DECISION-MAKING OF SLICING SCHEME IN FUSED DEPOSITION MODELING PROCESS BASED ON ANALYTICAL HIERARCHICAL PROCESS

Based on analyzing the influences of a slicing scheme on stair-stepping effect, supporting structure, efficiency and deformation, etc. , analytical hierarchical process （AHP） combining with fuzzy synthetic evaluation is introduced to make decision in slicing schemes for a processing part. The application in determining the slicing scheme for a computer mouse during prototyping shows that the method increases the rationality during decision- making and improves quality and efficiency for the prototyping part.

A hierarchical algorithm for cyberspace situational awareness based on analytic hierarchy process

The existing network security management systems are unable either to provide users with useful security situation and risk assessment, or to aid administrators to make right and timely decisions based on the current state of network. These disadvantages always put the whole network security management at high risk. This paper establishes a simulation environment, captures the alerts as the experimental data and adopts statistical analysis to seek the vulnerabilities of the services provided by the hosts in the network. According to the factors of the network, the paper introduces the two concepts： Situational Meta and Situational Weight to depict the total security situation. A novel hierarchical algorithm based on analytic hierarchy process （AHP） is proposed to analyze the hierarchy of network and confirm the weighting coefficients. The algorithm can be utilized for modeling security situation, and determining its mathematical expression. Coupled with the statistical results, this paper simulates the security situational trends. Finally, the analysis of the simulation results proves the algorithm efficient and applicable, and provides us with an academic foundation for the implementation in the security situation

Mapping favorable groundwater potential recharge zones using a GIS-based analytical hierarchical process and probability frequency ratio model:A case study from an agro-urban region of Pakistan

In Punjab(Pakistan),the increasing population and expansion of land use for agriculture have severely exploited the regional groundwater resources.Intensive pumping has resulted in a rapid decline in the level of the water table as well as its quality.Better management practices and artificial recharge are needed for the development of sustainable groundwater resources.This study proposes a methodology to delineate favorable groundwater potential recharge zones(FPRI)by integrating maps of groundwater potential recharge index(PRI)with the DRASTIC-based groundwater vulnerability index(VI).In order to evaluate both indexes,different thematic layers corresponding to each index were overlaid in ArcGIS.In the overlay analysis,the weights(for various thematic layers)and rating values(for sub-classes)were allocated based on a review of published literature.Both were then normalized and modified using the analytical hierarchical process(AHP)and a frequency ratio model respectively.After evaluating PRI and FPRI,these maps were validated using the area under the curve(AUC)method.The PRI map indicates that 53%of the area assessed exists in very low to low recharge zones,22%in moderate,and 25%in high to excellent potential recharge zones.The VI map indicates that 38%of the area assessed exists in very low to low vulnerability,33%in moderate,and 29%in high to very high vulnerability zones.The FPRI map shows that the central region of Punjab is moderately-to-highly favorable for recharge due to its low vulnerability and high recharge potential.During the validation process,it was found that the AUC estimated with modified weights and rating values was 79%and 67%,for PRI and VI indexes,respectively.The AUC was less when evaluated using original weights and rating values taken from published literature.Maps of favorable groundwater potential recharge zones are helpful for planning and implementation of wells and hydraulic structures in this region.

PERFORMANCE EVALUATION METHOD FOR BUSINESS PROCESS OF MACHINERY MANUFACTURER BASED ON DEA/AHP HYBRID MODEL

A set of indices for performance evaluation for business processes with multiple inputs and multiple outputs is proposed, which are found in machinery manufacturers. Based on the traditional methods of data envelopment analysis （DEA） and analytical hierarchical process （AHP）, a hybrid model called DEA/AHP model is proposed to deal with the evaluation of business process performance. With the proposed method, the DEA is firstly used to develop a pairwise comparison matrix, and then the AHP is applied to evaluate the performance of business process using the pairwise comparison matrix. The significant advantage of this hybrid model is the use of objective data instead of subjective human judgment for performance evaluation. In the case study, a project of business process reengineering （BPR） with a hydraulic machinery manufacturer is used to demonstrate the effectiveness of the DEA/AHP model.

Using geospatial technologies to delineate Ground Water Potential Zones(GWPZ)in Mberengwa and Zvishavane District,Zimbabwe

The main objective of the study was to delineate Ground Water Potential Zones(GWPZ)in Mberengwa and Zvishavane districts,Zimbabwe,utilizing geospatial technologies and thematic mapping.Various factors,including geology,soil,rainfall,land use/land cover,drainage density,lineament density,slope,Terrain Ruggedness Index(TRI),and Terrain Wetness Index(TWI),were incorporated as thematic layers.The Multi Influencing Factor(MIF)and Analytical Hierarchical Process(AHP)techniques were employed to assign appropriate weights to these layers based on their relative significance,prioritizing GWPZ mapping.The integration of these weighted layers resulted in the generation of five GWPZ classes:Very high,high,moderate,low,and very low.The MIF method identified 3%of the area as having very high GWPZ,19%as having high GWPZ,40%as having moderate GWPZ,24%as having low GWPZ,and 14%as having very low GWPZ.The AHP method yielded 2%for very high GWPZ,14%for high GWPZ,37%for moderate GWPZ,37%for low GWPZ,and 10%for very low GWPZ.A strong correlation(ρof 0.91)was observed between the MIF results and groundwater yield.The study successfully identified regions with abundant groundwater,providing valuable target areas for groundwater exploitation and highvolume water harvesting initiatives.Accurate identification of these crucial regions is essential for effective decision-making,planning,and management of groundwater resources to alleviate water shortages.

Studies on Multi-Criteria Decision-Making-Based Healthcare Systems Using the Machine Learning

There is a lot of information in healthcare and medical records.However,it is challenging for humans to turn data into information and spot hidden patterns in today’s digitally based culture.Effective decision support technologies can help medical professionals find critical information concealed in voluminous data and support their clinical judgments and in different healthcare management activities.This paper presented an extensive literature survey for healthcare systems using machine learning based on multi-criteria decision-making.Various existing studies are considered for review,and a critical analysis is being done through the reviews study,which can help the researchers to explore other research areas to cater for the need of the field.

Evaluation model for freeway incident management system

In order to evaluate the general situation and find special problems of the freeway incident management system, an evaluation model is proposed. First, the expert appraisal approach is used to select the primary evaluation index. As a result, 81 indices and the hierarchical structures of the index such as the object layer, the sub-object layer, the criterion layer and the index layer are determined. Then, based on the fuzzy characteristics of each index layer, the analytical hierarchy process（AHP）and the fuzzy comprehensive evaluation are applied to generate the weight and the satisfaction of the index and the criterion layers. When analyzing the relationship between the sub-object layer and the object layer, it is easy to find that the number of sub-objects is too large and sub-objects are significantly redundant. The partial least square （PLS） is proposed to solve the problems. Finally, an application example, whose result has already been accepted and employed as the indication of a new project in improving incident management, is introduced and the result verifies the feasibility and efficiency of the model.

Landslide initiation and runout susceptibility modeling in the context of hill cutting and rapid urbanization: a combined approach of weights of evidence and spatial multicriteria

Rainfall induced landslides are a common threat to the communities living on dangerous hillslopes in Chittagong Metropolitan Area, Bangladesh. Extreme population pressure, indiscriminate hill cutting, increased precipitation events due to global warming and associated unplanned urbanization in the hills are exaggerating landslide events. The aim of this article is to prepare a scientifically accurate landslide susceptibility map by combining landslide initiation and runout maps. Land cover, slope, soil permeability, surface geology, precipitation, aspect, and distance to hill cut, road cut, drainage and stream network factor maps were selected by conditional independence test. The locations of 56 landslides were collected by field surveying. A weight of evidence(Wo E) method was applied to calculate the positive(presence of landslides) and negative(absence of landslides) factor weights. A combination of analytical hierarchical process(AHP) and fuzzymembership standardization(weighs from 0 to 1) was applied for performing a spatial multi-criteria evaluation. Expert opinion guided the decision rule for AHP. The Flow-R tool that allows modeling landslide runout from the initiation sources was applied. The flow direction was calculated using the modified Holmgren's algorithm. The AHP landslide initiation and runout susceptibility maps were used to prepare a combined landslide susceptibility map. The relative operating characteristic curve was used for model validation purpose. The accuracy of Wo E, AHP, and combined susceptibility map was calculated 96%, 97%, and 98%, respectively.

Delineation of groundwater potential zones in Wadi Saida Watershed of NW-Algeria using remote sensing,geographic information system-based AHP techniques and geostatistical analysis

Sustainable management of groundwater resources has now become an obligation,especially in arid and semi-arid regions given the socio-economic importance of this resource.The optimization in zoning for groundwater exploitation helps in planning and managing groundwater supply works such as boreholes and wells in the catchment.The objective of this study is to use remote sensing and GIS-based Analytical Hierarchy Process(AHP)techniques to evaluate the groundwater potential of Wadi Saida Watershed.Spatial analysis such as geostatistics was also used to validate results and ensure more accuracy.Through the GIS tools and remote sensing technique,earth observation data were converted into thematic layers such as lineament density,geology,drainage density,slope,land use and rainfall,which were combined to delineate groundwater potential zones.Based on their respective impact on groundwater potential,the AHP approach was adopted to assign weights on multi-influencing factors.These results will enable decision-makers to optimize hydrogeological exploration in large-scale catchment areas and map areas.According to the results,the southern part of the Wadi Saida Watershed is characterized as a higher groundwater potential area,where 32%of the total surface area falls in the excellent and good class of groundwater potential.The validation process revealed a 71%agreement between the estimated and actual yield of the existing boreholes in the study area.

An Integrated Framework for Cloud Service Selection Based on BOM and TOPSIS

Many businesses have experienced difficulties in selecting a cloud service provider(CSP)due to the rapid advancement of cloud computing services and the proliferation of CSPs.Many independent criteria should be considered when evaluating the services provided by different CSPs.It is a case of multi-criteria decision-making(MCDM).This paper presents an integrated MCDM cloud service selection framework for determining the most appropriate service provider based on the best only method(BOM)and technique for order of preference by similarity to ideal solution(TOPSIS).To obtain the weights of criteria and the relative importance of CSPs based on each criterion,BOM performs pairwise comparisons of criteria and also for alternatives on each criterion,and TOPSIS uses these weights to rank cloud alternatives.An evaluation and validation of the proposed framework have been carried out through a use-case model to prove its efficiency and accuracy.Moreover,the developed framework was compared with the analytical hierarchical process(AHP),a popular MCDM approach,based on two perspectives:efficiency and consistency.According to the research results,the proposed framework only requires 25%of the comparisons needed for the AHP approach.Furthermore,the proposed framework has a CR of 0%,whereas AHP has 38%.Thus,the proposed framework performs better than AHPwhen it comes to computation complexity and consistency,implying that it is more efficient and trustworthy.

An Assessment and Identification of Avalanche Hazard Sites in Uri Sector and its Surroundings on Himalayan Mountain

Avalanches are one of the most natural hazard in the mountain areas and therefore, identification of avalanche hazard is necessary for planning future development activities. The study area falls under the international boundary region which generally covered by the snow(38%) on high altitude regions of the western part of Himalayas. Avalanches are triggered in study area during snowfall resulting in loss of human life, property and moreover the transportation and communication affected by the debris which ultimately delays the relief measures. Therefore in this study three major causative parameters i.e terrain, ground cover and meteorological have been incorporated for the identification of avalanche hazard zones(AHZ) by integrating Analytical Hierarchical Process(AHP) method in Geographical Information System(GIS). In the first part of study, avalanche sites have been identified by the criteria related to terrain(slope, aspect and curvature) and ground cover. Weights and ratings to these causative factors and their cumulative effects have been assigned on the basis of experience and knowledge of field. In the second part of the study, single point interpolation and Inverse Distance Weighted(IDW) method has been employed as only one weather station falls in study area. Accordingly, it has been performed to generate the meteorological parameter maps(viz. air temperature and relative humidity) from the field observatories and Automatic Weather Stations(AWS) located at Baaj OP in Uri sector. Finally, the meteorological parameter maps were superimposed on the terrain-based avalanche hazard thematic layers to identify the dynamic avalanche hazard sites. Conventional weighted approach and Analytical Hierarchical Process(AHP) method have been implemented for the identification of AHZ that shows approximately 55% area under maximum hazard zone. Further, the results were validated by overlapping the existing registered avalanche sites. The sites were identified through field survey and avalanche data card followed by its delineation from the toposheet(1:50,000 scale). Interestingly study found that 28% area under moderate and maximum AHZ correlated well with registered avalanche sites when they were overlapped. The accuracy for such works can be increased by field survey under favorable weather condition and by adding data from more number of AWS for predicting avalanche hazards in mountainous regions.

Application of Fuzzy Mathematics in the Evaluation of Textbooks in institutions of Higher Learning

The article first combines fuzzy mathematics with the analytic hierarchy process (AHP),putting forth the mathematical model of evaluation Of the textbook in institutions of higher learning.Three textbooks will be cited as examples of analysis of practical application. And it is considered that the Fuzzy mathematical model is an important means of evaluation of textbooks in institutions of higher learning.