Cookie Baking Process Optimization and Quality Analysis Based on Food 3D Printing

In order to obtain better quality cookies, food 3D printing technology was employed to prepare cookies. The texture, color, deformation, moisture content, and temperature of the cookie as evaluation indicators, the influences of baking process parameters, such as baking time, surface heating temperature and bottom heating temperature, on the quality of the cookie were studied to optimize the baking process parameters. The results showed that the baking process parameters had obvious effects on the texture, color, deformation, moisture content, and temperature of the cookie. All of the roasting surface heating temperature, bottom heating temperature and baking time had positive influences on the hardness, crunchiness, crispiness, and the total color difference(ΔE) of the cookie. When the heating temperatures of the surfac and bottom increased, the diameter and thickness deformation rate of the cookie increased. However,with the extension of baking time, the diameter and thickness deformation rate of the cookie first increased and then decreased. With the surface heating temperature of 180 ℃, the bottom heating temperature of 150 ℃, and baking time of 15 min, the cookie was crisp and moderate with moderate deformation and uniform color. There was no burnt phenomenon with the desired quality. Research results provided a theoretical basis for cookie manufactory based on food 3D printing technology.

Preliminary Study on Quality Analysis of Yao Medicine Pileostegia tomentella Hand.-Mazz.

[Objectives]To establish a method for quality analysis of Medicine Pileostegia tomentella Hand.-Mazz.[Methods]According to the testing method of Chinese Pharmacopoeia(2020 Edition),the water content,total ash and alcohol-soluble extract of P.tomentella Hand.-Mazz.were determined.[Results]10 batches of P.tomentella Hand.-Mazz.from different habitats and in different collection time in Guangxi all had the same plant morphology and medicinal properties.The experimental results showed that the water content was 7.92%-10.35%,the total ash content was 5.53%-6.62%,the acid-insoluble ash content was 0.59%-0.76%,and the extract content was 11.63%-16.12%.[Conclusions]The identification method in this study can be used for the quality analysis of P.tomentella Hand.-Mazz.,and the experimental results can provide a scientific basis for the development and utilization of P.tomentella Hand.-Mazz.and the establishment of its quality standard.

Effect of low-degree astigmatism on the objective visual quality

AIM:To evaluate the effect of low-degree astigmatism on objective visual quality through the Optical Quality Analysis System(OQAS).METHODS:This study enrolled 46 participants(aged 23 to 30y,90 eyes)with normal or corrected-to-normal vision.The cylindrical lenses(0,0.5,0.75,1.0,and 1.25 D)were placed at the axial direction(180°,45°,90°,and 135°)in front of the eyes with the best correction to form 16 types of regular low-degree astigmatism.OQAS was used to detect the objective visual quality,recorded as the objective scattering index(OSI),OQAS values at contrasts of 100%,20%,and 9%predictive visual acuity(OV100%,OV20%,and OV9%),modulation transfer function cut-off(MTFcut-off)and Strehl ratio(SR).The mixed effect linear model was used to compare objective visual quality differences between groups and examine associations between astigmatic magnitude and objective visual quality parameters.RESULTS:Apparent negative relationships between the magnitude of low astigmatism and objective visual quality were observed.The increase of OSI per degree of astigmatism at 180°,45°,90°,and 135°axis were 0.38(95%CI:0.35,0.42),0.50(95%CI:0.46,0.53),0.49(95%CI:0.45,0.54)and 0.37(95%CI:0.34,0.41),respectively.The decrease of MTFcut-off per degree of astigmatism at 180°,45°,90°,and 135°axis were-10.30(95%CI:-11.43,-9.16),-12.73(95%CI:-13.62,-11.86),-12.75(95%CI:-13.79,-11.70),and-9.97(95%CI:-10.92,-9.03),respectively.At the same astigmatism degree,OSI at 45°and 90°axis were higher than that at 0°and 135°axis,while MTFcut-off were lower.CONCLUSION:Low astigmatism of only 0.50 D can significantly reduce the objective visual quality.

QUALITY CONTROL OF SEMICONDUCTOR PACKAGING BASED ON PRINCIPAL COMPONENTS ANALYSIS

5 critical quality characteristics must be controlled in the surface mount and wire-bond process in semiconductor packaging. And these characteristics are correlated with each other. So the principal components analysis（PCA） is used in the analysis of the sample data firstly. And then the process is controlled with hotelling T^2 control chart for the first several principal components which contain sufficient information. Furthermore, a software tool is developed for this kind of problems. And with sample data from a surface mounting device（SMD） process, it is demonstrated that the T^2 control chart with PCA gets the same conclusion as without PCA, but the problem is transformed from high-dimensional one to a lower dimensional one, i.e., from 5 to 2 in this demonstration.

Evaluation of visual quality of spherical and aspherical intraocular lenses by Optical Quality Analysis System

AIM： To evaluate the impact of spherical and aspherical intraocular lenses on the postoperative visual quality of age-related cataract patients using Optical Quality Analysis System （OQAS）. METHODS： Seventy-four eyes with age-related cataracts were randomly divided into spherical and aspherical lens implantation groups. Best-corrected visual acuity （BCVA） was measured preoperatively, one day, one week, two weeks, one month and two months after surgery. A biometric systems analysis using the OQAS objective scattering index （OSI） was performed. RESULTS： There were no significant differences in visual acuity （P〉0.05） before and after spherical and aspheric lens implantation. There was a negative linear correction between the OSI value and BCVA （t-=-0.634, P=-0.000）, and positive corrections between the OSI value and the lens LOCUS III value of nucleus color （NC）, nucleus opacity （NO）, cortex （C） and posterior lens capsular （P） （r=0.704, P=0.000; r=0.514, P=0.000; r=0.276, P=0.020; r=0.417, P=-0.000, respectively）. OSI values of spherical vs aspherical lenses were 11.5±3.6 vs 11.8±3.4, 4.1±0.9 vs 3.3±0.8, 3.5±0.9 vs 2.7±0.7, 3.3±0.8 vs 2.6±0.7, 3.2±0.7 vs 2.5±0.8, and 3.2±0.8 vs 2.50.8 before and ld, 1, 2wk, 1 and 2mo after surgery, respectively. All time points varied significantly （P〈0.01） between the two groups. CONCLUSION： Aspherical IOLs does not significantly affect visual acuity compared with spherical IOLs. The OSI value, was significantly lower in the aspherical lens group compared with the spherical lens. This study shows that objective visual quality of aspheric IOLs is better than that of the spherical lens by means of OQAS biological measurement method.

Network Management of Food Additives Quality Analysis and Inspection

In this paper, on the basis of the implementation of the national chemical industry standard analytical test methods and analysis of test items, a food additive quality analysis and inspection of network management applications are developed using the development technology of Visual Basic language and computer system operating environment, to achieve a network management software for users on food additives of quality analytical testing. The software sets up an information sharing network platform for enterprise and quality management departments, which is a major innovation in the food additive quality analysis on test management methods and tools.

Intelligent Management Based on Chemical Reagent Quality Analysis

Access database technology and Visual Basic programming language are used to develop a set of chemical reagents quality analysis and inspection of intelligent management application software, and its stability was investigated. The results show that the sotfware is used to manage intelligently the quality analysis of chemical reagents test each linkage, to upload and save the analysis of test data and results in the network in time for users, to build a network of information sharing platform for enterprises and quality management departments, and its quality of chemical reagents test results is used to manage by the computer with practical application value. The software is simple, convenient, fast, friendly interface, stable operation, accurate and reliable results, with a high value to promote the application.

Signal quality analysis and quality check of BDS3 Precise Point Positioning in the Arctic Ocean

This study analyzes the signal quality and the accuracy of BeiDou 3 rd generation Satellite Navigation System(BDS3) Precise Point Positioning(PPP) in the Arctic Ocean. Assessment of signal quality of BDS3 includes signal to noise ratio(SNR), multipath(MP), dilution of precision(DOP), and code-minus-carrier combination(CC). The results show that, 5 to 13 satellites are visible at any time in the Arctic Ocean area as of September 2018, which are sufficient for positioning. In the mid-latitude oceanic region and in the Arctic Ocean, the SNR is 25–52 dB Hz and the MP ranges from-2 m to 2 m. As the latitude increases, the DOP values show large variation, which may be related to the distribution of BDS satellites. The CC values of signals B1 I and BIC range from-5 m to 5 m in the mid-latitude sea area and the Arctic Ocean, which means the effect of pseudorange noise is small. Moreover, as to obtain the external precise reference value for GNSS positioning in the Arctic Ocean region is difficult, it is hard to evaluate the accuracy of positioning results. An improved isotropy-based protection level method based on Receiver Autonomous Integrity Monitoring is proposed in the paper, which adopts median filter to smooth the gross errors to assess the precision and reliability of PPP in the Arctic Ocean. At first, the improved algorithm is verified with the data from the International GNSS Service Station Tixi. Then the accuracy of BDS3 PPP in the Arctic Ocean is calculated based on the improved algorithm. Which shows that the kinematic accuracy of PPP can reach the decimeter level in both the horizontal and vertical directions, and it meets the precision requirements of maritime navigation.

Analysis and Inverse Substructuring Computation on Dynamic Quality of Mechanical Assembly

Mechanical assembly has its own dynamic quality directly affecting the dynamic quality of whole product and should be considered in quality inspection and estimation of mechanical assembly. Based on functional relations between dynamic characteristics involved in mechanical assembly, the effects of assembling process on dynamic characteristics of substructural components of an assembly system are investigated by substructuring analysis. Assembly-coupling dynamic stiffness is clarified as the dominant factor of the effects and can be used as a quantitative measure of assembly dynamic quality. Two computational schemes using frequency response functions（FRFs） to determine the stiffness are provided and discussed by inverse substructuring analysis, including their applicable conditions and implementation procedure in application. Eigenvalue analysis on matrix-ratios of FRFs before and after assembling is employed and well validates the analytical outcomes and the schemes via both a lumped-parameter model and its analogic experimental counterpart. Applying the two schemes to inspect the dynamic quality provides the message of dynamic performance of the assembly system, and therefore improves conventional quality inspection and estimation of mechanical assembly in completeness.

Research of Water Quality Analysis,Treatment and Reuse Technology for Rainwater on the North University Campus

The pollution situation of different underlying surface and the change rule of each water quality index were researched,on the basis of rainwater quality monitoring by different approaches in a university campus. The results showed that due to some factors,such as the underlying surface material pollution,road materials,road surface pollution condition and surrounding atmospheric environment quality,the pollution of different underlying surface rainwater would be different. Main pollutants of rainwater runoff in the city campus area were such as COD,SS,NH;-N,TP,etc. Ultimately,along with the increase of accumulated rainfall,the pollutants tended to gradually decrease. The road rain pollution was more serious than roof runoff pollution and the early rain pollution was serious,but the late rain water quality was much better. According to the rainwater conditions,subsequent rainwater recycling technology and processing technology were determined as a way to alleviate the problem of water shortage and water pollution.

Quality Analysis of Herbal Medicine Products Prepared from Herba Sarcandrae by Capillary Electrophoresis with Electrochemical Detection

A capillary electrophoresis with electrochemical detection（CE-ED） method was developed for the quality analysis of herbal medicine products prepared from the same herb of Herba Sarcandrae： Fufang Caoshanhu tablets, Qingrexiaoyanning capsules, and Xuekang oral liquids. Under the optimal analysis conditions, the low detection limit[l.0×10^-7 mol/L（S/N=3）] and the wide linear range（1.0×10^-7-1.0×10^-4 mol/L） were obtained for quality standard compound of isofraxidin. The precisions of the peak current and the migration time（as RSDs） for the real sample analysis were 2.0%-2.6%, and 1.2%-1.8% for isofraxidin, respectively. The contents of isofraxidin detected were 15.77 μg/tablet, 0.48 mg/capsule, 1.2 mg/ampoule（Jiangxi）, and 0.44 mg/ampoule（Dalian） for Fufang Caoshanhu tablets, Qingrexiaoyanning capsules, and Xuekang oral liquids from different manufacturers, respectively. Quality estimate was conducted by comparing the contents of isofraxidin in the herbal medicine products with the demanded values of Chinese pharmacopeia. In addition, based on their own unique CE-ED profiles（namely, CE-ED electropherograms） the Xuekang oral liquids from the different manufacturers could be easily identified.

Analysis of Water and Soil Quality Characteristics in Turpan City

[ Objective] The study aimed to analyze water and soil quality characteristics in Turpan City. [ Method] According to Drinking Water Hy- gienic Standards （GB5749-2006） and Standards for Irrigation Water Quality （GB5084-2005）, five kinds of water samples collected from a karez, motor-pumped well, canal, village well and Aydingkol Lake in Turpan City as well as two types of soil samples irrigated by the karez and motor- pumped well water were analyzed in quality. [ Remit] Chloride and sulfate content in the village well and Aydingkol Lake water were higher than their limits in Dnnking Water Hygienic Standards, as well as sulfate content in the motor-pumped well and canal water. However, chloride and sul- fate content in the karez water did not exceed their limits. The soil irrigated by the karez water was salinized slightly, and organic matter content was higher; the soil irrigated by the motor-pumped well water was salinized seriously, and organic matter content was lower. [ Conclusion] The karez water is more applicable to farmland irrigation.

Groundwater Quality Analysis and Vulnerability Assessment in Longdong Area

Groundwater is important drinking water source in Longdong area. In recent years,as gradual expanding of industrial and agricultural production scales,seen from change trend of water quality,major impact factors of groundwater in the zone were ammonia nitrogen,COD,sulfate and total dissolved solid. By using specific thought of parameter system method,vulnerability assessment factor system of groundwater and meter point system calculation model in the zone were established. Via calculation and analysis,vulnerability distribution of groundwater in the zone was obtained. According to vulnerability index（ higher,moderate and lower）,zone dividing was conducted,and the areas were respectively 623. 25,4 005. 00 and 6 621. 75 km2,which respectively accounted for 5.54%,35. 60% and 58. 86%. The evaluation provided research basis for prevention,control and protection of groundwater environment in Longdong area.

Preliminary Study and Quality Analysis of Laggera alata

[Objectives]To establish a method for quality analysis of Laggera alata.[Methods]The water content,total ash and alcohol-soluble extract of Laggera alata were determined according to the method of 2015 edition of Chinese Pharmacopoeia.[Results]Ten batches of Laggera alata from different producing areas and different collection time in Guangxi had the same plant morphology and medicinal properties.The experimental results were as follows:the water content was 5.19%-10.86%;the total ash content was 5.91%-10.74%;the acid-insoluble ash content was 0.44%-0.92%;the extract content was 14.64%-19.95%.[Conclusions]The experimental results can provide scientific basis for the development and utilization of Laggera alata and the establishment of its quality standard.

Preliminary Study on Quality Analysis of Root of Griffith Streptocaulon

[Objectives]To make a preliminary study on quality analysis of Root of Griffith Streptocaulon.[Methods]The moisture,ash and extract of Root of Griffith Streptocaulon were tested in accordance with the requirements of 2015 Chinese Pharmacopoeia(Volume 4).[Results]The moisture content of Root of Griffith Streptocaulon was not higher than 12.74%,not lower than 6.26%,total ash content was not higher than 15.36%,not lower than 6.17%,acid-insoluble ash content was not higher than 0.55%,not lower than 0.17%,and extract was not higher than 11.83%,not lower than 5.23%.[Conclusions]This experiment made a preliminary study on the quality analysis of the Root of Griffith Streptocaulon,in the hope of providing a scientific basis for its quality control and formulation of the quality standard.

Preliminary Study on Quality Analysis of Guangxi Zhuang Medicine Lysimachia foenum-graecum Hance

[Objectives]To establish a quality analysis method for Guangxi Zhuang medicine Lysimachia foenum-graecum Hance.[Methods]The moisture,total ash and alcohol-soluble extracts of L.foenum-graecum medicinal materials were determined in accordance with the inspection method of the Chinese Pharmacopoeia(2015).[Results]The 10 batches of L.foenum-graecum medicinal materials from different origins and different collection times in Guangxi all had the same plant morphology and medicinal properties.The moisture content was 5.69%-10.51%,the total ash content was 5.50%-8.61%,the acid-insoluble ash content was 0.42%-0.78%,and the extract was 15.28%-20.75%.[Conclusions]This study is expected to provide a scientific basis for the development and utilization of L.foenum-graecum medicinal materials and the establishment of its quality standards.

Analysis of genetic effects and correlations for nutrient quality traits of indica rice in different environments

Understanding the variation for the expressionof genes in different environments is one of themajor goals in qualitative genetics. In this pa-per, the genetic models for quantitative traitsof endosperm in cereal crops were used to eval-uate the seed, cytoplasm and maternal geneticeffects as well as the genotype × environment(GE) interaction effects, and to predict thebreeding value of parents and genotypic corre-lation for nutrient quality traits of indica rice (Oryza sativa L.).

Analysis and Study on Quality Control of Yao Medicine Damnacanthus macrophyllus Based on Methods in Chinese Pharmacopoeia

[Objectives]To establish a quality analysis method for Yao medicine Damnacanthus macrophyllus Sieb.ex Miq.var.giganteus(Makino)Koidz..[D.indicus Gaertn.f.var.giganteus Makino].[Methods]The moisture,total ash and alcohol extracts of D.macrophyllus medicinal materials were determined according to the experimental methods in the Chinese Pharmacopoeia(2020).[Results]All the 10 batches of D.macrophyllus medicinal materials from different collection times and different regions in Guangxi had the same plant morphological characteristics.The experimental results indicate that the moisture was 9.81%-11.52%,the total ash content was 7.37%-9.53%,the acid-insoluble ash content was 1.10%-1.97%,and the extract was 8.25%-10.22%.[Conclusions]This study provides a scientific basis for establishing a quality standard for Yao medicine D.macrophyllus medicinal materials,and it is expected to better utilize and develop D.macrophyllus.

Analysis of the Fiber Quality of Upland Cotton in China from 2005 to 2007

Upper-half-mean length(Len),uniformity index(UI),breaking tenacity(Str),and micronaire value(Mic) are the key quality parameters of cotton fiber.In this study,182 upland cotton

Research Progress on the Pharmacological Effects and Quality Analysis Methods of Bupleurum

Bupleurum has been used as traditional medicine in China,Japan,South Korea,and other Asian countries for more than 2,000 years.The crude extracts and pure compounds isolated from Bupleurum have a variety of biological activities,such as anti-inflammatory,anti-cancer,antipyretic,antibacterial,anti-viral,liver protection,neuroprotection,and immune regxilation.The pharmacological effects of Bupleurum have been classified and summarized in this paper by consulting literatures at home and abroad.At the same time,the quality analysis methods of bupleurum,including high-performance liquid chromatography,thin layer chromatography,ultra-high-performance liquid chromatography mass spectrometry,UPLC-QTOF-MS,and so on,are discussed.This paper provides a reference for further research,development,and application of Bupleurum.