This paper first illustrates S.D. Krashen's language acquisition theory, especially two of his five hypotheses as well as the guidance of these theories towards the teaching of business English reading for student...This paper first illustrates S.D. Krashen's language acquisition theory, especially two of his five hypotheses as well as the guidance of these theories towards the teaching of business English reading for students majored in business English.展开更多
With the development of current electronic technology, numerous high-speed data acquisition systems provide a variety of potential benefits. This article describes a high-speed data acquisition system which consists o...With the development of current electronic technology, numerous high-speed data acquisition systems provide a variety of potential benefits. This article describes a high-speed data acquisition system which consists of ECL logic and TTL logic devices, samples and stores data with a 1 GHz clock. This system is accomplished easily and works stably. A performance test of this system has been undertaken and the results show that the effective number of bits （ENOB） is more than 6.5 bits.展开更多
The principle and accuracy of 3-D coordinates acquisition using one single camera and the Aided Measuring Probe(AMP) are discussed in this paper. Using one single camera and one AMP which has several embedded targets ...The principle and accuracy of 3-D coordinates acquisition using one single camera and the Aided Measuring Probe(AMP) are discussed in this paper. Using one single camera and one AMP which has several embedded targets and one tip with known coordinates, the single camera′s orientation and location can be calculated. After orientation, the global coordinate system is obtained. During measurement, the camera is fixed firstly, then the AMP is held and the feature point is touched.The camera is triggered lastly. The position and orientation of the AMP are therefore calculated from the size and position of its image on the sensor. Since the tip point of AMP has known relation with the embedded targets, the feature point can be measured. Tests show that the accuracy of length measurement is 0.2 mm and accuracy for flatness measurement in XSY-plane is 0.1 mm.展开更多
Presented in this paper is the development of the driver for the data acquisition card with a peripheral component interconnection （PCI） local bus on the ion cyclotron range of frequency heating （1CRH） system. The...Presented in this paper is the development of the driver for the data acquisition card with a peripheral component interconnection （PCI） local bus on the ion cyclotron range of frequency heating （1CRH） system. The driver is mainly aimed at the embedded VxWorks system （real-time operating system） which is widely used in various fields of real-time systems. An efficient way is employed to develop this driver, which will advance the real-time control of the ICRH system on the experimental advanced superconductor tokamak （EAST）. The driver is designed using the TORNADO integrated development environment （IDE）, and implemented in C plus language. The details include the hardware configuration, analogue/digital （A/D） and digital/analogue （D/A） conversion, input and output （I/O） operation of the driver to support over five cards. The data acquisition card can be manipulated in a low-level program and meet the requirements of A/D conversion and D/A outputs.展开更多
The main targets of seismic exploration research in Leijia carbonatite tight sandstone oil area of Liaohe depression are thin reservoirs prediction and minor faults identification, which is one of the important repres...The main targets of seismic exploration research in Leijia carbonatite tight sandstone oil area of Liaohe depression are thin reservoirs prediction and minor faults identification, which is one of the important representatives of complex exploration objects in Liaohe depression. High precision 3D seismic exploration has significantly improved the ability of thin reservoirs prediction and minor faults identification of this area. Reducing the cost of high precision 3D seismic exploration through optimizing the acquisition parameters is very important for the next step exploration and development of Liaohe depression and similar areas. Based on high precision 3D seismic acquisition data in Leijia tight sandstone oil area, multiple sub-geometries are obtained with different bin sizes, different folds, different aspect ratio, different line intervals by extracting receiver points and shot points, and PSTM processing is performed respectively, obtained PSTM datasets of the sub-geometries, extract time slices, amplitude slices along the layer, coherent slices and so on. We evaluate the data results of the sub-geometries from the aspects of signal-to-noise ratio, thin reservoirs resolution, acquisition footprint and so on. Considering the exploration cost and data effect of each sub-geometry, the optimal direction of the main parameters of high precision seismic exploration in Liaohe depression is put forward, and the acquisition effect of adjacent area by the optimized parameters is given.展开更多
According to the actual observation conditions of the Yangtze River valley from Anqing city to Maanshan city,we designed the 3D acquisition geometry,and applied the multi-scale checkerboard semblance analysis to asses...According to the actual observation conditions of the Yangtze River valley from Anqing city to Maanshan city,we designed the 3D acquisition geometry,and applied the multi-scale checkerboard semblance analysis to assess the preliminary resolution of the designed observation.The checkerboard semblance tests use the refraction and reflection travel-time simultaneous inversion algorithm to quantitatively provide both resolution assessment of velocity structure and Moho topography.The multi-scale checker-board semblance recovery results show that while the chec-kerboard semblance threshold value is 0.5,the preliminary resolution of the designed acquisition geometry is better than 10 km in the upper crust(the depth is less than 10 km),around 15 km in the mid-crust(the depth is 10?25 km),and better than 20 km in the lower crust(the depth is 25?33 km).The preliminary tomographic resolution for the Moho topography is about 20 km in the ray-path coverage area beneath the acquisition geometry.While the checkerboard semblance threshold value is 0.75,the preliminary resolution is 20 km in the upper crust,around 20?25 km in the mid-crust and 25 km in the lower crust.And the preliminary tomographic resolution for the Moho topography is better than 30 km in the ray-path coverage area beneath the acquisition geometry.These non-linear checkerboard tests reveal that the designed acquisition geometry is suitable to image the crustal velocity structure of the Yangtze River valley in the Anhui province.展开更多
This paper discusses the chief techniques and design principles of an ultra-high speed and dual-channel data acquisition card based on PXI bus, using FPGA (Field Programmable Gate Array) as logic controller cell. The ...This paper discusses the chief techniques and design principles of an ultra-high speed and dual-channel data acquisition card based on PXI bus, using FPGA (Field Programmable Gate Array) as logic controller cell. The instmment consists of pre-pro- cess circuit, A/D converter, SDRAM (Synchronous Dynamic random access memory), and control circuit integrated in FPGA. It can achieve allowing up to 1000MHz real-time sampling rate. The test result indicates that the system works normally and the system design is successful.展开更多
This paper deals with a binocular 3-D computer vision system based on the hierarchicalmatching of edge features, Frei and Chen operator is used to extract the edge. The averagegradients of an image obtained by two iso...This paper deals with a binocular 3-D computer vision system based on the hierarchicalmatching of edge features, Frei and Chen operator is used to extract the edge. The averagegradients of an image obtained by two isotropic operators are non-equal quantized andthresholded in an angle, Edge features are extracted after passing a preemphasis transferfunction which can equalize, the noise affection. Binary edge images are decomposed into apyramid structure which is stored and searched using llliffe’s location method. Corre-sponding points are used to determine the range data using triangulation based on an improvedTrivedi’s formula. In calibration the authors set the optical axes of the two cameras parallelto simplify the calculation, A 3 rd order Householder transform is used to solve the compati-ble coupled equations.展开更多
文摘This paper first illustrates S.D. Krashen's language acquisition theory, especially two of his five hypotheses as well as the guidance of these theories towards the teaching of business English reading for students majored in business English.
文摘With the development of current electronic technology, numerous high-speed data acquisition systems provide a variety of potential benefits. This article describes a high-speed data acquisition system which consists of ECL logic and TTL logic devices, samples and stores data with a 1 GHz clock. This system is accomplished easily and works stably. A performance test of this system has been undertaken and the results show that the effective number of bits （ENOB） is more than 6.5 bits.
文摘The principle and accuracy of 3-D coordinates acquisition using one single camera and the Aided Measuring Probe(AMP) are discussed in this paper. Using one single camera and one AMP which has several embedded targets and one tip with known coordinates, the single camera′s orientation and location can be calculated. After orientation, the global coordinate system is obtained. During measurement, the camera is fixed firstly, then the AMP is held and the feature point is touched.The camera is triggered lastly. The position and orientation of the AMP are therefore calculated from the size and position of its image on the sensor. Since the tip point of AMP has known relation with the embedded targets, the feature point can be measured. Tests show that the accuracy of length measurement is 0.2 mm and accuracy for flatness measurement in XSY-plane is 0.1 mm.
文摘Presented in this paper is the development of the driver for the data acquisition card with a peripheral component interconnection （PCI） local bus on the ion cyclotron range of frequency heating （1CRH） system. The driver is mainly aimed at the embedded VxWorks system （real-time operating system） which is widely used in various fields of real-time systems. An efficient way is employed to develop this driver, which will advance the real-time control of the ICRH system on the experimental advanced superconductor tokamak （EAST）. The driver is designed using the TORNADO integrated development environment （IDE）, and implemented in C plus language. The details include the hardware configuration, analogue/digital （A/D） and digital/analogue （D/A） conversion, input and output （I/O） operation of the driver to support over five cards. The data acquisition card can be manipulated in a low-level program and meet the requirements of A/D conversion and D/A outputs.
文摘The main targets of seismic exploration research in Leijia carbonatite tight sandstone oil area of Liaohe depression are thin reservoirs prediction and minor faults identification, which is one of the important representatives of complex exploration objects in Liaohe depression. High precision 3D seismic exploration has significantly improved the ability of thin reservoirs prediction and minor faults identification of this area. Reducing the cost of high precision 3D seismic exploration through optimizing the acquisition parameters is very important for the next step exploration and development of Liaohe depression and similar areas. Based on high precision 3D seismic acquisition data in Leijia tight sandstone oil area, multiple sub-geometries are obtained with different bin sizes, different folds, different aspect ratio, different line intervals by extracting receiver points and shot points, and PSTM processing is performed respectively, obtained PSTM datasets of the sub-geometries, extract time slices, amplitude slices along the layer, coherent slices and so on. We evaluate the data results of the sub-geometries from the aspects of signal-to-noise ratio, thin reservoirs resolution, acquisition footprint and so on. Considering the exploration cost and data effect of each sub-geometry, the optimal direction of the main parameters of high precision seismic exploration in Liaohe depression is put forward, and the acquisition effect of adjacent area by the optimized parameters is given.
基金The study is supported by National Natural Science Foundation of China(No.41774071).
文摘According to the actual observation conditions of the Yangtze River valley from Anqing city to Maanshan city,we designed the 3D acquisition geometry,and applied the multi-scale checkerboard semblance analysis to assess the preliminary resolution of the designed observation.The checkerboard semblance tests use the refraction and reflection travel-time simultaneous inversion algorithm to quantitatively provide both resolution assessment of velocity structure and Moho topography.The multi-scale checker-board semblance recovery results show that while the chec-kerboard semblance threshold value is 0.5,the preliminary resolution of the designed acquisition geometry is better than 10 km in the upper crust(the depth is less than 10 km),around 15 km in the mid-crust(the depth is 10?25 km),and better than 20 km in the lower crust(the depth is 25?33 km).The preliminary tomographic resolution for the Moho topography is about 20 km in the ray-path coverage area beneath the acquisition geometry.While the checkerboard semblance threshold value is 0.75,the preliminary resolution is 20 km in the upper crust,around 20?25 km in the mid-crust and 25 km in the lower crust.And the preliminary tomographic resolution for the Moho topography is better than 30 km in the ray-path coverage area beneath the acquisition geometry.These non-linear checkerboard tests reveal that the designed acquisition geometry is suitable to image the crustal velocity structure of the Yangtze River valley in the Anhui province.
文摘This paper discusses the chief techniques and design principles of an ultra-high speed and dual-channel data acquisition card based on PXI bus, using FPGA (Field Programmable Gate Array) as logic controller cell. The instmment consists of pre-pro- cess circuit, A/D converter, SDRAM (Synchronous Dynamic random access memory), and control circuit integrated in FPGA. It can achieve allowing up to 1000MHz real-time sampling rate. The test result indicates that the system works normally and the system design is successful.
文摘This paper deals with a binocular 3-D computer vision system based on the hierarchicalmatching of edge features, Frei and Chen operator is used to extract the edge. The averagegradients of an image obtained by two isotropic operators are non-equal quantized andthresholded in an angle, Edge features are extracted after passing a preemphasis transferfunction which can equalize, the noise affection. Binary edge images are decomposed into apyramid structure which is stored and searched using llliffe’s location method. Corre-sponding points are used to determine the range data using triangulation based on an improvedTrivedi’s formula. In calibration the authors set the optical axes of the two cameras parallelto simplify the calculation, A 3 rd order Householder transform is used to solve the compati-ble coupled equations.
