Amplitudes have been found to be a function of incident angle and offset. Hence data required to test for amplitude variation with angle or offset needs to have its amplitudes for all offsets preserved and not stacked...Amplitudes have been found to be a function of incident angle and offset. Hence data required to test for amplitude variation with angle or offset needs to have its amplitudes for all offsets preserved and not stacked. Amplitude Variation with Offset (AVO)/Amplitude Variation with Angle (AVA) is necessary to account for information in the offset/angle parameter (mode converted S-wave and P-wave velocities). Since amplitudes are a function of the converted S- and P-waves, it is important to investigate the dependence of amplitudes on the elastic (P- and S-waves) parameters from the seismic data. By modelling these effects for different reservoir fluids via fluid substitution, various AVO geobody classes present along the well and in the entire seismic cube can be observed. AVO analysis was performed on one test well (Well_1) and 3D pre-stack angle gathers from the Tano Basin. The analysis involves creating a synthetic model to infer the effect of offset scaling techniques on amplitude responses in the Tano basin as compared to the effect of unscaled seismic data. The spectral balance process was performed to match the amplitude spectra of all angle stacks to that of the mid (26°) stack on the test lines. The process had an effect primarily on the far (34° - 40°) stacks. The frequency content of these stacks slightly increased to match that of the near and mid stacks. In offset scaling process, the root mean square (RMS) amplitude comparison between the synthetic and seismic suggests that the amplitude of the far traces should be reduced relative to the nears by up to 16%. However, the exact scaler values depend on the time window considered. This suggests that the amplitude scaling with offset delivered from seismic processing is only approximately correct and needs to be checked with well synthetics and adjusted accordingly prior to use for AVO studies. The AVO attribute volumes generated were better at resolving anomalies on spectrally balanced and offset scaled data than data delivered from conventional processing. A typical class II AVO anomaly is seen along the test well from the cross-plot analysis and AVO attribute cube which indicates an oil filled reservoir.展开更多
We derive formulae of correction for multi-wave geometric spreading and absorption in layered viscoelastic media, this provides the theoretical foundation for true amplitude compensation of field data and for our sens...We derive formulae of correction for multi-wave geometric spreading and absorption in layered viscoelastic media, this provides the theoretical foundation for true amplitude compensation of field data and for our sensitivity analysis. The imaging matrix at a plane reflector between viscoelastic media can be determined in the frequency domain using linearized reflection coefficients through Born approximation. We quantitatively analyze the sensitivity by studying eigenvalues and eigenvectors of the imaging matrix. The results show that two linear combinations of petrophysical parameters can be determined from the multi-wave AVO inversion in the case of amplitude compensation. Multi-wave AVO contains the information of attenuation in the media. However, the sensitivity of multi-wave AVO inversion to attenuation is small.展开更多
An important component of any CO_2 sequestration project is seismic monitoring for tracking changes in subsurface physical properties,such as velocity and density.Different reservoirs have different amplitude variatio...An important component of any CO_2 sequestration project is seismic monitoring for tracking changes in subsurface physical properties,such as velocity and density.Different reservoirs have different amplitude variation with offset(AVO) responses,which can define underground conditions. In the present paper we investigate walkaway vertical seismic profile(VSP) AVO response to CO_2 injection at the Ketzin site,the first European onshore CO_2 sequestration pilot study dealing with research on geological storage of CO_2.First,we performed rock physics analysis to evaluate the effect of injected CO_2 on seismic velocity using the Biot-Gassmann equation.On the basis of this model,the seismic response for different CO_2 injection saturation was studied using ray tracing modeling.We then created synthetic walkaway VSP data,which we then processed.In contrast,synthetic seismic traces were created from borehole data.Finally,we found that the amplitude of CO_2 injected sand layer with different gas saturations were increased with the offset when compared with the original brine target layer.This is the typical classⅢAVO anomaly for gas sand layer.The AVO responses matched the synthetic seismic traces very well.Therefore,walkaway VSP AVO response can monitor CO_2 distribution in the Ketzin area.展开更多
Although chaotic signals are considered to have great potential applications in radar and communication engineering, their broadband spectrum makes it difficult to design an applicable amplifier or an attenuator for a...Although chaotic signals are considered to have great potential applications in radar and communication engineering, their broadband spectrum makes it difficult to design an applicable amplifier or an attenuator for amplitude conditioning. Moreover, the transformation between a unipolar signal and a bipolar signal is often required. In this paper, a more intelligent hardware implementation based on field programmable analog array (FPAA) is constructed for chaotic systems with complete amplitude control. Firstly, two chaotic systems with complete amplitude control are introduced, one of which has the property of offset boosting with total amplitude control, while the other has offset boosting and a parameter for partial control. Both cases can achieve complete amplitude control including amplitude rescaling and offset boosting. Secondly, linear synchronization is established based on the special structure of chaotic system. Finally, experimental circuits are constructed on an FPAA where the predicted amplitude control is realized through only two independent configurable analog module (CAM) gain values.展开更多
文摘Amplitudes have been found to be a function of incident angle and offset. Hence data required to test for amplitude variation with angle or offset needs to have its amplitudes for all offsets preserved and not stacked. Amplitude Variation with Offset (AVO)/Amplitude Variation with Angle (AVA) is necessary to account for information in the offset/angle parameter (mode converted S-wave and P-wave velocities). Since amplitudes are a function of the converted S- and P-waves, it is important to investigate the dependence of amplitudes on the elastic (P- and S-waves) parameters from the seismic data. By modelling these effects for different reservoir fluids via fluid substitution, various AVO geobody classes present along the well and in the entire seismic cube can be observed. AVO analysis was performed on one test well (Well_1) and 3D pre-stack angle gathers from the Tano Basin. The analysis involves creating a synthetic model to infer the effect of offset scaling techniques on amplitude responses in the Tano basin as compared to the effect of unscaled seismic data. The spectral balance process was performed to match the amplitude spectra of all angle stacks to that of the mid (26°) stack on the test lines. The process had an effect primarily on the far (34° - 40°) stacks. The frequency content of these stacks slightly increased to match that of the near and mid stacks. In offset scaling process, the root mean square (RMS) amplitude comparison between the synthetic and seismic suggests that the amplitude of the far traces should be reduced relative to the nears by up to 16%. However, the exact scaler values depend on the time window considered. This suggests that the amplitude scaling with offset delivered from seismic processing is only approximately correct and needs to be checked with well synthetics and adjusted accordingly prior to use for AVO studies. The AVO attribute volumes generated were better at resolving anomalies on spectrally balanced and offset scaled data than data delivered from conventional processing. A typical class II AVO anomaly is seen along the test well from the cross-plot analysis and AVO attribute cube which indicates an oil filled reservoir.
基金The study is supported by National Project 863 (No. 820-05-02-03).
文摘We derive formulae of correction for multi-wave geometric spreading and absorption in layered viscoelastic media, this provides the theoretical foundation for true amplitude compensation of field data and for our sensitivity analysis. The imaging matrix at a plane reflector between viscoelastic media can be determined in the frequency domain using linearized reflection coefficients through Born approximation. We quantitatively analyze the sensitivity by studying eigenvalues and eigenvectors of the imaging matrix. The results show that two linear combinations of petrophysical parameters can be determined from the multi-wave AVO inversion in the case of amplitude compensation. Multi-wave AVO contains the information of attenuation in the media. However, the sensitivity of multi-wave AVO inversion to attenuation is small.
基金The European Commission,German Federal Ministry of Education and Research,German Federal Ministry of Economics and Technology as well as Research Institute and Industry are gratefully acknowledged for funding and supporting CO2 Storage by Injection into a Natural Storage Site CO2SINK(Project No.502599)
文摘An important component of any CO_2 sequestration project is seismic monitoring for tracking changes in subsurface physical properties,such as velocity and density.Different reservoirs have different amplitude variation with offset(AVO) responses,which can define underground conditions. In the present paper we investigate walkaway vertical seismic profile(VSP) AVO response to CO_2 injection at the Ketzin site,the first European onshore CO_2 sequestration pilot study dealing with research on geological storage of CO_2.First,we performed rock physics analysis to evaluate the effect of injected CO_2 on seismic velocity using the Biot-Gassmann equation.On the basis of this model,the seismic response for different CO_2 injection saturation was studied using ray tracing modeling.We then created synthetic walkaway VSP data,which we then processed.In contrast,synthetic seismic traces were created from borehole data.Finally,we found that the amplitude of CO_2 injected sand layer with different gas saturations were increased with the offset when compared with the original brine target layer.This is the typical classⅢAVO anomaly for gas sand layer.The AVO responses matched the synthetic seismic traces very well.Therefore,walkaway VSP AVO response can monitor CO_2 distribution in the Ketzin area.
基金Project supported by the Startup Foundation for Introducing Talent of Nanjing University of Information Science&Technology,China(Grant No.2016205)the Natural Science Foundation of the Jiangsu Higher Education Institutions of Jiangsu Province,China(Grant No.16KJB120004)+1 种基金the Priority Academic Program Development of Jiangsu Higher Education Institutionsthe Natural Science Foundation of Hebei Province,China(Grant No.A2015108010)
文摘Although chaotic signals are considered to have great potential applications in radar and communication engineering, their broadband spectrum makes it difficult to design an applicable amplifier or an attenuator for amplitude conditioning. Moreover, the transformation between a unipolar signal and a bipolar signal is often required. In this paper, a more intelligent hardware implementation based on field programmable analog array (FPAA) is constructed for chaotic systems with complete amplitude control. Firstly, two chaotic systems with complete amplitude control are introduced, one of which has the property of offset boosting with total amplitude control, while the other has offset boosting and a parameter for partial control. Both cases can achieve complete amplitude control including amplitude rescaling and offset boosting. Secondly, linear synchronization is established based on the special structure of chaotic system. Finally, experimental circuits are constructed on an FPAA where the predicted amplitude control is realized through only two independent configurable analog module (CAM) gain values.