Application of Hazard Vulnerability Analysis Based on Kaiser Model in Neonatal Breast Milk Management

Objective:To analyze the existing risks in breast milk management at the neonatal department and provide corresponding countermeasures.Methods:22 risk events were identified in 7 risk links in the process of bottle-feeding of breast milk.Hazard Vulnerability Analysis based on the Kaiser model was applied to investigate and evaluate the risk events.Results:High-risk events include breast milk quality inspection,hand hygiene during collection,disinfection of collectors,cold chain management,hand hygiene during the reception,breast milk closed-loop management,and post-collection disposal.Root cause analysis of high-risk events was conducted and breast milk management strategies outside the hospital and within the neonatal department were proposed.Conclusion:Hazard Vulnerability Analysis based on the Kaiser model can identify and assess neonatal breast milk management risks effectively,which helps improve the management of neonatal breast milk.It is conducive to the safe development and promotion of bottle feeding of breast milk for neonates,ensuring the quality of medical services and the safety of children.

Analysis and Pollution Assessment on the Dissolved Organic Matter in the Sediment of Hydro-fluctuation Belt(Yunyang Part)

By using the ultraviolet absorption spectrum,the fluorescence spectrum and three dimensional fluorescence spectra,the composition of dissolved organic matter(DOM) and the humification degree,etc.in the sediment of hydro-fluctuation belt(Yunyang part) were analyzed.The relationship between the test parameters and the pollution degree in the region was discussed.The research results of UV spectrum data E3/E4 showed that in 4 sampling sites which included Huangshi Town,Gaoyang Town,Shuangjiang Town and Quma Town,the humification degree in the sediment of hydro-fluctuation belt in Shuangjiang Town sampling site was lower,and the aromaticity was smaller.Moreover,the effect of human factor was comparatively smaller.The fluorescence index value which represented the source of humus in DOM was 1.62-1.88.It showed that the biological and terrestrial source both existed.Three dimensional spectra results showed that the pollution degrees in 4 sampling sites were all smaller,and some prevention measures should be taken early.

The Pollution Character Analysis and Risk Assessment for Metals in Dust and PM_(10) around Road from China

INTRODUCTION In recent years, with the gradual improvement of road construction, the rapid increase of the number of motor vehicles, vehicle emissions and the current poor vehicle performance, poor vehicle maintenance, higher emission factor and so on, air pollution caused by the traffic issues becomes the focus of people attention. The harmful substances are gradually accumulated to atmosphere particles surrounding roads due to dust particles （soil dusts, road dusts, construction dusts）, coal emissions, industrial emissions, vehicle emissions, biomass burning, secondary particles, which has a certain harmful influence to the atmosphere, soil and plants surrounding roads.

The Analysis and Assessment of the Creation Investment Risk in the High and New Technology, Enterprise

The creation risk investmentof the high and new technology enterprise isthe way to finance：and invest for the business period. After we putting the capital into the high and new. technology project.that is in the devetopment stage, the enterprise can, acquire high, increase, by the. support and assistance ＇of, the. capital and management. After the enterprise grew up, it can achieve high benefits by selling stock, attorning the enterprise, and dealing property rights, etc. Finally it secedes form the enterprise invested. The purpose of total analysis in the respective stage for the business investment cause including cause prosperities, object, risk, is to comprehensively understand the effect on the anticipation ratio of the benefit, investment distribution, the stock property proportion which is offered by the activity content, and the emphasis of the assessment in the respective stages of the creation risk investment cause.

Environment Quality Assessment of Marine Fishery in Zhujiajian Sea Area in Zhoushan

Based on the monitoring data on Zhujiajian sea area in Zhoushan in De- cember 2015, the assessment and analysis of seawater quality of this sea area were carried out according to relevant environmental quality standards. The contents of heavy metals and inorganic nitrogen were lower than the water quality standards, and the main pollutant was phosphate （PO4-P）.

Fracture Assessment for Electron Beam Welded Damage Tolerant Ti-6Al-4V Alloy by the FITNET Procedure

Fracture assessment of the cracked structures is essential to avoiding fracture failure.A number of fracture assessment procedures have been proposed for various steel structures.However,the studies about the application of available procedures for titanium alloy structures are scarcely reported.Fracture assessment for the electron beam(EB) welded thick-walled damage tolerant Ti-6Al-4V(TC4-DT) alloy is performed by the fitness-for-service(FFS) FITNET procedure.Uniaxial tensile tests and fracture assessment tests of the base metal and weld metal are carried out to obtain the input information of assessment.The standard options and advanced options of FITNET FFS procedure are used to the fracture assessment of the present material.Moreover,the predicted maximum loads of compact tensile specimen using FITNET FFS procedure are verified with the experimental data of fracture assessment tests.As a result,it is shown that the mechanical properties of weld metal are inhomogeneous along the weld depth.The mismatch ratio M is less than 10% at the weld top and middle,whereas more than 10% at the weld bottom.Failure assessment lines of standard options are close to that of advanced option,which means that the standard options are suitable for fracture assessment of the present welds.The accurate estimation of the maximum loads has been obtained by fracture assessment of standard options with error less than 6%.Furthermore,there are no potential advantages of applying higher options or mismatch options.Thus,the present welded joints can be treated as homogeneous material during the fracture assessment,and standard option 1 can be used to achieve accurate enough results.This research provides the engineering treatment methods for the fracture assessment of titanium alloy and its EB welds.

Assessment of C-band compact polarimetry SAR for sea ice classification

The C-band synthetic aperture radar（SAR） data from the Bohai Sea of China, the Labrador Sea in the Arctic and the Weddell Sea in the Antarctic are used to analyze and discuss the sea ice full polarimetric information reconstruction ability under compact polarimetric modes. The type of compact polarimetric mode which has the highest reconstructed accuracy is analyzed, along with the performance impact of the reconstructed pseudo quad-pol SAR data on the sea ice detection and sea ice classification. According to the assessment and analysis, it is recommended to adopt the CTLR mode for reconstructing the polarimetric parameters σ_（HH）~0,σ_（VV）~0, H and α,while for reconstructing the polarimetric parameters σ_（HV）~0, ρ_（H-V）, λ_1 and λ_2, it is recommended to use the π/4 mode.Moreover, it is recommended to use the π/4 mode in studying the action effects between the electromagnetic waves and sea ice, but it is recommended to use the CTLR mode for studying the sea ice classification.

Analysis and Evaluation of Bioavailable Heavy Metals in Surface Soil of the Abandoned Lead-zinc Mine in Changhua,Hainan Province

[Objectives] The research was conducted to study characteristics of bioavailable levels pollution of heavy metals in the surface soil of the lead-zinc mine in Changhua.[Methods] A total of 56 surface samples were collected from the 3 study zones （peripheral zone, reclamation zone and tailing zone） located at the lead-zine mine in Changhua. Based on total and bioavailable heavy metals （Pb, Zn, Cu and Cd） in soils, the correlation of total content with bioavailable content was analyzed, and their pollution characteristics were assessed by methods of single factor pollution index, Nemerow pollution index, geological accumulation index and potential ecological risk index.[Results] （i） The surface soils were polluted by Pb, Zn, Cu, Cd in different degrees, and the overall trend of the contents of the 4 heavy metals was in order of Cd 〉 Pb 〉 Zn 〉 Cu. The average excess multiple of heavy metals of total and bioavailable content in soils were in the order of peripheral zone 〉 tailing zone 〉 reclaimed zone, and their pollution degrees were tailing zone 〉 peripheral zone 〉 reclaimed zone. （ii） In general, the total and bioavailable contents of Pb, Zn, Cu, Cd showed a significant correlation, but were not correlated in each study zone. （iii） Pollution degrees of the study zones were in the order of tailing zone 〉 peripheral zone 〉 reclamation zone. The pollutions of heavy metals Pb and Cd were more serious, especially Cd reached high levels of pollution degree, and the pollution degrees of Zn, Cu were lighter. Contributors of ecological risk were mainly Cd, Pb and Cu, and the contribution of Cd achieved more than 90 %, making it the main source of pollution.[Conclusions] The results not only revealed the pollution status of heavy metals in the surface soil of the abandoned coal mine, but also could provide scientific guidance for reasonable utilization and ecological recovery of the land.

Assessment of structural damage using natural frequency changes

The present paper develops a new method for damage localization and severity estimation based on the employment of modal strain energy. This method is able to determine the damage locations and estimate their severities, requiring only the information about the changes of a few lower natural frequencies. First, a damage quantification method is formulated and iterative approach is adopted for determining the damage extent. Then a damage localization algorithm is proposed, in which a damage indicator is formulated where unity value corresponds to the true damage scenario. Finally, numerical studies and model tests are conducted to demonstrate the effectiveness of the developed algorithm.

Safety assessment of waste rock dump built on existing tailings ponds

The construction of waste rock dumps on existing tailing ponds has been put into practice in China to save precious land resources. This work focuses on the safety assessment of the Daheishan molybdenum mine waste rock dump under construction on two adjoining tailings ponds. The consolidation of the tailings foundation and the filling quality of the waste rock are investigated by the transient electromagnetic method through detecting water-rich areas and loose packing areas, from which, the depth of phreatic line is also estimated. With such information and the material parameters, the numerical method based on shear strength reduction is applied to analyzing the overall stability of the waste rock dump and the tailings ponds over a number of typical cross sections under both current and designed conditions, where the complex geological profiles exposed by site investigation are considered. Through numerical experiments, the influence of soft lenses in the tailings and possible loose packing areas in the waste rock is examined. Although large displacements may develop due to the soft tailings foundation, the results show that the waste rock dump satisfies the safety requirements under both present and designed conditions.

Landslide susceptibility modeling based on ANFIS with teaching-learning-based optimization and Satin bowerbird optimizer

As threats of landslide hazards have become gradually more severe in recent decades,studies on landslide prevention and mitigation have attracted widespread attention in relevant domains.A hot research topic has been the ability to predict landslide susceptibility,which can be used to design schemes of land exploitation and urban development in mountainous areas.In this study,the teaching-learning-based optimization(TLBO)and satin bowerbird optimizer(SBO)algorithms were applied to optimize the adaptive neuro-fuzzy inference system(ANFIS)model for landslide susceptibility mapping.In the study area,152 landslides were identified and randomly divided into two groups as training(70%)and validation(30%)dataset.Additionally,a total of fifteen landslide influencing factors were selected.The relative importance and weights of various influencing factors were determined using the step-wise weight assessment ratio analysis(SWARA)method.Finally,the comprehensive performance of the two models was validated and compared using various indexes,such as the root mean square error(RMSE),processing time,convergence,and area under receiver operating characteristic curves(AUROC).The results demonstrated that the AUROC values of the ANFIS,ANFIS-TLBO and ANFIS-SBO models with the training data were 0.808,0.785 and 0.755,respectively.In terms of the validation dataset,the ANFISSBO model exhibited a higher AUROC value of 0.781,while the AUROC value of the ANFIS-TLBO and ANFIS models were 0.749 and 0.681,respectively.Moreover,the ANFIS-SBO model showed lower RMSE values for the validation dataset,indicating that the SBO algorithm had a better optimization capability.Meanwhile,the processing time and convergence of the ANFIS-SBO model were far superior to those of the ANFIS-TLBO model.Therefore,both the ensemble models proposed in this paper can generate adequate results,and the ANFIS-SBO model is recommended as the more suitable model for landslide susceptibility assessment in the study area considered due to its excellent accuracy and efficiency.

An Evaluation Approach for Operational Effectiveness of Anti-radiation Weapon

With the development of anti-radiation weapons,the effectiveness evaluation of anti-radiation weapons has been turned from the simple accuracy index to the integrated countermeasure capability.The research priority is how to access the combat effectiveness of anti-radiation weapons in a complex countermeasure environment.For the present situation of range test of anti-radiation weapons,a combat effectiveness assessment model based on non-linear index aggregation is proposed for anti-radiation weapons.And the corresponding index system model,index aggregation methods,index marking method and index weight determination are given.Finally,the simulation results verify the efficiency and feasibility of the proposed method.

Research on Coordinated Antisumarine Attack Effeciency of Two Helicopters Under Countermeasures

The organization of coordinated attack and the selection of aiming point which affect hit probability were analyzed for the countermeasures taken by the hostile submarines at two helicopters' coordinated attack.A computational model of coordinated attack parameters,a model of submarine maneuver,and a model of noise jammer were established.Compared to single helicopter' torpedo attack,the coordinated attack of two helicopters can effectively increase the hit probability of torpedo and achieve the higher target detecting probability under counterwork condition.

Debris flow and landslide hazard mapping and risk analysis in China

This paper assesses the hazardousness, vulnerability and risk of debris flow and landslide in China and compiles maps with a scale of 1：6000000, based on Geographical Information System （GIS） technology, hazard regionalization map, socioeconomic data from 2000. Integrated hazardousness of debris flow and landslide is equivalent to the sum of debris flow hazardousness and landslide hazardousness. Vulnerability is assessed by employing a simplified assessment model. Risk is calculated by the following formula： Risk = Hazardousness × Vulnerability. The analysis results of assessment of hazardousness, vulnerability and risk show that there are extremely high risk regions of 104 km2, high risk regions of 283008 km2, moderate risk regions of 3161815 km2, low risk regions of 3299604km2, and extremely low risk regions of 2681709 km2. Exploitation activities should be prohibited in extremely high risk and high risk regions and restricted in moderate risk regions. The present study on risk analysis of debris flow and landslide not only sheds new light on the future work in this direction but also provides a scientific basis for disaster prevention and mitigation policy making.

Spatial distribution and pollution assessment of mercury in sediments of Lake Taihu,China

Spatial distribution patterns of total mercury （THg） in 36 surficial sediment samples representing five regions of Lake Taihu were assessed using the ArcGis geostatistical analyst module. The pollution levels of THg were also evaluated from the same five lake regions. Concentrations of THg were in a ranged of 23-168 ng/g （mean 55 ng/g） in surfical sediments, which was significantly higher than those established baseline levels of the lake. Results of THg indicated that the northern region exhibited notably higher values, the bay regions showed elevated values relative to open areas, and the lakeside regions were higher than those observed in the central area. Lake Taihu suffered moderate to high Hg pollution, and expressed clear Hg enrichment status according to monomial pollution index I geo and human activity factors. The concentrations of THg in the surficial sediments of Lake Taihu showed moderate-strong variation （coefficient of variation 52%）. Geostatistical analysis indicated a weak spatial self-correlation, suggesting the contamination of Hg in Lake Taihu is primarily the result of anthropogenic activities.

Safety Analysis of Flow Parameters in a Rotor-stator Cavity

In order to ensure the safety of engine life limited parts （ELLP） according to airworthiness regulations, a numerical approach integrating one-way fluid structure interaction （FSI） and probabilistic risk assessment （PRA） is developed, by which the variation of flow parameters in a rotor-stator cavity on the safety of gas turbine disks is investigated. The results indicate that the flow parameters affect the probability of fracture of a gas turbine disk since they can change the distribution of stress and temperature of the disk. The failure probability of the disk rises with increasing rotation Reynolds number and Chebyshev number, but descends with increasing inlet Reynolds number. In addition, a sampling based sensitivity analysis with finite difference method is conducted to determine the sensitivities of the safety with respect to the flow parameters. The sensitivity estimates show that the rotation Reynolds number is the dominant variable in safety analysis of a rotor-stator cavity among the flow parameters.

Implementation of a drainage information, analysis and management system

An integrated drainage information, analysis and management system （DIAMS） was developed and implemented for the New Jersey Department of Transportation （N/DOT）. The purpose of the DIAMS is to provide a useful tool for managers to evaluate drainage infrastructure, to facilitate the determination of the present costs of preserving those in- frastructures, and to make decisions regarding the optimal use of their infrastructure budgets. The impetus for DIAMS is the culvert information management system （CIMS）, which is developed to manage the data for culvert pipes. DIAMS maintains and summa- rizes accumulated inspection data for all types of drainage infrastructure assets, including pipes, inlet/outlet structures, outfalls and manufactured treatment devices. DIAMS capa- bilities include identifying drainage infrastructure, maintaining inspection history, map- ping locations, predicting service life based on the current condition states, and assessing present asset value. It also includes unit cost values of 72 standard items to estimate the current cost for new assets with the ability to adjust for future inflation. In addition, DIAMS contains several different repair, rehabilitation and replacement options to remedy the drainage infrastructure. DIAMS can analyze asset information and determine decisions to inspect, rehabilitate, replace or do nothing at the project and network levels by comparing costs with risks and failures. Costs may be optimized to meet annual maintenance budget allocations by pfioritizing drainage infrastructure needing inspection, cleaning and repair. DIAMS functional modules include vendor data uploading, asset identification, system administration and financial analysis. Among the significant performance feature of DIAMS is its proactive nature, which affords decision makers the means of conducting a comprehensive financial analysis to determine the optimal proactive schedule for the proper maintenance actions and to prioritize them accordingly. Benefits of DIAMS include long-term savings that accrue by adopting optimized preventive maintenance strategies and facilitating compliance with Governmental Accounting Standards Board （GASB） and federal storm water regulations.

Impact of environmental factors on water quality at multiple spatial scales and its spatial variation in Huai River Basin, China

Quantitative assessment of water quality and its spatial variation identification, as well as the discernment of primary factors affecting water quality are in its urgent in water environment management. In this study, four key water quality indicators,namely, ammonia nitrogen(NH_4^+-N), permanganate index(COD_(Mn)), total phosphorus(TP) and total nitrogen(TN) at 71 sampling sites were selected to evaluate water quality and its spatial variation identification. More concerns were emphasized on the anthropogenic factors(land use pattern) and natural factors(river density, elevation and precipitation) to quantify the overall water quality variations at different spatial scales. Results showed that the Yi-Shu-Si River sub-basin had a better water quality status than the Huai River sub-basin. The moderate polluted area nearly distributed in the upper and middle reaches of the Shaying River and Guo River. The high cluster centers which were surrounded with COD_(Mn), NH_4^+-N, TN and TP mainly also distributed in the upper and middle reaches of the Shaying River and Guo River. Redundancy analysis showed that the 200 m buffer area acted as the most sensitive area, which was easily subjected to pollution. The precipitation was identified as the most important variables among all the studied hydrological units, followed by farmland, urban land or elevation. The point source pollution was still existed although the non-point source pollution was also identified. The urban surface runoff pollution was severer than farmland fertilizer loss at the sub-basin scale in flood season, while the farmland showed "small-scale" effects for explaining overall water quality variations. This research is helpful for identifying the overall water quality variations from the scale-process interactions and providing a scientific basis for pollution control and decision making for the Huai River Basin.