Thelinearityofcurrent-steeringdigital-to-analogconverters（DACs）atlowsignalfrequenciesismainly limited by matching properties of current sources, so large-size current source arrays are widely used for better matchin...Thelinearityofcurrent-steeringdigital-to-analogconverters（DACs）atlowsignalfrequenciesismainly limited by matching properties of current sources, so large-size current source arrays are widely used for better matching. This, however, results in large gradient errors and parasitic capacitance, which degrade the spurious free dynamic range（SFDR） for high-frequency signals. To overcome this problem, calibration is an effective method.In this paper, a digital background calibration technique for current-steering DACs is presented and verified by a 14-bit DAC in a 0.13 m standard CMOS process. The measured differential nonlinearity（DNL） and integral nonlinearity（INL） are 0.4 LSB and 1.2 LSB, respectively. At 500-MS/s, the SFDR is 70 dB and 50.3 dB for signals of 5.4 MHz and 224 MHz, respectively. The core area is 0.69 mm2and the power consumption is 165 mW from a mixed power supply with 1.2 V and 3.3 V.展开更多
Beam measurement is very important for accelerators. In this paper, modern digital beam measurement techniques based on I Q（In-phase ＆ Quadrature-phase） analysis are discussed. Based on this method and highspeed hi...Beam measurement is very important for accelerators. In this paper, modern digital beam measurement techniques based on I Q（In-phase ＆ Quadrature-phase） analysis are discussed. Based on this method and highspeed high-resolution analog-to-digital conversion, we have completed three beam measurement electronics systems designed for the China Spallation Neutron Source（CSNS）, Shanghai Synchrotron Radiation Facility（SSRF）, and Accelerator Driven Sub-critical system（ADS）. Core techniques of hardware design and real-time system calibration are discussed, and performance test results of these three instruments are also presented.展开更多
基金Project supported by the National Natural Science Foundation of China(Nos.60976024,61306029)the National High Technology Research and Development Program of China(No.2013AA014103)
文摘Thelinearityofcurrent-steeringdigital-to-analogconverters（DACs）atlowsignalfrequenciesismainly limited by matching properties of current sources, so large-size current source arrays are widely used for better matching. This, however, results in large gradient errors and parasitic capacitance, which degrade the spurious free dynamic range（SFDR） for high-frequency signals. To overcome this problem, calibration is an effective method.In this paper, a digital background calibration technique for current-steering DACs is presented and verified by a 14-bit DAC in a 0.13 m standard CMOS process. The measured differential nonlinearity（DNL） and integral nonlinearity（INL） are 0.4 LSB and 1.2 LSB, respectively. At 500-MS/s, the SFDR is 70 dB and 50.3 dB for signals of 5.4 MHz and 224 MHz, respectively. The core area is 0.69 mm2and the power consumption is 165 mW from a mixed power supply with 1.2 V and 3.3 V.
基金Supported by National Natural Science Foundation of China(11205153,10875119)Knowledge Innovation Program of the Chinese Academy of Sciences(KJCX2-YW-N27)+1 种基金the Fundamental Research Funds for the Central Universities(WK2030040029)the CAS Center for Excellence in Particle Physics(CCEPP)
文摘Beam measurement is very important for accelerators. In this paper, modern digital beam measurement techniques based on I Q（In-phase ＆ Quadrature-phase） analysis are discussed. Based on this method and highspeed high-resolution analog-to-digital conversion, we have completed three beam measurement electronics systems designed for the China Spallation Neutron Source（CSNS）, Shanghai Synchrotron Radiation Facility（SSRF）, and Accelerator Driven Sub-critical system（ADS）. Core techniques of hardware design and real-time system calibration are discussed, and performance test results of these three instruments are also presented.
