Numerical Analysis of Explosion Characteristics of Vent Gas From 18650 LiFePO_(4) Batteries With Different States of Charge

The combustion and explosion characteristics of lithium-ion battery vent gas is a key factor in determining the fire hazard of lithium-ion batteries.Investigating the combustion and explosion hazards of lithium-ion batteries vent gas can provide guidance for rescue and protection in explosion accidents in energy storage stations and new energy vehicles,thereby promoting the application and development of lithium-ion batteries.Based on this understanding and combined with previous research on gas production from lithium-ion batteries,this article conducted a study on the combustion and explosion risks of vent gas from thermal runaway of 18650 LFP batteries with different states of charge(SOCs).The explosion limit of mixed gases affected by carbon dioxide inert gas is calculated through the“elimination”method,and the Chemkin-Pro software is used to numerically simulate the laminar flame speed and adiabatic flame temperature of the battery vent gas.And the concentration of free radicals and sensitivity coefficients of major elementary reactions in the system are analyzed to comprehensively evaluate the combustion explosion hazard of battery vent gas.The study found that the 100%SOC battery has the lowest explosion limit of the vent gas.The inhibitory elementary reaction sensitivity coefficient in the reaction system is lower and the concentration of free radicals is higher.Therefore,it has the maximum laminar flame speed and adiabatic flame temperature.The combustion and explosion hazard of battery vent gas increases with the increase of SOC,and the risk of explosion is the greatest and most harmful when SOC reaches 100%.However,the related hazards decrease to varying degrees with overcharging of the battery.This article provides a feasible method for analyzing the combustion mechanism of vent gas from lithium-ion batteries,revealing the impact of SOC on the hazardousness of battery vent gas.It provides references for the safety of storage and transportation of lithium-ion batteries,safety protection of energy storage stations,and the selection of related fire extinguishing agents.

Analysis and Research on Aerodynamic Characteristics of Quad Tilt Rotor Aircraft

For the quad tilt rotor aircraft, a computational fluid dynamics method based on multiple reference frames (MRF) was used to analyze the influence of aerodynamic layout parameters on the aerodynamic characteristics of the quad tilt rotor aircraft. Firstly, a numerical simulation method for the interference flow field of the quad tilt rotor aircraft is established. Based on this method, the aerodynamic characteristics of isolated rotors, rotor combinations at different lateral positions on the wing, and rotor rotation directions under different inflow velocities were calculated and analyzed, in order to grasp their aerodynamic interference laws and provide reference for the design and control theory research of such aircraft.

Dynamical Modeling and Dynamic Characteristics Analysisof a Coaxial Dual-Rotor System

The dual-rotor structure serves as the primary source of vibration in aero-engines. Understanding itsdynamical model and analyzing dynamic characteristics, such as critical speed and unbalanced response, arecrucial for rotor system dynamics. Previous work introduced a coaxial dual-rotor-support scheme for aeroengines,and a physical model featuring a high-speed flexible inner rotor with a substantial length-to-diameter ratiowas designed. Then a finite element (FE) dynamic model based on the Timoshenko beam elements and rigid bodykinematics of the dual-rotor system is modeled, with the Newmark method and Newton–Raphson method used forthe numerical calculation to study the dynamic characteristics of the system. Three different simulation models,including beam-based FE (1D) model, solid-based FE (3D) model, and transfer matrix model, were designed tostudy the characteristics of mode and the critical speed characteristic of the dual-rotor system. The unbalancedresponse of the dual-rotor system was analyzed to study the influence of mass unbalance on the rotor system. Theeffect of different disk unbalance phases and different speed ratios on the dynamic characteristics of the dual-rotorsystem was investigated in detail. The experimental result shows that the beam-based FE model is effective andsuitable for studying the dual-rotor system.

Effect of FeSi additive in dual-chamber sample cup on thermal analysis characteristic values and vermiculating rate of compacted graphite iron

Thermal analysis plays a key role in the online inspection of molten iron quality.Different solidification process of molten iron can be reflected by thermal analysis curves,and silicon is one of important elements affecting the solidification of molten iron.In this study,FeSi75 was added in one chamber of the dual-chamber sample cup,and the influences of FeSi75 additive on the characteristic values of thermal analysis curves and vermiculating rate were investigated.The results show that with the increase of FeSi75,the start temperature of austenite formation TALfirstly decreases and then increases,but the start temperature of eutectic growth TSEF,the lowest eutectic temperature TEU,temperature at maximum eutectic reaction rate TEM,and highest eutectic temperature TERkeep always an increase.The temperature at final solidification point TEShas little change.The FeSi75 additive has different influences on the vermiculating rate of molten iron with different vermiculation,and the vermiculating rate increases for lower vermiculation molten iron while decreases for higher one.According to the thermal analysis curves obtained by a dual-chamber sample cup with 0.30wt.%FeSi75 additive in one chamber,the vermiculating rate of molten iron can be evaluated by comparing the characteristic values of these curves.The time differenceΔtERcorresponding to the highest eutectic temperature TERhas a closer relationship with the vermiculating rate,and a parabolic regression curve between the time differenceΔtERand vermiculating rateηhas been obtained within the range of 65%to 95%,which is suitable for the qualified melt.

A Study of the English Translation of Characteristic Cuisines of the Hexi Corridor from the Perspective of Multimodal Discourse Analysis

Given the diversity of geographical and cultural backgrounds,it is difficult to find precise counterparts of many food-related vocabularies in the unique dietary culture of the Hexi Corridor in the target language,making it challenging to fully convey the essence of its local dietary culture in translation.To achieve the purpose of translation,the theory of multimodal discourse analysis provides an ideal translation approach through the language mode,image mode,sound mode,and the synergistic effect of multimodalities,which can accurately address the deficiencies in the translation of dietary culture.Through this research,it is not only possible to highlight the unique charm of the dietary culture of the Hexi Corridor but also to build a bridge for its international dissemination,promoting cross-border cultural exchanges and mutual understanding.

Blast wave characteristics of multi-layer composite charge:Theoretical analysis,numerical simulation,and experimental validation

This article investigates the characteristics of shock wave overpressure generated by multi-layer composite charge under different detonation modes.Combining dimensional analysis and the explosion mechanism of the charge,a peak overpressure prediction model for the composite charge under singlepoint detonation and simultaneous detonation was established.The effects of the charge structure and initiation method on the overpressure field characteristics were investigated in AUTODYN simulation.The accuracy of the prediction model and the reliability of the numerical simulation method were subsequently verified in a series of static explosion experiments.The results reveal that the mass of the inner charge was the key factor determining the peak overpressure of the composite charge under single-point detonation.The peak overpressure in the radial direction improved apparently with an increase in the aspect ratio of the charge.The overpressure curves in the axial direction exhibited a multi-peak phenomenon,and the secondary peak overpressure even exceeded the primary peak at distances of 30D and 40D(where D is the charge diameter).The difference in peak overpressure among azimuth angles of 0-90°gradually decreased with an increase in the propagation distance of the shock wave.The coupled effect of the detonation energy of the inner and outer charge under simultaneous detonation improved the overpressure in both radial and axial directions.The difference in peak overpressure obtained from model prediction and experimental measurements was less than 16.4%.

Detection and characteristics analysis of the western subarctic front using the high-resolution SST product

Oceanic front plays a significant role in the ocean vertical mixing and the regulation of air-sea interaction,among others.The western branch of the subarctic front(WSAF)located in the Northwest Pacific has attained lots of attention given its strong intensity and widespread influence on this region.In this study,we take advantage of the merged sea surface temperature(SST)at a high spatial resolution of 0.05°to investigate the characteristics of WSAF.The front detection algorithm that combines the Sobel operator and histogram analysis is adopted.It is advantageous in both preserving the front intensity represented by the SST gradient as well as reducing the detection noise level.We systematically applied this algorithm to the daily SST products for front detection,based on which the WSAF characteristics including its intensity,occurrence of frequency,latitudinal position and coverage area are then extracted.WSAF is mostly located within a small latitude range between 40°N and 41°N with a clear seasonal trend in its intensity that peaks in the winter and troughs in the summer.The seasonal variation of WSAF intensity is almost consistent throughout the temporal period of interest from 2010 to 2018.Similar seasonality is observed for its occurrence of frequency with the winter-summer contrast reaching up to5%.The findings presented here shall help better interpret the WSAF characteristics in the long-term run as well as their impact on the regional weather and climate patterns at high spatial resolution.

Analysis of Morphometric Parameters and Radioactive Characteristics Using Remote Sensing Data and GIS Techniques in the Wadi Wizr Basin Area, Central Eastern Desert, Egypt

The purpose of this study is to demonstrate how modern technologies such as geographic information systems (GIS) and digital elevation models can help in the creation of a geographic database for the Wadi Wizr basin in Egypt’s Central Eastern Desert, in addition to examining and analysing the radioactive properties of various rocks. This was accomplished with the help of a digital elevation model (DEM) with a 30 metre accuracy and GIS software in 10.8 Arc Map. The RS-230 was also used to measure uranium and thorium concentrations. GIS softwares and digital elevation models have been shown to be more effective than the traditional method. This was demonstrated by the flexible and quick working method, the accuracy of the parameters used, and the results of the morphometric analysis of the basin river network. In addition to, the main drainage pattern from subtype to tree type, where the branching ratio was (1.59). This basin could also cause flooding. Similar studies, according to the results of this study, should make greater use of geographic information system technology and modern data sources. Wadi Wizr also has a radioactive anomaly, with uranium equivalent concentrations reaching 70 ppm in some fault parts.

Analysis on Climatic Characteristics of High Temperature Weather in Longdong Region

Using meteorological data from 8 national basic meteorological observation stations in Qingyang City of Longdong region from 1972 to 2021,the causes and change characteristics of high-temperature weather were analyzed,and targeted countermeasures and suggestions were proposed for residents' production,life,and energy security supply affected by high-temperature weather.The results showed that①affected by global warming,the annual average temperature,annual average maximum temperature,annual extreme maximum temperature,days of daily maximum temperature≥30℃,and days of daily maximum temperature≥35℃in Longdong region were all showing an upward trend;②due to the different terrain and soil properties of the underlying surface,the increase in high temperature weather varied in different regions.Due to the influence of desert and hilly terrain,the frequency and days of high temperature occurrence were relatively high in the central and northern parts of Qingyang City.Due to the climate regulation of the Ziwuling Mountains,the days of high temperature in the central and southern parts was significantly less than that in the central and northern parts;③if the warm high pressure ridge on the Qinghai-Tibet Plateau developed strongly in summer,the temperature of the closed warm center reached 0-4℃on the 500 hPa of high-altitude weather map.If the warm air mass developed eastward,it often led to sustained high temperature weather in Longdong region;④when the El Nino phenomenon occurred,the subtropical high in the western Pacific developed strongly in summer,with a center located northward,which was stable,with little movement.It was dry,sunny,hot,and rainless in Longdong region,and the high temperature weather was more significant than that in normal years.

Analysis on the Variation Characteristics of Precipitation in North China during Recent 30 Years

Based on the monthly precipitation data from 43 stations in North China from 1979 to 2008,the variation characteristics of precipitation in North China in recent 30 years were analyzed by means of empirical orthogonal function(EOF)decomposition,Morlet wavelet transform and Mann-Kendall test.The results showed that the spatial distribution of annual and seasonal precipitation was basically identical in North China,while the annual and summer precipitation from the middle of 1980s to the middle of 1990s were obviously more than these in other periods,and there was great annual variation in spring precipitation in 1990s,while autumn precipitation was higher from 1980s to 1990s and then went down after the beginning of 21st century,which was opposite to winter precipitation,namely there was more winter precipitation from 1980s to 1990s and fewer winter precipitation after the beginning of 21st century.In addition,the annual and summer precipitation changed abruptly in 1997,and there was no obvious change in spring precipitation and autumn precipitation,while winter precipitation had an abrupt change in 2000.Meanwhile,wavelet analysis revealed that the variation period of annual and seasonal precipitation was 3-4 years.

Analysis of the Characteristics of Typical Haze in Winter

Based on meteorology and environment monitoring data in January,2008 in Liaoning central region,a typical haze weather process was analyzed.The results showed that haze was formed due to the stable weather condition in the earth surface and upper air layer in Liaoning central region.Especially because that the weakening of atmospheric dispersion ability in the urban boundary layer that was 500 m under earth surface,caused the pollutant in the air can not disperse.Thus,it resulted in the deterioration of air quality,increase of concentration of particulate mass,and declination of visibility.And in the end,haze formed.

The analysis of frequency-dependent characteristics for fluid detection: a physical model experiment

According to the Chapman multi-scale rock physical model, the seismic response characteristics vary for different fluid-saturated reservoirs. For class I AVO reservoirs and gas-saturation, the seismic response is a high-frequency bright spot as the amplitude energy shifts. However, it is a low-frequency shadow for the Class III AVO reservoirs saturated with hydrocarbons. In this paper, we verified the high-frequency bright spot results of Chapman for the Class I AVO response using the frequency-dependent analysis of a physical model dataset. The physical model is designed as inter-bedded thin sand and shale based on real field geology parameters. We observed two datasets using fixed offset and 2D geometry with different fluid- saturated conditions. Spectral and time-frequency analyses methods are applied to the seismic datasets to describe the response characteristics for gas-, water-, and oil-saturation. The results of physical model dataset processing and analysis indicate that reflection wave tuning and fluid-related dispersion are the main seismic response characteristic mechanisms. Additionally, the gas saturation model can be distinguished from water and oil saturation for Class I AVO utilizing the frequency-dependent abnormal characteristic. The frequency-dependent characteristic analysis of the physical model dataset verified the different spectral response characteristics corresponding to the different fluid-saturated models. Therefore, by careful analysis of real field seismic data, we can obtain the abnormal spectral characteristics induced by the fluid variation and implement fluid detection using seismic data directly.

Morphological Characteristics Analysis of 11 Broom Sorghum Varieties

[Objective] To provide a theoretical basis for high-yield breeding of broom sorghum.[Method] Using 11 kinds of broom sorghum collected at home as research objects, the differences in morphological characteristics of broom sorghum were compared through the survey of some indicators, such as plant height, tillering, inflorescence, stem node, stem-leaf ratio, yield, and so on. [Result] The 11 kinds of broom sorghum were different in morphological characteristics with large amplitude of plant height; zygl-1, zygl-6, zygl-8 and zygl-9 were appropriate for fixed broom type; zygl-9 had the highest integrated production. [Condusion] The study laid the foundation for further exploring breeding, cultivation and promotion of broom sorghum.

Computer vision-aided DEM study on the compaction characteristics of graded subgrade filler considering realistic coarse particle shapes

The compaction quality of subgrade filler strongly affects subgrade settlement.The main objective of this research is to analyze the macro-and micro-mechanical compaction characteristics of subgrade filler based on the real shape of coarse particles.First,an improved Viola-Jones algorithm is employed to establish a digitalized 2D particle database for coarse particle shape evaluation and discrete modeling purposes of subgrade filler.Shape indexes of 2D subgrade filler are then computed and statistically analyzed.Finally,numerical simulations are performed to quantitatively investigate the effects of the aspect ratio(AR)and interparticle friction coefficient(μ)on the macro-and micro-mechanical compaction characteristics of subgrade filler based on the discrete element method(DEM).The results show that with the increasing AR,the coarse particles are narrower,leading to the increasing movement of fine particles during compaction,which indicates that it is difficult for slender coarse particles to inhibit the migration of fine particles.Moreover,the average displacement of particles is strongly influenced by the AR,indicating that their occlusion under power relies on particle shapes.The dis-placement and velocity of fine particles are much greater than those of the coarse particles,which shows that compaction is primarily a migration of fine particles.Under the cyclic load,the interparticle friction coefficientμhas little effect on the internal structure of the sample;under the quasi-static loads,however,the increase inμwill lead to a significant increase in the porosity of the sample.This study could not only provide a novel approach to investigate the compaction mechanism but also establish a new theoretical basis for the evaluation of intelligent subgrade compaction.

The runoff characteristics and harmonic analysis of the soil moisture dynamics in Robinia pseudoacacia stand

Robinia pseudoacacia stands act as a typical ecological protection forest in hilly semi-arid area of China. Two fields of surface runoff were separately set up in R. pseudoacacia stand and its clearcut area in the western Liaoning Province (1850-12225 E, 4024-4234 N) for measuring the characteristics of runoff and sediment as well as soil moisture dynamics. Contractive analysis of the two land types showed that there existed a significant difference in volumes of runoff and sediment between the sites of R. pseudoacacia stand and its clearcut area. The runoff volume and sediment volume in clearcut area were much bigger than those in R. pseudoacacia stand, with an increase amount of 40%-177% for runoff and 180%-400% for sediment. Hydrograph of surface runoff of typical rainfall showed that the peak value of runoff in R. pseudoacacia stand was decreased by 1.0-2.5?0-3m3s-1 compared with that in its clearcut area, and the occurring time of peak value of runoff in R. pseudoacacia stand was 10-20 min later than that in its clearcut area. Harmonic analysis of soil moisture dynamics indicated that the soil moisture in R. pseudoacacia stand was 2.3 % higher than that in clearcut area, and the soil moisture both in R. pseudoacacia stand and its clearcut area could be divided into dry season and humid season and varied periodically with annual rainfall precipitation. It was concluded that R. pseudoacacia stand plays a very important role in storing water, increasing soil moisture, and reducing surface runoff and soil erosion.

Circuit-Level Analysis on Opto-Electronic Characteristics of Ferroelectric Liquid Crystal

We propose an electronic model in Spice, instead of traditional mathematical analysis, for analyzing the performance of ferroelectric liquid crystal （FLC） under various working conditions. Using this equivalent circuit model,it is easy to simulate and analyze the behavior of an FLC layer in three different typical parameters,including temperature, input light wavelength, and the frequency of driving voltage. We conclude that the response velocity drops as the wavelength increases in the range of visible light, and for the parameter of temperature, the velocity reaches its lowest value when the temperature reaches a certain degree,meanwhile,the frequency of driving voltage exerts important effects on the response velocity only when the frequency is beyond a critical value. Excellent agreement is achieved between simulation and experimental results.

Analysis and verification of electrodynamic force,thermal stress and current sharing for CRAFT converter structure design

In the design realm of fusion power supplies,structural components play a pivotal role in ensuring the safety of fusion devices.To verify the reliability of the converter structure design at the Comprehensive Research Facility for Fusion Technology(CRAFT),meticulous analysis of the converter's dynamic impact is carefully performed based on the worst fault current(400k A),firstly.Subsequently,the thermal stress analysis based on the maximum allowable steadystate temperature is finished,and the equivalent thermal stress,thermal deformation,maximum shear stress of a single bridge arm and the whole converter are studied.Furthermore,a simple research method involving the current-sharing characteristics of a bridge arm with multithyristor parallel connection is proposed using a combination of Simplorer with Q3D in ANSYS.The results show that the current-sharing characteristics are excellent.Finally,the structural design has been meticulously tailored to meet the established requirements.

Short-time maritime target detection based on polarization scattering characteristics

In this paper,a detection method combining Cameron decomposition based on polarization scattering characteristics in sea clutter background is proposed.Firstly,the Cameron decomposition is exploited to fuse the radar echoes of full polarization channels at the data level.Due to the artificial material structure on the surface of the target,it can be shown that the non-reciprocity of the target cell is stronger than that of the clutter cell.Then,based on the analysis of the decomposition results,a new feature with scattering geometry characteristics in polarization domain,denoted as Cameron polarization decomposition scattering weight(CPD-SW),is extracted as the test statistic,which can achieve more detailed descriptions of the clutter scattering characteristics utilizing the difference between their scattering types.Finally,the superiority of the proposed CPD-SW detector over traditional detectors in improving detection performance is verified by the IPIX measured dataset,which has strong stability under short-time observation in threshold detection and can also improve the separability of feature space zin anomaly detection.

Application of modified discontinuous deformation analysis to dynamic modelling of the Baige landslide in the Jinsha River

Accurate dynamic modeling of landslides could help understand the movement mechanisms and guide disaster mitigation and prevention.Discontinuous deformation analysis(DDA)is an effective approach for investigating landslides.However,DDA fails to accurately capture the degradation in shear strength of rock joints commonly observed in high-speed landslides.In this study,DDA is modified by incorporating simplified joint shear strength degradation.Based on the modified DDA,the kinematics of the Baige landslide that occurred along the Jinsha River in China on 10 October 2018 are reproduced.The violent starting velocity of the landslide is considered explicitly.Three cases with different violent starting velocities are investigated to show their effect on the landslide movement process.Subsequently,the landslide movement process and the final accumulation characteristics are analyzed from multiple perspectives.The results show that the violent starting velocity affects the landslide motion characteristics,which is found to be about 4 m/s in the Baige landslide.The movement process of the Baige landslide involves four stages:initiation,high-speed sliding,impact-climbing,low-speed motion and accumulation.The accumulation states of sliding masses in different zones are different,which essentially corresponds to reality.The research results suggest that the modified DDA is applicable to similar high-level rock landslides.

Research on the Stability Analysis Method of DC Microgrid Based on Bifurcation and Strobe Theory

During the operation of a DC microgrid,the nonlinearity and low damping characteristics of the DC bus make it prone to oscillatory instability.In this paper,we first establish a discrete nonlinear system dynamic model of a DC microgrid,study the effects of the converter sag coefficient,input voltage,and load resistance on the microgrid stability,and reveal the oscillation mechanism of a DC microgrid caused by a single source.Then,a DC microgrid stability analysis method based on the combination of bifurcation and strobe is used to analyze how the aforementioned parameters influence the oscillation characteristics of the system.Finally,the stability region of the system is obtained by the Jacobi matrix eigenvalue method.Grid simulation verifies the feasibility and effectiveness of the proposed method.