Treatment of methanol wastewater in external circulation anaerobic reactor with different inoculums

In order to guide the inoculums selection for the anaerobic treatment of methanol wastewater in the engineering application,two 7 L bench-scale external circulation (EC) anaerobic reactors were operated to investigate the inoculums of anaerobic granular sludge and anaerobic digested sludge,focusing on the efficiency and process stability.The effect of impact concentration and temperature on the performance was studied.The results demonstrated that anaerobic granular sludge as the inoculums could complete the start-up more rapidly than the anaerobic digested sludge,and above 90% COD removal were achieved at the organic loading rate of 10 to 15 kgCOD/(m3·d).The effect of impact COD on the methanogenic activity of sludge was weak and the removal efficiencies recovered gradually in the two reactors.The COD removal efficiencies reduced swiftly to 50%-60% due to the impact temperature.The results indicated that the complex bacterial groups in anaerobic digested sludge benefited to enhance the reactor's capacity for withstanding the temperature shock at some extent.

Steady performance of a zero valent iron packed anaerobic reactor for azo dye wastewater treatment under variable influent quality

Zero valent iron （ZVI） is expected to help create an enhanced anaerobic environment that might improve the performance of anaerobic treatment. Based on this idea, a novel ZVI packed upflow anaerobic sludge blanket （ZVI-UASB） reactor was developed to treat azo dye wastewater with variable influent quality. The results showed that the reactor was less influenced by increases of Reactive Brilliant Red X-3B concentration from 50 to 1000 mg/L and chemical oxygen demand （COD） from 1000 to 7000 mg/L in the feed than a reference UASB reactor without the ZVI. The ZVI decreased oxidation-reduction potential in the reactor by about 80 mV. Iron ion dissolution from the ZVI could buffer acidity in the reactor, the amount of which was related to the COD concentration. Fluorescence in situ hybridization test showed the abundance of methanogens in the sludge of the ZVI-UASB reactor was significantly greater than that of the reference one. Denaturing gradient gel electrophoresis showed that the ZVI increased the diversity of microbial strains responsible for high efficiency.

Start-up and Performance of a Novel Reactor----Jet Biogas Inter-loop Anaerobic Fluidized Bed

A novel anaerobic reactor, jet biogas inter-loop anaerobic fluidized bed （JBILAFB）, was designed and constructed. The start-up and performance of the reactor was investigated in the Process. of .artificial glucose wastewater treatment. With the wastewater recycle ratio of 2.5 ： 1, the recycled wastewater with biogas could mix sludge and wastewater in the JBILAFB reactor completely. The start-up of the JBILAFB reactor could be completed in less than 70 d through maintenance of hydraulic retention time （HR^I＂） and stepwise increase of feed total organic carbon （TOC） concentration. After the start-up, with the volumetric TOC loadings of 14.3 kg·m ^-3·d^-1, the TOC removal ratio, the effluent pH, and the volatile fatty acids （VFA）/alkalinity of the JBILAFB reactor were more than 80%, close to 7.0 and less than 0.4, respectively. Moreover, CH4 was produced at more than 70% of the theoretical value, The reactor exhibited high stability under the condition of high volumetric TOC loading. Sludge granules in the JBILAFB reactor were developed during the start-up and their sizes were enlarged with the stepwise increase of volumetric TOC loadings from 0.8 kg.m^-3.d ^-1 to 14.3 kg.m^-3.d^-1. Granules, an offwhite color and a similar spherical shape, were mainly comprised of global-like bacteria. These had good methanogenic activity and settleability, which were formed probably through adhesion of the bacteria. Some inorganic metal compounds such as Fe, Ca, Mg, Al, etc. were advantageous to the formation of the granules.

The effect of continuous Ni(Ⅱ) exposure on the organic degradation and soluble microbial product(SMP) formation in two-phase anaerobic reactor

A two-phase anaerobic reactor fed with glucose substrate（3 g chemical oxygen demand（COD）/L） was used to investigate the effects of toxic metals on the degradation of organics and the soluble microbial product（SMP） formation. Low concentrations of Ni（II）（5 and10 mg/L） promoted the acid phase, whereas high concentrations（15, 20, and 25 mg/L）exhibited an inhibitory effect on, but did not alter the fermentative method, which mainly involved the fermentation of propionic acid. The methanogenic microorganism exhibited a strong capability adapting constantly increased Ni（II） levels. The acid phase was an accumulation stage of SMP. In the absence of Ni（II）, the high-molecular-weight material in the effluent SMP mainly contained polysaccharide, tryptophan, and casein. Methanogens metabolized most of the polysaccharide, the whole tryptophan content, and part of the casein, leading to the presence of humic acid and protein in effluent. After Ni（II） dosage, the protein and polysaccharide of the acid phase increased, and tryptophan changed, while casein remained stable. More protein than polysaccharide was produced, suggesting the prominent function of protein when addressing the negative effect of toxic metals. The analysis of DNA confirmed the change of bacterial activity.

Effects of operational factors on soluble microbial products in a carrier anaerobic baffled reactor treating dilute wastewater

The effects of feed strength, hydraulic residence time （HRT）, and operational temperatures on soluble microbial product （SMP） production were investigated, to gain insights into the production mechanism. A carrier anaerobic baffled reactor （CABR） treating dilute wastewater was operated under a wide range of operational conditions, namely, feed strengths of 300-600 mg/L, HRTs of 9- 18 h, and temperatures of 10-28℃. Generally, SMP production increased with increasing feed strength and decreasing temperature. At high temperature （28℃）, SMP production increased with decreasing HRT. As the temperature was decreased to 18 and 10℃, the SMP production was at its peak for 12 h HRT. Therefore, temperature could be an important determinant of SMP production along with HRT. A higher SMP to soluble chemical oxygen demand （SCOD） ratio was found at high temperature and long HRT because of complete volatile fatty acid degradation. SMP accounted for 50%-75% of the SCOD in the last chamber of the CABR. As a secondary metabolite, some SMP could be consumed at lower feed strength.

Effects of Temperature and Hydraulic Residence Time (HRT) on Treatment of Dilute Wastewater in a Carrier Anaerobic Baffled Reactor

Objective To examine the effect of hydraulic residence time （HRT） on the performance and stability, to treat dilute wastewater at different operational temperatures in a carrier anaerobic baffled reactor （CABR）, and hence to gain a deeper insight into microbial responses to hydraulic shocks on the base of the relationships among macroscopic performance, catabolic intermediate, and microcosmic alternation. Methods COD, VFAs, and microbial activity were detected with constant feed strength （300 mg/L） at different HRTs （9-18 h） and temperatures （10℃-28℃） in a CABR. Results The removal efficiencies declined with the decreases of HRTs and temperatures. However, the COD removal load was still higher at short HRT than at long HRT. Devastating reactor performance happened at temperature of 10℃ and at HRT of 9 h. HRTs had effect on the VFAs in the reactor slightly both at high and low temperatures, but the reasons differed from each other. Microbial activity was sensitive to indicate changes of environmental and operational parameters in the reactor. Conclusion The CABR offers to certain extent an application to treat dilute wastewater under a hydraulic-shock at temperatures from 10℃to 28℃.

Hydrodynamic characteristics of a four-compartment periodic anaerobic baffled reactor

Periodic anaerobic baffled reactor （PABR） is a novel reactor based on the design concept of anaerobic baffled reactor （ABR）. Residence time distribution （RTD） studies on both clean and working reactors at the same hydraulic residence time （HRT） of 2 d were carded out to investigate the dead spaces and mixing patterns in PABRs at different organic loading rates （OLRs） in various switching manners and frequencies. The results showed that the fraction of dead space in PABR was similar to that in ABR, which was low in comparison with other reactor designs. Dead space may be divided into two categories, hydraulic and biological. In RTD studies without biomass, the hydraulic dead space in the PABR run in an ＂every second＂ switching manner with T = 2 d was the lowest whereas that in the PABR run in a T = ∞ （ABR） switching manner was the highest. The same trend was obtained with the total dead space in RTD studies with biomass no matter what the OLR was. Biological dead space was the major contributor to dead space but affected decreasingly at higher OLR whichever switching manner the PABR run in. The flow patterns within the PABRs were intermediate between plug-flow and perfectly mixed under all the conditions tested,

Pretreatment of coking wastewater using anaerobic sequencing batch reactor (ASBR)

A laboratory-scale anaerobic sequencing batch reactor (ASBR) was used to pretreat coking wastewater. Inoculated anaerobic granular biomass was acclimated for 225 d to the coking wastewater, and then the biochemical methane potential (BMP)of the coking wastewater in the acclimated granular biomass was measured. At the same time, some fundamental technological factors, such as the filling time and the reacting time ratio (tf/tr), the mixing intensity and the intermittent mixing mode, that affect anaerobic pretreatment of coking wastewater with ASBR, were evaluated through orthogonal tests. The COD removal efficiency reached 38％～50％ in the stable operation period with the organic loading rate of 0.37～0.54 kg COD/(m3.d) at the optimum conditions of tf/tr, the mixing intensity and the intermittent mixing mode. In addition, the biodegradability of coking wastewater distinctly increased after the pretreatment using ASBR. At the end of the experiment, the microorganism forms on the granulated sludge in the ASBR were observed using SEM (scanning electron microscope) and fluoroscope. The results showed that the dominant microorganism on the granular sludge was Methanosaeta instead of Methanosarcina dominated on the inoculated sludge.

Cd^(2+) removal from wastewater by sulfate reducing bacteria with an anaerobic fluidized bed reactor

A process of treatment for containing Cd 2+ wastewater by sulfate reducing bacteria with upflow anaerobic fluidized bed reactor has been studied. When the concentration of COD and Cd 2+ in the influent were 270 5mg/L and 100mg/L respectively and hydraulic retention time was 4 hours, the removal rate of COD and Cd 2+ were higher than 73 8% and 99 8% respectively. The reactor can treat as high as 1000mg/L of concentration of Cd 2+ . The highest removal velocity rate of Cd 2+ reached 2999 1mg/(L·d). And the possible relationship between sulfate reducing bacteria and methanogenic bacteria was discussed.

Application of Froude dynamic similitude in anaerobic baffled reactors to prediction of hydrodynamic characteristics of a prototype reactorusing a model reactor

An anaerobic baffled reactor is a system developed in recent decades and has been used as part of the treatment of high-strength wastewater. Since the function of this system is based on its hydrodynamic features, hydrodynamics and the regime of the flow through the reactor are crucial. In this study, a prototype reactor with eight chambers, which had a total volume of 48 L, and a model reactor, whose dimensions were half of those of the prototype reactor, were used. The Froude dynamic similitude in these reactors was investigated. The results show that the curve dimensionless variances were 0.089 and 0.096 for the prototype and model reactors, respectively, the short-circuiting indices were 0.483 and 0.489 for the prototype and model reactors, respectively, the effective volume and short-circuiting index measurement errors were both 1%, the hydraulic efficiency error was 2%, and the Peclet and dispersion number errors were both 7%. Most of the compared indices were close to one another in value. Therefore, the model reactor can be used based on the Froude dynamic similitude to determine hydrodynamic charac-teristics of a baffled reactor at a full scale.

In-depth observations of fermentative hydrogen production from liquid swine manure using an anaerobic sequencing batch reactor

In this study,experiments were designed to reveal in-depth information of the effect of pH and hydraulic retention time（HRT）on biohydrogen fermentation from liquid swine manure supplemented with glucose using an Anaerobic Sequencing Batch Reactor（ASBR）System.Five values of HRT（8,12,16,20,and 24 h）were first tested and the best HRT determined was further studied at five p H levels（4.4,4.7,5.0,5.3,and 5.6）.The results showed that for HRT 24 h,there was a dividing H2 content（around 37%）related to the total biogas production rate for the ASBR System running at p H 5.0.When the H2 content went beyond 37%,an appreciable decline in biogas production rate was observed,implying that there might exist an H2 content limit in the biogas.For other HRTs（8 through 20 h）,an average H2 content of 42%could be achieved.In the second experiment（HRT 12 h）,the highest H2 content（35%）in the biogas was found to be associated with p H 5.0.The upswing of p H from 5.0 to 5.6 had a significantly more impact on biogas H2 content than the downswing of p H from5.0 to 4.3.The results also indicated good linear relationships of biogas and H2 production rates with HRT（r=0.9971 and0.9967,respectively）.Since the optimal ASBR operating conditions were different for the biogas/H2 production rates and the H2 yield,a compromised combination of the running parameters was determined to be HRT 12 h and pH 5.0 in order to achieve good biogas/H2 productions.

Anaerobic-aerobic processes for the treatment of textile dyeing wastewater containing three commercial reactive azo dyes:Effect of number of stages and bioreactor type

In this study,the effect of number of stages and bioreactor type on the removal performance of a sequential anaerobic-aerobic process employing activated sludge for the treatment of a simulated textile dyeing wastewater containing three commercial reactive azo dyes was considered.Two stage processes performed better than one stage ones,both in terms of overall organic and color removal,as well as the higher contribution of anaerobic stage to the overall removal performance,thereby making them a more energy efficient option.The employment of a moving bed sequencing batch biofilm reactor,which uses both suspended and attached biomass,for the implementation of the anaerobic stage of the process,was compared with a sequencing batch reactor that only employs suspended biomass.The results showed that,although there was no meaningful difference in biomass concentration between the two bioreactors,the latter reactor had better performance in terms of chemical oxygen demand(COD)removal efficiency and rate and color removal rate.Further exploratory tests revealed a difference between the roles of suspended and attached bacterial populations,with the former yielding better color removal whilst the latter had better COD removal performance.The sequential anaerobic–aerobic process,employing an aerobic membrane bioreactor in the aerobic stage resulted in COD and color removal of 77.1±7.9%and 79.9±1.5%,respectively.The incomplete COD and color removal was attributed to the presence of soluble microbial products in the effluent and the autoxidation of dye reduction metabolites,respectively.Also,aerobic partial mineralization of the dye reduction metabolites,was experimentally observed.

A review of modified and hybrid anaerobic baffled reactors for industrial wastewater treatment

This review discusses high-strength wastewater treatment using anaerobic baffled reactors(ABRs)and modified ABRs.The research findings and applications of ABRs in treating various types of high strength wastewater generated from food companies,livestock,and industries were summarized and reported.Measurement parameters affecting the performance of ABRs are briefly discussed.The state-of-the-art laboratory studies are compiled and critically reviewed.Critical challenges and suggestions for future investigation are also addressed.

Microbiological Characteristics of Anaerobic Granular Sludge in Hybrid Anaerobic Baffled Reactor

Anaerobic granular sludge is of key importance for highly effective operation of hybrid anaerobic baffled reactor(HABR).An observation and analysis on the composition of anaerobic granular sludge in each separation compartment of HABR was conducted by using scanning electron microscope(SEM)and molecular biotechnology,and specific methanogenic activity(SMA)and coenzyme F420 content were determined.It was indicated that the disparity of microbial composition was significant among these separation compartments of HABR,and the HABR encouraged phase separation.The results show the understanding of microbiological characteristics of anaerobic granular sludge in HABR is helpful for cultivating granular sludge,which ensures the effective operation of the reactor.

Hydraulic modeling of an anaerobic expanded bed reactor for municipal sewage treatment

Anaerobic expanded bed reactor(AEBR) is mostly used for the treatment of fairly low strength wastewaters. Since the performance of AEBR largely depends on its hydraulic characteristics, residence time distribution(RTD) method is commonly used for investigation of the hydraulic characteristics of AEBR under different ascending velocity of mixed liquor. In this paper, a pilot-scale AEBR reactor is investigated for treatment of municipal sewage in which lithium chloride is used as a tracer. The results show that the AEBR could be considered as the superimposition of several constant stirred tank reactors(CSTR) and the increase of hydraulic up-flow velocity could increase the number of the CSTR and decrease the volume rate of the dead zone. The optimal up-flow velocity of the investigated AEBR was approximately 1.9 m/h in the municipal sewage treatment.

Design and study on hydraulics characteristic of multistage anaerobic granular sludge reactor

This article provides some ideas about several key parameters in design of multistage anaerobic granular sludge reactor （MA（iSR）, and an MAGSR was designed by these ideas. By experiment this paper studies the productivity of biogas and circulation flux of wastewater. The results indicate that in certain scope the circulation flux increases in linear with the biogas productivity rise. The result by the experiment and by the hydraulics model about the circulation flux is different. The circulation flux can be several or more than ten times of the influence.

Treatment of methanol wastewater with two-stage and two-phase anaerobic process

The two-stage and two-phase anaerobic process (TSTP) composed of hydrolytic acidification reactor,first-order and second-order external circulation anaerobic reactors (EC) was taken to treat methanol wastewater. Test results show that TSTP process is quick start-up in 51 d, and the maximum VFA of hydrolytic acidification reactor effluent reaches 876 mg/L. Under the condition of volume loading of 6.56 kgCOD/m3·d, COD removal rate of the first-order EC reactor is about 85%, and under the condition of volume loading of 1.02 kgCOD/m3·d, COD removal rate of the second-order EC reactor is about 50%. When the inflow COD of TSTP process is between 7000-11000 mg/L, its effluent COD is lower than 600 mg/L. In the biological conversion process of methanol into methane,the production of acetic acids as an intermediate product can be ignored and the direct production of methane from methanol is predominant.

Characteristics of high-sulfate wastewater treatment by two-phase anaerobic digestion process with Jet-loop anaerobic fluidized bed

A new anaerobic reactor, Jet-loop anaerobic fluidized bed （JLAFB）, was designed for treating high-sulfate wastewater. The treatment characteristics, including the effect of influent COD/SO42 ratio and alkalinity and sulfide inhibition in reactors, were discussed for a JLAFB and a general anaerobic fiuidized bed （AFB） reactor used as sulfate-reducing phase and methane-producing phase, respectively, in two-phase anaerobic digestion process. The formation of granules in the two reactors was also examined. The results indicated that COD and sulfate removal had different demand of influent COD/SO4^2- ratios. When total COD removal was up to 85%, the ratio was only required up to 1.2, whereas, total sulfate removal up to 95% required it exceeding 3.0. The alkalinity in the two reactors increased linearly with the growth of influent alkalinity. Moreover, the change of influent alkalinity had no significant effect on pH and volatile fatty acids （VFA） in the two reactors. Influent alkalinity kept at 400-500 mg/L could meet the requirement of the treating process. The JLAFB reactor had great advantage in avoiding sulfide and free-H2S accumulation and toxicity inhibition on microorganisms. When sulfate loading rate was up to 8. 1 kg/（m^3.d）, the sulfide and free-H2S concentrations in JLAFB reactor were 58.6 and 49.7 mg/L, respectively. Furthermore, the granules, with offwhite color, ellipse shape and diameters of 1.0-3.0 mm, could be developed in JLAFB reactor. In granules, different groups of bacteria were distributed in different layers, and some inorganic metal compounds such as Fe, Ca, Mg etc. were found.

Effect of Sodium Ion Concentration on Hydrogen Production from Sucrose by Anaerobic Hydrogen-producing Granular Sludge

This work evaluated the effects of sodium ion concentration, ranging from 0 to 16000mg·L^-1（Na^＋）, on the conversion of sucrose to hydrogen by a high-activity anaerobic hydrogen-producing granular sludge. At the optimum sodium ion concentration [1000-2000mg·L^-1（Na^＋）] for hydrogen production at 37℃, the maximum sucrose degradation rate, the specific hydrogen production yield and the specific hydrogen production rate were 393.6-413.1mg·L^-1.h^-1, 28.04-28.97ml·g^-1, 7.52-7.83ml·g^-1.h^-1, respectively. The specific production yields of propionate, butyrate and valerate decreased with increasing sodium ion concentration, whereas the specific acetate production yield increased, meanwhile the specific production yields of ethanol and caproate were less than 55.3 and 12.6mg·g^-1, respectively. The hybrid fermentation composition gradually developed from acetate, propionate and butyrate to acetate with the increase in sodium ion concentration.

Correlation of anaerobic ammonium oxidation and denitrification

The feasibility of the nitrous organic wastewater treated was studied in seven anaerobic sequencing batch reactors（ASBRs） （0^#-6^#） which had been run under stable anaerobic ammonium oxidation （Anammox）. By means of monitoring and data analysis of COD, NH4^#-N, NO2^--N, NO3^--N and pH, and of microbial test, the results revealed that the optimal Anammox performance was achieved from 2^# reactor in which COD/NH4^＋ -N was 1.65, Anammox bacteria and denitrification bacteria could coexist, and Anammox reaction and denitrification reaction could occur simultaneously in the reactors. The ratio of NH4^＋-N consumed ： NO2^- -N consumed ： NO3^- -N produced was 1：1.38：0.19 in 0^# reactor which was not added glucose in the wastewater. When different ratio of COD and NH4^＋-N was fed for the reactors, the ratio of NO2^- -N consumed： NH4^＋-N consumed was in the range of 1.51-2.29 and the ratio of NO;-N produced： NH4^＋ -N consumed in the range of 0 -0.05.