VCSEL Injection locking is demonstrated to increase laser bandwidth and reduce non-linearity and chirp. All these properties enhance analog and digital modulation performance.
Actively cooled thermal protection system has great influence on the engine of a hypersonic vehicle, and it is significant to obtain the thermal and stress distribution in the system. So an analytic estimation and num...Actively cooled thermal protection system has great influence on the engine of a hypersonic vehicle, and it is significant to obtain the thermal and stress distribution in the system. So an analytic estimation and numerical modeling are performed in this paper to investigate the behavior of an actively cooled thermal protection system. The analytic estimation is based on the electric analogy method and finite element analysis（FEA） is applied to the numerical simulation. Temperature and stress distributions are obtained for the actively cooled channel walls with three kinds of nickel alloys with or with no thermal barrier coating（TBC）. The temperature of the channel wall with coating has no obvious difference from the one with no coating, but the stress with coating on the channel wall is much smaller than that with no coating. Inconel X-750 has the best characteristics among the three Ni-based materials due to its higher thermal conductivity, lower elasticity module and greater allowable stress. Analytic estimation and numerical modeling results are compared with each other and a reasonable agreement is obtained.展开更多
The fifth generation mobile communication（5G） systems can provide Gbit/s data rates from massive multiple-input multiple-output（MIMO） combined with the emerging use of millimeter wavelengths in small heterogeneous...The fifth generation mobile communication（5G） systems can provide Gbit/s data rates from massive multiple-input multiple-output（MIMO） combined with the emerging use of millimeter wavelengths in small heterogeneous cells. This paper develops an energy-efficiency based multi-user hybrid beamforming for downlink millimeter wave（mm Wave） massive MIMO systems. To make better use of directivity gains of the analog beamforming and flexible baseband processing of the digital beamforming, this paper proposes the analog beamforming to select the optimal beam which can maximize the power of the objective user and minimize the interference to all other users. In addition, the digital beamforming maximizes the energy efficiency of the objective user with zero-gradient-based approach. Simulation results show the proposed algorithm provide better bit error rate（BER） performance compared with the traditional hybrid beamforming and obviously improved the sum rate with the increase in the number of users. It is proved that multi-user MIMO（MU-MIMO） can be a perfect candidate for mm Wave massive MIMO communication system. Furthermore, the analog beamforming can mitigate the inter-user interference more effectively with the selection of the optimal beam and the digital beamforming can greatly improve the system performance through flexible baseband processing.展开更多
文摘VCSEL Injection locking is demonstrated to increase laser bandwidth and reduce non-linearity and chirp. All these properties enhance analog and digital modulation performance.
基金co-supported by the Foundation for Innovative Research Groups of the National Natural Science Foundation of China (No. 51121004)the Fundamental Research Funds for the Central Universities of China (No. HIT.BRETIV.201315)
文摘Actively cooled thermal protection system has great influence on the engine of a hypersonic vehicle, and it is significant to obtain the thermal and stress distribution in the system. So an analytic estimation and numerical modeling are performed in this paper to investigate the behavior of an actively cooled thermal protection system. The analytic estimation is based on the electric analogy method and finite element analysis（FEA） is applied to the numerical simulation. Temperature and stress distributions are obtained for the actively cooled channel walls with three kinds of nickel alloys with or with no thermal barrier coating（TBC）. The temperature of the channel wall with coating has no obvious difference from the one with no coating, but the stress with coating on the channel wall is much smaller than that with no coating. Inconel X-750 has the best characteristics among the three Ni-based materials due to its higher thermal conductivity, lower elasticity module and greater allowable stress. Analytic estimation and numerical modeling results are compared with each other and a reasonable agreement is obtained.
基金supported by the Hi-Tech Research and Development Program of China(2014AA01A705)
文摘The fifth generation mobile communication（5G） systems can provide Gbit/s data rates from massive multiple-input multiple-output（MIMO） combined with the emerging use of millimeter wavelengths in small heterogeneous cells. This paper develops an energy-efficiency based multi-user hybrid beamforming for downlink millimeter wave（mm Wave） massive MIMO systems. To make better use of directivity gains of the analog beamforming and flexible baseband processing of the digital beamforming, this paper proposes the analog beamforming to select the optimal beam which can maximize the power of the objective user and minimize the interference to all other users. In addition, the digital beamforming maximizes the energy efficiency of the objective user with zero-gradient-based approach. Simulation results show the proposed algorithm provide better bit error rate（BER） performance compared with the traditional hybrid beamforming and obviously improved the sum rate with the increase in the number of users. It is proved that multi-user MIMO（MU-MIMO） can be a perfect candidate for mm Wave massive MIMO communication system. Furthermore, the analog beamforming can mitigate the inter-user interference more effectively with the selection of the optimal beam and the digital beamforming can greatly improve the system performance through flexible baseband processing.
