPSS is designed,since the eigenvalue can be used as an indicator of the energy concentration of DPSS,so a threshold is set,and the sequence with the most concentrated energy is selected under the threshold,that is,the sequence with the eigenvalue higher than the threshold,and the prototype filter function is rewritten as a weighted sum function of multiple eigenvectors.Under the energy constraints of the filter,the relationship between the eigenvectors and the intrinsic interference function is established,and the function problem is transformed into an optimization problem for the weighted coefficients.Through the interior point method,the most suitable weight is found to obtain the minimum intrinsic interference result.Theoretical analysis and simulation results show that compared with the prototype filters such as Type1 and CaseC,the DPSS filter applying the proposed optimization algorithm can effectively suppress the intrinsic interference of the system and obtain a better bit error rate(BER)performance.

A 532 nm molecular iodine optical frequency standard based on modulation transfer spectroscopy

We report construction of an iodine-stabilized laser frequency standard at 532 nm based on modulation transfer spectroscopy(MTS)technology with good reproducibility.A frequency stability of 2.5×10^(-14)at 1 s averaging time is achieved,and the frequency reproducibility has a relative uncertainty of 3.5×10^(-13),demonstrating the great stability of our setup.The systematic uncertainty of the iodine-stabilized laser frequency standard is evaluated,especially the contribution of the residual amplitude modulation(RAM).The contribution of the RAM in MTS cannot be evaluated directly.To solve this problem,we theoretically deduce the MTS signal with RAM under large modulation depth,and prove that the non-symmetric shape of the MTS signal is directly related to the MTS effect.The non-symmetric shape factor can be calibrated with a frequency comb,and in real experiments,this value can be obtained by least-squares fitting of the MTS signal,from which we can infer the RAMinduced frequency shift.The full frequency uncertainty is evaluated to be 5.3 kHz(corresponding to a relative frequency uncertainty of 9.4×10^(-12)).The corrected transition frequency has a difference from the BIPM-recommended value of 2 kHz,which is within 1σ uncertainty,proving the validity of our evaluation.

amplitude modulation;high-frequency modulation;autoresonance;ion acoustic wave

The generation and control of large amplitude plasma gratings and other plasma structures is of paramount importance for the realization of plasma photonics. Autoresonant excitation of such structures by means of chirped amplitude-modulated lasers has been recently discussed and analyzed theoretically. Here we discuss the parameter space for the realization of such a scheme and describe the laser system that was built towards this goal. We also expand our earlier theoretical study to account for the more realistic case of a moderately focused laser beam, instead of the simplified plane wave approximation.

Numerical Simulation of Water Waves’ Modulational Instability under the Effects of Wind’s Stress and Gravity Force Relaxation

The waves driven by the wind do not move on the water as ordinarily done by sailboats. Indeed, the movement of the waves driven by the wind is more complex than the sailboats’ translation movement that we know. The movement of the wave in our particular case results from the chain-job done by wind’s stress and gravity forces: material is collected upstream (erosion phenomenon) and then deposited on the wave’s summit by the wind. This material deposited on the summit of the wave by the wind is then removed and dispatched on the downstream side of the wave by gravity forces. As always happens in any chain-job: if the wind works faster than gravity forces, great accumulation of material will occur at the summit of the wave that will lead to an increase in its (the wave in this case) height. If conversely the wind works more slowly, a deficit in material delivery will occur and gravity force goes directly to remove material on the wave’s summit and lead to a decrease in its height. In terms of Mechanics, we know that the main obstacle that can seriously disturb the work of the wind is the unavailability of water or so its viscosity. Given the complexity of the process to be studied, it seemed necessary for us to make a use of modulational instability theories such as the standard NLSE in order to better understand the contribution of wind and water viscosity to modulations of driven waves’ amplitudes (or phases): modulations which sometimes can accidentally trigger unpredictable rogue waves.

Joint synchronization estimation based on genetic algorithm for OFDM/OQAM systems

This paper investigates the problem of synchronization for offset quadrature amplitude modulation based orthogonal frequency division multiplexing(OFDM/OQAM) systems based on the genetic algorithm. In order to increase the spectrum efficiency,an improved preamble structure without guard symbols is derived at first. On this basis, instead of deriving the log likelihood function of power spectral density, joint estimation of the symbol timing offset and carrier frequency offset based on the preamble proposed is formulated into a bivariate optimization problem. After that, an improved genetic algorithm is used to find its global optimum solution. Conclusions can be drawn from simulation results that the proposed method has advantages in the joint estimation of synchronization.

A 20.8-Gbps Dual-Carrier Wireless Communication Link in 220-GHz Band

With the successful demonstration of terahertz(THz)high-speed wireless data transmission,the THz frequencies are now becoming a worth candidate for post-5G wireless communications.On the other hand,to bring THz communications a step closer to real scenario application,solving high data rate realtime transmission is also an important issue.This paper describes a 220-GHz solid-state dual-carrier wireless link whose maximum transmission real-time data rates are 20.8 Gbps(10.4 Gbps per channel).By aggregating two carrier signals in the THz band,the contradiction between high real-time data rate communication and low sampling rate analog-to-digital(ADC)and digital-to-analog converter(DAC)is alleviated.The transmitting and receiving front-ends consist of 220-GHz diplexers,220-GHz sub-harmonic mixers based on anti-parallel Schottky barrier diodes,G-band low-noise amplifiers(LNA),WR-4.3 band high-gain Cassegrain antennas,high data rates dual-DAC and-ADC baseband platform and other components.The low-density parity-check(LDPC)encoding is also realized to improve the bit error rate(BER)of the received signal.Modulated signals are centered at 214.4 GHz and 220.6 GHz with-11.9 dBm and-13.4 dBm output power for channel 1 and 2,respectively.This link is demonstrated to achieve 20.8-Gbps real-time data transmission using 16-QAM modulation over a distance of 1030 m.The measured signal to noise ratio(SNR)is 17.3 dB and 16.5 dB,the corresponding BER is 8.6e-7 and 3.8e-7,respectively.Furthermore,4K video transmission is also carried out which is clear and free of stutter.The successful transmission of aggregated channels in this wireless link shows the great potential of THz communication for future wireless high-rate real-time data transmission applications.

Evaluation of Preamble Based Channel Estimation for MIMO-FBMC Systems

Filter-bank multicarrier(FBMC) with offset quadrature amplitude modulation(OQAM) is a candidate waveform for future wireless communications due to its advantages over orthogonal frequency division multiplexing(OFDM) systems. However, because of orthogonality in real field and the presence of imaginary intrinsic interference, channel estimation in FBMC is not as straightforward as OFDM systems especially in multiple antenna scenarios. In this paper, we propose a channel estimation method which employs intrinsic interference cancellation at the transmitter side. The simulation results show that this method has less pilot overhead,less peak to average power ratio(PAPR), better bit error rate(BER), and better mean square error(MSE) performance compared to the well-known intrinsic approximation methods(IAM).

A study of inner-outer interactions in turbulent channel flows by interactive POD

The amplitude and frequency modulation of near-wall flow structures by the large-scale motions in outer regions is studied in turbulent channel flows. The proper orthogonal decomposition(POD) method is applied to investigate the interactions between the near-wall motions and the large-scale flow modes of the outer regions based on two datasets from direct numerical simulation of turbulent channel flows at Reynolds numbers of 550–10 0 0. The fluctuations in the fields u+, v+, w+ and Reynolds shear stress-(uv)+ are studied to understand the mechanism of amplitude and frequency modulation of the nearwall structures by the outer large-scale motions. The amplitude modulation coefficient of the Reynolds shear stress is larger than that of the velocity components. The frequency modulation effect has an opposite influence in the spanwise direction compared to the streamwise direction. The streamwise characteristic frequency increases with increasing large-scale velocity. However, the spanwise characteristic frequency exhibits a decreasing trend with increasing large-scale velocity in the near-wall region.

Real-time in situ detection and quantification of bacteria in the Arctic environment

At present,there are no methods that determine the total micro ial load on an abiotic substra tein real time.The utility of such a capability ranges from sterilization and medical diagnostics tothe search for new microorganisms in the environment and study of their ecological niches.Wereport the development of a hand held,fluorescence detection device and demonstrate its applicability to the field detection of Arctic bacteria,This technology is based on the early pioneering work of Britton Chance which elucidated the intrinsic fiuorescence of a number ofmetabolites and protein cofactors in cels,including reduced pyridine nucleotides,cytochromesand flavins.A PDA controls the device(fluorescence excitation and data collection)and processesthe multiwavelength signals to yield bacterial cell counts,including cstimates of ive cells,deadcells and endospores.Unlike existing methods for cell counting,this method requires no samplecontact or addition of reagents.The use of this technology is demonstrated with in situmea surements of two sub-glacial microbial communities at sites in Palander and colonized surfacerocks in the Bockijord Volcanic Complex during AMASE 2008(Arctic Mars Analog Svalbard Expedition),The total bacterial load on the interrogated sample surfaces ranged from<20 cells/cm to>1o9 cells/cm^(2).

Symbol Detection Based on Temporal Convolutional Network in Optical Communications

Deep learning(DL)is one of the fastest developing areas in artificial intelligence,it has been recently gained studies and application in computer vision,automatic driving,automatic speech recognition,and communication.This paper uses the DL method to design a symbol detection algorithm in receiver for optical communication systems.The proposed DL based method is implemented by a non-causal temporal convolutional network(ncTCN),which is a convolutional neural network and appropriate for sequence processing.Meanwhile,we adopt three methods to realize the training process for multiple signal-to-noise ratios of the AWGN channel.Furthermore,we apply two nonlinear activation functions for the noise robustness to the proposed ncTCN.Without losing generality,we apply the ncTCN-based receiver to the 16-ary quadrature amplitude modulation optical communication system in the simulation experiment.According to the experiment results,the proposed method can obtain some bit error rate performance gain compared to some conventional receivers.

M2-factor of high-power laser beams through a multi-apertured ABCD optical system

Based on the generalized truncated second-order moments,an approximate analytical formula of the beam propagation factor M^2 of high-power laser beams passing through the optical system with multiple hard-edged apertures is deduced.Numerical examples of the beams passing through an aperture-spatial filter are enclosed,and the influences of amplitude modulations(AMs)and phase fluctuations(PFs)on the beam propagation quality of high-power laser beams passing through the multi-apertured ABCD optical system are considered and discussed.It is shown that PFs are able to degrade the beam propagation quality of laser beams more than AMs when the high-power laser beams passing through the aperture-spatial filter,furthermore,one or two aperture-lens optical systems configured appropriate aperture parameters are both able to upgrade the beam propagation quality of high-power laser beams.The M2 factor of Gaussian beam passing through the multi-aperture optical system is a special case in this paper.

A 16-QAM 45-Gbps 7-m Wireless Link Using InP HEMT LNA and GaAs SBD Mixers at 220-GHz-Band

This paper presents a 220-GHz-band 7-m wireless link with a 45-Gbps transmission data rate by using 16 quadrature amplitude modulation(16-QAM).Super-heterodyne transceiver modules are developed for transmission and reception of the modulated signals,which consist of a Schottky barrier diodes(SBD)based sub-harmonic mixer(SHM),an InP HEMT low noise amplifier(LNA),a waveguide band-pass filter(BPF),and a 108-GHz local oscillator(LO)multiplier chain.The transmitter features a peak transmit power of 1.41 dBm,and the IF frequency varies from 5 GHz to 20 GHz.Besides,the receiver features a conversion gain of 9.3 dB in average and a noise temperature of 3052.8 K.The measured results indicate that the transceiver modules enable data transmission of a 45-Gbps 16-QAM signal with Signal-Noise-Ratio(SNR)from 11.59 dB to 15.36 dB in a 7-m line-of-sight channel.

Enhancements of SDR-Based FPGA System for V2X-VLC Communications

This pilot study focuses on a real measurements and enhancements of a software defined radio-based system for vehicle-to everything visible light communication(SDR-V2X-VLC).The presented system is based on a novel adaptive optimization of the feed-forward software defined equalization(FFSDE)methods of the least mean squares(LMS),normalized LMS(NLMS)and QR decomposition-based recursive least squares(QR-RLS)algorithms.Individual parameters of adaptive equalizations are adjusted in real-time to reach the best possible results.Experiments were carried out on a conventional LED Octavia III taillight drafted directly from production line and universal software radio peripherals(USRP)from National Instruments.The transmitting/receiving elements used multistate quadrature amplitude modulation(M-QAM)implemented in LabVIEW programming environment.Experimental results were verified based on bit error ratio(BER),error vector magnitude(EVM)and modulation error ratio(MER).Experimental results of the pilot study unambiguously confirmed the effectiveness of the proposed solution(longer effective communication range,higher immunity to interference,deployment of higher state QAM modulation formats,higher transmission speeds etc.),as the adaptive equalization significantly improved BER,MER and EVM parameters.The best results were achieved using the QR-RLS algorithm.The results measured on deployed QR-RLS algorithm had significantly better Eb/N0(improved by approx.20 dB)and BER values(difference by up to two orders of magnitude).